Pain after combat injury in male UK military personnel deployed to Afghanistan.

BACKGROUND: Chronic pain after injury poses a serious health burden. As a result of advances in medical technology, ever more military personnel survive severe combat injuries, but long-term pain outcomes are unknown. We aimed to assess rates of pain in a representative sample of UK military personnel with and without combat injuries. METHODS: We used data from the ADVANCE cohort study (ISRCTN57285353). Individuals deployed as UK armed forces to Afghanistan were recruited to include those with physical combat injuries, and a frequency-matched uninjured comparison group. Participants completed self-reported questionnaires, including 'overall' pain intensity and self-assessment of post-traumatic stress disorder, anxiety, and depression. RESULTS: A total of 579 participants with combat injury, including 161 with amputations, and 565 uninjured participants were included in the analysis (median 8 yr since injury/deployment). Frequency of moderate or severe pain was 18% (n=202), and was higher in the injured group (n=140, 24%) compared with the uninjured group (n=62, 11%, relative risk: 1.1, 95% confidence interval [CI]: 1.0-1.2, P<0.001), and lower in the amputation injury subgroup (n=31, 19%) compared with the non-amputation injury subgroup (n=109, 26%, relative risk: 0.9, 95% CI: 0.9-1.0, P=0.034). Presence of at least moderate pain was associated with higher rates of post-traumatic stress (RR: 3.7, 95% CI: 2.7-5.0), anxiety (RR: 3.2, 95% CI: 2.4-4.3), and depression (RR: 3.4, 95% CI: 2.7-4.5) after accounting for injury. CONCLUSION: Combat injury, but not amputation, was associated with a higher frequency of moderate to severe pain intensity in this cohort, and pain was associated with adverse mental health outcomes.

Validity of Ultra-Short-Term Heart Rate Variability Derived from Femoral Arterial Pulse Waveform in a British Military Cohort.

Various non-electrocardiogram (ECG) based methods are considered reliable sources of heart rate variability (HRV) measurement. However, the ultra-short recording of a femoral arterial waveform has never been validated against the gold-standard ECG-based 300s HRV and was the aim of this study.A validity study was conducted using a sample from the first follow-up of the longitudinal ADVANCE study UK. The participants were adult servicemen (n = 100); similar in age, rank, and deployment period (Afghanistan 2003-2014). The femoral arterial waveforms (14s) from the pulse wave velocity (PWV) assessment, and ECG (300s) were recorded at rest in the supine position using the Vicorder™ and Bittium Faros™ devices, respectively, in the same session. HRV analysis was performed using Kubios Premium. Resting heart rate (HR) and root mean square of successive differences (RMSSD) were reported. The Bland-Altman %plots were constructed to explore the PWV-ECG agreement in HRV measurement. A further exploratory analysis was conducted across methods and durations.The participants' mean age was 38.0 ± 5.3 years. Both PWV-derived HR (r = 0.85) and RMSSD (rs=0.84) showed strong correlations with their 300s-ECG counterparts (p < 0.001). Mean HR was significantly higher with ECG than PWV (mean bias: -12.71 ± 7.73%, 95%CI: -14.25%, -11.18%). In contrast, the difference in RMSSD between the two methods was non-significant [mean bias: -2.90 ± 37.82% (95%CI: -10.40%, 4.60%)] indicating good agreement. An exploratory analysis of 14s ECG-vs-300s ECG measurement revealed strong agreement in both RMSSD and HR.The 14s PWV-derived RMSSD strongly agrees with the gold-standard (300s-ECG-based) RMSSD at rest. Conversely, HR appears method sensitive.

Post-traumatic growth amongst UK armed forces personnel who were deployed to Afghanistan and the role of combat injury, mental health and pain: the ADVANCE cohort study.

