Repeatability of the modified Thorington card used to measure far heterophoria.

PURPOSE: To determine the interexaminer and intraexaminer repeatability of the modified Thorington test (TH) for distance vision in young adults and to compare these results with those observed for the heterophoria tests most commonly used in clinical practice. Agreement among tests was also assessed. METHODS: Distance heterophoria was quantified on two separate occasions by two examiners in 110 subjects aged 18 to 32 years (mean, 19.74 years; SD, 2.5 years) using four different tests: cover test (CT) Von Graefe, Maddox rod, and modified TH. The repeatability of the tests and agreement between them was estimated by the Bland and Altman method whereby the mean difference and the 95% limits of agreement were determined as the coefficient of repeatability (COR) and coefficient of agreement. RESULTS: The Thorington test showed best interexaminer repeatability (COR = ±1.43Δ), followed closely by CT (COR = ±1.65Δ), whereas best intraexaminer repeatability was observed for CT (COR = ±1.28Δ) followed by TH (COR = ±1.51Δ). Among the different combinations of tests, TH and CT showed best agreement indicated by the lowest coefficient of agreement (±2.23Δ) and a low mean difference (-0.63Δ) between measurements. CONCLUSIONS: Good interexaminer and intraexaminer repeatability was observed for both TH and CT, and agreement between the two tests was also good. Given the simple administration of the TH, we recommend its clinical use to quantify distance horizontal heterophoria.

In-House 3D Printed Positioning and Cutting Guide System for Mandibular Reconstruction. Protocol and case report.

Maxillofacial surgery planning has been improved by technological advances in 3D printing. The use of customized cutting and positioning guides allows intraoperative reproduction of pre-planned osteotomy cuts, resulting in increased surgical accuracy, reduced surgical time and improved esthetic and functional outcomes. Our paper presents a new method for creating and printing in-house cutting and positioning guides. A computer program (Brainlab iPlan) was used to segment the mandible for three-dimensional planning from imported conventional computed tomography (CT) scans. The virtual model of the mandible was printed on a stereolithography (SLA) 3D printer and a reconstruction plate was adapted to the printed model. The surface of the model and the screw-retained plate was scanned using a structured light surface 3D scanner (Artec Eva). The obtained scan of the jaw and plate in position was processed and transformed into an STL file. Free software (Autodesk Meshmixer) superimposes the initial jaw on the scanned jaw with the plate, designing a customized hybrid cutting guide that allows accurate intraoperative positioning, knowing the exact position of the reconstruction plate screws in the jaw. The total design, fabrication and 3D printing time for the in-house hybrid guide was 595 min. The average total printing cost was EUR 16. We found the technique to be simple and repeatable. We present and describe here a novel and simple technique for in-house 3D printed positioning and cutting guide system which can be applied to overall maxillofacial area. In cases of mandibular reconstruction, this protocol guarantees an adequate esthetic and functional result. Key words:Oral cancer, 3D surgery, CAD/CAM, personalized medicine, surgical guides, in house.

Clinical Outcomes and Cost Analysis of Fibula Free Flaps: A Retrospective Comparison of CAD/CAM versus Conventional Technique.

(1) Background: A decrease in operative time can not only improve patient outcomes through a reduction in the risk of developing complications but can also result in cost savings. The aim of this study is to determine whether there an intraoperative time gain can be achieved by using the preoperative virtual planning of mandibular reconstruction using a free fibula flap compared with freehand plate bending and osteotomies. (2) Methods: A retrospective comparative study was carried out in the Oral and Maxillofacial Department of La Paz University Hospital, Madrid, Spain. The study compared 18 patients in the CAD/CAM group with 19 patients in the conventional freehand group. A comparison was made between the total surgical time, the comorbidities, and the hospital stay. The resource consumption was estimated using a cost analysis. (3) Results: Although CAD/CAM was a statistically more expensive procedure in the perioperative phase, no significant differences were observed in total health care costs between the two groups. There was a non-significant trend towards an increase in complications with conventional reconstruction plates compared to patient-specific plates (PSI). (4) Conclusions: CAD/CAM technology and a 3D printed cutting guide offer a significantly shorter surgical time, which is associated with a reduction in hospital days, PACU days, and complications. The cost of CAD/CAM technology is comparable to that of the conventional freehand technique.

Impact of Goal Directed Therapy in Head and Neck Oncological Surgery with Microsurgical Reconstruction: Free Flap Viability and Complications.

