VPT-like genes modulate Rhizobium-legume symbiosis and phosphorus adaptation.

Although vacuolar phosphate transporters (VPTs) are essential for plant phosphorus adaptation, their role in Rhizobium-legume symbiosis is unclear. In this study, homologous genes of VPT1 (MtVPTs) were identified in Medicago truncatula to assess their roles in Rhizobium-legume symbiosis and phosphorus adaptation. MtVPT2 and MtVPT3 mainly positively responded to low and high phosphate, respectively. However, both mtvpt2 and mtvpt3 mutants displayed shoot phenotypes with high phosphate sensitivity and low phosphate tolerance. The root-to-shoot phosphate transfer efficiency was significantly enhanced in mtvpt3 but weakened in mtvpt2, accompanied by lower and higher root cytosolic inorganic phosphate (Pi) concentration, respectively. Low phosphate induced MtVPT2 and MtVPT3 expressions in nodules. MtVPT2 and MtVPT3 mutations markedly reduced the nodule number and nitrogenase activity under different phosphate conditions. Cytosolic Pi concentration in nodules was significantly lower in mtvpt2 and mtvpt3 than in the wildtype, especially in tissues near the base of nodules, probably due to inhibition of long-distance Pi transport and cytosolic Pi supply. Also, mtvpt2 and mtvpt3 could not maintain a stable cytosolic Pi level in the nodule fixation zone as the wildtype under low phosphate stress. These findings show that MtVPT2 and MtVPT3 modulate phosphorus adaptation and rhizobia-legume symbiosis, possibly by regulating long-distance Pi transport.

A multicrosslinked network composite hydrogel scaffold based on DLP photocuring printing for nasal cartilage repair.

Natural hydrogels are widely employed in tissue engineering and have excellent biodegradability and biocompatibility. Unfortunately, the utilization of such hydrogels in the field of three-dimensional (3D) printing nasal cartilage is constrained by their subpar mechanical characteristics. In this study, we provide a multicrosslinked network hybrid ink made of photocurable gelatin, hyaluronic acid, and acrylamide (AM). The ink may be processed into intricate 3D hydrogel structures with good biocompatibility and high stiffness properties using 3D printing technology based on digital light processing (DLP), including intricate shapes resembling noses. By varying the AM content, the mechanical behavior and biocompatibility of the hydrogels can be adjusted. In comparison to the gelatin methacryloyl (GelMA)/hyaluronic acid methacryloyl (HAMA) hydrogel, adding AM considerably enhances the hydrogel's mechanical properties while also enhancing printing quality. Meanwhile, the biocompatibility of the multicrosslinked network hydrogels and the development of cartilage were assessed using neonatal Sprague-Dawley (SD) rat chondrocytes (CChons). Cells sown on the hydrogels considerably multiplied after 7 days of culture and kept up the expression of particular proteins. Together, our findings point to GelMA/HAMA/polyacrylamide (PAM) hydrogel as a potential material for nasal cartilage restoration. The photocuring multicrosslinked network ink composed of appropriate proportions of GelMA/HAMA/PAM is very suitable for DLP 3D printing and will play an important role in the construction of nasal cartilage, ear cartilage, articular cartilage, and other tissues and organs in the future. Notably, previous studies have not explored the application of 3D-printed GelMA/HAMA/PAM hydrogels for nasal cartilage regeneration.

Longitudinal investigation of undergraduates' radiation anxiety, interest, and career intention in interventional radiology.

