Mexican-hat dispersions and high carrier mobility of γ-SnX (X = O, S, Se, Te) single-layers: a first-principles investigation.

The shape of energy dispersions near the band-edges plays a decisive role in the transport properties, especially the carrier mobility, of semiconductors. In this work, we design and investigate the γ phase of tin monoxide and monochalcogenides γ-SnX (X = O, S, Se, and Te) through first-principles simulations. γ-SnX is found to be dynamically stable with phonon dispersions containing only positive phonon frequencies. Due to the hexagonal atomic lattice, the mechanical properties of γ-SnX single-layers are directionally isotropic and their elastic constants meet Born's criterion for mechanical stability. Our calculation results indicate that all four single-layers of γ-SnX are semiconductors with the Mexican-hat dispersions. The biaxial strain not only greatly changes the electronic structures of the γ-SnX single-layers, but also can cause a phase transition from semiconductor to metal. Meanwhile, the effects of an electric field on the electron states of γ-SnX single-layers are insignificant. γ-SnX structures have high electron mobility and their electron mobility is highly directional isotropic along the two transport directions x and y. The findings not only initially introduce the γ phase of group IV-VI compounds, but also serve as a premise for further studies on this material family with potential applications in the future, both theoretically and experimentally.

On the in-plane electronic thermal conductivity of biased nanosheet ß12-borophene.

The unique physical and chemical properties of ß12-borophene stem from the coexistence of the Dirac and triplet fermions. The metallic phase of ß12-borophene transitions to the semiconducting one when it is subjected to a perpendicular electric field or bias voltage. In this work, with the aid of a five-band tight-binding Hamiltonian, the Green's function approach and the Kubo-Greenwood formalism, the electronic thermal conductivity (ETC) of the semiconducting phase of ß12-borophene is studied. Two homogeneous (H) and inversion symmetric (IS) models are considered depending on the interaction of the substrate and boron atoms. In addition, due to the anisotropic structure of ß12-borophene, the swapping effect of bias poles is addressed. First of all, we find the pristine ETCIS < ETCH independent of the temperature. Furthermore, a decrease of 74.45% (80.62%) is observed for ETCH (ETCIS) when strong positive bias voltages are applied, while this is 25.2% (47.48%) when applying strong negative bias voltages. Moreover, the shoulder temperature of both models increases (fluctuates) with the positive (negative) bias voltage. Our numerical results pave the way for setting up future experimental thermoelectric devices in order to achieve the highest performance.

Effects of different surface functionalization on the electronic properties and contact types of graphene/functionalized-GeC van der Waals heterostructures.

Constructing vertical heterostructures by placing graphene (Gr) on two-dimensional materials has recently emerged as an effective way to enhance the performance of nanoelectronic and optoelectronic devices. In this work, first principles calculations are employed to explore the structural and electronic properties of Gr/GeC and Gr/functionalized-GeC by H/F/Cl surface functionalization. Our results imply that the electronic properties of the Gr, GeC and all functionalized-GeC monolayers are well preserved in Gr/GeC and Gr/functionalized-GeC heterostructures, and the Gr/GeC heterostructure forms a p-type Schottky contact. Interestingly, we find that the p-type Schottky contact in Gr/GeC can be converted into the n-type one and into an n-type ohmic contact by H/F/Cl surface functionalization to form Gr/functionalized-GeC heterostructures. Furthermore, we find that electric fields and strain engineering can change both the Schottky barrier heights and the contact types of the Gr/functionalized-GeC vdWHs. These findings suggest that Gr/functionalized-GeC heterostructures can be considered as a promising candidate for designing high-performance optoelectronic and nanoelectronic devices.

Band alignment and optical features in Janus-MoSeTe/X(OH)2 (X = Ca, Mg) van der Waals heterostructures.

