When is an Imine Directing Group a Transient Imine Directing Group in C-H Functionalization?

'Transient' C-H functionalization has emerged in recent years to describe the use of a dynamic linkage, often an imine, to direct cyclometallation and subsequent functionalization. As the field continues to grow in popularity, we consider the features that make an imine directing group transient. A transient imine should be i) formed dynamically in situ, ii) avoid discrete introduction or cleavage steps, and iii) offer the potential for catalysis in both the directing group and metal. This concept article contrasts transient imines with pioneering early studies of imines as directing groups for the formation of metallacycles and the use of preformed imines in C-H functionalization. Leading developments in the use of catalytic additives to form transient directing groups (as aldehyde or amine) are covered including selected highlights of the most recent examples of catalytic imine directed C-H functionalization with transition metals.

Visible Light Photoredox-Catalyzed Decarboxylative Alkylation of 3-Aryl-Oxetanes and Azetidines via Benzylic Tertiary Radicals and Implications of Benzylic Radical Stability.

Four-membered heterocycles offer exciting potential as small polar motifs in medicinal chemistry but require further methods for incorporation. Photoredox catalysis is a powerful method for the mild generation of alkyl radicals for C-C bond formation. The effect of ring strain on radical reactivity is not well understood, with no studies that address this question systematically. Examples of reactions that involve benzylic radicals are rare, and their reactivity is challenging to harness. This work develops a radical functionalization of benzylic oxetanes and azetidines using visible light photoredox catalysis to prepare 3-aryl-3-alkyl substituted derivatives and assesses the influence of ring strain and heterosubstitution on the reactivity of small-ring radicals. 3-Aryl-3-carboxylic acid oxetanes and azetidines are suitable precursors to tertiary benzylic oxetane/azetidine radicals which undergo conjugate addition into activated alkenes. We compare the reactivity of oxetane radicals to other benzylic systems. Computational studies indicate that Giese additions of unstrained benzylic radicals into acrylates are reversible and result in low yields and radical dimerization. Benzylic radicals as part of a strained ring, however, are less stable and more π-delocalized, decreasing dimer and increasing Giese product formation. Oxetanes show high product yields due to ring strain and Bent's rule rendering the Giese addition irreversible.

Synthesis of oxetane and azetidine ethers as ester isosteres by Brønsted acid catalysed alkylation of alcohols with 3-aryl-oxetanols and 3-aryl-azetidinols.

Oxetanes and azetidines continue to draw significant interest in medicinal chemistry, as small, polar and non-planar motifs. Oxetanes also represent interesting surrogates for carbonyl-containing functional groups. Here we report a synthesis of 3,3-disubstituted oxetane- and azetidine-ethers, with comparisons made to the ester functional group. The tertiary benzylic alcohols of the 4-membered rings are selectively activated using Brønsted acid catalysis and reacted with simple alcohols to form the ethers and maintain the oxetane ring intact. This approach avoids the use of strong bases and halide alkylating agents and allows alcohol libraries to be leveraged. Oxetane ethers demonstrate excellent chemical stability across a range of conditions and an improved stability vis-à-vis analogous esters under basic and reducing conditions.

Synthesis of Sulfoximines and Sulfonimidamides Using Hypervalent Iodine Mediated NH Transfer.

The development of NH transfer reactions using hypervalent iodine and simple sources of ammonia has facilitated the synthesis of sulfoximines and sulfonimidamides for applications across the chemical sciences. Perhaps most notably, the methods have been widely applied in medicinal chemistry and in the preparation of biologically active compounds, including in the large-scale preparation of an API intermediate. This review provides an overview of the development of these synthetic methods involving an intermediate iodonitrene since our initial report in 2016 on the conversion of sulfoxides into sulfoximines. This review covers the NH transfer to sulfoxides and sulfinamides, and the simultaneous NH/O transfer to sulfides and sulfenamides to form sulfoximines and sulfonimidamides, respectively. The mechanism of the reactions and the identification of key intermediates are discussed. Developments in the choice of reagents, and in the reaction conditions and setups used are described.

4-Membered Ring Carbocations: A Positive Development in the Synthesis of 3,3-Disubstituted Oxetanes and Azetidines.

4-Membered heterocycles are low molecular weight polar scaffolds with intriguing potential for drug discovery. Despite their unquestionable value, methods to access such heterocycles remain scant. Here, we describe the generation of oxetane- and azetidine- benzylic carbocations as a general strategy to access valuable 3,3-disubstituted derivatives.