PURPOSE: To evaluate the effect of the school curriculum and on-site observation of interventional radiology (IR) operations in clinics on undergraduates' radiation anxiety, interest, and career intention. METHODS: Between the academic years 2021 and 2023, all of the fourth-year undergraduates were surveyed by questionnaires, which covered their pre-curriculum, post-curriculum in-school, and post-on-site view of IR surgeries in clinic. The survey included categories of gender, fear of X-ray and IR operation, interest in IR surgery, and career-pursuing intention. RESULTS: A total of 333 (91.0%) respondents (111 students for three times) were included in analyses. The fear of X-ray and radiation exposure during IR procedures was reduced after taking school courses (p < 0.001), and it was further decreased after on-site viewing (p < 0.001). The association values among the three groups were 33.8% and 41.9%, respectively. The interest in IR was improved both after applying for the curriculum and after clinical exposure to IR surgery (p < 0.001). In addition, 4 (3.6%) and 12 (10.8%) students showed a sense of achievement after taking courses and on-site viewing, respectively. The association value was 49.4%. Regarding career intention, it was both significantly increased after taking courses and on-site observation (p < 0.001). Besides, 8 (7.2%), 17 (15.3%), and 36 (32.4%) students in the three groups considered IR as the preferred career choice, respectively. CONCLUSIONS: Applying for IR curriculum could reduce undergraduates' radiation anxiety, and activate their professional interest and career pursuing intention. Clinical exposure to IR surgeries further boosted this effect. CLINICAL RELEVANCE STATEMENT: Educational interventions of curriculum and on-site view of IR surgery improve the undergraduates' interest in IR and stimulate their career intention, which is crucial for the advancement of IR. KEY POINTS: Increasing interest in interventional radiology (IR) as a career is urgent, given rising demand of services. Education and on-site viewing of IR surgery reduced radiation anxiety and increased interest in IR. Early exposure to IR is effective at encouraging undergraduates to consider IR as their career.

3D Bioprinting-Based Dopamine-Coupled Flexible Material for Nasal Cartilage Repair.

INTRODUCTION: Since 3D printing can be used to design implants according to the specific conditions of patients, it has become an emerging technology in tissue engineering and regenerative medicine. How to improve the mechanical, elastic and adhesion properties of 3D-printed photocrosslinked hydrogels is the focus of cartilage tissue repair and reconstruction research. MATERIALS AND METHODS: We established a strategy for toughening hydrogels by mixing GelMA-DOPA (GD), which is prepared by coupling dopamine (DA) with GelMA, with HAMA, bacterial cellulose (BC) to produce composite hydrogels (HB-GD). HB-GD hydrogel scaffolds were characterized in vitro by scanning electron microscopy (SEM), Young's modulus, swelling property and rheological property tests. And biocompatibility and chondrogenic ability were tested by live/dead staining, DNA quantitative analysis and immunofluorescence staining. Combined with 3D bioprinting technology, mouse chondrocytes (ADTC5) were added to form a biological chain to construct an in vitro model, and the feasibility of the model for nasal cartilage regeneration was verified by cytology evaluation. RESULTS: With the increase of GD concentration, the toughness of the composite hydrogel increased (47.0 ± 2.7 kPa (HB-5GD)-158 ± 3.2 kPa (HB-20GD)), and it had excellent swelling properties, rheological properties and printing properties. The HB-GD composite hydrogel promoted the proliferation and differentiation of ATDC5. Cells in 3D printed scaffolds had higher survival rates (> 95%) and better protein expression than the encapsulated cultures. CONCLUSION: The HB-10GD hydrogel can be made into a porous scaffold with precise shape, good internal pore structure, high mechanical strength and good swelling rate through extrusion 3D printing. NO LEVEL ASSIGNED: This journal requires that authors assign a level of evidence to each submission to which Evidence-Based Medicine rankings are applicable. This excludes Review Articles, Book Reviews, and manuscripts that concern Basic Science, Animal Studies, Cadaver Studies, and Experimental Studies. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266.

Multi-Functional Integration of Phosphor, Initiator, and Crosslinker for the Photo-Polymerization of Flexible Phosphorescent Polymer Gels.

A general approach to constructing room temperature phosphorescence (RTP) materials involves the incorporation of a phosphorescent emitter into a rigid host or polymers with high glass transition temperature. However, these materials often suffer from poor processability and suboptimal mechanical properties, limiting their practical applications. In this work, we developed benzothiadiazole-based dialkene (BTD-HEA), a multifunctional phosphorescent emitter with a remarkable yield of intersystem crossing (ΦISC, 99.83 %). Its high triplet exciton generation ability and dialkene structure enable BTD-HEA to act as a photoinitiator and crosslinker, efficiently initiating the polymerization of various monomers within 120 seconds. A range of flexible phosphorescence gels, including hydrogels, organogels, ionogels, and aerogels were fabricated, which exhibit outstanding stretchability and recoverability. Furthermore, the unique fluorescent-phosphorescent colorimetric properties of the gels provide a more sensitive method for the visual determination of the polymerization process. Notably, the phosphorescent emission intensity of the hydrogel can be increased by the formation of ice, allowing for the precise detection of hydrogel freezing. The versatility of this emitter paves the way for fabricating various flexible phosphorescence gels with diverse morphologies using microfluidics, film-shearing, roll coating process, and two/three-dimensional printing, showcasing its potential applications in the fields of bioimaging and bioengineering.

