Advances in uremic toxin detection and monitoring in the management of chronic kidney disease progression to end-stage renal disease.

Patients with end-stage kidney disease (ESKD) rely on dialysis to remove toxins and stay alive. However, hemodialysis alone is insufficient to completely remove all/major uremic toxins, resulting in the accumulation of specific toxins over time. The complexity of uremic toxins and their varying clearance rates across different dialysis modalities poses significant challenges, and innovative approaches such as microfluidics, biomarker discovery, and point-of-care testing are being investigated. This review explores recent advances in the qualitative and quantitative analysis of uremic toxins and highlights the use of innovative methods, particularly label-mediated and label-free surface-enhanced Raman spectroscopy, primarily for qualitative detection. The ability to analyze uremic toxins can optimize hemodialysis settings for more efficient toxin removal. Integration of multiple omics disciplines will also help identify biomarkers and understand the pathogenesis of ESKD, provide deeper understanding of uremic toxin profiling, and offer insights for improving hemodialysis programs. This review also highlights the importance of early detection and improved understanding of chronic kidney disease to improve patient outcomes.

Precise Tuning and Characterization of Viscoelastic Interfaces for the Study of Early Epithelial-Mesenchymal Transition Behaviors.

There is growing evidence that cellular functions are regulated by the viscoelastic nature of surrounding matrices. This study aimed to investigate the impact of interfacial viscoelasticity on adhesion and epithelial-mesenchymal transition (EMT) behaviors of epithelial cells. The interfacial viscoelasticity was manipulated using spin-coated thin films composed of copolymers of ε-caprolactone and d,l-lactide photo-cross-linked with benzophenone, whose mechanical properties were characterized using atomic force microscopy and a rheometer. The critical range for the morphological transition of epithelial Madin-Darby canine kidney (MDCK) cells was of the order of 102 ms relaxation time, which was 1-2 orders of magnitude smaller than the relaxation times reported (10-102 s). An analysis of strain rate-dependent viscoelastic properties revealed that the difference was caused by the different strain rate/frequency used for the mechanical characterization of the interface and bulk. Furthermore, decoupling of the interfacial viscous and elastic terms demonstrated that E/N-cadherin expression levels were regulated differently by interfacial relaxation and elasticity. These results confirm the significance of precise manipulation and characterization of interfacial viscoelasticity in mechanobiology studies on EMT progression.

Modulation of Mesenchymal Stem Cells Mechanosensing at Fluid Interfaces by Tailored Self-Assembled Protein Monolayers.

Mechanical cues of cellular microenvironments can modulate cell functions including cell spreading and differentiation. Most studies of cellular functions are performed using a solid substrate, and it is thought that cells cannot spread on fluid substrates because of rapid relaxation, which cannot resist against actomyosin-based cell contractility. Here, the spreading and growth of anchorage-dependent cells such as human mesenchymal stem cells at the liquid interface between a perfluorocarbon fluid and the culture medium are observed. It is demonstrated that a monomolecular protein nanosheet self-assembled at a fluid interface is sufficiently rigid to support cell spreading without additional treatment. Fine tuning of the packing of these proteins at the liquid interface permits tailoring of the mechanics of the protein layer, ultimately allowing for the regulation of cell spreading. The greater stiffness of the protein nanosheets triggers cell spreading, adhesion growth, and yes-associated protein nuclear translocation. Cell behavior at the fluid interface is explained within the framework of the molecular clutch model. In addition, the freestanding ultrathin protein nanosheets are extremely flexible, easily deformed, and perceived by cells as being much softer. The findings are expected to provide a new perspective for insights into cell-material interactions.

Photoactivatable Hydrogel Interfaces for Resolving the Interplay of Chemical, Mechanical, and Geometrical Regulation of Collective Cell Migration.

