RESUMEN
In optical nanostructures used as artificial resonance-based color filters, there is unfortunate universal trade-off between spectral sharpness and angular tolerance as well as maximum extinction. We rigorously derive the maximum performance bounds of wavelength-rejection filters realized by single-layer plasmonic metasurfaces with a dominant resonance and weak near-field coupling, and propose a multi-layer approach to overcome these single-layer limits and trade-offs. We also present a realistic example that has a narrow full-width-at-half-maximum bandwidth of 24 nm with 10 dB extinction at 532 nm with good angular tolerance up to 60°. The performance of the proposed metasurface is close to the general theoretical bound.
RESUMEN
The mode orthogonality fundamentally influences the scattering spectra of multi-resonance systems, such as plasmonic color filters. We show that planar arrays of silver nanostructures with dual localized surface plasmon resonances and the right mode orthogonality can function as transmissive RGB color filters with peak transmittances higher than 70%, and color gamut areas larger than 90% of the sRGB space. These are the brightest and most saturated of all designs proposed thus far. We present the Pareto frontier from designs with more than 80% peak transmittance, to designs that achieve a color gamut larger than 120% of the sRGB space.
RESUMEN
Recent advances in metasurfaces and optical nanostructures have enabled complex control of incident light with optically thin devices. However, it has thus far been unclear whether it is possible to achieve complete linear control of coherent light transmission, that is, independent control of polarization, amplitude, and phase for both input polarization states, with just a single, thin nanostructure array. Here, it is proved possible, and a universal metasurface is proposed, a bilayer array of high-index elliptic cylinders that possesses a complete degree of optical freedom with fully designable chirality and anisotropy. The completeness of achievable light control is mathematically shown with corresponding Jones matrices, new types of 3D holographic schemes that were formerly impossible are experimentally demonstrated, and a systematic way of realizing any input-state-sensitive vector linear optical device is presented. The results unlock previously inaccessible degrees of freedom in light transmission control.
RESUMEN
Transparent conducting electrodes (TCEs) are essential components in various optoelectronic devices. Nanostructured metallic thin film is one of the promising candidates to complement current metal oxide films, such as ITO, where high cost rare earth elements have been a longstanding issue. Herein, we present that multiscale porous metal nanomesh thin films prepared by bimodal self-assembly of block copolymer (BCP)/homopolymer blends may offer a new opportunity for TCE. This hierarchical concurrent self-assembly consists of macrophase separation between BCP and homopolymer as well as microphase separation of BCP, and thus provides a straightforward spontaneous production of a highly porous multiscale pattern over an arbitrary large area. Employing a conventional pattern transfer process, we successfully demonstrated a multiscale highly porous metallic thin film with reasonable optical transparency, electro-conductance, and large-area uniformity, taking advantage of low loss light penetration through microscale pores and significant suppression of light reflection at the nanoporous structures. This well-defined controllable bimodal self-assembly can offer valuable opportunities for many different applications, including optoelectronics, energy harvesting, and membranes.
RESUMEN
The refractive index is the fundamental property of all optical materials and dictates Snell's law, propagation speed, wavelength, diffraction, energy density, absorption and emission of light in materials. Experimentally realized broadband refractive indices remain <40, even with intricately designed artificial media. Herein, we demonstrate a measured index >1,800 resulting from a mesoscopic crystal with a dielectric constant greater than three million. This gigantic enhancement effect originates from the space-filling curve concept from mathematics. The principle is inherently very broad band, the enhancement being nearly constant from zero up to the frequency of interest. This broadband giant-refractive-index medium promises not only enhanced resolution in imaging and raised fundamental absorption limits in solar energy devices, but also compact, power-efficient components for optical communication and increased performance in many other applications.
RESUMEN
The refractive index of natural transparent materials is limited to 2-3 throughout the visible wavelength range. Wider controllability of the refractive index is desired for novel optical applications such as nanoimaging and integrated photonics. We report that metamaterials consisting of period and symmetry-tunable self-assembled nanopatterns can provide a controllable refractive index medium for a broad wavelength range, including the visible region. Our approach exploits the independent control of permeability and permittivity with nanoscale objects smaller than the skin depth. The precise manipulation of the interobject distance in block copolymer nanopatterns via pattern shrinkage increased the effective refractive index up to 5.10. The effective refractive index remains above 3.0 over more than 1,000 nm wavelength bandwidth. Spatially graded and anisotropic refractive indices are also obtained with the design of transitional and rotational symmetry modification.
RESUMEN
Localized surface plasmon resonance of metallic nanostructures receives noticeable attention in photonics, electronics, catalysis, and so on. Core-shell nanostructures are particularly attractive due to the versatile tunability of plasmonic properties along with the independent control of core size, shell thickness, and corresponding chemical composition, but they commonly suffer from difficult synthetic procedures. We present a reliable and controllable route to a highly ordered uniform Au@Ag core-shell nanoparticle array via block copolymer lithography and subsequent seeded-shell growth. Size-tunable monodisperse Au nanodot arrays are generated by block copolymer self-assembly and are used as seed layers to grow Ag shells with variable thickness. The resultant Au@Ag core-shell nanoparticle arrays exhibit widely tunable broadband enhancement of plasmonic resonance, greatly surpassing single-element nanoparticle or homogeneous alloy nanoparticle arrays. Surface-enhanced Raman scattering of the core-shell nanoparticle arrays showed an enhancement factor greater than 270 from Au nanoparticle arrays.