Nasalance Scores as a Function of Skeletal Malocclusion of English-Speaking Adults in the North Indian Population.

OBJECTIVE: The objective of this study is quantitative assessment of nasalance for skeletal Class I (normative values), Class II, and III malocclusion in the English language for the North Indian population and to compare the normative values with the nasalance scores obtained from individuals with skeletal Class II and III malocclusion and to evaluate the normative values as a function of gender. MATERIAL AND METHODS: The study was conducted on a total sample of 200 patients with 100, 50, and 50 in group 1 (control group, Skeletal Class I), group 2 (Skeletal Class II), and group 3 (Skeletal Class III), respectively. ANB angle (anteroposterior angle formed by point A, nasion, and point B) measured on lateral cephalogram was used to categorize the patients into 3 groups. The normative nasalance scores were compared for males and females in the control group. The nasalance scores of skeletal Class II and III subjects were compared to the combined normative scores of the control group. The NasalView was used for the objective assessment of nasalance. Oral syllables (/pa/and/pi/), nasal syllables (/ma/and/mi/), and 3 passages (Zoo passage, Rainbow passage, and Nasal sentences) were used to determine the nasalance scores. RESULTS: The intragroup comparison of nasalance scores in group 1 showed statistically significant differences for different stimuli. The gender-related comparison showed no statistically significant differences in nasalance scores. The intergroup comparison of nasalance scores for skeletal malocclusion showed no statistically significant differences for different stimuli except statistically significant lower nasalance values for nasal sentences in group 3 compared to the control group. CONCLUSION: The study concluded that the nasalance scores for nasal sentences in skeletal Class III malocclusion were significantly lower than in the control group and were not statistically significant between the 3 groups for all other stimuli.

Orthodontic emergencies and mental health of patients undergoing orthodontic treatment during COVID-19 pandemic: A questionnaire study.

Objectives: To evaluate the impact of COVID-19 pandemic on orthodontic treatment and mental health of patients undergoing orthodontic treatment and to compare their mental health with the age-matched control group. Materials and methods: 484 orthodontic patients (245 males and 239 females) and 200 age-matched control subjects were divided into two age groups. Group 1 had 14-18 years of adolescents (N = 274) and 100 control participants (Group 2) and Group 3 comprised of 19 years above adults (N = 210) and 100 control participants (Group 4). Group 1 and 3 patients filled the 4 sections of the questionnaire related to orthodontic emergencies (Sections 1-3) and mental distress (Kessler Psychological Distress Scale-Section 4), while groups 2 and 4 were asked to fill only Section-4. The comparison of mental distress on high/low Kessler scores was made using the Chi-Square test/Fisher's exact test. The factors which came out to be significant were put to bivariate logistic regression analysis. Results: The percentage of patients with high Kessler scores among Group 1 and Group 3 were 9.9% and 17.2% respectively, and their differences with age-matched control groups were non-significant. The mean differences of Kessler score were significantly higher for Group 3 compared to group 1. The higher Kessler score was associated with age, higher education, a feeling of concern for non-availability of appointments, increased treatment duration, its effect on the quality of treatment, and sabotaging of definitive future plans. Conclusions: The orthodontic treatment and emergencies may not be a significant factor contributing to increased stress among patients during the lockdown.

Success rate, treatment duration, and pain perception in the management of palatally impacted canines using the K9 and Ballista spring: a randomized clinical trial.

OBJECTIVES: To evaluate the success rate, treatment duration, and pain perceived during forced eruption of maxillary palatally impacted canines using the K9 and Ballista springs. MATERIALS AND METHODS: Thirty unilateral palatal canine impactions of moderate and difficult category as determined by KPG index (score between 10 and 19) were enrolled. Group 1 comprised canine impactions managed with K9 springs, and Group 2 comprised Ballista springs. Block randomization and opaque sealed envelopes were used for allocation. The success rate and treatment duration (application of force to ligation of the impacted canine into the initial alignment archwire) were recorded. Pain perception was evaluated on a 10-point visual analogue scale (VAS) and modified McGill Pain Questionnaire. Chi-square test and Mann-Whitney U-test were used to compare the groups. RESULTS: The success rate for eruption of palatally impacted canines was 100%. The average treatment duration was 296.13 ± 96.45 days and 311.93 ± 94.34 days, respectively for Group 1 and Group 2. VAS scale scores for pain were greater for Group 2 compared to Group1, and the differences were statistically significant at all time intervals except at T1. The frequency of none and mild pain was significantly greater at all time intervals in both groups. CONCLUSIONS: The impacted canines of moderate and difficult category were erupted with a 100% success rate and similar treatment duration with both interventions. The pain scores of Ballista springs were greater after 24 hours of force application.

Evaluation of displacements and stress changes in the maxillo-mandibular complex with fixed functional appliance skeletally anchored on mandible using miniplates: A finite element study.

OBJECTIVES: Fixed functional appliances (FFA) have been used for correction class II malocclusion but cause proclination of teeth. Recently, few studies have advocated the use of skeletal anchorage along with FFAs to prevent this side effect. The purpose of the study was to evaluate the stress distribution and displacements produced by miniplate anchored Forsus-fatigue resistant device on the maxilla, mandible, and the dentition in a Class II malocclusion patient by finite element analysis. MATERIALS AND METHODS: Cone beam computed tomography of a class II division 1 patient indicated for FFA was used to construct a 3D finite element model using MIMICS 8.11 and Hypermesh 13.0 software. Various material properties, boundary, and loading conditions were then applied. The model was analyzed for principal stress and von Mises stress in maxilla, mandible, and their dentition using ANSYS 12.1 software. RESULTS: In the mandible, maximum principal and von Mises stresses were seen in the cortical bone area in the symphyseal region, whereas mandibular teeth showed comparatively lesser stresses. In the maxilla, higher principal and von Mises stresses were seen in the maxillary molar region compared to the maxillary cortical bone. The entire mandible was displaced antero-inferiorly, whereas the maxilla showed a postero-superior displacement. CONCLUSION: Using skeletally anchored FFA results in more stresses and displacements in the skeletal structures compared to the dentition.

