Catalyst and Medium Control over Rebound Pathways in Manganese-Catalyzed Methylenic C-H Bond Oxidation.

The C(sp3)-H bond oxygenation of a variety of cyclopropane containing hydrocarbons with hydrogen peroxide catalyzed by manganese complexes containing aminopyridine tetradentate ligands was carried out. Oxidations were performed in 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) and 2,2,2-trifluoroethanol (TFE) using different manganese catalysts and carboxylic acid co-ligands, where steric and electronic properties were systematically modified. Functionalization selectively occurs at the most activated C-H bonds that are α- to cyclopropane, providing access to carboxylate or 2,2,2-trifluoroethanolate transfer products, with no competition, in favorable cases, from the generally dominant hydroxylation reaction. The formation of mixtures of unrearranged and rearranged esters (oxidation in HFIP in the presence of a carboxylic acid) and ethers (oxidation in TFE) with full control over diastereoselectivity was observed, confirming the involvement of delocalized cationic intermediates in these transformations. Despite such a complex mechanistic scenario, by fine-tuning of catalyst and carboxylic acid sterics and electronics and leveraging on the relative contribution of cationic pathways to the reaction mechanism, control over product chemoselectivity could be systematically achieved. Taken together, the results reported herein provide powerful catalytic tools to rationally manipulate ligand transfer pathways in C-H oxidations of cyclopropane containing hydrocarbons, delivering novel products in good yields and, in some cases, outstanding selectivities, expanding the available toolbox for the development of synthetically useful C-H functionalization procedures.

tert-Butyl as a Functional Group: Non-Directed Catalytic Hydroxylation of Sterically Congested Primary C-H Bonds.

The tert-butyl group is a common aliphatic motif extensively employed to implement steric congestion and conformational rigidity in organic and organometallic molecules. Because of the combination of a high bond dissociation energy (~100 kcal mol-1) and limited accessibility, in the absence of directing groups, neither radical nor organometallic approaches are effective for the chemical modification of tert-butyl C-H bonds. Herein we overcome these limits by employing a highly electrophilic manganese catalyst, [Mn(CF3bpeb)(OTf)2], that operates in the strong hydrogen bond donor solvent nonafluoro-tert-butyl alcohol (NFTBA) and catalytically activates hydrogen peroxide to generate a powerful manganese-oxo species that effectively oxidizes tert-butyl C-H bonds. Leveraging on the interplay of steric, electronic, medium and torsional effects, site-selective and product chemoselective hydroxylation of the tert-butyl group is accomplished with broad reaction scope, delivering primary alcohols as largely dominant products in preparative yields. Late-stage hydroxylation at tert-butyl sites is demonstrated on 6 densely functionalized molecules of pharmaceutical interest. This work uncovers a novel disconnection approach, harnessing tert-butyl as a potential functional group in strategic synthetic planning for complex molecular architectures.

Highly Selective C(sp3)-H Bond Oxygenation at Remote Methylenic Sites Enabled by Polarity Enhancement.