van der Waals heterostructures can be effectively used to enhance the electronic and optical properties and extend the application range of two-dimensional materials. Here, we construct for the first time MoSeTe/X(OH)2 (X = Ca, Mg) heterostructures and investigate their electronic and optical properties as well as the relative orientation of these layers with respect to each other and the effects of an electric field. Our results show that in the MoSeTe/X(OH)2 heterostructures, the Janus MoSeTe monolayer is bonded to the X(OH)2 layer via weak van der Waals forces. Owing to different kinds of chalcogen Se and Te atoms in both sides of Janus MoSeTe, there exist two main stacking types of the MoSeTe/X(OH)2 heterostructures, that are MoSeTe-Se/X(OH)2 and MoSeTe-Te/X(OH)2 heterostructures. Interestingly, the Se- and Te-interface can induce straddling type-II and type-I band alignments. The MoSeTe-Se/X(OH)2 heterostructure exhibits a type-II band alignment, thus endowing it with a potential ability to separate photogenerated electrons and holes. Whereas, the MoSeTe-Te/Ca(OH)2 heterostructure displays a type-I band alignment, which may result in an ultrafast recombination between electrons and holes, making the MoSeTe-Te/Ca(OH)2 heterostructure a suitable material for optoelectronic applications. The MoSeTe/X(OH)2 heterostructures show an isotropic behavior in the low energy region while an anisotropic behaviour in the high photon energy region. The dielectric function of the MoSeTe-Te/Ca(OH)2 heterostructure is high at low photon energy relative to other heterostructures verifying it to have a good optical absorption. Furthermore, the band gap values and band alignment of the MoSeTe/X(OH)2 heterostructures can be modulated by applying an electric field, which induces semiconductor-to-metal and type-I(II) to type-II(I) band alignment. These results demonstrate that the MoSeTe/X(OH)2 heterostructures are promising candidates for optoelectronic and photovoltaic nanodevices.

Interfacial Electronic Properties and Tunable Contact Types in Graphene/Janus MoGeSiN4 Heterostructures.

Two-dimensional MoSi2N4 is an emerging class of 2D MA2N4 family, which has recently been synthesized in experiment. Herein, we construct ultrathin van der Waals heterostructures between graphene and a new 2D Janus MoGeSiN4 material and investigate their interfacial electronic properties and tunable Schottky barriers and contact types using first-principles calculations. The GR/MoGeSiN4 vdWHs are expected to be energetically favorable and stable. The high carrier mobility in graphene/MoGeSiN4 vdWHs makes them suitable for high-speed nanoelectronic devices. Furthermore, depending on the stacking patterns, either an n-type or a p-type Schottky contact is formed at the GR/MoGeSiN4 interface. The strain engineering and electric field can lead to the transformation from an n-type to a p-type Schottky contact or from Schottky to Ohmic contact in graphene/MoGeSiN4 heterostructure. These findings provide useful guidance for designing controllable Schottky nanodevices based on graphene/MoGeSiN4 heterostructures with high-performance.

First-principles study of the electronic structures and optical and photocatalytic performances of van der Waals heterostructures of SiS, P and SiC monolayers.

Designing van der Waals (vdW) heterostructures of two-dimensional materials is an efficient way to realize amazing properties as well as open up opportunities for applications in solar energy conversion, nanoelectronic and optoelectronic devices. The electronic structures and optical and photocatalytic properties of SiS, P and SiC van der Waals (vdW) heterostructures are investigated by (hybrid) first-principles calculations. Both binding energy and thermal stability spectra calculations confirm the stability of these heterostructures. Similar to the corresponding parent monolayers, SiS-P (SiS-SiC) vdW heterostructures are found to be indirect type-II bandgap semiconductors. Furthermore, absorption spectra are calculated to understand the optical behavior of these systems, where the lowest energy transitions lie in the visible region. The valence and conduction band edges straddle the standard redox potentials of SiS, P and SiC vdW heterostructures, making them promising candidates for water splitting in acidic solution.

First-principles prediction of chemically functionalized InN monolayers: electronic and optical properties.

In this work, we consider the electronic and optical properties of chemically functionalized InN monolayers with F and Cl atoms (i.e., F-InN-F, F-InN-Cl, Cl-InN-F, Cl-InN-Cl monolayers) using first-principles calculations. The adsorption of the F and Cl atoms on the InN monolayer is determined to be chemically stable and the F-InN-F monolayer is most likely to occur. Our calculations show that the chemical functionalization with Cl and F atoms not only breaks the planar structure of InN monolayer but also increases its band gap. By using both Perdew, Burke, and Ernzerhof (PBE) and the Heyd-Scuseria-Ernzerhof (HSE06) hybrid functionals, all four models of chemically functionalized InN monolayers are found to be semiconductors with direct energy gaps and these gaps depend on the constituent species. When the spin-orbit coupling (SOC) was included, the energy gap of these monolayers was reduced and an energy splitting was found at the Γ-point in the valence band. Chemically functionalized InN monolayers can absorb light in a wide region, especially the F-InN-F and Cl-InN-F monolayers have a strong ability to absorb the visible light. Our findings reveal that the chemically functionalized InN monolayers have potential applications in next-generation optoelectronic devices.