Synthesis of Sulfoximine Propargyl Carbamates under Improved Conditions for Rhodium Catalyzed Carbamate Transfer to Sulfoxides.

Sulfoximines provide aza-analogues of sulfones, with potentially improved properties for medicinal chemistry. The sulfoximine nitrogen also provides an additional vector for the inclusion of other functionality. Here, we report improved conditions for rhodium catalyzed synthesis of sulfoximine (and sulfilimine) carbamates, especially for previously low-yielding carbamates containing π-functionality. Notably we report the preparation of propargyl sulfoximine carbamates to provide an alkyne as a potential click handle. Using Rh2(esp)2 as catalyst and a DOE optimization approach provided considerably increased yields.

Amine-Catalyzed Copper-Mediated C-H Sulfonylation of Benzaldehydes via a Transient Imine Directing Group.

Transient directing groups (TDGs) can provide a powerful means for C-H functionalization without requiring additional steps for directing group introduction and removal. We report the first use of a TDG in combination with copper to effect C-H functionalization. The regioselective copper mediated ß-C(sp2 )-H sulfonylation of aldehydes with sulfinate salts is accomplished using catalytic ß-alanine to form a transient imine. A broad range of sulfonylated benzaldehydes are prepared using copper fluoride as both copper source and oxidant, involving a [5,6] cupracyclic intermediate. γ-(peri)-Sulfonylation of napthyl and phenanthrenyl carboxaldehydes is achieved through [6,6] cupracyclic intermediates. Further derivatisation of the aldehyde products is demonstrated. Kinetic experiments and Hammett analysis suggest the turnover limiting step to be a concerted asynchronous C-H cleavage via a dearomative Wheland-type transition state.

Synthesis and Transformations of NH-Sulfoximines.

Recent years have seen a marked increase in the occurrence of sulfoximines in the chemical sciences, often presented as valuable motifs for medicinal chemistry. This has been prompted by both pioneering works taking sulfoximine containing compounds into clinical trials and the concurrent development of powerful synthetic methods. This review covers recent developments in the synthesis of sulfoximines concentrating on developments since 2015. This includes extensive developments in both S-N and S-C bond formations. Flow chemistry processes for sulfoximine synthesis are also covered. Finally, subsequent transformations of sulfoximines, particularly in N-functionalization are reviewed, including N-S, N-P, N-C bond forming processes and cyclization reactions.

Synthesis and Configurational Assignment of Vinyl Sulfoximines and Sulfonimidamides.

Vinyl sulfones and sulfonamides are valued for their use as electrophilic warheads in covalent protein inhibitors. Conversely, the S(VI) aza-isosteres thereof, vinyl sulfoximines and sulfonimidamides, are far less studied and have yet to be applied to the field of protein bioconjugation. Herein, we report a range of different synthetic methodologies for constructing vinyl sulfoximine and vinyl sulfonimidamide architectures that allows access to new areas of electrophilic chemical space. We demonstrate how late-stage functionalization can be applied to these motifs to incorporate alkyne tags, generating fully functionalized probes for future chemical biology applications. Finally, we establish a workflow for determining the absolute configuration of enantioenriched vinyl sulfoximines and sulfonimidamides by comparing experimentally and computationally determined electronic circular dichroism spectra, enabling access to configurationally assigned enantiomeric pairs by separation.

Synthesis of Highly Enantioenriched Sulfonimidoyl Fluorides and Sulfonimidamides by Stereospecific Sulfur-Fluorine Exchange (SuFEx) Reaction.

Sulfonimidamides present exciting opportunities as chiral isosteres of sulfonamides, with potential for additional directional interactions. Here, we present the first modular enantioselective synthesis of sulfonimidamides, including the first stereoselective synthesis of enantioenriched sulfonimidoyl fluorides, and studies on their reactivity. A new route to sulfonimidoyl fluorides is presented from solid bench-stable, N-Boc-sulfinamide (Boc=tert-butyloxycarbonyl) salt building blocks. Enantioenriched arylsulfonimidoyl fluorides are shown to be readily racemised by fluoride ions. Conditions are developed, which trap fluoride and enable the stereospecific reaction of sulfonimidoyl fluorides with primary and secondary amines (100 % es, es=enantiospecificity) generating sulfonimidamides with up to 99 % ee. Aryl and alkyl sulfonimidoyl fluoride reagents are suitable for mild late stage functionalisation reactions, exemplified by coupling with a selection of complex amines in marketed drugs.

