Low-Temperature and Fast-Charging Lithium Metal Batteries Enabled by Solvent-Solvent Interaction Mediated Electrolyte.

Lithium metal batteries utilizing lithium metal as the anode can achieve a greater energy density. However, it remains challenging to improve low-temperature performance and fast-charging features. Herein, we introduce an electrolyte solvation chemistry strategy to regulate the properties of ethylene carbonate (EC)-based electrolytes through intermolecular interactions, utilizing weakly solvated fluoroethylene carbonate (FEC) to replace EC, and incorporating the low-melting-point solvent 1,2-difluorobenzene (2FB) as a diluent. We identified that the intermolecular interaction between 2FB and solvent can facilitate Li+ desolvation and lower the freezing point of the electrolyte effectively. The resulting electrolyte enables the LiNi0.8Co0.1Mn0.1O2||Li cell to operate at -30 °C for more than 100 cycles while delivering a high capacity of 154 mAh g-1 at 5.0C. We present a solvation structure and interfacial model to analyze the behavior of the formulated electrolyte composition, establishing a relationship with cell performance and also providing insights for the electrolyte design under extreme conditions.

Modulating Decarboxylative Oxidation Photocatalysis by Ligand Engineering of Atomically Precise Copper Nanoclusters.

Copper nanoclusters (Cu NCs) characterized by their well-defined electronic and optical properties are an ideal platform for organic photocatalysis and exploring atomic-level behaviors. However, their potential as greener, efficient catalysts for challenging reactions like decarboxylative oxygenation under mild conditions remains unexplored. Herein, we present Cu13(Nap)3(PPh3)7H10 (hereafter Cu13Nap), protected by 1-naphthalene thiolate (Nap), which performs well in decarboxylative oxidation (90% yield) under photochemical conditions. In comparison, the isostructural Cu13(DCBT)3(PPh3)7H10 (hereafter Cu13DCBT), stabilized by 2,4-dichlorobenzenethiolate (DCBT), yields only 28%, and other previously reported Cu NCs (Cu28, Cu29, Cu45, Cu57, and Cu61) yield in the range of 6-18%. The introduction of naphthalene thiolate to the surface of Cu13 NCs influences their electronic structure and charge transfer in the ligand shell, enhancing visible light absorption and catalytic performance. Density functional theory (DFT) and experimental evidence suggest that the reaction proceeds primarily through an energy transfer mechanism. The energy transfer pathway is uncommon in the context of previous reports for decarboxylative oxidation reactions. Our findings suggest that strategically manipulating ligands holds significant potential for creating composite active sites on atomically precise copper NCs, resulting in enhanced catalytic efficacy and selectivity across various challenging reactions.

High-Throughput Computational Screening of Metal Sulfides for the Chemical Looping Elemental Decomposition of H2S.

Hydrogen sulfide is a significant byproduct of oil and gas production and is typically recovered as elemental sulfur, a low-value commodity. In recent years, there have been efforts to upgrade H2S through elemental decomposition to S and H2, an essential energy carrier in a sustainable economy. Among the promising approaches is thermocatalytic looping, which involves a sulfide-based redox pair. Unfortunately, the search for sulfides capable of facilitating this conversion is progressing slowly, and primarily focusing on monometallic sulfides. With a few notable exceptions, the field of bimetallic sulfide remains largely unexplored. In this study, a machine learning framework is employed to explore the material space of mono and bimetallic sulfides. The workflow begins by mining sulfides from the Materials Project database, allowing the workflow to be benchmarked using formation enthalpies derived from established density functional theory calculations. Through the machine learning framework, the number of bimetallic sulfide redox pairs considered is expanded from 102 cases in the Materials Project database to 105 cases. This expansion allows for the identification trends that can serve as guidelines for future research and helps prioritize materials for experimental testing.

The Resorcinarene Hexameric Capsule as a Supramolecular Photoacid to Trigger Olefin Hydroarylation in Confined Space.