A detailed study on the C(sp3)-H bond oxygenation reactions with H2O2 catalyzed by the [Mn(OTf)2(TIPSmcp)] complex at methylenic sites of cycloalkyl and 1-alkyl substrates bearing 19 different electron-withdrawing functional groups (EW FGs) was carried out. Oxidations in MeCN were compared to the corresponding ones in the strong hydrogen bond donating (HBD) solvents 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) and nonafluoro tert-butyl alcohol (NFTBA). Formation of the products deriving from oxygenation at the most remote methylenic sites was observed, with yields, product ratios (PR) for oxygenation at the most remote over the next methylenic sites, and associated site-selectivities that significantly increased going from MeCN to HFIP and NFTBA. Unprecedented site-selectivities were obtained in the oxidation of cyclohexyl, cycloheptyl, cyclooctyl, 1-pentyl, 1-hexyl, and 1-heptyl substrates, approaching >99%, >99%, 90%, >99%, 93%, and 88% (PR >99, >99, 9.4, >99, 14, and 7.5) with cyclohexyl-2-pyridinecarboxylate, cycloheptyl-2-pyridinecarboxylate, cyclooctyl-4-nitrobenzenesulfonamide, 1-pentyl-3,5-dinitrobenzoate, 1-hexyl-3,5-dinitrobenzoate, and 1-heptyl-3,5-dinitrobenzoate, respectively. The results are rationalized on the basis of a polarity enhancement effect via synergistic electronic deactivation of proximal methylenic sites imparted by the EWG coupled to solvent HB. Compared to previous procedures, polarity enhancement provides the opportunity to tune site-selectivity among multiple methylenes in different substrate classes, extending the strong electronic deactivation determined by native EWGs by two carbon atoms. This study uncovers a simple procedure for predictable, high-yielding, and highly site-selective oxidation at remote methylenes of cycloalkyl and 1-alkyl substrates that occurs under mild conditions, with a large substrate scope, providing an extremely powerful tool to be implemented in synthetically useful procedures.

Radical and Cationic Pathways in C(sp3)-H Bond Oxygenation by Dioxiranes of Bicyclic and Spirocyclic Hydrocarbons Bearing Cyclopropane Moieties.

A product and DFT computational study on the reactions of 3-ethyl-3-(trifluoromethyl)dioxirane (ETFDO) with bicyclic and spirocyclic hydrocarbons bearing cyclopropyl groups was carried out. With bicyclo[n.1.0]alkanes (n = 3-6), diastereoselective formation of the alcohol product derived from C2-H bond hydroxylation was observed, accompanied by smaller amounts of products derived from oxygenation at other sites. With 1-methylbicyclo[4.1.0]heptane, rearranged products were also observed in addition to the unrearranged products deriving from oxygenation at the most activated C2-H and C5-H bonds. With spiro[2.5]octane and 6-tert-butylspiro[2.5]octane, reaction with ETFDO occurred predominantly or exclusively at the axial C4-H to give unrearranged oxygenation products, accompanied by smaller amounts of rearranged bicyclo[4.2.0]octan-1-ols. The good to outstanding site-selectivities and diastereoselectivities are paralleled by the calculated activation free energies for the corresponding reaction pathways. Computations show that the σ* orbitals of the bicyclo[n.1.0]alkane cis or trans C2-H bonds and spiro[2.5]octanes axial C4-H bond hyperconjugatively interact with the Walsh orbitals of the cyclopropane ring, activating these bonds toward HAT to ETFDO. The detection of rearranged oxygenation products in the oxidation of 1-methylbicyclo[4.1.0]heptane, spiro[2.5]octane, and 6-tert-butylspiro[2.5]octane provides unambiguous evidence for the involvement of cationic intermediates in these reactions, representing the first examples on the operation of ET pathways in dioxirane-mediated C(sp3)-H bond oxygenations. Computations support these findings, showing that formation of cationic intermediates is associated with specific stabilizing hyperconjugative interactions between the incipient carbon radical and the cyclopropane C-C bonding orbitals that trigger ET to the incipient dioxirane derived 1,1,1-trifluoro-2-hydroxy-2-butoxyl radical.

C-H Bonds as Functional Groups: Simultaneous Generation of Multiple Stereocenters by Enantioselective Hydroxylation at Unactivated Tertiary C-H Bonds.

Enantioselective C-H oxidation is a standing chemical challenge foreseen as a powerful tool to transform readily available organic molecules into precious oxygenated building blocks. Here, we describe a catalytic enantioselective hydroxylation of tertiary C-H bonds in cyclohexane scaffolds with H2O2, an evolved manganese catalyst that provides structural complementary to the substrate similarly to the lock-and-key recognition operating in enzymatic active sites. Theoretical calculations unveil that enantioselectivity is governed by the precise fitting of the substrate scaffold into the catalytic site, through a network of complementary weak non-covalent interactions. Stereoretentive C(sp3)-H hydroxylation results in a single-step generation of multiple stereogenic centers (up to 4) that can be orthogonally manipulated by conventional methods providing rapid access, from a single precursor to a variety of chiral scaffolds.