(1) Background: Surgical outcomes in free flap reconstruction of head and neck defects in cancer patients have improved steadily in recent years; however, correct anaesthesia management is also important. The aim of this study has been to show whether goal directed therapy can improve flap viability and morbidity and mortality in surgical patients. (2) Methods: we performed an observational case control study to analyse the impact of introducing a semi invasive device (Flo Trac®) during anaesthesia management to optimize fluid management. Patients were divided into two groups: one received goal directed therapy (GDT group) and the other conventional fluid management (CFM group). Our objective was to compare surgical outcomes, complications, fluid management, and length of stay between groups. (3) Results: We recruited 140 patients. There were no differences between groups in terms of demographic data. Statistically significant differences were observed in colloid infusion (GDT 53.1% vs. CFM 74.1%, p = 0.023) and also in intraoperative and postoperative infusion of crystalloids (CFM 5.72 (4.2, 6.98) vs. GDT 3.04 (2.29, 4.11), p < 0.001), which reached statistical significance. Vasopressor infusion in the operating room (CFM 25.5% vs. GDT 74.5%, p < 0.001) and during the first postoperative 24h (CFM 40.6% vs. GDT 75%, p > 0.001) also differed. Differences were also found in length of stay in the intensive care unit (hours: CFM 58.5 (40, 110) vs. GDT 40.5 (36, 64.5), p = 0.005) and in the hospital (days: CFM 15.5 (12, 26) vs. GDT 12 (10, 19), p = 0.009). We found differences in free flap necrosis rate (CMF 37.1% vs. GDT 13.6%, p = 0.003). One-year survival did not differ between groups (CFM 95.6% vs. GDT 86.8%, p = 0.08). (4) Conclusions: Goal directed therapy in oncological head and neck surgery improves outcomes in free flap reconstruction and also reduces length of stay in the hospital and intensive care unit, with their corresponding costs. It also appears to reduce morbidity, although these differences were not significant. Our results have shown that optimizing intraoperative fluid therapy improves postoperative morbidity and mortality.

The Impact of Healthcare-Associated Infections in Patients Undergoing Oncological Microvascular Head and Neck Reconstruction: A Prospective Multicentre Study.

(1) Background: Healthcare-associated infections (HAIs) after head and neck free-flap reconstruction are a common postoperative complication. Risk factors for HAIs in this context and their consequences have not been adequately described. (2) Methods: Ongoing prospective multicentre study between 02/2019 and 12/2020. Demographic characteristics and outcomes were analysed, focusing on infections. (3) Results: Forty out of 65 patients (61.54%) suffered HAIs (surgical site infection: 52.18%, nosocomial pneumonia: 23.20%, bloodstream infection: 13% and urinary tract infection: 5.80%). Methicillin-resistant Staphylococcus aureus (MRSA) and resistant Pseudomonas aeruginosa, Klebsiella pneumoniae and Enterobacter cloacae were the most frequently implicated. The significant risk factors for infection were: previous radiotherapy (Odds ratio (OR): 5.42; 95% confidence interval (CI), 1.39-21.10), anaemia (OR: 8.00; 95% CI, 0.96-66.95), salvage surgery (eight out of eight patients), tracheostomy (OR: 2.86; 95% CI, 1.01-8.14), surgery duration (OR: 1.01; 95% CI, 1.00-1.02), microvascular reoperation <72 h (eight/eight) and flap loss (eight/eight). The major surgical complications were: a need to reoperate (OR: 6.89; 95% CI, 1.42-33.51), prolonged hospital admission (OR: 1.16; 95% CI, 1.06-1.27) and delay in the initiation of postoperative radiotherapy (OR: 9.07; 95% CI, 1.72-47.67). The sixth month mortality rate in patients with HAIs was 7.69% vs. 0% in patients without HAIs (p = 0.50). (4) Conclusions: HAIs were common after this type of surgery, many of them caused by resistant microorganisms. Some modifiable risk factors were identified. Infections played a role in cancer prognosis by delaying adjuvant therapy.

Oral manifestations of ellis-van creveld syndrome. A rare case report.

Ellis-van Creveld syndrome (EVC) or chondroectodermal dysplasia is an autosomal recessive disorder, characterized by dwarfism, polydactyly, hypoplastic fingernails and congenital heart defects, finding in most of the cases orofacial anomalies. We describe a clinical case of a 9 year old male patient diagnosed with EVC who visited our Maxillofacial private consultation at Alcorcon Southern Hospital, presenting typical oral manifestations such as dental agenesis, delayed eruption, hypoplasia of the enamel, dental dysmorphism, taurodontism and supernumerary teeth. EVC syndrome is a rare disease and requires a multidisciplinary approach. Oral features are constant and requires the jointly performance of Odontologist and Maxillofacial surgeon aiming to get an appropriate treatment sequence surgery-orthodontics in order to achieve a suitable functional result to improve the quality of life of these patients. Key words:Ellis-Van creveld syndrome, chondroectodermal dysplasia, oral manifestations, craniofacial manifestations.

Management of atrophic maxilla in severe osteoporosis treated with bisphosphonates: a case report.

Studies investigating whether osteoporosis is a risk factor for using implants have revealed no correlation between possible implant failure and the severity of osteoporosis. However, osteoporotic patients frequently require bone regeneration techniques, because they do not fulfil optimum conditions for implant placement owing to the diminished bone structure and rapid resorption of the alveolar bone. We present a successful case of advanced implant therapy using platelet-rich plasma in a patient with severe osteoporosis who had been previously treated with bisphosphonates. We are not aware that this technique has been previously described in literature.