The self-assembled resorcinarene capsule C6 shows remarkable photoacidity upon light irradiation, which is here exploited to catalyze olefin hydroarylation reactions in confined space. An experimental pKa* value range of -3.3--2.8 was estimated for the photo-excited hexameric capsule C6*, and consequently an increase in acidity of 8.8 log units was observed with respect to its ground state (pKa=5.5-6.0). This makes the hexameric capsule the first example of a self-assembled supramolecular photoacid. The photoacid C6* can catalyze hydroarylation reaction of olefins with aromatic substrates inside its cavity, while no reaction occurred between them in the absence of irradiation and/or capsule. DFT calculations corroborated a mechanism in which the photoacidity of C6* plays a crucial role in the protonation step of the aromatic substrate. A further proton transfer to olefin with a concomitant C-C bond formation and a final deprotonation step lead to product releasing.

Unveiling structural and energetic characterization of the emissive RNA alphabet anchored in the methylthieno[3,4-d]pyrimidine heterocycle core.

This study presents a comprehensive theoretical exploration of the fluorescent non-natural emissive nucleobases- mthA, mthG, mthC, and mthU derived from the methylthieno[3,4-d]pyrimidine heterocycle. Our calculations, aligning with experimental findings, reveal that these non-natural bases exert minimal influence on the geometry of classical Watson-Crick base pairs within an RNA duplex, maintaining H-bonding akin to natural bases. In terms of energy, the impact of the modified bases, but for mthG, is also found to be little significant. We delved into an in-depth analysis of the photophysical properties of these non-natural bases. This investigation unveiled a correlation between their absorption/emission peaks and the substantial impact of the modification on the energy levels of the highest unoccupied molecular orbitals (HOMO) and the lowest unoccupied molecular orbital (LUMO). Notably, this alteration in energy levels resulted in a significant reduction of the HOMO-LUMO gap, from approximately 5.4-5.5 eV in the natural bases, to roughly 3.9-4.7 eV in the modified bases. This shift led to a consequential change in absorption and emission spectra towards longer wavelengths, elucidating their bathochromic shift.

Occurrence and stability of anion-π interactions between phosphate and nucleobases in functional RNA molecules.

We present a systematic structural and energetic characterization of phosphate(OP)-nucleobase anion…π stacking interactions in RNAs. We observed OP-nucleobase stacking contacts in a variety of structural motifs other than regular helices and spanning broadly diverse sequence distances. Apart from the stacking between a phosphate and a guanine or a uracil two-residue upstream in specific U-turns, such interactions in RNA have been scarcely characterized to date. Our QM calculations showed an energy minimum at a distance between the OP atom and the nucleobase plane centroid slightly below 3 Å for all the nucleobases. By sliding the OP atom over the nucleobase plane we localized the optimal mutual positioning of the stacked moieties, corresponding to an energy minimum below -6 kcal•mol-1, for all the nucleobases, consistently with the projections of the OP atoms over the different π-rings we observed in experimental occurrences. We also found that the strength of the interaction clearly correlates with its electrostatic component, pointing to it as the most relevant contribution. Finally, as OP-uracil and OP-guanine interactions represent together 86% of the instances we detected, we also proved their stability under dynamic conditions in model systems simulated by state-of-the art DFT-MD calculations.

Endonasal Route for Tuberculum and Planum Meningiomas.

Tuberculum and planum meningiomas are challenging tumors per their critical location and neurovascular relationships. The standard treatment is usually represented by complete tumor removal, being the transcranial approaches the well-established routes. During the last decades, novel surgical routes have been experimented with emphasis on the concept of minimal invasive approaches. The peculiar perspective from below the endoscopic endonasal approach provides a short and direct access avoiding brain and neurovascular structures manipulation, featuring excellent outcomes and a reduced morbidity. Ideal indications are small or medium size midline meningiomas, with wide tuberculum sellae angle and deep sella at the sphenoid sinus, possibly with no optic nerve and/or vessels encasement. Adequate removal of paranasal structures and extended bony opening over the dural attachment provide a wide surgical corridor ensuring safe intradural exposure at the suprasellar area. The main advantage is related to early decompression of the optic apparatus and reduced manipulation of subchiasmatic perforating vessels, with improved visual outcomes. Direct exposure of the inferomedial aspect of the optic canals allows for maximal decompression in cases of tumor extending within. Transcranial approaches tend to be selected for larger tumors with lateral extension beyond optic nerves and supraclinoid carotid arteries, in inaccessible areas from an endonasal corridor.