3D printing to construct in vitro multicellular models of melanoma.

Currently, there is a lack of suitable models for in-vitro studies of malignant melanoma and traditional single cell culture models no longer reproduce tumor structure and physiological complexity well. The tumor microenvironment is closely related to carcinogenesis and it is particularly important to understand how tumor cells interact and communicate with surrounding nonmalignant cells. Three-dimensional (3D) in vitro multicellular culture models can better simulate the tumor microenvironment due to their excellent physicochemical properties. In this study, 3D composite hydrogel scaffolds were prepared from gelatin methacrylate and polyethylene glycol diacrylate hydrogels by 3D printing and light curing techniques, and 3D multicellular in vitro tumor culture models were established by inoculating human melanoma cells (A375) and human fibroblasts cells on them. The cell proliferation, migration, invasion, and drug resistance of the 3D multicellular in vitro model was evaluated. Compared with the single-cell model, the cells in the multicellular model had higher proliferation activity and migration ability, and were easy to form dense structures. Several tumor cell markers, such as matrix metalloproteinase-9 (MMP-9), MMP-2, and vascular endothelial growth factor, were highly expressed in the multicellular culture model, which were more favorable for tumor development. In addition, higher cell survival rate was observed after exposure to luteolin. The anticancer drug resistance result of the malignant melanoma cells in the 3D bioprinted construct demonstrated physiological properties, suggesting the promising potential of current 3D printed tumor model in the development of personalized therapy, especially for discovery of more conducive targeted drugs.

Transarterial viroembolization improves the therapeutic efficacy of immune-excluded liver cancer: Three birds with one stone.

OBJECTIVE: To investigate the mechanism and efficacy of transarterial viroembolization (TAVE) with an oncolytic virus (OH2) for the treatment of liver cancer in rabbit VX2 tumor models. MATERIALS AND METHODS: Subcutaneous tumor and liver cancer models were established to determine the optimal viral titer and administration modality of OH2. Different liver cancer models were established to evaluate the locoregional tumor response, synergistic and standby effects, survival benefit, and specific antitumor immune memory after TAVE treatment. The immune cell densities in tumor tissues were measured. RESULTS: The optimal viral titer of OH2 was 1 × 107 CCID50. TAVE was the most effective modality with greater homogeneous OH2 distribution and therapeutic efficacy compared to other administration routes of transarterial virus infusion (TAVI), commonly adopted intratumor injection (TI), and intravenous injection (IV). Additionally, TAVE treatment significantly improved the locoregional tumor response, standby effect, and survival benefit compared to the TAVI, transarterial embolization (TAE), and control groups. TAVE modified the immune cell densities for immune-excluded liver cancer, partially destroyed vessel metastases, and established antitumor immune memory. The synergistic treatment efficacy of TAVE was superior to the simple addition of two independent monotherapies. CONCLUSION: TAVE was the optimal and a safe modality for treating immune-excluded liver cancer, and its synergistic effect achieved a remarkable tumor response, standby effect, survival benefit, and antitumor immune memory, which providing an innovative therapeutic modality for clinical practice. DATA AVAILABILITY: Data is available from the corresponding author upon requirement.

Ultralow-dose [18F]FDG PET/CT imaging: demonstration of feasibility in dynamic and static images.