Computational insights into structural, electronic and optical characteristics of GeC/C2N van der Waals heterostructures: effects of strain engineering and electric field.

Vertical heterostructures from two or more than two two-dimensional materials are recently considered as an effective tool for tuning the electronic properties of materials and for designing future high-performance nanodevices. Here, using first principles calculations, we propose a GeC/C2N van der Waals heterostructure and investigate its electronic and optical properties. We demonstrate that the intrinsic electronic properties of both GeC and C2N monolayers are quite preserved in GeC/C2N HTS owing to the weak forces. At the equilibrium configuration, GeC/C2N HTS forms the type-II band alignment with an indirect band gap of 0.42 eV, which can be considered to improve the effective separation of electrons and holes. Besides, GeC/C2N vdW-HTS exhibits strong absorption in both visible and near ultra-violet regions with an intensity of 105 cm-1. The electronic properties of GeC/C2N HTS can be tuned by applying an electric field and vertical strains. The semiconductor to metal transition can be achieved in GeC/C2N HTS in the case when the positive electric field of +0.3 V Å-1 or the tensile vertical strain of -0.9 Å is applied. These findings demonstrate that GeC/C2N HTS can be used to design future high-performance multifunctional devices.

Effects of electric field and strain engineering on the electronic properties, band alignment and enhanced optical properties of ZnO/Janus ZrSSe heterostructures.

The formation of van der Waals heterostructures (vdWHs) have recently emerged as promising structures to make a variety of novel nanoelectronic and optoelectronic devices. Here, in this work, we investigate the structural, electronic and optical features of ZnO/ZrSSe vdWHs for different stacking patterns of ZnO/SeZrS and ZnO/SZrSe by employing first-principles calculations. Binding energy and ab initio molecular dynamics calculations are also employed to confirm the structural and thermal stability of the ZnO/ZrSSe vdWHs for both models. We find that in both stacking models, the ZnO and ZrSSe layers are bonded via weak vdW forces, leading to easy exfoliation of the layers. More interestingly, both the ZnO/SeZrS and ZnO/SZrSe vdWHs posses type-II band alignment, making them promising candidates for the use of photovoltaic devices because the photogenerated electrons-holes are separated at the interface. The ZnO/ZrSSe vdWHs for both models possess high performance absorption in the visible and near-infrared regions, revealing their use for acquiring efficient photocatalysts. Moreover, the band gap values and band alignments of the ZnO/ZrSSe for both models can be adjusted by an electric field as well as vertical strains. There is a transformation from semiconductor to metal under a negative electric field and tensile vertical strain. These findings demonstrate that ZnO/ZrSSe vdWHs are a promising option for optoelectronic and nanoelectronic applications.

Spin-orbit coupling effect on electronic, optical, and thermoelectric properties of Janus Ga2SSe.

In this paper, we investigate the electronic, optical, and thermoelectric properties of Ga2SSe monolayer by using density functional theory. Via analysis of the phonon spectrum and ab initio molecular dynamics simulations, Ga2SSe is confirmed to be stable at room temperature. Our calculations demonstrate that Ga2SSe exhibits indirect semiconductor characteristics and the spin-orbit coupling (SOC) effect has slightly reduced its band gap. Besides, the band gap of Ga2SSe depends tightly on the biaxial strain. When the SOC effect is included, small spin-orbit splitting energy of 90 meV has been found in the valence band. However, the spin-orbit splitting energy dramatically changes in the presence of biaxial strain. Ga2SSe exhibits high optical absorption intensity in the near-ultraviolet region, up to 8.444 × 104 cm-1, which is needed for applications in optoelectronic devices. By using the Boltzmann transport equations, the electronic transport coefficients of Ga2SSe are comprehensively investigated. Our calculations reveal that Ga2SSe exhibits a very low lattice thermal conductivity and high figure of merit ZT and we can enhance its ZT by temperature. Our findings provide further insight into the physical properties of Ga2SSe as well as point to prospects for its application in next-generation high-performance devices.