Transorbital Route to Intracranial Space.

The endoscopic superior eyelid transorbital approach has emerged as a notable and increasingly utilized surgical technique in recent years. This chapter presents an overview of the approach, tracing its historical development and highlighting its growing acceptance within the skull base community.Beginning with an introduction and historical perspective, the chapter outlines the evolution of the transorbital approach, shedding light on its origins and the factors driving its adoption. Subsequently, a comprehensive exploration of the anatomic bone pillars and intracranial spaces accessible via this approach is provided. Hence, five bone pillars of the transorbital approach were identified, namely the lesser sphenoid wing, the anterior clinoid, the sagittal crest, the middle cranial fossa, and the petrous apex. A detailed correlation of those bone targets with respective intracranial areas has been reported.Furthermore, the chapter delves into the practical application of the technique through a case example, offering insights into its clinical utility, indications, and limitations.

From data to practice: brain meningioma treatment in elderly patients - a survey of the Italian Society of Neurosurgery (SINch®) and systematic review and meta-analysis.

The management of meningioma in elderly patients (MEP) presents a complex and evolving challenge. Data available offer conflicting information on treatment options and complications. This survey aimed to examine the current approach to MEP, comparing the national profile to data in the current literature. A survey addressing the treatments options and management of meningioma in elderly was designed on behalf of SINch® (Società Italiana di Neurochirurgia) and sent via email to all Chiefs of Neurosurgical Departments. The survey remained open for responses from May 5th, 2022, until November 21st, 2022. A search of the literature published between January 2000 and March 2023, in accordance to PRISMA guidelines, was included. A total of 51 Neurosurgical centers participated in the survey. The caseload profile of each center influences the choice of treatment selection (Stereotactic Radiosurgery versus open surgery) (p = 0.01) and the consolidated practice of discussing cases within a multidisciplinary group (p = 0.02). The pooled meta-analysis demonstrated a significant increased risk in the elderly group for permanent deficits (p < 0.00001), postoperative infections (p = 0.0004) and hemorrhage (p = 0.0001), perioperative mortality (p < 0.00001), and medical complications (p < 0.00001) as compared to the young population. This study presents the initial comprehensive analysis of the existing trends in the surgical management of MEP in Italy. The significant variation in practices primarily stems from the absence of standardized guidelines. While most centers have adopted an integrated approach, there is a need to promote a multidisciplinary care model. Prospective studies are needed to gather robust evidence in this clinical setting.

Open-door extended endoscopic transorbital technique to the paramedian anterior and middle cranial fossae: technical notes, anatomomorphometric quantitative analysis, and illustrative case.