3-Dimensional prediction of pre-surgical decompensation after atypical extractions and soft tissue simulation for ortho-surgical management of skeletal Class III malocclusion: A case report.

Three dimensional imaging systems whether in the form of digital models, facial scanning or dolphin software play an important role in proper diagnosis and treatment planning of the orthosurgical cases. This case report highlights importance of three-dimensional treatment planning in the ortho-surgical management of the patient with skeletal Class III malocclusion involving atypical extraction. On clinical examination, patient had concave profile, prominent chin, deficient midface, flat cheekbone contour and prominent nasal projection. He had Class III molar and canine relation bilaterally with missing 12 (previously extracted), negative overbite and overjet with discordant maxillomandibular midlines. After 3-dimensional digital model set-up for occlusion planning and dolphin simulation for soft tissue prediction, extraction of left maxillary lateral incisor was planned followed by maxillary advancement and mandibular setback surgery and finish the occlusion in Class II molar relationship. After the orthodontic and orthognathic surgical treatment, the skeletal and dental imbalance was corrected, and most of the treatment objectives were achieved and patient was extremely satisfied with his facial profile. The treatment results were stable at the 3 years follow-up.

Comparison of reliability, validity, and accuracy of linear measurements made on pre- and posttreatment digital study models with conventional plaster study models.

OBJECTIVES: To compare the accuracy of the linear measurements made on pre- and posttreatment three-dimensional (3D) scanned digital models with conventional plaster study models. MATERIALS AND METHODS: The study was conducted on pre- and posttreatment study models of 132 patients. A 3D model scanner was used to scan the plaster models to form 3D digital models. The measurements were made on the plaster models using digital Vernier calipers, and the 3D digital models were assessed for similar measurement using a software of the model scanner. The intraclass correlation for intraoperator error showed good correlations between the measurements made on conventional plaster models and digital models. RESULTS: Although the comparison of the linear measurements made by conventional and digital methods on both pre- and posttreatment study models using intraclass coefficient showed a good correlation, analysis of variance showed significant mean differences in the measurements of multiple variables in both the groups. The number of variables showing significant differences was more in the pretreatment group. The measurements obtained by Vernier calipers were generally higher than those of scanned pre- and posttreatment study models. CONCLUSION: The linear measurements made by conventional and digital methods showed statistically significant mean differences. The accuracy of recording can be affected by the severity of pretreatment malocclusion, but the deviations were not large enough to contradict the use of the digital models for orthodontic records.

Speech evaluation in children with missing anterior teeth and after prosthetic rehabilitation with fixed functional space maintainer.

INTRODUCTION: Speech and language development in children is a dynamic process. Development of vocal sound into meaningful speech was one of the major discoveries which have made the human beings to reach the pinnacle of the animal kingdom. The ability to speak is determined by the flow of air into the mouth which affects pronunciation of various words and phrases. AIM: This study aimed to evaluate speech changes before and after prosthetic rehabilitation with fixed functional space maintainer in children with missing maxillary anterior teeth. MATERIALS AND METHODS: The study sample comprised of 25 children in the age range of 3-6 years having at least two maxillary anterior teeth indicated for extraction or had already got extracted. Speech therapist evaluated articulation of [v], [ph], [n], [d], [dh], [th], [t], [s.],[s], and [l] speech sounds of patients preoperatively (T0), postoperatively after the appliance insertion (T1), and postoperatively after 7 days (T2) using Weiss Comprehensive Articulation Test. The data obtained were analyzed using Chi-square and Mcnemar's test. RESULTS: There was statistically significant (P < 0.05) correction in [v], [ph], [d], [dh], [th], [t], [s.], and [s] speech sounds immediately after prosthetic rehabilitation (T1). While, the assessment of speech sounds after 7 days of appliance insertion (T2) showed statistically nonsignificant differences. CONCLUSIONS: The results suggested that treatment of a patient with missing anterior teeth should not be restricted to esthetic and functional oral rehabilitation, but also comprehend with the speech, as premature loss of the primary maxillary incisor appears to have long-term effect on the speech development.

PGI Bracket Positioner: A Novel Combination of Reverse Bracket Tweezer and Positioning Gauze.

The accurate bracket positioning is essential for the expression of the bracket system that affects the treatment outcome considerably and is also essential for good functional occlusion as well as facial esthetics. The proper alignment cannot be achieved without proper bracket positioning. Thus, the brackets positioning devices are an integral part of orthodontic armamentarium. Here, we present a new innovation that provides a unique combination of reverse bracket tweezer and positioner and hence is very helpful in precise vertical positioning of brackets with increased efficiency.

Sleeve Push Technique: A Novel Method of Space Gaining.

Space gaining is frequently required in orthodontics. Multiple loops were initially used for space gaining and alignment. The most common used mechanics for space gaining is the use of nickel-titanium open coil springs. The disadvantage of nickel-titanium coil spring is that they cannot be used until the arches are well aligned to receive the stiffer stainless steel wires. Therefore, a new method of gaining space during initial alignment and leveling has been developed and named as sleeve push technique (SPT). The nickel-titanium wires, i.e. 0.012 inches and 0.014 inches along with archwire sleeve (protective tubing) can be used in a modified way to gain space along with alignment. This method helps in gaining space right from day 1 of treatment. The archwire sleeve and nickel-titanium wire in this new SPT act as a mutually synergistic combination and provide the orthodontist with a completely new technique for space opening.