BACKGROUND: Post-traumatic growth (PTG) is a positive psychological consequence of trauma. The aims of this study were to investigate whether combat injury was associated with deployment-related PTG in a cohort of UK military personnel who were deployed to Afghanistan, and whether post-traumatic stress disorder (PTSD), depression and pain mediate this relationship. METHODS: 521 physically injured (n = 138 amputation; n = 383 non-amputation injury) and 514 frequency-matched uninjured personnel completed questionnaires including the deployment-related Post-Traumatic Growth Inventory (DPTGI). DPTGI scores were categorised into tertiles of: no/low (score 0-20), moderate (score 21-34) or a large (35-63) degree of deployment-related PTG. Analysis was completed using generalised structural equation modelling. RESULTS: A large degree of PTG was reported by 28.0% (n = 140) of the uninjured group, 36.9% (n = 196) of the overall injured group, 45.4% (n = 62) of amputee and 34.1% (n = 134) of the non-amputee injured subgroups. Combat injury had a direct effect on reporting a large degree of PTG [Relative risk ratio (RRR) 1.59 (95% confidence interval (CI) 1.17-2.17)] compared to sustaining no injury. Amputation injuries also had a significant direct effect [RRR 2.18 (95% CI 1.24-3.75)], but non-amputation injuries did not [RRR 1.35 (95% CI 0.92-1.93)]. PTSD, depression and pain partially mediate this relationship, though mediation differed depending on the injury subtype. PTSD had a curvilinear relationship with PTG, whilst depression had a negative association and pain had a positive association. CONCLUSIONS: Combat injury, in particular injury resulting in traumatic amputation, is associated with reporting a large degree of PTG.

Relationship between combat-related traumatic injury and its severity to predicted cardiovascular disease risk: ADVANCE cohort study.

BACKGROUND: This study investigated the relationship between combat-related traumatic injury (CRTI) and its severity and predicted cardiovascular disease (CVD) risk. MATERIAL AND METHODS: This was an analysis of comparative 10-year predicted CVD risk (myocardial infarction, stroke or CVD-death) using the QRISK®3 scoring-system among adults recruited into the Armed Services Trauma Rehabilitation Outcome (ADVANCE) cohort study. Participants with CRTI were compared to uninjured servicemen frequency-matched by age, sex, rank, deployment (Afghanistan 2003-2014) and role. Injury severity was quantified using the New Injury Severity Score (NISS). RESULTS: One thousand one hundred forty four adult combat veterans were recruited, consisting of 579 injured (161 amputees) and 565 uninjured men of similar age ethnicity and time from deployment/injury. Significant mental illness (8.5% vs 4.4%; p = 0.006) and erectile dysfunction (11.6% vs 5.8%; p < 0.001) was more common, body mass index (28.1 ± 3.9 vs 27.4 ± 3.4 kg/m2; p = 0.001) higher and systolic blood pressure variability (median [IQR]) (1.7 [1.2-3.0] vs 2.1 [1.2-3.5] mmHg; p = 0.008) lower among the injured versus uninjured respectively. The relative risk (RR) of predicted CVD (versus the population expected risk) was higher (RR:1.67 [IQR 1.16-2.48]) among the injured amputees versus the injured non-amputees (RR:1.60 [1.13-2.43]) and uninjured groups (RR:1.52 [1.12-2.34]; overall p = 0.015). After adjustment for confounders CRTI, worsening injury severity (higher NISS, blast and traumatic amputation) were independently associated with QRISK®3 scores. CONCLUSION: CRTI and its worsening severity were independently associated with increased predicted 10-year CVD risk.

3D shape reconstruction of the femur from planar X-ray images using statistical shape and appearance models.

Major trauma is a condition that can result in severe bone damage. Customised orthopaedic reconstruction allows for limb salvage surgery and helps to restore joint alignment. For the best possible outcome three dimensional (3D) medical imaging is necessary, but its availability and access, especially in developing countries, can be challenging. In this study, 3D bone shapes of the femur reconstructed from planar radiographs representing bone defects were evaluated for use in orthopaedic surgery. Statistical shape and appearance models generated from 40 cadaveric X-ray computed tomography (CT) images were used to reconstruct 3D bone shapes. The reconstruction simulated bone defects of between 0% and 50% of the whole bone, and the prediction accuracy using anterior-posterior (AP) and anterior-posterior/medial-lateral (AP/ML) X-rays were compared. As error metrics for the comparison, measures evaluating the distance between contour lines of the projections as well as a measure comparing similarities in image intensities were used. The results were evaluated using the root-mean-square distance for surface error as well as differences in commonly used anatomical measures, including bow, femoral neck, diaphyseal-condylar and version angles between reconstructed surfaces from the shape model and the intact shape reconstructed from the CT image. The reconstructions had average surface errors between 1.59 and 3.59 mm with reconstructions using the contour error metric from the AP/ML directions being the most accurate. Predictions of bow and femoral neck angles were well below the clinical threshold accuracy of 3°, diaphyseal-condylar angles were around the threshold of 3° and only version angle predictions of between 5.3° and 9.3° were above the clinical threshold, but below the range reported in clinical practice using computer navigation (i.e., 17° internal to 15° external rotation). This study shows that the reconstructions from partly available planar images using statistical shape and appearance models had an accuracy which would support their potential use in orthopaedic reconstruction.