OBJECTIVES: Validation of [18F]FDG PET/CT at ultralow-dose (0.37 MBq/kg) and compared to imaging at half-dose (1.85 MBq/kg). METHODS: This prospective head-to-head intraindividual study compared dynamic and static parameters of ultralow-dose with half-dose [18F]FDG total-body PET/CT. In static imaging, the ultralow-dose groups of PET images were denoted ULD5, 60-65 min; ULD8, 60-68 min; ULD10, 60-70 min; and ULD15, 60-75 min. The half-dose group images were reconstructed to 60-61, 60-62, 60-63, and 60-75 min, defined as LD1, LD2, LD3, and LD15, respectively. A 5-point Likert scale was used to subjectively evaluate the quality of static PET images, with a score greater than 3 considered to meet the requirements for clinical diagnosis. RESULTS: Thirty participants were included in this study, and in terms of kinetic indicators, no special differences were found between the two groups of normal organs and lesions. In static images, those in groups ULD8 and LD2 achieved scores of [Formula: see text] 3.0, meeting the requirements for clinical diagnosis. In static imaging, four lesions were missed in the LD1 group with a lesion detectability of 89.7% (35/39). In the meantime, lesions were not missed in the whole ultra-low dose group (ULD5, ULD8, ULD10, and ULD15) and half-dose groups (LD2 and LD3). CONCLUSIONS: Compared with half-dose imaging, ultralow-dose [18F]FDG total-body PET/CT imaging is clinically feasible, and there was no meaningful difference between the two groups of quantitative and qualitative analysis either dynamic or static images. Total-body PET/CT with ultralow-dose activity, the corresponding acquisition time of 8 min provides acceptable image quality and lesion detection. TRIAL REGISTRATION: ClinicalTrials.gov identifier: ChiCTR2000036487 KEY POINTS: • A prospective single-center study showed that the total-body PET scanner allows ultralow-dose [18F]FDG imaging with acceptable image quality and lesion detectability. • For the participant, radiation exposure can be reduced with ultralow-dose [18F]FDG total-body PET/CT imaging.

Crystal phase engineering of nanoflower-like hollow MoSe2boosting polysulfide conversion for lithium-sulfur batteries.

The battery performance of sulfur cathode has obviously depended on the redox reaction kinetics of polysulfides upon cycling. Herein, an effective strategy was proposed to achieve the conversion from 2H (semiconductor phase) to 1T (metal phase) in hollow nano-flowered molybdenum selenide sphere (HFSMS) through crystal phase engineering. The HFSMS with different phase ratio was realized by regulating the proportion of reducing agents. Specifically, the 1T phase content can reach up to 60.8%, and then subsequently decreased to 59.1% with the further increase of the reducing agent. The as-prepared HFSMS with the 1T phase content of 60.8% showed a smallest Tafel slopes (49.99 and 79.65 mV/dec in reduction and oxidation process, respectively), fastest response time and highest response current (520 s, 0.459 mA in Li2S deposition test), which further exhibited excellent catalytic activity and faster reaction kinetics. This result was verified by electrochemical performance, which manifested as stable cycle life with only 0.112% capacity decay per cycle. It was found that the hollow structure can ensures a rich sulfur storage space, and effectually buffer the volume changes of the active substance. More importantly, the improved performance is attributed to the introduction of the 1T phase, which significantly improves the catalytic activity of MoSe2with promoting the polysulfide conversion.

Collagen-coated agarose-chitosan scaffold used as a skin substitute.

A single biomaterial is disadvantageous for constructing skin in vitro, so a mixed biomaterial is more conducive to skin research. In this study, agarose-chitosan scaffolds with a final concentration of 4% were constructed by freeze-drying, in which the concentration ratios of agarose to chitosan were 1:3, 2:2, and 3:1. The scaffolds were coated with a 3 mg/ml collagen solution, and the mechanical properties were evaluated by studying density, porosity, swelling rate, and degradation rate. The results demonstrated that the agarose-chitosan scaffolds were porous, with porosity reaching 93%. Their densities ranged from 0.1 to 0.16 g/cm3 . Analysis of Young's modulus showed that the mechanical properties of the agarose-chitosan scaffolds were significantly enhanced when the agarose content in the agarose-chitosan scaffolds was increased. Moreover, the density and Young's modulus of the agarose-chitosan scaffolds of different concentration ratios were significantly different (p < 0.01). These scaffolds can withstand a certain amount of external pressure, such as that of human skin, making them more suitable for further skin replacement research. In addition, the results of thiazolyl blue tetrazolium bromide (MTT) cell assay and immunofluorescence staining showed that the collagen-coated agarose-chitosan scaffolds were conducive to keratinocyte proliferation and differentiation. The MTT results revealed significant differences between the agarose-chitosan scaffolds coated with collagen and the agarose-chitosan scaffolds without collagen (p < 0.05). This study provides the potential for in vitro skin research and applications.