Transient imine directing groups for the C-H functionalisation of aldehydes, ketones and amines: an update 2018-2020.

The use of pre-installed directing groups has become a popular and powerful strategy to control site selectivity in transition metal catalysed C-H functionalisation reactions. However, the necessity for directing group installation and removal reduces the efficiency of a directed C-H functionalisation method. To overcome this limitation, taking inspiration from organocatalytic methodologies, the use of transient directing groups has arisen. These methods allow for a transient ligand to be used, potentially in catalytic quantities, without the need for discrete installation or removal steps, enabling the discovery of more efficient, and mechanistically intriguing, dual catalytic methods. This review summarises recent developments in this fast moving field covering >70 new methodologies, highlighting new directing group designs and advances in mechanistic understanding. It covers progress since 2018, providing an update to our previous review of the field.

Synthesis of glycosyl sulfoximines by a highly chemo- and stereoselective NH- and O-transfer to thioglycosides.

A synthesis of unprecedented and stable glycosyl sulfoximines is reported. The developed strategies represent the first example of highly stereoselective sulfoximine formation directly from thioglycosides. This synthetic protocol has been tested on several ß-thioglycosides bearing different aromatics and alkyls as S-substituents, and bearing glucose, mannose and galactose as glycosyl units. The process has been extended to a lactose derived thioglycoside and to a glucose derived sulfenamide. The process was chemo- and stereoselective, and X-ray analysis confirmed the structure and provided stereochemical information on the configuration at the sulfur atom. A model for the stereochemical outcome is proposed based on the steric environment of the sulfide.

On the Use of Differential Scanning Calorimetry for Thermal Hazard Assessment of New Chemistry: Avoiding Explosive Mistakes.

Differential scanning calorimetry (DSC) is increasingly used as evidence to support a favourable safety profile of novel chemistry, or to highlight the need for caution. DSC enables preliminary assessment of the thermal hazards of a potentially energetic compound. However, unlike other standard characterisation methods, which have well defined formats for reporting data, the current reporting of DSC results for thermal hazard assessment has shown concerning trends. Around half of all results in 2019 did not include experimental details required to replicate the procedure. Furthermore, analysis for thermal hazard assessment is often only conducted in unsealed crucibles, which could lead to misleading results and dangerously incorrect conclusions. We highlight the specific issues with DSC analysis of hazardous compounds currently in the organic chemistry literature and provide simple "best practice" guidelines which will give chemists confidence in reported DSC results and the conclusions drawn from them.

Synthesis of 3-Aryl-3-Sulfanyl Azetidines by Iron-Catalyzed Thiol Alkylation with N-Cbz Azetidinols.

New small-ring derivatives can provide valuable motifs in new chemical space for drug design. 3-Aryl-3-sulfanyl azetidines are synthesized directly from azetidine-3-ols in excellent yield by a mild Fe-catalyzed thiol alkylation. A broad range of thiols and azetidinols bearing electron-donating aromatics are successful, proceeding via an azetidine carbocation. The N-carboxybenzyl group is a requirement for good reactivity and enables the NH-azetidine to be revealed. Further reactions of the azetidine sulfides demonstrate their potential for incorporation in drug discovery programs.

Diazo-Transfer Reagent 2-Azido-4,6-dimethoxy-1,3,5-triazine Displays Highly Exothermic Decomposition Comparable to Tosyl Azide.

2-Azido-4,6-dimethoxy-1,3,5-triazine (ADT) was reported recently as a new "intrinsically safe" diazo-transfer reagent. This assessment was based on differential scanning calorimetry data indicating that ADT exhibits endothermic decomposition. We present DSC data on ADT that show exothermic decomposition with an initiation temperature ( Tinit) of 159 °C and an enthalpy of decomposition (Δ HD) of -1135 J g-1 (-207 kJ mol-1). We conclude that ADT is potentially explosive and must be treated with caution, being of comparable exothermic magnitude to tosyl azide (TsN3). A maximum recommended process temperature for ADT is 55 °C.

Synthesis of Sulfonimidamides from Sulfenamides via an Alkoxy-amino-λ6 -sulfanenitrile Intermediate.