Hip joint and muscle loading for persons with bilateral transfemoral/through-knee amputations: biomechanical differences between full-length articulated and foreshortened non-articulated prostheses.

BACKGROUND: Currently, there is little available in-depth analysis of the biomechanical effect of different prostheses on the musculoskeletal system function and residual limb internal loading for persons with bilateral transfemoral/through-knee amputations (BTF). Commercially available prostheses for BTF include full-length articulated prostheses (microprocessor-controlled prosthetic knees with dynamic response prosthetic feet) and foreshortened non-articulated stubby prostheses. This study aims to assess and compare the BTF musculoskeletal function and loading during gait with these two types of prostheses. METHODS: Gait data were collected from four male traumatic military BTF and four able-bodied (AB) matched controls using a 10-camera motion capture system with two force plates. BTF completed level-ground walking trials with full-length articulated and foreshortened non-articulated stubby prostheses. Inverse kinematics, inverse dynamics and musculoskeletal modelling simulations were conducted. RESULTS: Full-length articulated prostheses introduced larger stride length (by 0.5 m) and walking speed (by 0.3 m/s) than stubbies. BTF with articulated prostheses showed larger peak hip extension angles (by 10.1°), flexion moment (by 1.0 Nm/kg) and second peak hip contact force (by 3.8 bodyweight) than stubbies. There was no difference in the hip joint loading profile between BTF with stubbies and AB for one gait cycle. Full-length articulated prostheses introduced higher hip flexor muscle force impulse than stubbies. CONCLUSIONS: Compared to stubbies, BTF with full-length articulated prostheses can achieve similar activity levels to persons without limb loss, but this may introduce detrimental muscle and hip joint loading, which may lead to reduced muscular endurance and joint degeneration. This study provides beneficial guidance in making informed decisions for prosthesis choice.

Clinical trial of a low-cost external fixator for global surgery use.

PURPOSE: A low-cost modular external fixator for the lower limb has been developed for global surgery use. The purpose of this study is to assess outcome measures in the first clinical use of the device. METHODS: A prospective cohort study was conducted with patients recruited in two trauma hospitals. Initial clinical procedure data were collected, and patients were followed up every two weeks until 12 weeks or definitive fixation. Follow-up assessed infection, stability, and radiographic outcomes. In addition, patient-reported outcomes and surgeons' feedback on device usability were collected by questionnaires. RESULTS: The external fixator was used on 17 patients. Ten were mono-lateral, five were joint spanning, and two were delta configuration. One patient had a pin site infection at 12-week follow-up. All were stable when tested mechanically and using radiographic assessment, and 53% were converted to definitive fixation. CONCLUSION: The low-cost external fixator developed is appropriate for use in global surgery trauma centres with good clinical outcomes. PROSPECTIVE TRIAL REGISTRATION NUMBER AND DATE: SLCTR/2021/025 (06 Sep 2021).

Injury scoring systems for blast injuries: a narrative review.

Injury scoring systems can be used for triaging, predicting morbidity and mortality, and prognosis in mass casualty incidents. Recent conflicts and civilian incidents have highlighted the unique nature of blast injuries, exposing deficiencies in current scoring systems. Here, we classify and describe deficiencies with current systems used for blast injury. Although current scoring systems highlight survival trends for populations, there are several major limitations. The reliable prediction of mortality on an individual basis is inaccurate. Other limitations include the saturation effect (where scoring systems are unable to discriminate between high injury score individuals), the effect of the overall injury burden, lack of precision in discriminating between mechanisms of injury, and a lack of data underpinning scoring system coefficients. Other factors influence outcomes, including the level of healthcare and the delay between injury and presentation. We recommend that a new score incorporates the severity of injuries with the mechanism of blast injury. This may include refined or additional codes, severity scores, or both, being added to the Abbreviated Injury Scale for high-frequency, blast-specific injuries; weighting for body regions associated with a higher risk for death; and blast-specific trauma coefficients. Finally, the saturation effect (maximum value) should be removed, which would enable the classification of more severe constellations of injury. An early accurate assessment of blast injury may improve management of mass casualty incidents.

