Toward Automated Cochlear Implant Fitting Procedures Based on Event-Related Potentials.

OBJECTIVES: Cochlear implants (CIs) restore hearing to the profoundly deaf by direct electrical stimulation of the auditory nerve. To provide an optimal electrical stimulation pattern the CI must be individually fitted to each CI user. To date, CI fitting is primarily based on subjective feedback from the user. However, not all CI users are able to provide such feedback, for example, small children. This study explores the possibility of using the electroencephalogram (EEG) to objectively determine if CI users are able to hear differences in tones presented to them, which has potential applications in CI fitting or closed loop systems. DESIGN: Deviant and standard stimuli were presented to 12 CI users in an active auditory oddball paradigm. The EEG was recorded in two sessions and classification of the EEG data was performed with shrinkage linear discriminant analysis. Also, the impact of CI artifact removal on classification performance and the possibility to reuse a trained classifier in future sessions were evaluated. RESULTS: Overall, classification performance was above chance level for all participants although performance varied considerably between participants. Also, artifacts were successfully removed from the EEG without impairing classification performance. Finally, reuse of the classifier causes only a small loss in classification performance. CONCLUSIONS: Our data provide first evidence that EEG can be automatically classified on single-trial basis in CI users. Despite the slightly poorer classification performance over sessions, classifier and CI artifact correction appear stable over successive sessions. Thus, classifier and artifact correction weights can be reused without repeating the set-up procedure in every session, which makes the technique easier applicable. With our present data, we can show successful classification of event-related cortical potential patterns in CI users. In the future, this has the potential to objectify and automate parts of CI fitting procedures.

Variability of ICA decomposition may impact EEG signals when used to remove eyeblink artifacts.

Despite the growing use of independent component analysis (ICA) algorithms for isolating and removing eyeblink-related activity from EEG data, we have limited understanding of how variability associated with ICA uncertainty may be influencing the reconstructed EEG signal after removing the eyeblink artifact components. To characterize the magnitude of this ICA uncertainty and to understand the extent to which it may influence findings within ERP and EEG investigations, ICA decompositions of EEG data from 32 college-aged young adults were repeated 30 times for three popular ICA algorithms. Following each decomposition, eyeblink components were identified and removed. The remaining components were back-projected, and the resulting clean EEG data were further used to analyze ERPs. Findings revealed that ICA uncertainty results in variation in P3 amplitude as well as variation across all EEG sampling points, but differs across ICA algorithms as a function of the spatial location of the EEG channel. This investigation highlights the potential of ICA uncertainty to introduce additional sources of variance when the data are back-projected without artifact components. Careful selection of ICA algorithms and parameters can reduce the extent to which ICA uncertainty may introduce an additional source of variance within ERP/EEG studies.

Online visualization of brain connectivity.

BACKGROUND: While visualization of brain activity has well established practical applications such as real-time functional mapping or neurofeedback, visual representation of brain connectivity is not widely used. In addition, technically challenging single-trial connectivity estimation may have hindered practical usage of connectivity in online applications. NEW METHOD: In this work, we developed algorithms that are capable of estimating and visualizing (effective) connectivity between independent cortical sources during online EEG recordings. RESULTS: The core routines of our procedure, such as CSPVARICA source extraction and regularized connectivity estimation, are available in our open source Python-based toolbox SCoT. We demonstrate for the first time that online connectivity visualization is feasible. We show this in a feasibility study with twelve participants performing two different tasks, namely motor execution and resting with eyes open or closed. Connectivity patterns were significantly different between two motor tasks in four participants, whereas significant differences between resting task patterns were found in seven participants. COMPARISON WITH EXISTING METHODS: Existing connectivity studies have focused on offline methods. In contrast, there are only a small number of examples in the literature that explored online connectivity estimation. For example, a system based on wearable EEG has been demonstrated to work for one subject, and the Glass Brain project has received considerable attention in popular sciences last year. However, none of these attempts validate their methods on multiple subjects. CONCLUSIONS: Our results show that causal connectivity patterns can be observed online during EEG measurements, which is a first step towards real-time connectivity analysis.

FORCe: Fully Online and Automated Artifact Removal for Brain-Computer Interfacing.