Sulfonimidamides are intriguing new motifs for medicinal and agrochemistry, and provide attractive bioisosteres for sulfonamides. However, there remain few operationally simple methods for their preparation. Here, the synthesis of NH-sulfonimidamides is achieved directly from sulfenamides, themselves readily formed in one step from amines and disulfides. A highly chemoselective and one-pot NH and O transfer is developed, mediated by PhIO in iPrOH, using ammonium carbamate as the NH source, and in the presence of 1 equivalent of acetic acid. A wide range of functional groups are tolerated under the developed reaction conditions, which also enables the functionalization of the antidepressants desipramine and fluoxetine and the preparation of an aza analogue of the drug probenecid. The reaction is shown to proceed via different and concurrent mechanistic pathways, including the formation of novel S≡N sulfanenitrile species as intermediates. Several alkoxy-amino-λ6 -sulfanenitriles are prepared with different alcohols, and shown to be alkylating agents to a range of nucleophiles.

Rapid Assembly of Saturated Nitrogen Heterocycles in One-Pot: Diazo-Heterocycle "Stitching" by N-H Insertion and Cyclization.

Methods that provide rapid access to new heterocyclic structures in biologically relevant chemical space provide important opportunities in drug discovery. Here, a strategy is described for the preparation of 2,2-disubstituted azetidines, pyrrolidines, piperidines, and azepanes bearing ester and diverse aryl substituents. A one-pot rhodium catalyzed N-H insertion and cyclization sequence uses diazo compounds to stitch together linear 1,m-haloamines (m=2-5) to rapidly assemble 4 -, 5 -, 6 -, and 7 -membered saturated nitrogen heterocycles in excellent yields. Over fifty examples are demonstrated, including examples with diazo compounds derived from biologically active compounds. The products can be functionalized to afford α,α-disubstituted amino acids and applied to fragment synthesis.

Palladium-Catalyzed C(sp3 )-H Arylation of Primary Amines Using a Catalytic Alkyl Acetal to Form a Transient Directing Group.

C-H Functionalization of amines is a prominent challenge due to the strong complexation of amines to transition metal catalysts, and therefore typically requires derivatization at nitrogen with a directing group. Transient directing groups (TDGs) permit C-H functionalization in a single operation, without needing these additional steps for directing group installation and removal. Here we report a palladium catalyzed γ-C-H arylation of amines using catalytic amounts of alkyl acetals as transient activators (e.g. commercially available (2,2-dimethoxyethoxy)benzene). This simple additive enables arylation of amines with a wide range of aryl iodides. Key structural features of the novel TDG are examined, demonstrating an important role for the masked carbonyl and ether functionalities. Detailed kinetic (RPKA) and mechanistic investigations determine the order in all reagents, and identify cyclopalladation as the turnover limiting step. Finally, the discovery of an unprecedented off-cycle free-amine directed ϵ-cyclopalladation of the arylation product is reported.

Lithium-Catalyzed Thiol Alkylation with Tertiary and Secondary Alcohols: Synthesis of 3-Sulfanyl-Oxetanes as Bioisosteres.

3-Sulfanyl-oxetanes are presented as promising novel bioisosteric replacements for thioesters or benzyl sulfides. From oxetan-3-ols, a mild and inexpensive Li catalyst enables chemoselective C-OH activation and thiol alkylation. Oxetane sulfides are formed from various thiols providing novel motifs in new chemical space and specifically as bioisosteres for thioesters due to their similar shape and electronic properties. Under the same conditions, various π-activated secondary and tertiary alcohols are also successful. Derivatization of the oxetane sulfide linker provides further novel oxetane classes and building blocks. Comparisons of key physicochemical properties of the oxetane compounds to selected carbonyl and methylene analogues indicate that these motifs are suitable for incorporation into drug discovery efforts.

Transient imines as 'next generation' directing groups for the catalytic functionalisation of C-H bonds in a single operation.

C-H functionalisation promises a paradigm shift in synthetic planning. However, the additional steps often required to install and remove directing groups currently detract from the efficiency. The strategy of reversible installation of a directing group via an imine linkage has recently emerged, with the imine formed and hydrolysed in situ. Such transient directing groups can promote transition metal catalysed functionalisation of unactivated C-H bonds of aldehydes, ketones and amines. This approach removes additional steps usually required for covalent directing groups and can use catalytic quantities of the imine forming component. This review updates the rapidly developing field of transient directing groups for C-H functionalisation on sp2 and sp3 carbon centres, to form new C-C and C-X bonds. We focus on the structures of the transient directing groups as mono or bidentate coordinating groups for various metal catalysts.