Type-I band alignment of BX-ZnO (X = As, P) van der Waals heterostructures as high-efficiency water splitting photocatalysts: a first-principles study.

In this work, we perform first-principles calculations to examine the electronic, optical and photocatalytic properties of the BX-ZnO (X = As, P) heterostructures. The interlayer distance and binding energy of the most energetically favorable stacking configuration are 3.31 Å and -0.30 eV for the BAs-ZnO heterostructure and 3.30 Å and -0.25 eV for the BP-ZnO heterostructure. All the stacking patterns of the BX-ZnO heterostructures are proved to have thermal stability by performing AIMD simulations. The BAs-ZnO and BP-ZnO heterostructures are semiconductors with direct band gaps of 1.43 eV and 2.35 eV, respectively, and they exhibit type-I band alignment, which make them suitable for light emission applications with the ultra-fast recombination between electrons and holes. Both the BAs-ZnO and BP-ZnO heterostructures can exhibit a wider optical absorption range for visible-light owing to their reduced band gaps compared with the isolated BAs, BP and ZnO monolayers. The band alignment of both the BAs-ZnO and BP-ZnO heterostructures can straddle the water redox potential and they would have better performances owing to the direct band gap and the reduced band gap. All these findings demonstrate that the BX-ZnO heterostructures can be considered as potential photocatalysts for water splitting.

Electronic and optical properties of Janus ZrSSe by density functional theory.

In the present work, we investigate systematically the electronic and optical properties of Janus ZrSSe using first-principles calculations. Our calculations demonstrate that the Janus ZrSSe monolayer is an indirect semiconductor at equilibrium. The band gap of the Janus ZrSSe is 1.341 eV using the Heyd-Scuseria-Ernzerhof hybrid functional, larger than the band gap of ZrSe2 monolayer and smaller than that of ZrS2 monolayer. Based on the analysis of the band edge alignment, we confirm that the Janus ZrSSe monolayer possesses photocatalytic activities that can be used in water splitting applications. While strain engineering plays an important role in modulating the electronic properties and optical characteristics of the Janus ZrSSe monolayer, the influence of the external electric field on these properties is negligible. The biaxial strain, ε b, has significantly changed the band of the Janus ZrSSe monolayer, and particularly, the semiconductor-metal phase transition which occurred at ε b = 7%. The Janus ZrSSe monolayer can absorb light in both visible and ultraviolet regions. Also, the biaxial strain has shifted the first optical gap of the Janus ZrSSe monolayer. Our findings provide additional information for the prospect of applying the Janus ZrSSe monolayer in nanoelectronic devices, especially in water splitting technology.

Schottky anomaly and Néel temperature treatment of possible perturbed hydrogenated AA-stacked graphene, SiC, and h-BN bilayers.

In this paper, the potential of engineering and manipulating the electronic heat capacity and Pauli susceptibility of pristine and perturbed hydrogenated AA-stacked graphene, SiC (silicon carbide), and h-BN (hexagonal boron nitride) bilayers is studied using a designed transverse Zeeman magnetic field and the dilute charged impurity. The tight-binding Hamiltonian model, the Born approximation and the Green's function method describe the carrier dynamics up to a certain degree. The unperturbed results show that the heat capacity and susceptibility of all bilayers increase with different hydrogenation doping configurations. We also found that the maximum heat capacity and susceptibility relates to the chair-like and table-like configurations. Also, the graphene possesses the highest activity compared to SiC and h-BN lattices due to its zero on-site energies. For the Zeeman magnetic field-induced Schottky anomaly and the Néel temperature corresponding to the maximum electronic heat capacity, EHCMax., and Pauli spin paramagnetic susceptibility, PSPSMax., respectively, the pristine EHCMax. (PSPSMax.) decreases (increases) with the Zeeman field. On the other hand, the corresponding results for reduced table-like and reduced chair-like lattices illustrate that both EHCMax. and PSPSMax. decrease with the Zeeman field, on average. However, under the influence of the dilute charged impurity, the pristine EHCMax. of graphene (SiC and h-BN) decreases (increases) with impurity concentration for all configurations while the corresponding PSPSMax. fluctuates (decreases) for the pristine (reduced table-like and reduced chair-like) case. These findings introduce hydrogenated AA-stacked bilayers as versatile candidates for real applications.