Highly Enantioselective Catalytic Lactonization at Nonactivated Primary and Secondary γ-C-H Bonds.

Chiral oxygenated aliphatic moieties are recurrent in biological and pharmaceutically relevant molecules and constitute one of the most versatile types of functionalities for further elaboration. Herein we report a protocol for straightforward and general access to chiral γ-lactones via enantioselective oxidation of strong nonactivated primary and secondary C(sp3)-H bonds in readily available carboxylic acids. The key enabling aspect is the use of robust sterically encumbered manganese catalysts that provide outstanding enantioselectivities (up to >99.9%) and yields (up to 96%) employing hydrogen peroxide as the oxidant. The resulting γ-lactones are of immediate interest for the preparation of inter alia natural products and recyclable polymeric materials.

Electronic control over site-selectivity in hydrogen atom transfer (HAT) based C(sp3)-H functionalization promoted by electrophilic reagents.

The direct functionalization of C(sp3)-H bonds represents one of the most investigated approaches to develop new synthetic methodology. Among the available strategies for intermolecular C-H bond functionalization, increasing attention has been devoted to hydrogen atom transfer (HAT) based procedures promoted by radical or radical-like reagents, that offer the opportunity to introduce a large variety of atoms and groups in place of hydrogen under mild conditions. Because of the large number of aliphatic C-H bonds displayed by organic molecules, in these processes control over site-selectivity represents a crucial issue, and the associated factors have been discussed. In this review article, attention will be devoted to the role of electronic effects on C(sp3)-H bond functionalization site-selectivity. Through an analysis of the recent literature, a detailed description of the HAT reagents employed in these processes, the associated mechanistic features and the selectivity patterns observed in the functionalization of substrates of increasing structural complexity will be provided.

Resolving Oxygenation Pathways in Manganese-Catalyzed C(sp3)-H Functionalization via Radical and Cationic Intermediates.

The C(sp3)-H bond oxygenation of the cyclopropane-containing mechanistic probes 6-tert-butylspiro[2.5]octane and spiro[2.5]octane with hydrogen peroxide catalyzed by manganese complexes bearing aminopyridine tetradentate ligands has been studied. Mixtures of unrearranged and rearranged oxygenation products (alcohols, ketones, and esters) are obtained, suggesting the involvement of cationic intermediates and the contribution of different pathways following the initial hydrogen atom transfer-based C-H bond cleavage step. Despite such a complex mechanistic scenario, a judicious choice of the catalyst structure and reaction conditions (solvent, temperature, and carboxylic acid) could be employed to resolve these oxygenation pathways, leading, with the former substrate, to conditions where a single unrearranged or rearranged product is obtained in good isolated yield. Taken together, the work demonstrates an unprecedented ability to precisely direct the chemoselectivity of the C-H oxidation reaction, discriminating among multiple pathways. In addition, these results conclusively demonstrate that stereospecific C(sp3)-H oxidation can take place via a cationic intermediate and that this path can become exclusive in governing product formation, expanding the available toolbox of aliphatic C-H bond oxygenations. The implications of these findings are discussed in the framework of the development of synthetically useful C-H functionalization procedures and the associated mechanistic features.

Hydrogen Abstraction by Alkoxyl Radicals: Computational Studies of Thermodynamic and Polarity Effects on Reactivities and Selectivities.

Density functional theory calculations (ωB97X-D) are reported for the reactions of methoxy, tert-butoxy, trichloroethoxy, and trifluoroethoxy radicals with a series of 26 C-H bonds in different environments characteristic of a variety of hydrocarbons and substituted derivatives. The variations in activation barriers are analyzed with modified Evans-Polanyi treatments to account for polarity and unsaturation effects. The treatments by Roberts and Steel and by Mayer have inspired the development of a simple treatment involving the thermodynamics of reactions, the difference between the reactant radical and product radical electronegativities, and the absence or presence of α-unsaturation. The three-parameter equation (ΔH⧧ = 0.52ΔHrxn(1 - d) - 0.35ΔχAB2 + 10.0, where d = 0.44 when there is α-unsaturation to the reacting C-H bond), correlates well with quantum mechanically computed barriers and shows the quantitative importance of the thermodynamics of reactions (dictated by the reactant and the product bond dissociation energies) and polar effects.