Novel Assessment of Isometric Hip Extensor Function: Reliability, Joint Angle Sensitivity, and Concurrent Validity.

ABSTRACT: Goodwin, JE and Bull, AMJ. Novel assessment of isometric hip extensor function: reliability, joint angle sensitivity, and concurrent validity. J Strength Cond Res 36(10): 2762-2770, 2022-Closed-chain hip extension function has not been well examined. The aim of this study was to examine the reliability, joint angle sensitivity, muscle recruitment, and concurrent validity of a force plate-based isometric hip extensor test (isometric hip thrust). All subjects were active men aged 19-29 years. In part 1, bilateral and unilateral hip extensor testing was completed on 4 occasions by 14 subjects to evaluate repeatability of force and torque measures. In part 2, joint angle sensitivity of force, torque, and surface electromyography was assessed by 10 subjects completing testing at 4 hip joint angles in a single test session. In part 3, concurrent validity of joint torque was assessed relative to standing and supine test positions on an isokinetic dynamometer, by 10 subjects in a single test session. The repeatability study found small changes in the mean from sessions 1-2 (mean standardized change d = 0.31) and close to no change in later sessions (mean d = 0.12). Typical error was predominantly low to moderate (mean 0.42), and intraclass correlation coefficient (ICC) was typically high (mean ICC = 0.87). The joint angle sensitivity study showed that increasing the hip flexion resulted in increases in peak extension force ( p = 0.001) and gluteus maximus activation ( p = 0.003) and a reduction in biceps femoris activation ( p < 0.001). There was no change in torque ( p = 0.585) and vastus lateralis activation ( p = 0.482). The concurrent validity study found that torque was correlated with supine dynamometry ( R2 = 0.555) but not with standing dynamometry ( R2 = 0.193). In summary, the isometric hip thrust is repeatable, but benefits from familiarization. Force output and muscle recruitment are sensitive to joint position, providing an opportunity to assess different functional output.

Maximum dorsiflexion increases Achilles tendon force during exercise for midportion Achilles tendinopathy.

Rehabilitation is an important treatment for non-insertional Achilles tendinopathy. To date, eccentric loading exercises (ECC) have been the predominant choice; however, mechanical evidence underlying their use remains unclear. Other protocols, such as heavy slow resistance loading (HSR), have shown comparable outcomes, but with less training time. This study aims to identify the effect of external loading and other variables that influence Achilles tendon (AT) force in ECC and HSR. Ground reaction force and kinematic data during ECC and HSR were collected from 18 healthy participants for four loading conditions. The moment arms of the AT were estimated from MRIs of each participant. AT force then was calculated using the ankle torque obtained from inverse dynamics. In the eccentric phase, the AT force was not larger than in the concentric phase in both ECC and HSR. Under the same external load, the force through the AT was larger in ECC with the knee bent than in HSR with the knee straight due to increased dorsiflexion angle of the ankle. Multivariate regression analysis showed that external load and maximum dorsiflexion angle were significant predictors of peak AT force in both standing and seated positions. Therefore, to increase the effectiveness of loading the AT, exercises should apply adequate external load and reach maximum dorsiflexion during the movement. Peak dorsiflexion angle affected the AT force in a standing position at twice the rate of a seated position, suggesting standing could prove more effective for the same external loading and peak dorsiflexion angle.

Cyamella (a popliteal sesamoid bone) prevalence: A systematic review, meta-analysis, and proposed classification system.

The cyamella is a rare, generally asymptomatic, knee sesamoid bone located in the proximal tendon of the popliteal muscle. Only two studies have investigated cyamella presence/absence in humans, putting ossified prevalence rates at 0.57%-1.8%. We aim to (a) determine cyamella prevalence in a Korean population, (b) examine coincident development of the cyamella and fabella, and (c) perform a systematic review and meta-analysis on the cyamella in humans. Medical computed tomography scans of 106 individuals were reviewed. A systematic review and meta-analysis were performed following PRISMA guidelines. Cyamellae were found in 3/212 knees (1.4%), and presence/absence was uncorrelated to height, age, and sex. The cyamella was not found coincidentally with the fabella, although the statistical power was low. Our systematic review/meta-analysis revealed cyamellae were generally asymptomatic and ossification could occur at 14 years. Cyamellae were equally likely to be found in both sexes, knees, one or both knees, and there appeared to be no global variation in prevalence rates. Cyamellae were found in three distinct locations. There is little support for the role of intrinsic genetic and/or environmental factors in cyamella development in humans. However, the apparent phylogenetic signal in Primates suggests genetics plays a role in cyamella development. We propose a cyamella classification system based on cyamella location (Class I, popliteal sulcus; Class II, tibial condyle; Class III, fibular head) and hypothesize locations may correspond to distinct developmental pathways, and cyamella function may vary with location.