OBJECTIVE: The superior eyelid endoscopic transorbital approach (SETOA) provides a direct and short minimally invasive route to the anterior and middle skull base. Nevertheless, it uses a narrow corridor that limits its angles of attack. The aim of this study was to evaluate the feasibility and potential benefits of an "extended" conservative variant of the "standard" endoscopic transorbital approach-termed "open-door"-to enhance the exposure of lesions affecting the paramedian aspect of the anterior and middle cranial fossae. METHODS: First, the authors described the technical nuances of the open-door extended transorbital approach (ODETA). Next, they documented its morphometric advantages over standard SETOA. Finally, they provided a clinical-anatomical application to demonstrate enhanced exposure and better angles of attack to treat lesions occupying the paramedian anterior and middle cranial fossae. Five adult cadaveric specimens (10 sides) initially underwent standard SETOA and then extended open-door SETOA (ODETA to the paramedian anterior and middle fossae). The adjunct of hinge-orbitotomy, through three surgical steps and straddling the frontozygomatic suture, converted conventional SETOA to its extended open-door variant. CT scans were performed before dissection and uploaded to the neuronavigation system for quantitative analysis. The angles of attack on the axial plane that addressed four key landmarks, namely the tip of the anterior clinoid process (ACP), foramen rotundum (FR), foramen ovale (FO), and trigeminal impression (TI), were calculated for both operative techniques and compared. RESULTS: Hinge-orbitotomy of the extended open-door SETOA resulted in several surgical, functional, and esthetic advantages: it provided wider axial angles of attack for each of the target points, with a gain angle of 26.68° ± 1.31° for addressing the ACP (p < 0.001), 29.50° ± 2.46° for addressing the FR (p < 0.001), 19.86° ± 1.98° for addressing the FO (p < 0.001), and 17.44° ± 2.21° for addressing the lateral aspect of the TI (p < 0.001), while hiding the skin scar, avoiding temporalis muscle dissection, preserving flap vascularization, and decreasing the rate of bone infection and degree of orbital content retraction. CONCLUSIONS: The extended open-door technique may be specifically suited for selected patients affected by paramedian anterior and middle fossae lesions, with prevalent anteromedial extension toward the anterior clinoid, the foremost compartment of the cavernous sinus and FR and not completely controlled with the pure endoscopic transorbital approach.

The mechanism of visible light-induced C-C cross-coupling by Csp3-H bond activation.

Csp3-C cross-coupling by activating Csp3-H bonds is a dream reaction for the chemical community, and visible light-induced transition metal-catalysis under mild reaction conditions is considered a powerful tool to achieve it. Advancement of this research area is still in its infancy because of the chemical and technical complexity of this catalysis. Mechanistic studies illuminating the operative reaction pathways can rationalize the increasing amount of experimental catalysis data and provide the knowledge allowing faster and rational advances in the field. This goal requires complementary experimental and theoretical mechanistic studies, as each of them is unfit to clarify the operative mechanisms alone. In this tutorial review we summarize representative experimental and computational mechanistic studies, highlighting weaknesses, strengths, and synergies between the two approaches.

Photoexcitation of Distinct Divalent Palladium Complexes in Cross-Coupling Amination Under Air.

The development of metal complexes that function as both photocatalyst and cross-coupling catalyst remains a challenging research topic. So far, progress has been shown in palladium(0) excited-state transition metal catalysis for the construction of carbon-carbon bonds where the oxidative addition of alkyl/aryl halides to zero-valent palladium (Pd0 ) is achievable at room temperature. In contrast, the analogous process with divalent palladium (PdII ) is uphill and endothermic. For the first time, we report that divalent palladium can act as a light-absorbing species that undergoes double excitation to realize carbon-nitrogen (C-N) cross-couplings under air. Differently substituted aryl halides can be applied in the mild, and selective cross-coupling amination using palladium acetate as both photocatalyst and cross-coupling catalyst at room temperature. Density functional theory studies supported by mechanistic investigations provide insight into the reaction mechanism.

Halogen Bonding Initiated Difunctionalization of [1.1.1]Propellane via Photoinduced Polarity Match Additions.

Bicyclo[1.1.1]pentane (BCP), recognized as a bioisostere for para-disubstituted benzene, has gained widespread interest in drug development due to its ability to enhance the physicochemical properties of pharmaceuticals. In this work, we introduce a photoinduced, halogen bonding-initiated, metal-free strategy for synthesizing various BCP derivatives. This method involves the generation of nucleophilic α-aminoalkyl radicals via halogen-bonding adducts. These undergo selective radical addition to [1.1.1]propellane, yielding electrophilic BCP radicals that subsequently participate in polarity-matched additions, culminating in the difunctionalization of bicyclopentane. The versatility and practicality of this metal-free approach are underscored by its broad substrate scope, which includes late-stage functionalization and a series of valuable transformations, all conducted under mild reaction conditions.

Highly Dispersed Pd@ZIF-8 for Photo-Assisted Cross-Couplings and CO2 to Methanol: Activity and Selectivity Insights.