A fully automated and online artifact removal method for the electroencephalogram (EEG) is developed for use in brain-computer interfacing (BCI). The method (FORCe) is based upon a novel combination of wavelet decomposition, independent component analysis, and thresholding. FORCe is able to operate on a small channel set during online EEG acquisition and does not require additional signals (e.g., electrooculogram signals). Evaluation of FORCe is performed offline on EEG recorded from 13 BCI particpants with cerebral palsy (CP) and online with three healthy participants. The method outperforms the state-of the-art automated artifact removal methods Lagged Auto-Mutual Information Clustering (LAMIC) and Fully Automated Statistical Thresholding for EEG artifact Rejection (FASTER), and is able to remove a wide range of artifact types including blink, electromyogram (EMG), and electrooculogram (EOG) artifacts.

Thought-based row-column scanning communication board for individuals with cerebral palsy.

Impairment of an individual's ability to communicate is a major hurdle for active participation in education and social life. A lot of individuals with cerebral palsy (CP) have normal intelligence, however, due to their inability to communicate, they fall behind. Non-invasive electroencephalogram (EEG) based brain-computer interfaces (BCIs) have been proposed as potential assistive devices for individuals with CP. BCIs translate brain signals directly into action. Motor activity is no longer required. However, translation of EEG signals may be unreliable and requires months of training. Moreover, individuals with CP may exhibit high levels of spontaneous and uncontrolled movement, which has a large impact on EEG signal quality and results in incorrect translations. We introduce a novel thought-based row-column scanning communication board that was developed following user-centered design principles. Key features include an automatic online artifact reduction method and an evidence accumulation procedure for decision making. The latter allows robust decision making with unreliable BCI input. Fourteen users with CP participated in a supporting online study and helped to evaluate the performance of the developed system. Users were asked to select target items with the row-column scanning communication board. The results suggest that seven among eleven remaining users performed better than chance and were consequently able to communicate by using the developed system. Three users were excluded because of insufficient EEG signal quality. These results are very encouraging and represent a good foundation for the development of real-world BCI-based communication devices for users with CP.

SCoT: a Python toolbox for EEG source connectivity.

Analysis of brain connectivity has become an important research tool in neuroscience. Connectivity can be estimated between cortical sources reconstructed from the electroencephalogram (EEG). Such analysis often relies on trial averaging to obtain reliable results. However, some applications such as brain-computer interfaces (BCIs) require single-trial estimation methods. In this paper, we present SCoT-a source connectivity toolbox for Python. This toolbox implements routines for blind source decomposition and connectivity estimation with the MVARICA approach. Additionally, a novel extension called CSPVARICA is available for labeled data. SCoT estimates connectivity from various spectral measures relying on vector autoregressive (VAR) models. Optionally, these VAR models can be regularized to facilitate ill posed applications such as single-trial fitting. We demonstrate basic usage of SCoT on motor imagery (MI) data. Furthermore, we show simulation results of utilizing SCoT for feature extraction in a BCI application. These results indicate that CSPVARICA and correct regularization can significantly improve MI classification. While SCoT was mainly designed for application in BCIs, it contains useful tools for other areas of neuroscience. SCoT is a software package that (1) brings combined source decomposition and connectivtiy estimation to the open Python platform, and (2) offers tools for single-trial connectivity estimation. The source code is released under the MIT license and is available online at github.com/SCoT-dev/SCoT.

Exploration of the neural correlates of cerebral palsy for sensorimotor BCI control.

Cerebral palsy (CP) includes a broad range of disorders, which can result in impairment of posture and movement control. Brain-computer interfaces (BCIs) have been proposed as assistive devices for individuals with CP. Better understanding of the neural processing underlying motor control in affected individuals could lead to more targeted BCI rehabilitation and treatment options. We have explored well-known neural correlates of movement, including event-related desynchronization (ERD), phase synchrony, and a recently-introduced measure of phase dynamics, in participants with CP and healthy control participants. Although present, significantly less ERD and phase locking were found in the group with CP. Additionally, inter-group differences in phase dynamics were also significant. Taken together these findings suggest that users with CP exhibit lower levels of motor cortex activation during motor imagery, as reflected in lower levels of ongoing mu suppression and less functional connectivity. These differences indicate that development of BCIs for individuals with CP may pose additional challenges beyond those faced in providing BCIs to healthy individuals.