Collective migration is the mechanobiological interplay within migrating cell clusters and against extracellular matrixes (ECMs) underneath, mediating various physiological and pathological processes. Therefore, it is crucial to develop a robust platform on which collective migration can be studied under standardized conditions to understand how cells migrate differently between normal and disease states. We herein demonstrated phtotoactivatable hydrogel interfaces as suitable candidates for such applications. The substrate was composed of a poly(acrylamide) (PAAm) hydrogel whose surface was sequentially functionalized with poly-d-lysine (PDL) and photocleavable poly(ethylene glycol) (PEG). On the surface of the gel substrates, cell clusters with any given geometries can be prepared by controlling the irradiation patterns (geometrical cue), and their collective migration can be induced by the subsequent irradiation of the surrounding regions. Moreover, the substrate mechanical properties can be controlled by changing the composition of the PAAm hydrogel (mechanical cue), and the chemical properties were controlled by changing the amount of immobilized PDL, thereby altering the adsorbed amount of ECM proteins (chemical cue). The photoactivatable gel substrates were characterized by fluorescence microscopy, ζ-potential measurements, and the protein adsorption test. Through the study of the interplay of chemical, mechanical, and geometrical cues in the regulation of collective characteristics, we found additive effects of chemical and mechanical cues on the suppression of circular expansion by up-regulating the epithelial morphology. Also, the impact of geometrical cues became more significant by decreasing the chemical cue. We believe the present platform will be a useful research tool for the comprehensive mechanobiological analysis of collective cell migration.

Evaluation of Three Sample Introduction Systems for Impurity Analysis of an Ultrapure Reagent Using a Scanning Mobility Particle Sizer.

The semiconductor industry continues to shrink the device sizes while applying more complex shapes and using diverse materials, which requires parallel improvements in the quality of ultrapure reagents. The need for ultrapure reagents has led to ever-higher demands for the performance of analytical instruments used to detect ultratrace impurities. In this study, nonvolatile impurities in ultrapure reagents were quantified using a scanning mobility particle sizer (SMPS). The performances of three different sample introduction systems, i.e., an electrospray (ES), an aerosol generator with a heating chamber and a Nafion desolvation membrane (NB-II), and a MicroMist nebulizer with a heated cyclonic spray chamber and a three-stage Peltier-cooled desolvation system (MM-APEX), were evaluated for the lower limit of detection of a SMPS. The MM-APEX equipped with the SMPS was able to detect NaCl additives at a concentration of 100 parts per trillion (ppt, ng/L) in ultrapure water, which was approximately 104- and 102-fold lower than those of ES and NB-II, respectively. The practical application of MM-APEX with the SMPS for commercial isopropanol samples was also studied. The results clearly demonstrate that the impurity concentrations presented by the NaCl-equivalent concentrations among different sources of isopropanol were at the ppt to parts-to-billion (ppb) scale. The SMPS system equipped with MM-APEX is capable of recognizing impurities with concentrations ranging from tens ppt to thousands of parts per million (ppm), which is beneficial for an ultratrace analysis of nonvolatile impurities in semiconductor process chemicals.

Viscoelastically tunable substrates elucidate the interface-relaxation-dependent adhesion and assembly behaviors of epithelial cells.

Recent progress in mechanobiology sheds light on the regulation of cellular phenotypes by dissipative property of matrices, i.e., viscosity, fluidity, and stress relaxation, in addition to extensively studied elasticity. However, most researches have focused on bulk mechanics, despite cells in 2D culture can only interact with matrix interface directly. Here, we studied the impact of interfacial viscosity as well as elasticity of substrates on the early stage of adhesion behaviors of epithelial cells through new material design and mechanical characterization. The materials are copolymers of ε-caprolactone and d,l-lactide photocrosslinked by benzophenone. The substrate viscoelasticity changes depending on the polymer molecular weight and irradiation time. The interfacial elasticity and relaxation were determined by atomic force microscopy with modes of nanoindentation and tip-dwelling, respectively. MDCK cells changed morphologically, ranging from loose beaded assembly to more compact spheroids and eventual spread monolayer clusters, in response to the interfacial viscoelasticity change. Such morphological changes were mainly determined by substrate interfacial relaxation, rather than interfacial elasticity. Single-cell tracking identified biphasic motility with the minimum speed at intermediate relaxation time (~350 ms), where cells showed transitional morphologies between epithelial and mesenchymal traits. In that relaxation level, partially deformed cells moved around to coalesce with surrounding cells, eventually assembling into compact cellular aggregates. These results highlight, unlike the conventional hanging-drop technique, an appropriate level of interfacial relaxation is critical for efficient cell aggregate maturation on adhesive viscoelastic matrices. This work not only elucidates that the interfacial relaxation as the essential mechanical parameter for epithelial cell adhesion and migration, but also gives useful tips for creating physiologically relevant drug screening platform.