Injectable hydrogel loaded with lysed OK-432 and doxorubicin for residual liver cancer after incomplete radiofrequency ablation.

OBJECTIVE: To investigate the efficacy of an injectable hydrogel loaded with lysed OK-432 (lyOK-432) and doxorubicin (DOX) for residual liver cancer after incomplete radiofrequency ablation (iRFA) of hepatocellular carcinoma (HCC), and explore the underlying mechanism. MATERIALS AND METHODS: The effect of OK-432 and lyOK-432 was compared in activating dendritic cells (DCs). RADA16-I (R) peptide was dissolved in a mixture of lyOK-432 (O) and DOX (D) to develop an ROD hydrogel. The characteristics of ROD hydrogel were evaluated. Tumor response and mice survival were measured after different treatments. The number of immune cells and cytokine levels were measured, and the activation of cGAS/STING/IFN-I signaling pathway in DC was evaluated both in vitro and in vivo. RESULTS: LyOK-432 was more effective than OK-432 in promoting DC maturation and activating the IFN-I pathway. ROD was an injectable hydrogel for effectively loading lyOK-432 and DOX, and presented the controlled-release property. ROD treatment achieved the highest tumor necrosis rate (p < 0.001) and the longest survival time (p < 0.001) compared with the other therapies. The ROD group also displayed the highest percentages of DCs, CD4+ T cells and CD8+ T cells (p < 0.001), the lowest level of Treg cells (p < 0.001), and the highest expression levels of IFN-γ and TNF-α (p < 0.001) compared with the other groups. The expression levels of pSTING, pIRF3, and IFN-ß in DCs were obviously higher after treatment of lyOK-432 in combination with DOX than the other therapies. The surviving mice in the ROD group showed a growth inhibition of rechallenged subcutaneous tumor. CONCLUSION: The novel ROD peptide hydrogel induced an antitumor immunity by activating the STING pathway, which was effective for treating residual liver cancer after iRFA of HCC.

Temperature sensitive nanogel-stabilized pickering emulsion of fluoroalkane for ultrasound guiding vascular embolization therapy.

Various X-ray imaging technologies like computed tomography (CT) and digital subtraction angiography (DSA) are widely used in transcatheter arterial embolization (TAE) therapy for treating hepatocellular cancer (HCC) patients. Although they display high-contrast imaging, they have a few disadvantages, such as complex operation and exposure to ionizing radiation. Thus, ultrasound (US) imaging plays an important role in medical diagnosis because of its advantages, like simple and fast operation, no ionizing radiation exposure, and accurate real-time imaging. Subsequently, Poly N-isopropylacrylamide-co-2,2,3,4,4,4-Hexafluorobutyl methacrylate (PNF) nanogels were synthesized for stabilizing TGFPE, the Pickering emulsions of 2H, 3H-decafluoropentane (HDFP). These emulsions displayed dual abilities of thermosensitive sol-gel transition and long-term US imaging in vitro. Thus, it was concluded that these emulsions could achieve vascular embolization and long-term US imaging in vivo as per the TAE animal model results. The emulsion droplets' flow and accumulation were visualized under the US imaging guidance. In summary, the Pickering emulsions have the potential to be used as US-guided embolization material for mediating TAE surgeries.

Effect of Wearing N95 Mask on the Quality of Chest Compressions in Prehospital Emergency Personnel: A Cross-over Study.