Carboxylic Acid Directed γ-Lactonization of Unactivated Primary C-H Bonds Catalyzed by Mn Complexes: Application to Stereoselective Natural Product Diversification.

Reactions that enable selective functionalization of strong aliphatic C-H bonds open new synthetic paths to rapidly increase molecular complexity and expand chemical space. Particularly valuable are reactions where site-selectivity can be directed toward a specific C-H bond by catalyst control. Herein we describe the catalytic site- and stereoselective γ-lactonization of unactivated primary C-H bonds in carboxylic acid substrates. The system relies on a chiral Mn catalyst that activates aqueous hydrogen peroxide to promote intramolecular lactonization under mild conditions, via carboxylate binding to the metal center. The system exhibits high site-selectivity and enables the oxidation of unactivated primary γ-C-H bonds even in the presence of intrinsically weaker and a priori more reactive secondary and tertiary ones at α- and ß-carbons. With substrates bearing nonequivalent γ-C-H bonds, the factors governing site-selectivity have been uncovered. Most remarkably, by manipulating the absolute chirality of the catalyst, γ-lactonization at methyl groups in gem-dimethyl structural units of rigid cyclic and bicyclic carboxylic acids can be achieved with unprecedented levels of diastereoselectivity. Such control has been successfully exploited in the late-stage lactonization of natural products such as camphoric, camphanic, ketopinic, and isoketopinic acids. DFT analysis points toward a rebound type mechanism initiated by intramolecular 1,7-HAT from a primary γ-C-H bond of the bound substrate to a highly reactive MnIV-oxyl intermediate, to deliver a carbon radical that rapidly lactonizes through carboxylate transfer. Intramolecular kinetic deuterium isotope effect and 18O labeling experiments provide strong support to this mechanistic picture.

Factors Governing Reactivity and Selectivity in Hydrogen Atom Transfer from C(sp3)-H Bonds of Nitrogen-Containing Heterocycles to the Cumyloxyl Radical.

A kinetic study of the hydrogen atom transfer (HAT) reactions from nitrogen-containing heterocycles (secondary and tertiary lactams, 2-imidazolidinones, 2-oxazolidinones, and succinimides) to the cumyloxyl radical has been carried out employing laser flash photolysis with ns time resolution. HAT occurs from the C-H bonds that are α to nitrogen, activated by hyperconjugative overlap with the N-C═O π system. In the lactam series, the second-order HAT rate constant (kH) was observed to decrease by a factor of ∼4 going from the five- and six-membered ring derivatives to the eight-membered ones, a behavior that was rationalized on the basis of a reduced extent of hyperconjugative activation associated to the greater flexibility of the larger rings compared to the smaller ones. In the five-membered-ring substrate series, the kH values were observed to increase by >3 orders of magnitude on going from succinimide to 2-imidazolidinones, a behavior that was explained in terms of the divergent contribution of hyperconjugative activation and deactivating electronic effects determined by ring functionalities. The results are discussed in the framework of the development of HAT-based C-H bond functionalization procedures.

Bimodal Evans-Polanyi Relationships in Hydrogen Atom Transfer from C(sp3)-H Bonds to the Cumyloxyl Radical. A Combined Time-Resolved Kinetic and Computational Study.