Human biological variation in sesamoid bone prevalence: the curious case of the fabella.

The fabella is a sesamoid bone located in the gastrocnemius behind the lateral femoral condyle. In humans, fabellae are 3.5 times more common today than they were 100 years ago, with prevalence rates varying between and within populations. In particular, fabellae have been assumed to be more common in Asians than non-Asians, equally common in men and women, potentially more common in older individuals, and bilateral cases (one per knee) appear to be more common than unilateral ones. The roles of genetic and environmental factors in this phenotypic variation have been hypothesized, but not rigorously investigated. Given its clinical and evolutionary significance (i.e. being associated with several knee ailments, causing medical issues on its own, interfering with medical devices, and being less common in humans than in other mammals), it is important comprehensively to understand prevalence rate variation, and the roles of genetics and environmental factors in that variation. To address these questions, we performed a meta-analysis on data from studies published from 1875 to 2018 to investigate possible variation in sexual dimorphic (n = 22 studies, 7911 knees), ontogenetic (n = 10 studies, 4391 knees), and global (n = 65 studies, 21 626 knees) fabella prevalence rates. In addition, we investigated what proportion of cases are bilateral (n = 37 studies, 900 individuals), and among unilateral cases (n = 20 studies, 204 individuals), if fabellae are more common in the left or right knee. Our results show that, today, fabellae are 2.47-2.60% more common in men than women, and prevalence rates increase ontogenetically in old age (i.e. 70 years old), implying that fabellae can ossify early (i.e. 12 years old) or late in life. Approximately 72.94% of cases are bilateral, and among unilateral ones, fabellae are equally common in right and left knees. There is marked regional variation in fabella prevalence rates, with rates being highest in Asia, followed by Oceania, South America, Europe, Middle East, and North America, and lowest in Africa. Worldwide, an average of 36.80% of knees has ossified fabellae detectable by dissection. These results imply that, while the ability to form a fabella may be genetically controlled, the mechanisms that trigger fabella ossification may be environmentally controlled. What these environmental factors are, can only be speculated.

Avoiding high-risk rotator cuff loading: Muscle force during three pull-up techniques.

Heavily loaded overhead training tasks, such as pull-ups are an effective strength training and rehabilitation exercise requiring high muscle forces maintained over a large range of motion. This study used experiments and computational modeling to examine loading patterns during three different pull-up variants and highlighted risks to vulnerable musculoskeletal structures. Optical motion tracking and a force platform captured kinematics and kinetics of 11 male subjects with no history of shoulder pathology, during performance of three pull-up variants-pronated front grip, pronated wide grip, and supinated reverse grip. UK National Shoulder model (UKNSM) simulated biomechanics of the shoulder girdle. Muscle forces and activation patterns were analyzed by repeated measures ANOVA with post-hoc comparisons. Motor group recruitment was similar across all pull-up techniques, with upper limb depression occurring secondary to torso elevation. Stress-time profiles show significant differences in individual muscle patterns among the three pull-up variants, with the most marked differences between wide grip and reverse grip. Comparing across techniques, latissimus dorsi was relatively more active in wide pull-ups (P < .01); front pull-ups favored activation of biceps brachii and brachialis (P < .02); reverse pull-ups displayed higher proportional rotator cuff activation (P < .01). Pull-ups promote stability of the shoulder girdle and activation of scapula stabilizers and performing pull-ups over their full range of motion is important as different techniques and phases emphasize different muscles. Shoulder rehabilitation and strength & conditioning programs should encourage incorporation of all three pull-up variants with systematic progression to provide greater global strengthening of the torso and upper limb musculature.

A Femoral Clamp to Reduce Soft Tissue Artifact: Accuracy and Reliability in Measuring Three-Dimensional Knee Kinematics During Gait.