OBJECTIVE: To evaluate the effect of wearing an N95 mask on the quality of chest compression and fatigue of prehospital emergency personnel during cardiopulmonary resuscitation (CPR). METHODS: Twenty-four eligible participants were recruited. Participants' age, sex, height, and weight were recorded. After completing the CPR training and examination, participants were tested twice, wearing surgical mask or an N95 mask, while performing chest compressions for 2 minutes. The quality of chest compression (including compression frequency, depth, rebound, and position) was recorded by the simulator. Borg fatigue scores and physiological parameters (including heart rate, mean arterial pressure, pulse oxygen saturation, and respiratory rate) were recorded before and after chest compressions. RESULTS: Compared to wearing surgical masks, participants wearing N95 masks had significantly lower quality of chest compression, including compression frequency (98.3 ± 4.9 bpm vs 104.0 ± 6.0 bpm, P < 0.001), depth (47.1 ± 4.5 mm vs 50.5 ± 5.4 mm, P < 0.001), and rebound (90.2 ± 2.7% vs 94.3 ± 2.1%, P < 0.001). The compression position was not affected. The period data showed that the difference in compression quality started after 1 minute of compressions. Participants wearing N95 masks had higher Borg fatigue scores [6.1(2) vs 5.1(2), P < 0.001], heart rates (121.2 ± 5.7 bpm vs 109.9 ± 6.0 bpm, P < 0.001), mean arterial pressures (106.3 ± 8.0 mmHg vs 99.0 ± 8.5 mmHg, P = 0.012), and respiratory rates (29.5 ± 2.7 bpm vs 24.7 ± 2.5 bpm, P < 0.001). CONCLUSION: This study showed that the use of an N95 mask by prehospital emergency personnel during the performance of chest compressions resulted in a reduction of compression quality and increased clinician fatigue. There is a need for CPR training for medical personnel wearing personal protective equipment.

Effect of perioperative ultrasound guided fascia iliaca compartment block in elderly adults with hip fractures undergoing arthroplasty in spinal anesthesia-a randomized controlled trial.

BACKGROUND: For elderly adults undergoing hip arthroplasty, fascia iliaca compartment block (FICB) is often used before spinal anesthesia to reduce the pain of posture placement. However, the impact of FICB within 48 h needs further study. METHODS: 89 elderly adults scheduled to undergo arthroplasty for hip fracture were enrolled and randomized into the FICB group (n = 45) and the control group (n = 44). The fascia iliaca on the operated side was located using ultrasound, and a puncture needle was placed under the fascia iliaca. The FICB group was injected with 40 ml of 0.5% ropivacaine, and the control group was injected with 40 ml of normal saline. Spinal anesthesia was performed after 20 min. Our primary outcome measures were: duration of analgesia, muscle strength, and Quality of Recovery (QoR). RESULTS: The duration of analgesia in the FICB group was 403.5 ± 39.6 min, which was longer than that (357.5 ± 35.9 min) of the control group (P = 0.012). There were 19 (42.2%) patients with muscle strength of grade 4 in the FICB group and 36 (81.8%) patients with muscle strength of grade 4 in the control group. FICB group was lower (P < 0.001). QoR-15 at 24 h after surgery was 114.1 ± 8.3 in the FICB group and 104.6 ± 8.4 in the control group (P < 0.001). QoR-15 at 48 h after surgery was 122.7 ± 8.4 in the FICB group and 120.5 ± 9.5 in the control group (P = 0.232). CONCLUSIONS: For elderly adults with hip fractures, FICB provided longer analgesia and improved 24-h QoR, but reduced postoperative muscle strength. TRAIL REGISTRATION: Chinese Clinical Registry Center, ChiCTR2200056937, 23/02/2022.

Application of a preoperative pain management mode based on instant messaging software in elderly hip fracture patients: a randomized controlled trial.

BACKGROUND: Preoperative analgesia of hip fracture in elderly patients is important, but it is also lacking. In particular, nerve block was not provided in time. In order to provide more effective analgesia, we designed a multimodal pain management mode based on instant messaging software. METHODS: From May to September 2022, a total of 100 patients with unilateral hip fracture aged over 65 were randomly divided into the test group and the control group. Finally, 44 patients in each group completed the result analysis. A new pain management mode was used in the test group. This mode focuses on the full information exchange between medical personnel in different departments, early fascia iliaca compartment block (FICB), and closed-loop pain management. Outcomes include the time when FICB is completed for the first time; The number of cases of FICB completed by emergency doctors; Patients' pain score, pain duration. RESULTS: The time for patients in the test group to complete FICB for the first time was 3.0 [1.925-3.475] h, which was less than the time for patients in the control group (4.0 [3.300-5.275] h). The difference was statistically significant (P < 0.001). Compared with 16 patients in the control group, 24 patients in the test group completed FICB by emergency doctors, and there was no statistical difference between the two groups (P = 0.087). The test group was superior to the control group in the highest NRS score (4.00 [3.00-4.00] vs 5.00 [4.00-5.75]), the duration of the highest NRS score (20.00 [20.00-25.00] mins vs 40.00 [30.00-48.75] mins), and the NRS > 3 time (35.00 [20.00-45.00] mins vs 72.50 [60.00-45.00] mins). The analgesic satisfaction of patients in the test group (5.00 [4.00-5.00]) was also significantly higher than that of the control group (3.00 [3.00-4.00]). The above four indexes were different between the two groups (P < 0.001). CONCLUSIONS: Using instant messaging software, the new model of pain management can enable patients to receive FICB as soon as possible and improve the timeliness and effectiveness of analgesia. TRIAL REGISTRATION: Chinese Clinical Registry Center, ChiCTR2200059013, 23/04/2022.