The applicability of the Evans-Polanyi (EP) relationship to HAT reactions from C(sp3)-H bonds to the cumyloxyl radical (CumO•) has been investigated. A consistent set of rate constants, kH, for HAT from the C-H bonds of 56 substrates to CumO•, spanning a range of more than 4 orders of magnitude, has been measured under identical experimental conditions. A corresponding set of consistent gas-phase C-H bond dissociation enthalpies (BDEs) spanning 27 kcal mol-1 has been calculated using the (RO)CBS-QB3 method. The log kH' vs C-H BDE plot shows two distinct EP relationships, one for substrates bearing benzylic and allylic C-H bonds (unsaturated group) and the other one, with a steeper slope, for saturated hydrocarbons, alcohols, ethers, diols, amines, and carbamates (saturated group), in line with the bimodal behavior observed previously in theoretical studies of reactions promoted by other HAT reagents. The parallel use of BDFEs instead of BDEs allows the transformation of this correlation into a linear free energy relationship, analyzed within the framework of the Marcus theory. The ΔG⧧HAT vs ΔG°HAT plot shows again distinct behaviors for the two groups. A good fit to the Marcus equation is observed only for the saturated group, with λ = 58 kcal mol-1, indicating that with the unsaturated group λ must increase with increasing driving force. Taken together these results provide a qualitative connection between Bernasconi's principle of nonperfect synchronization and Marcus theory and suggest that the observed bimodal behavior is a general feature in the reactions of oxygen-based HAT reagents with C(sp3)-H donors.

Deciphering Reactivity and Selectivity Patterns in Aliphatic C-H Bond Oxygenation of Cyclopentane and Cyclohexane Derivatives.

A kinetic, product, and computational study on the reactions of the cumyloxyl radical with monosubstituted cyclopentanes and cyclohexanes has been carried out. HAT rates, site-selectivities for C-H bond oxidation, and DFT computations provide quantitative information and theoretical models to explain the observed patterns. Cyclopentanes functionalize predominantly at C-1, and tertiary C-H bond activation barriers decrease on going from methyl- and tert-butylcyclopentane to phenylcyclopentane, in line with the computed C-H BDEs. With cyclohexanes, the relative importance of HAT from C-1 decreases on going from methyl- and phenylcyclohexane to ethyl-, isopropyl-, and tert-butylcyclohexane. Deactivation is also observed at C-2 with site-selectivity that progressively shifts to C-3 and C-4 with increasing substituent steric bulk. The site-selectivities observed in the corresponding oxidations promoted by ethyl(trifluoromethyl)dioxirane support this mechanistic picture. Comparison of these results with those obtained previously for C-H bond azidation and functionalizations promoted by the PINO radical of phenyl and tert-butylcyclohexane, together with new calculations, provides a mechanistic framework for understanding C-H bond functionalization of cycloalkanes. The nature of the HAT reagent, C-H bond strengths, and torsional effects are important determinants of site-selectivity, with the latter effects that play a major role in the reactions of oxygen-centered HAT reagents with monosubstituted cyclohexanes.

General Access to Modified α-Amino Acids by Bioinspired Stereoselective γ-C-H Bond Lactonization.

α-Amino acids represent a valuable class of natural products employed as building blocks in biological and chemical synthesis. Because of the limited number of natural amino acids available, and of their widespread application in proteomics, diagnosis, drug delivery and catalysis, there is an increasing demand for the development of procedures for the preparation of modified analogues. Herein, we show that the use of bioinspired manganese catalysts and H2 O2 under mild conditions, provides access to modified α-amino acids via γ-C-H bond lactonization. The system can efficiently target 1°, 2° and 3° γ-C-H bonds of α-substituted and achiral α,α-disubstituted α-amino acids with outstanding site-selectivity, good to excellent diastereoselectivity and (where applicable) enantioselectivity. This methodology may be considered alternative to well-established organometallic procedures.

Practical and Selective sp3 C-H Bond Chlorination via Aminium Radicals.