Our study unveils a pioneering methodology that effectively distributes Pd species within a zeolitic imidazolate framework-8 (ZIF-8). We demonstrate that Pd can be encapsulated within ZIF-8 as atomically dispersed Pd species that function as an excited-state transition metal catalyst for promoting carbon-carbon (C-C) cross-couplings at room temperature using visible light as the driving force. Furthermore, the same material can be reduced at 250 °C, forming Pd metal nanoparticles encapsulated in ZIF-8. This catalyst shows high rates and selectivity for carbon dioxide hydrogenation to methanol under industrially relevant conditions (250 °C, 50 bar): 7.46 molmethanol molmetal-1 h-1 and >99%. Our results demonstrate the correlations of the catalyst structure with the performances at experimental and theoretical levels.

Discriminating physiological from non-physiological interfaces in structures of protein complexes: A community-wide study.

Reliably scoring and ranking candidate models of protein complexes and assigning their oligomeric state from the structure of the crystal lattice represent outstanding challenges. A community-wide effort was launched to tackle these challenges. The latest resources on protein complexes and interfaces were exploited to derive a benchmark dataset consisting of 1677 homodimer protein crystal structures, including a balanced mix of physiological and non-physiological complexes. The non-physiological complexes in the benchmark were selected to bury a similar or larger interface area than their physiological counterparts, making it more difficult for scoring functions to differentiate between them. Next, 252 functions for scoring protein-protein interfaces previously developed by 13 groups were collected and evaluated for their ability to discriminate between physiological and non-physiological complexes. A simple consensus score generated using the best performing score of each of the 13 groups, and a cross-validated Random Forest (RF) classifier were created. Both approaches showed excellent performance, with an area under the Receiver Operating Characteristic (ROC) curve of 0.93 and 0.94, respectively, outperforming individual scores developed by different groups. Additionally, AlphaFold2 engines recalled the physiological dimers with significantly higher accuracy than the non-physiological set, lending support to the reliability of our benchmark dataset annotations. Optimizing the combined power of interface scoring functions and evaluating it on challenging benchmark datasets appears to be a promising strategy.

Toward α-1,3/4 fucosyltransferases targeted drug discovery: In silico uncovering of promising natural inhibitors of fucosyltransferase 6.

Sialyl Lewis X (sLex ) antigen is a fucosylated cell-surface glycan that is normally involved in cell-cell interactions. The enhanced expression of sLex on cell surface glycans, which is attributed to the upregulation of fucosyltransferase 6 (FUT6), has been implicated in facilitating metastasis in human colorectal, lung, prostate, and oral cancers. The role that the upregulated FUT6 plays in the progression of tumor to malignancy, with reduced survival rates, makes it a potential target for anticancer drugs. Unfortunately, the lack of experimental structures for FUT6 has hampered the design and development of its inhibitors. In this study, we used in silico techniques to identify potential FUT6 inhibitors. We first modeled the three-dimensional structure of human FUT6 using AlphaFold. Then, we screened the natural compound libraries from the COCONUT database to sort out potential natural products (NPs) with best affinity toward the FUT6 model. As a result of these simulations, we identified three NPs for which we predicted binding affinities and interaction patterns quite similar to those we calculated for two experimentally tested FUT6 inhibitors, that is, fucose mimetic-1 and a GDP-triazole derived compound. We also performed molecular dynamics (MD) simulations for the FUT6 complexes with identified NPs, to investigate their stability. Analysis of the MD simulations showed that the identified NPs establish stable contacts with FUT6 under dynamics conditions. On these grounds, the three screened compounds appear as promising natural alternatives to experimentally tested FUT6 synthetic inhibitors, with expected comparable binding affinity. This envisages good prospects for future experimental validation toward FUT6 inhibition.

Influence of the complete basis set approximation, tight weighted-core, and diffuse functions on the DLPNO-CCSD(T1) atomization energies of neutral H,C,O-compounds.

