Hydrophobic Inorganic Oxide Pigments via Polymethylhydrosiloxane Grafting: Dispersion in Aqueous Solution at Extraordinarily High Solids Concentrations.

Building on the recent demonstration of aqueous-dispersible hydrophobic pigments that retain their surface hydrophobicity even after drying, we demonstrate the synthesis of surface-modified Ti-Pure R-706 (denoted R706) titanium dioxide-based pigments, consisting of a thin (one to three monolayers) grafted polymethylhydrosiloxane (PMHS) coating, which (i) are hydrophobic in the dry state according to capillary rise and dynamic vapor sorption measurements and (ii) form stable aqueous dispersions at solid contents exceeding 75 wt % (43 vol %), without added dispersant, displaying similar rheology to R706 native oxide pigments at 70 wt % (37 vol %) consisting of an optimal amount of conventional polyanionic dispersant (0.3 wt % on pigment basis). The surface-modified pigments have been characterized via 29Si and 13C cross-polarization/magic angle spinning solid-state NMR spectroscopy; infrared spectroscopy; thermogravimetric and elemental analyses; and ζ potential measurements. On the basis of these data, the stability of the surface-modified PMHS-R706 aqueous dispersions is attributed to steric effects, as a result of grafted PMHS strands on the R706 surface, and depends on the chaotropic nature of the base used during PMHS condensation to the pigment/polysiloxane interface. The lack of water wettability of the surface-modified oxide particles in their dry state translates to improved water-barrier properties in coatings produced with these surface-modified pigment particles. The synthetic approach appears general as demonstrated by its application to various inorganic-oxide pigment particles.

Productive and reproductive performance of Dawuro highland sheep managed under community-based breeding program in Ethiopia.

The objective of this study was to evaluate growth and reproductive performance of highland Dawuro sheep population managed under a community-based breeding program in Ethiopia. Records used in the study were collected over 6 years (2017-2022). In the current study, 3554 records were considered. Studied traits were birth weight (BWT), 3-month weight (WWT), 6-month weight (SMWT), daily gain from birth to weaning (ADG0-3), daily gains from weaning to 6-month age(ADG3-6), litter size(LS), lambing interval (LI), and annual reproductive rates(ARR). The data were analyzed using general linear models of SAS software. The overall least squares mean (LSM± SE) for BWT, WWT, SMWT, ADG0-3, and ADG3-6 were 2.69±0.02; 14.6±0.49, 22.8±0.22 kg, 128.05±2.27 gram (g), and 71.5±0.23 gram respectively. Site difference exerted significantly on BWT, WWT, and SMWT. The result of WWT and SMWT results of Dawuro sheep were comparable with previously reported known Ethiopian sheep breeds. The overall least squares mean ± standard error of LS, LI and, ARR were 1.67±0.04 lambs, 239±31.91 days, and 2.19±0.06 lambs, respectively. WWT and SMWT traits showed good responses to selection. The general implication of the result to future improvement program was continue selection, strengthening the existing breeder cooperatives, integration of full animal health, feed packages, conservation of prolific flocks, improving the management of animals, expanding the current CBBP to adjacent potential kebele, create market linkage and scaling out the existing best practice to a new sites.

Insights into the behavior of ethylene oxide-1,2-epoxybutane diblock copolymers in water as a function of temperature and the presence of colloidal silica.

HYPOTHESIS: Nonionic surfactants have been widely used for many consumer products and industrial processes, and their applications often involve temperature-cycling across cloud point temperature (Tcloud). To explore the behavior of nonionic surfactants across Tcloud and when mixed with colloidal silica at a very dilute concentration around 0.1 wt%, a series of 1,2-epoxybutane-capped alcohol ethoxylates (BAEs) with various cloud points is used as a model system. EXPERIMENTS: BAEs with cloud points from 15 to 64 °C were successfully prepared by varying the lengths of 1,2-epoxybutane (BO) and ethylene oxide (EO) blocks and their phase behavior across Tcloud was studied using nuclear magnetic resonance spectroscopy (NMR), dynamic light scattering (DLS) and differential scanning calorimetry (DSC). FINDINGS: In the absence of silica, the NMR signals are not greatly affected by the cloud point transition, but both the water and surfactant exhibit a decrease in spin-spin relaxation time once the temperature reaches the Tcloud. In the presence of silica, the NMR spectra indicate significantly reduced mobility of the EO portion relative to the alkyl and BO segments. Furthermore, our results suggest that the BAE surfactants are not fractionally clouding out or precipitating with a portion of the compositional distribution during the cloud point transition.

Wettability Reversal of Hydrophobic Pigment Particles Comprising Nanoscale Organosilane Shells: Concentrated Aqueous Dispersions and Corrosion-Resistant Waterborne Coatings.

We demonstrate the synthesis of polysiloxane-modified inorganic-oxide nanoparticles comprising a TiO2-based pigment (Ti-Pure R-706), which undergo drastic wettability reversal from a hydrophilic wet state to a hydrophobic state upon drying. Furthermore, the dry hydrophobic pigment particles can be reversibly converted back to a hydrophilic form by the application of high shear aqueous milling. Our synthetic approach involves first condensing the cross-linking monomer CH3Si(OH)3 onto the surface of Ti-Pure R-706 at pH 9.5 ± 0.2 in an aqueous suspension. After drying this surface-modified material in the presence of a polyanionic dispersant so as to preserve the primary particle size via dynamic light scattering, it is trimethylsilyl-capped with (CH3)3SiOH, which consumes some residual Si-OH functionalities, and washed to remove all dispersant and excess reagents. Transmission electron microscopy demonstrates a ∼6 nm polysiloxane coating uniformly surrounding the surface of the pigment particle. A 70 wt % (37 vol %) concentrated aqueous slurry of the hydrophobically modified pigment particles prepared in the absence of dispersant exhibits rheological characteristics that are nearly the same as an aqueous dispersion of native unmodified hydrophilic Ti-Pure R-706 comprising an optimal amount of the organic anionic dispersant. It is also possible to synthesize dispersions without the use of an added surfactant and/or dispersant at even higher solid concentrations of up to 75 wt % (43 vol %) in water, conditions at which even the hydrophilic native Ti-Pure R-706 oxide pigment yields a gel-like paste in the absence of a dispersant. Films prepared by drying an aqueous suspension of these pigment particles exhibited a hydrophobic contact angle of ∼125°. When acrylic-based waterborne coatings were prepared comprising these surface-modified Ti Pure R-706 pigments, they showed excellent corrosion protection of a mild steel substrate. These data point to a wettability reversal in which the particles change from hydrophobic to hydrophilic upon high-shear aqueous milling and vice versa upon drying. 29Si CP/MAS NMR spectroscopy highlights the importance of flexibility of the polysiloxane coating for achieving this wettability reversal, a result that emphasizes the importance of surface reconstruction.