The introduction of chlorine atoms into organic molecules is fundamental to the manufacture of industrial chemicals, the elaboration of advanced synthetic intermediates and also the fine-tuning of physicochemical and biological properties of drugs, agrochemicals and polymers. We report here a general and practical photochemical strategy enabling the site-selective chlorination of sp3 C-H bonds. This process exploits the ability of protonated N-chloroamines to serve as aminium radical precursors and also radical chlorinating agents. Upon photochemical initiation, an efficient radical-chain propagation is established allowing the functionalization of a broad range of substrates due to the large number of compatible functionalities. The ability to synergistically maximize both polar and steric effects in the H-atom transfer transition state through appropriate selection of the aminium radical has provided the highest known selectivity in radical sp3 C-H chlorination.

Enantioselective C-H Lactonization of Unactivated Methylenes Directed by Carboxylic Acids.

The formidable challenges of controlling site-selectivity, enantioselectivity, and product chemoselectivity make asymmetric C-H oxidation a generally unsolved problem for nonenzymatic systems. Discrimination between the two enantiotopic C-H bonds of an unactivated methylenic group is particularly demanding and so far unprecedented, given the similarity between their environments and the facile overoxidation of the initially formed hydroxylation product. Here we show that a Mn-catalyzed C-H oxidation directed by carboxylic acids can overcome these challenges to yield γ-lactones in high enantiomeric excess (up to 99%) using hydrogen peroxide as oxidant and a Brønsted acid additive under mild conditions and short reaction times. Coordination of the carboxylic acid group to the bulky Mn complex ensures the rigidity needed for high enantioselectivity and dictates the outstanding γ site-selectivity. When the substrate contains nonequivalent γ-methylenes, the site-selectivity for lactonization can be rationally predicted on the basis of simple C-H activation/deactivation effects exerted by proximal substituents. In addition, discrimination of diastereotopic C-H bonds can be modulated by catalyst design, with no erosion of enantiomeric excess. The potential of this reaction is illustrated in the concise synthesis of a tetrahydroxylated bicyclo[3.3.1]nonane enabled by two key, sequential γ-C-H lactonizations, with the latter that fixes the chirality of five stereogenic centers in one step with 96% ee.

The Quest for Selectivity in Hydrogen Atom Transfer Based Aliphatic C-H Bond Oxygenation.

Aliphatic C-H bond functionalization is at the frontline of research because it can provide straightforward access to simplified and cost-effective synthetic procedures. A number of these methodologies are based on hydrogen atom transfer (HAT), which, as a consequence of the inert character of C-H bonds, often represents the most challenging step of the overall process. Because the majority of organic molecules contain multiple nonequivalent C-H bonds that display similar chemical properties, differentiating between these bonds with high levels of selectivity represents one of the most challenging issues. Clarification of the factors that govern the relative reactivity of C-H bonds toward HAT reagents is thus of primary importance in order to develop selective functionalization procedures. In this Account we describe, through the combination of kinetic studies employing a genuine HAT reagent such as the cumyloxyl radical, along with oxidations performed with H2O2 and iron or manganese catalysts, our contribution toward the development of selective C-H functionalization methodologies. Despite the different nature of these reagents, an oxygen-centered radical and a metal-oxo species, congruent reactivity and selectivity patterns have emerged, providing strong evidence that both reactions proceed via HAT. Consequently, selectivity in this class of metal catalyzed C-H oxidations can be reasonably predicted and synthetically exploited. Amides have been identified as preferential functional groups for governing selectivity on the basis of electronic, steric, and stereoelectronic effects. Torsional effects have proven moreover to be particularly important C-H directing factors in the oxidation of cyclohexane scaffolds where a delicate balance of these effects, in synergistic combination with catalyst design, enables highly chemoselective and enantioselective oxidations. Medium effects have been also shown to govern the relative HAT reactivity of C-H bonds in proximity to polar, hydrogen bond acceptor (HBA) functional groups. By engaging in hydrogen bonding with these groups, fluorinated alcohols strongly deactivate proximal C-H bonds toward HAT-based oxidation. As a result, alcohols, ethers, amines, and amides, which are electron rich and effective proximal C-H activating groups toward HAT reagents in conventional solvents, become oxidatively robust deactivating functionalities that direct C-H oxidation toward remote positions. These deactivating effects enable moreover the accomplishment of product chemoselective methylenic hydroxylations. Overall, clarification of the factors that govern HAT-based reactions has served to provide unique examples of catalytic methodologies for chemoselective and enantioselective oxidation of nonactivated aliphatic C-H bonds of potential utility in organic synthesis.