[Clinical, genetic, and pathological analysis in 165 children with disorders of sex development]. / 165ä¾‹å„¿ç«¥æ€§å‘è‚²å¼‚å¸¸ç–¾ç— çš„ä¸´åºŠã€é—ä¼ å­¦ä¸Žç— ç†å­¦åˆ†æž.

OBJECTIVES: To investigate the clinical phenotypes, genetic characteristics, and pathological features of children with disorders of sex development (DSD). METHODS: A retrospective analysis was conducted on epidemiological, clinical phenotype, chromosomal karyotype, gonadal pathology, and genotype data of 165 hospitalized children with DSD at Children's Hospital of Hebei Province and Tangshan Maternal and Child Health Hospital from August 2008 to December 2022. RESULTS: Among the 165 children with DSD, common presenting symptoms were short stature (62/165, 37.6%), clitoromegaly (33/165, 20.0%), cryptorchidism (28/165, 17.0%), hypospadias (24/165, 14.5%), and skin pigmentation abnormalities/exteriorized pigmented labia majora (19/165, 11.5%). Chromosomal karyotype analysis was performed on 127 cases, revealing 36 cases (28.3%) of 46,XX DSD, 34 cases (26.8%) of 46,XY DSD, and 57 cases (44.9%) of sex chromosome abnormalities. Among the sex chromosome abnormal karyotypes, the 45,X karyotype (11/57, 19%) and 45,X/other karyotype mosaicism (36/57, 63%) were more common. Sixteen children underwent histopathological biopsy of gonadal tissues, resulting in retrieval of 25 gonadal tissues. The gonadal tissue biopsies revealed 3 cases of testes, 3 cases of dysplastic testes, 6 cases of ovaries, 11 cases of ovotestes, and 1 case each of streak gonad and agenesis of gonads. Genetic testing identified pathogenic/likely pathogenic variants in 23 cases (23/36, 64%), including 12 cases of 21-hydroxylase deficiency congenital adrenal hyperplasia caused by CYP21A2 pathogenic variants. CONCLUSIONS: Short stature, clitoromegaly, cryptorchidism, hypospadias, and skin pigmentation abnormalities are common phenotypes in children with DSD. 45,X/other karyotype mosaicism and CYP21A2 compound heterozygous variants are major etiological factors in children with DSD. The most commonly observed gonadal histopathology in children with DSD includes ovotestes, ovaries, and testes/dysgenetic testes.

Multi-functional high-efficiency light beam splitter based on metagrating.

Inspired by the concept of phase-gradient metasurfaces (PGMs), we present a way to design a multi-functional PGM-based light beam splitter (LBS) operating in the optical regime by engineering the anomalous diffraction properties. As an example of a proof of concept, the designed LBS is a purely metallic slit array with gradient slit width, termed metagrating. It is shown that the designed LBS can simultaneously achieve high-efficiency light beam splitting on both energy and polarization, and it has broadband and wide-angle response. In addition, we also show that the Ohmic loss of metals plays an important role in determining the diffraction efficiency of each diffraction order, which is the physics for designing the LBS that can deliver the incident energy equally into the reflection and refraction sides. Our work enriches the existing methods of designing LBSs and particularly provides a route for the design of multi-functional LBSs with high performance.

Photo-crosslinked hydrogels for tissue engineering of corneal epithelium.