The impact of complete basis set extrapolation schemes (CBS), diffuse functions, and tight weighted-core functions on enthalpies of formation predicted via the DLPNO-CCSD(T1) reduced Feller-Peterson-Dixon approach has been examined for neutral H,C,O-compounds. All tested three-point (TZ/QZ/5Z) extrapolation schemes result in mean unsigned deviation (MUD) below 2 kJ mol-1 relative to the experiment. The two-point QZ/5Z and TZ/QZ CBS 1 / l max 3 extrapolation schemes are inferior to their inverse power counterpart ( 1 / l max + 1 / 2 4 ) by 1.3 and 4.3 kJ mol-1 . The CBS extrapolated frozen core atomization energies are insensitive (within 1 kJ mol-1 ) to augmentation of the basis set with tight weighted core functions. The core-valence correlation effects converge already at triple-ζ, although double-ζ/triple-ζ CBS extrapolation performs better and is recommended. The effect of diffuse function augmentation converges slowly, and cannot be reproduced with double- ζ or triple- ζ calculations as these are plagued with basis set superposition and incompleteness errors.

Constructing Active BN Sites in Carbon Nanosheets for High-Capacity and Fast Charging Toward Potassium Ion Storage.

Nitrogen doping is an effective strategy to improve potassium ion storage of carbon electrodes via the creation of adsorption sites. However, various undesired defects are often uncontrollably generated during the doping process, limiting doping effect on capacity enhancement and deteriorating the electric conductivity. Herein, boron element is additionally introduced to construct 3D interconnected B, N co-doped carbon nanosheets to remedy these adverse effects. This work demonstrates that boron incorporation preferentially converts pyrrolic N species into BN sites with lower adsorption energy barrier, further enhancing the capacity of B, N co-doped carbon. Meanwhile, the electric conductivity is modulated via the conjugation effect between the electron-rich N and electron-deficient B, accelerating the charge-transfer kinetics of potassium ions. The optimized samples deliver a high specific capacity, high rate capability, and long-term cyclic stability (532.1 mAh g-1 at 0.05 A g-1 , 162.6 mAh g-1 at 2 A g-1 over 8000 cycles). Furthermore, hybrid capacitors using the B, N co-doped carbon anode deliver a high energy and power density with excellent cycle life. This study demonstrates a promising approach using BN sites for adsorptive capacity and electric conductivity enhancement in carbon materials for electrochemical energy storage applications.

Merging Rh-Catalyzed C-H Functionalization and Cascade Cyclization to Enable Propargylic Alcohols as Three-Carbon Synthons.

Reported herein is a reactivity of propargyl alcohols as "Three-Carbon Synthons" in a Rh(III)-catalyzed C-H functionalization of acetanilides, leading to the synthesis of core structures of isocryptolepine, γ-carbolines, dihydrochromeno[2,3-b]indoles, and diindolylmethanes (DIM) derivatives. The transformation involves a rhodium(III)-catalyzed C-H functionalization and heteroannulation to yield indoles followed by a cascade cyclization with both external and internal nucleophiles to afford diverse products. The role of the hydroxy group, the key function of the silver additive, the origin of the reverse regioselectivity and the rate-determining step, are rationalized in conformity with the combination of experimental, noncovalent interaction analysis and DFT studies. This protocol is endowed with several salient features, including one-pot multistep cascade approach, exclusive regioselectivity, good functional group tolerance and synthesis of variety of molecular frameworks.

PtII -N-Heterocyclic Carbene Complexes in Solvent-Free Alkene Hydrosilylation.

Herein, we report the catalytic activity of a series of platinum(II) pre-catalysts, bearing N-heterocyclic carbene (NHC) ligands, in the alkene hydrosilylation reaction. Their structural and electronic properties are fully investigated using X-ray diffraction analysis and nuclear magnetic resonance spectroscopy (NMR). Next, our study presents a structure-activity relationship within this group of pre-catalysts and gives mechanistic insights into the catalyst activation step. An exceptional catalytic performance of one of the complexes is observed, reaching a turnover number (TON) of 970 000 and a turnover frequency (TOF) of 40 417 h-1 at 1 ppm catalyst loading. Finally, an attractive solvent-free and open-to-air alkene hydrosilylation protocol, featuring efficient platinum removal (reduction of residual Pt from 582 ppm to 5.8 ppm), is disclosed.