Evaluation of Polar Effects in Hydrogen Atom Transfer Reactions from Activated Phenols.

Evaluation of polar effects in hydrogen atom transfer (HAT) processes is made difficult by the fact that in most cases substrates characterized by lower bond dissociation energies (BDEs), activated from an enthalpic point of view, are also more activated by polar effects. In search of an exception to this general rule, we found that the introduction of a methoxy substituent in the 3-position of 2,6-dimethylphenol results in a small increase in the O-H BDE and a decrease of the ionization potential of the phenol. These findings suggest that the enthalpic effect associated with the addition of the m-methoxy group to 2,6-dimethylphenol will decrease reaction rates, while the polar effects will increase reaction rates. Our model analysis of polar effects has been experimentally validated by comparing the reactivity of 2,6-dimethylphenol with that of 2,6-dimethyl-3-methoxyphenol in HAT promoted by a series of radicals (cumyloxyl, galvinoxyl, 2,2-diphenylpycrylhydrazyl, phthalimide- N-oxyl, and benzotriazole- N-oxyl radicals). In line with our predictions, the ratio of HAT rate constants ( kH mOMe/ kHH) is larger in cases where there is a greater contribution of polar effects in the HAT reaction, i.e., in HAT promoted by N-oxyl radicals containing electron-withdrawing groups or when more polar solvents are employed.

Hydrogen Atom Transfer from Alkanols and Alkanediols to the Cumyloxyl Radical: Kinetic Evaluation of the Contribution of α-C-H Activation and ß-C-H Deactivation.

A kinetic study on the reactions of the cumyloxyl radical (CumO•) with a series of alkanols and alkanediols has been carried out. Predominant hydrogen atom transfer (HAT) from the α-C-H bonds of these substrates, activated by the presence of the OH group, is observed. The comparable kH values measured for ethanol and 1-propanol and the increase in kH measured upon going from 1,2-diols to structurally related 1,3- and 1,4-diols is indicative of ß-C-H deactivation toward HAT to the electrophilic CumO•, determined by the electron-withdrawing character of the OH group. No analogous deactivation is observed for the corresponding diamines, in agreement with the weaker electron-withdrawing character of the NH2 group. The significantly lower kH values measured for reaction of CumO• with densely oxygenated methyl pyranosides as compared to cyclohexanol derivatives highlights the role of ß-C-H deactivation. The contribution of torsional effects on reactivity is evidenced by the ∼2-fold increase in kH observed upon going from the trans isomers of 4- tert-butylcyclohexanol and 1,2- and 1,4-cyclohexanediol to the corresponding cis isomers. These results provide an evaluation of the role of electronic and torsional effects on HAT reactions from alcohols and diols to CumO•, uncovering moreover ß-C-H deactivation as a relevant contributor in defining site selectivity.

Activation and Deactivation Strategies Promoted by Medium Effects for Selective Aliphatic C-H Bond Functionalization.

Selective functionalization of unactivated aliphatic C-H bonds represents an important goal of modern synthetic chemistry. Differentiating between such bonds in organic molecules with high levels of selectivity remains a crucial issue, and a profound understanding of even the subtlest reactivity trends is needed. Among the methods that have been developed, those based on hydrogen atom transfer (HAT) have attracted considerable interest. Within this framework, medium effects have proved effective in altering the reactivity and site selectivity in synthetically useful C-H functionalization procedures. In this Review, the mechanistic features behind the available strategies are discussed. It is shown that hydrogen bonding and acid-base interactions can promote C-H bond activation or deactivation toward HAT reagents, thereby providing fine-control over the site selectivity and product chemoselectivity as well as useful guidelines for future development and applications.