The accurate measurement of full six degrees-of-freedom (6DOFs) knee joint kinematics is prohibited by soft tissue artifact (STA), which remains the greatest source of error. The purpose of this study was to present and assess a new femoral clamp to reduce STA at the thigh. It was hypothesized that the device can preserve the natural knee joint kinematics pattern and outperform a conventional marker mounted rigid cluster during gait. Six healthy subjects were asked to walk barefoot on level ground with a cluster marker set (cluster gait) followed by a cluster-clamp-merged marker set (clamp gait) and their kinematics was measured using the cluster method in cluster gait and the cluster and clamp methods simultaneously in clamp gait. Two operators performed the gait measurement. A 6DOFs knee joint model was developed to enable comparison with the gold standard knee joint kinematics measured using a dual fluoroscopic imaging technique. One-dimensional (1D) paired t-tests were used to compare the knee joint kinematics waveforms between cluster gait and clamp gait. The accuracy was assessed in terms of the root-mean-square error (RMSE), coefficient of determination, and Bland-Altman plots. Interoperator reliability was assessed using the intraclass correlation coefficient (ICC). The result showed that the femoral clamp did not change the walking speed and knee joint kinematics waveforms. Additionally, clamp gait reduced the rotation and translation errors in the transverse plane and improved the interoperator reliability when compared to the rigid cluster method, suggesting a more accurate and reliable measurement of knee joint kinematics.

A biomechanical confirmation of the relationship between critical shoulder angle (CSA) and articular joint loading.

BACKGROUND: The critical shoulder angle (CSA) has been shown to be correlated with shoulder disease states. The biomechanical hypothesis to explain this correlation is that the CSA changes the shear and compressive forces on the shoulder. The objective of this study is to test this hypothesis by use of a validated computational shoulder model. Specifically, this study assesses the impact on glenohumeral biomechanics of modifying the CSA. METHODS: An inverse dynamics 3-dimensional musculoskeletal model of the shoulder was used to quantify muscle forces and glenohumeral joint forces. The CSA was changed by altering the attachment point of the middle deltoid into a normal CSA (33°), a reduced CSA of 28°, and an increased CSA of 38°. Subject-specific kinematics of slow and fast speed abduction in the scapular plane and slow and fast forward flexion measured by a 3-dimensional motion capture system were used to quantify joint reaction shear and compressive forces. RESULTS: Increasing the CSA results in increased superior-inferior forces (shearing forces; integrated over the range of motion; P < .05). Reducing CSA results in increased lateromedial (compressive) forces for both the maximum and integrated sum of the forces over the whole motion (P < .01). DISCUSSION/CONCLUSION: Changes in the CSA modify glenohumeral joint biomechanics with increasing CSA producing higher shear forces that could contribute to rotator cuff overuse, whereas reducing the CSA results in higher compressive forces that contribute to joint wear.

Fabella prevalence rate increases over 150 years, and rates of other sesamoid bones remain constant: a systematic review.

The fabella is a sesamoid bone located behind the lateral femoral condyle. It is common in non-human mammals, but the prevalence rates in humans vary from 3 to 87%. Here, we calculate the prevalence of the fabella in a Korean population and investigate possible temporal shifts in prevalence rate. A total of 52.83% of our individuals and 44.34% of our knees had fabellae detectable by computed tomography scanning. Men and women were equally likely to have a fabella, and bilateral cases (67.86%) were more common than unilateral ones (32.14%). Fabella presence was not correlated with height or age, although our sample did not include skeletally immature individuals. Our systematic review yielded 58 studies on fabella prevalence rate from 1875-2018 which met our inclusion criteria, one of which was an outlier. Intriguingly, a Bayesian mixed effects generalized linear model revealed a temporal shift in prevalence rates, with the median prevalence rate in 2000 (31.00%) being ~ 3.5 times higher than that in 1900 (7.64%). In all four countries with studies before and after 1960, higher rates were always found after 1960. Using data from two other systematic reviews, we found no increase in prevalence rates of 10 other sesamoid bones in the human body, indicating that the increase in fabella prevalence rate is unique. Fabella presence/absence is due to a combination of genetic and environmental factors: as the prevalence rates of other sesamoid bones have not changed in the last 100 years, we postulate the increase in fabella prevalence rate is due to an environmental factor. Namely, the global increase in human height and weight (due to improved nutrition) may have increased human tibial length and muscle mass. Increases in tibial length could lead to a larger moment arm acting on the knee and on the tendons crossing it. Coupled with the increased force from a larger gastrocnemius, this could produce the mechanical stimuli necessary to initiate fabella formation and/or ossification.