The vast majority of patients with corneal blindness cannot recover their vision due to the serious shortage of donor cornea. However, the technology to construct a feasible corneal substitute is a promising treatment method for corneal blindness. In this paper, methacrylated gelatin (GelMA)-methacrylated hyaluronic acid (HAMA) double network (GHDN) hydrogels were prepared by modifying gelatin and hyaluronic acid with methacrylate anhydride (MA). GHDN hydrogel was compared with GelMA single network and HAMA single network hydrogels through characterization experiments of mechanical properties, optical properties, hydrophilicity and in-situ degradation in vitro. At the same time, the biocompatibility of hydrogel was tested by inoculating rabbit corneal epithelial cells (CEpCs) epidermal cells on hydrogels using CCK-8 test, live/dead staining, immunofluorescence staining and qRT-PCR. It was found that the GHDN hydrogel has optical transparency in the visible region, and its mechanical properties are better than those of GelMA and HAMA hydrogels, and its hydrophilicity is similar to that of normal human corneas. The results of in vitro hydrogel culture of CEpCs showed that the proliferation of CEpCs on GHDN hydrogel was two times higher than that of HAMA hydrogel, and the expression of specific marker Cytokeratin 3 (CK3) and Cytokeratin 12 (CK12) could be better maintained on GHDN hydrogel. All the experimental results proved that GHDN hydrogel has good physical properties and biocompatibility and is a potential candidate for corneal tissue engineering scaffolds.

Tumor feeding artery contraction and metastasis inhibition after transarterial chemoembolization combined with apatinib for hepatocellular carcinoma: A propensity score matching study.

AIM: To investigate the change of tumor feeding artery diameter and the efficacy of metastasis inhibition after transarterial chemoembolization (TACE) combined with apatinib or TACE monotherapy for patients with advanced hepatocellular carcinoma who without metastasis. MATERIALS AND METHODS: A total of 616 consecutive patients who received the treatment of TACE-apatinib or TACE in our center was enrolled. Propensity score matching (PSM) analysis was used to reduce bias. The overall survival (OS), OS-after-metastasis (OSM), time to progression (TTP), time to metastasis (TTM), time to vessel or organ metastasis (TVOM), time to lymph node metastasis, and tumor feeding artery diameter between the two treatment groups were compared. RESULTS: A total of 113 pairs of patients were eligible after the PSM. Time to lymph node metastasis between the two groups was not significantly different (P > 0.05). The tumor feeding artery diameter was significantly smaller after TACE-apatinib management (P < 0.001). Median OS (P < 0.001) and OSM (P < 0.001) were significantly longer in the TACE-apatinib group compared with the TACE group. Median TTP (P < 0.001), TTM (P < 0.001), and TVOM (P < 0.001) were significantly prolonged in TACE-apatinib group. CONCLUSION: TACE-apatinib treatment could improve the prognosis compared with TACE alone, and inhibit metastasis after TACE procedure with contracted tumor feeding artery for advanced HCCs without metastasis.

Progress of 3D Printing Techniques for Nasal Cartilage Regeneration.

Once cartilage is damaged, its self-repair capacity is very limited. The strategy of tissue engineering has brought a new idea for repairing cartilage defect and cartilage regeneration. In particular, nasal cartilage regeneration is a challenge because of the steady increase in nasal reconstruction after oncologic resection, trauma, or rhinoplasty. From this perspective, three-dimensional (3D) printing has emerged as a promising technology to address the complexity of nasal cartilage regeneration, using patient's image data and computer-aided deposition of cells and biomaterials to precisely fabricate complex, personalized tissue-engineered constructs. In this review, we summarized the major progress of three prevalent 3D printing approaches, including inkjet-based printing, extrusion-based printing and laser-assisted printing. Examples are highlighted to illustrate 3D printing for nasal cartilage regeneration, with special focus on the selection of seeded cell, scaffolds and growth factors. The purpose of this paper is to systematically review recent research about the challenges and progress and look forward to the future of 3D printing techniques for nasal cartilage regeneration.Level of Evidence III This journal requires that authors assign a level of evidence to each submission to which Evidence-Based Medicine rankings are applicable. This excludes Review Articles, Book Reviews, and manuscripts that concern Basic Science, Animal Studies, Cadaver Studies, and Experimental Studies. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors https://www.springer.com/00266 .