Single-trial connectivity estimation for classification of motor imagery data.

OBJECTIVE: Many brain-computer interfaces (BCIs) use band power (BP) changes in the electroencephalogram to distinguish between different motor imagery (MI) patterns. Most current approaches do not take connectivity of separated brain areas into account. Our objective is to introduce single-trial connectivity features and apply these features to BCI data. APPROACH: We introduce a procedure for extracting single-trial connectivity estimates from vector autoregressive (VAR) models of independent components in a BCI setting. MAIN RESULTS: In a simulated BCI, we demonstrate that the directed transfer function (DTF) with full-frequency normalization and the direct DTF give classification results similar to BP, while other measures such as the partial directed coherence perform significantly worse. SIGNIFICANCE: We show that single-trial MI classification is possible with connectivity measures extracted from VAR models, and that a BCI could potentially utilize such measures.

On the automated removal of artifacts related to head movement from the EEG.

Contamination of the electroencephalogram (EEG) by artifacts related to head movement is a major cause of reduced signal quality. This is a problem in both neuroscience and other uses of the EEG. To attempt to reduce the influence, on the EEG, of artifacts related to head movement, an accelerometer is placed on the head and independent component analysis is applied to attempt to separate artifacts which are statistically related to head movements. To evaluate the method, EEG and accelerometer measurements are made from 14 individuals with Cerebral palsy attempting to control a sensorimotor rhythm based brain-computer interface. Results show that the approach significantly reduces the influence of head movement related artifacts in the EEG.

On the control of brain-computer interfaces by users with cerebral palsy.

OBJECTIVE: Brain-computer interfaces (BCIs) have been proposed as a potential assistive device for individuals with cerebral palsy (CP) to assist with their communication needs. However, it is unclear how well-suited BCIs are to individuals with CP. Therefore, this study aims to investigate to what extent these users are able to gain control of BCIs. METHODS: This study is conducted with 14 individuals with CP attempting to control two standard online BCIs (1) based upon sensorimotor rhythm modulations, and (2) based upon steady state visual evoked potentials. RESULTS: Of the 14 users, 8 are able to use one or other of the BCIs, online, with a statistically significant level of accuracy, without prior training. Classification results are driven by neurophysiological activity and not seen to correlate with occurrences of artifacts. However, many of these users' accuracies, while statistically significant, would require either more training or more advanced methods before practical BCI control would be possible. CONCLUSIONS: The results indicate that BCIs may be controlled by individuals with CP but that many issues need to be overcome before practical application use may be achieved. SIGNIFICANCE: This is the first study to assess the ability of a large group of different individuals with CP to gain control of an online BCI system. The results indicate that six users could control a sensorimotor rhythm BCI and three a steady state visual evoked potential BCI at statistically significant levels of accuracy (SMR accuracies; mean ± STD, 0.821 ± 0.116, SSVEP accuracies; 0.422 ± 0.069).

A comparison of univariate, vector, bilinear autoregressive, and band power features for brain-computer interfaces.

Selecting suitable feature types is crucial to obtain good overall brain-computer interface performance. Popular feature types include logarithmic band power (logBP), autoregressive (AR) parameters, time-domain parameters, and wavelet-based methods. In this study, we focused on different variants of AR models and compare performance with logBP features. In particular, we analyzed univariate, vector, and bilinear AR models. We used four-class motor imagery data from nine healthy users over two sessions. We used the first session to optimize parameters such as model order and frequency bands. We then evaluated optimized feature extraction methods on the unseen second session. We found that band power yields significantly higher classification accuracies than AR methods. However, we did not update the bias of the classifiers for the second session in our analysis procedure. When updating the bias at the beginning of a new session, we found no significant differences between all methods anymore. Furthermore, our results indicate that subject-specific optimization is not better than globally optimized parameters. The comparison within the AR methods showed that the vector model is significantly better than both univariate and bilinear variants. Finally, adding the prediction error variance to the feature space significantly improved classification results.