Predicting meniscal tear stability across knee-joint flexion using finite-element analysis.

PURPOSE: To analyse the stress distribution through longitudinal and radial meniscal tears in three tear locations in weight-bearing conditions and use it to ascertain the impact of tear location and type on the potential for healing of meniscal tears. METHODS: Subject-specific finite-element models of a healthy knee under static loading at 0°, 20°, and 30° knee flexion were developed from unloaded magnetic resonance images and weight-bearing, contrast-enhanced computed tomography images. Simulations were then run after introducing tears into the anterior, posterior, and midsections of the menisci. RESULTS: Absolute differences between the displacements of anterior and posterior segments modelled in the intact state and those quantified from in vivo weight-bearing images were less than 0.5 mm. There were tear-location-dependent differences between hoop stress distributions along the inner and outer surfaces of longitudinal tears; the longitudinal tear surfaces were compressed together to the greatest degree in the lateral meniscus and were most consistently in compression on the midsections of both menisci. Radial tears resulted in an increase in stress at the tear apex and in a consistent small compression of the tear surfaces throughout the flexion range when in the posterior segment of the lateral meniscus. CONCLUSIONS: Both the type of meniscal tear and its location within the meniscus influenced the stresses on the tear surfaces under weight bearing. Results agree with clinical observations and suggest reasons for the inverse correlation between longitudinal tear length and healing, the inferior healing ability of medial compared with lateral menisci, and the superior healing ability of radial tears in the posterior segment of the lateral meniscus compared with other radial tears. This study has shown that meniscal tear location in addition to type likely plays a crucial role in dictating the success of non-operative treatment of the menisci. This may be used in decision making regarding conservative or surgical management.

In Vivo Knee Contact Force Prediction Using Patient-Specific Musculoskeletal Geometry in a Segment-Based Computational Model.

Segment-based musculoskeletal models allow the prediction of muscle, ligament, and joint forces without making assumptions regarding joint degrees-of-freedom (DOF). The dataset published for the "Grand Challenge Competition to Predict in vivo Knee Loads" provides directly measured tibiofemoral contact forces for activities of daily living (ADL). For the Sixth Grand Challenge Competition to Predict in vivo Knee Loads, blinded results for "smooth" and "bouncy" gait trials were predicted using a customized patient-specific musculoskeletal model. For an unblinded comparison, the following modifications were made to improve the predictions: further customizations, including modifications to the knee center of rotation; reductions to the maximum allowable muscle forces to represent known loss of strength in knee arthroplasty patients; and a kinematic constraint to the hip joint to address the sensitivity of the segment-based approach to motion tracking artifact. For validation, the improved model was applied to normal gait, squat, and sit-to-stand for three subjects. Comparisons of the predictions with measured contact forces showed that segment-based musculoskeletal models using patient-specific input data can estimate tibiofemoral contact forces with root mean square errors (RMSEs) of 0.48-0.65 times body weight (BW) for normal gait trials. Comparisons between measured and predicted tibiofemoral contact forces yielded an average coefficient of determination of 0.81 and RMSEs of 0.46-1.01 times BW for squatting and 0.70-0.99 times BW for sit-to-stand tasks. This is comparable to the best validations in the literature using alternative models.

Incremental training intensities increases loads on the lower back of elite female rowers.

Lumbar-pelvic kinematics change in response to increasing rowing stroke rates, but little is known about the effect of incremental stroke rates on changes in joint kinetics and their implications for injury. The purpose of this study was to quantify the effects of incremental rowing intensities on lower limb and lumbar-pelvic kinetics. Twelve female rowers performed an incremental test on a rowing ergometer. Kinematic data of rowers' ankle, knee, hip and lumbar-pelvic joints, as well as external forces at the handle, seat and foot-stretchers of the rowing machine were recorded. Inter-segmental moments and forces were calculated using inverse dynamics and were compared across stroke rates using repeated measures ANOVA. Rowers exhibited increases in peak ankle and L5/S1 extensor moments, reductions in peak knee moments and no change in peak hip moments, with respect to stroke rate. Large shear and compressive forces were seen at L5/S1 and increased with stroke rate (P < 0.05). This coincided with increased levels of lumbar-pelvic flexion. High levels of lumbar-pelvic loading at higher stroke rates have implications with respect to injury and indicated that technique was declining, leading to increased lumbar-pelvic flexion. Such changes are not advantageous to performance and can potentially increase the risk of developing injuries.