Measurements of an Effective Longitudinal Coherence Length in Transmission Small Angle X-ray Scatterings.

The notion of an effective longitudinal coherence length with its value much greater than λ2/(2Δλ) has been adopted in small-angle X-ray scattering communities for years, where λ and Δλ denote the incident wavelength and its spread, respectively. Often the implications of the effective longitudinal coherence length do not even enter considerations in the designing and data treatment of small-angle scattering experiments. In this work, conventional transmission small-angle X-ray scattering (tSAXS) was performed to reveal a clear angular dependence on effective longitudinal coherence length. The measured values of effective longitudinal coherence length can be as high as one millimeter, whereas the value of calculated λ2/(2Δλ) is in nanometers.

Adaptive Liquid Interfacially Assembled Protein Nanosheets for Guiding Mesenchymal Stem Cell Fate.

There is a growing interest in the development of dynamic adaptive biomaterials for regulation of cellular functions. However, existing materials are limited to two-state switching of the presentation and removal of cell-adhesive bioactive motifs that cannot emulate the native extracellular matrix (ECM) in vivo with continuously adjustable characteristics. Here, tunable adaptive materials composed of a protein monolayer assembled at a liquid-liquid interface are demonstrated, which adapt dynamically to cell traction forces. An ultrastructure transition from protein monolayer to hierarchical fiber occurs through interfacial jamming. Elongated fibronectin fibers promote formation of elongated focal adhesion structures, increase focal adhesion kinase activation, and enhance neuronal differentiation of stem cells. Cell traction force results in spatial rearrangement of ECM proteins, which feeds back to alter stem cell fate. The reported biomimetic adaptive liquid interface enables dynamic control of stem cell behavior and has potential translational applications.

Identification of Characteristic Macromolecules of Escherichia coli Genotypes by Atomic Force Microscope Nanoscale Mechanical Mapping.

The categorization of microbial strains is conventionally based on the molecular method, and seldom are the morphological characteristics in the bacterial strains studied. In this research, we revealed the macromolecular structures of the bacterial surface via AFM mechanical mapping, whose resolution was not only determined by the nanoscale tip size but also the mechanical properties of the specimen. This technique enabled the nanoscale study of membranous structures of microbial strains with simple specimen preparation and flexible working environments, which overcame the multiple restrictions in electron microscopy and label-enable biochemical analytical methods. The characteristic macromolecules located among cellular surface were considered as surface layer proteins and were found to be specific to the Escherichia coli genotypes, from which the averaged molecular sizes were characterized with diameters ranging from 38 to 66 nm, and the molecular shapes were kidney-like or round. In conclusion, the surface macromolecular structures have unique characteristics that link to the E. coli genotype, which suggests that the genomic effects on cellular morphologies can be rapidly identified using AFM mechanical mapping. Graphical Abstract Quantification of surface macromolecules of E. coli cells using AFM mechanical mapping. Surface macromolecules of cellular surface of three E. coli genotypes, MG1655, CFT073, and RS218, were characterized with the sizes ranging from 38 to 66 nm and with round or kidney-like shapes. The topography images were colored with adhesion mapping with the scale bars = 200 nm.