Valuating the efficiency of social security and healthcare in OECD countries from a sustainable development.

Under the goal of sustainable development, coping with the increase in social security and healthcare expenses caused by population aging is becoming increasingly important, but it is rare in the literature to evaluate the impact of social security efficiency on healthcare efficiency. This research uses the dynamic SBM two-stage model to observe the efficiencies of social security and healthcare in OECD countries. There are two findings as follows. First, the higher social security efficiency is, the better is the healthcare efficiency of countries with lower per capita GDP. Second, higher social security efficiency of National Health Service (NHS) countries denote better healthcare efficiency. When the financial source of the social security system is taxation, then it is more likely to bring higher efficiency to healthcare.

Coupling Single Atoms to a Nanophotonic Whispering-Gallery-Mode Resonator via Optical Guiding.

We demonstrate an efficient optical guiding technique for coupling cold atoms in the near field of a planar nanophotonic circuit, and realize large atom-photon coupling to a whispering-gallery mode in a microring resonator with a single-atom cooperativity C≳8. The guiding potential is created by diffracted light on a nanophotonic waveguide that smoothly connects to a dipole trap in the far field for atom guiding with subwavelength precision. We observe atom-induced transparency for light coupled to a microring, characterize the atom-photon coupling rate, extract guided atom flux, and demonstrate on-chip photon routing by single atoms. Our demonstration promises new applications with cold atoms on a nanophotonic circuit for chiral quantum optics and quantum technologies.

Realization of efficient 3D tapered waveguide-to-fiber couplers on a nanophotonic circuit.

We report the realization of efficiently coupled 3D tapered waveguide-to-fiber couplers (TWCs) based on standard lithography techniques. The 3D TWC design is capable of achieving highly efficient flat-cleaved fiber to silicon nitride photonic waveguide coupling, with T ≈ 95 % polarization-insensitive coupling efficiency, wide bandwidth, and good misalignment tolerance. Our fabricated 3D TWCs on a functional nanophotonic circuit achieve T ≈ 85% coupling efficiency. Beyond applications in high-efficiency photon coupling, the demonstrated 3D lithography technique provides a complementary approach for mode field shaping and effective refractive index engineering, potentially useful for general applications in integrated photonic circuits.

Sustainability efficiency of climate change and global disasters based on greenhouse gas emissions from the parallel production sectors - A modified dynamic parallel three-stage network DEA model.

This study employed dynamic three-stage network data envelopment analysis (DEA), considering parallel production in the agricultural and industrial sectors, to assess the impact of greenhouse gas emissions on the climate change and natural disaster stages. The results revealed the following: (1) The dynamic overall efficiencies of more countries are decreasing than are increasing. The seven countries with the poorest overall efficiency ranking (Myanmar, Vietnam, Thailand, Bangladesh, the Philippines, Pakistan, and India) are mostly located in Southeast Asia. (2) The number of countries that maintained low efficiency over the long term is greater than those that retained high efficiency over the long term. Myanmar, Mexico, India, the Philippines, Thailand, and Vietnam maintained efficiency scores below 0.5, whereas South Korea, Japan, China, and New Zealand maintained efficiency scores above 0.8. (3) More than one-third of countries exhibited declines in efficiency over time, and half were European countries. Less than one-third of countries maintained their efficiency, and less than one-third of countries gradually improved. (4) Approximately half of the countries' efficiency scores were lower than the global average. The efficiency scores of the industrial sector exhibited a greater room for improvement on the input factors than did those of the agricultural sector. (5) Total factor energy efficiency analysis revealed that methane emissions and CO2 emissions have a similar level but large room for improvement across countries. Improving input factors in the production stage can ultimately mitigate inefficiencies in the climate change and natural disaster stages. There are still other important factors related to climate change, such as sea surface temperature, forest areas, or air pollution indicators, that could be considered in future research. The occurrence of global disasters could also be discussed in groups according to the region where the countries are located in the future.

Policy choices for China to reduce carbon emissions in coping with extreme weather: Applying a dynamic two-stage undesirable non-radial directional distance function.

China is the world's largest carbon emitter and also one of many countries most affected by extreme weather. Although its government has set carbon reduction targets, the public has not established a connection between carbon reduction and coping with extreme weather. This study aims to help establish the above connection and applies a dynamic two-stage undesirable non-radial directional distance function to evaluate energy performance in the first stage while establishing CO2 emissions as a link to evaluate coping with extreme weather performance in the second stage. From empirical results, the average efficiency of 30 provinces in China in coping with extreme weather from 2011 to 2020 is only 0.484, or far lower than the energy efficiency value of 0.709. Based on the differences in performance between the two stages and the changing trends in the room for improvement of CO2 emissions, this study proposes policy options to promote the participation of the entire society in the emission reduction process.

The influence of climate change on the allocation efficiency of new and tradition energy.

The purpose of this paper is to strengthen research concerning the impact of climate change on China's water resources, in order to avoid extreme weather events such as regional rainstorms and floods affecting the stable supply of energy and electricity. The goal is to reorganize energy industry allocation to make China's energy the most efficient, which would thus help achieve sustainable development goals. The biggest contribution and of this paper is not only to enlarge the scale and take into account the sustainable aspects, but also to consider climate change factors that have been ignored in the past as exogenous variables. For the first time, we take stock of the optimal allocation of new and tradition energy sources and carbon dioxide. This study uses the Dynamic ZSG-DDF model with exogenous variables and undesirable outputs to find a way to redistribute carbon dioxide, new energy, and tradition energy from different provinces on the premise of maximizing efficiency, thus achieving the goal of reducing carbon and saving the earth. The research results show that the energy efficiency of tradition energy is higher than that of new energy in various provinces. At the same time, the China government must comprehensively review the quota targets of new energy, tradition energy, and carbon dioxide (CO2) in each province as quickly as possible. Currently, the quotas of various provinces are seriously misplaced, and 26 provinces in total have great room for improvement.

Energy performance of European countries by considering the role of forest.

This paper applies the modified undesirable dynamic data envelopment analysis (DEA) model by considering the role of forest carbon sinks to evaluate European countries' carbon dioxide (CO2) emissions and productivity efficiency. Taking population and energy consumption as input variables, gross domestic product (GDP) as the desirable input, CO2 as the undesirable output, and fixed assets as an inter-temporal carry-out input variable, our results suggest considering the fixed amount of the forest carbon sinks significantly affects efficiency rankings. The overall efficiency rankings for Ireland, Austria, Italy, Germany, Spain, and Belgium look to be overrated, while those of Finland, France, and Netherlands are apparently underrated. In terms of Total-Factor Efficiency analysis, countries with the best performance in efficiency ranking are Denmark, Luxembourg, Norway, Sweden, and the UK, thanks to their long-term effort at addressing the impact of forest carbon sinks and the effect of CO2 emissions on efficiency.

Air Pollution's Impact on the Economic, Social, Medical, and Industrial Injury Environments in China.

In this era of rapid economic development, it is inevitable that economic activities eventually cause serious damage to the environment's air quality, making it the focus of global public health. If the treatment efficiency of medical accidents can be improved, then this can significantly stabilize society and improve production efficiency. Past research has mainly focused on work safety and health issues, seldom discussing economic, social, medical, and environmental pollution issues together, and, most generally, adopted static methods that fail to recognize how air pollution affects the overall economy, society, medical care, and external environment. In order to more deeply understand the changes among social, economic activities, and environmental issues due to air pollution, this study proposes a meta-two-stage undesirable dynamic DDF (Direction Distance Function) that, under an exogenous model, divides the 30 provinces of China into high-income regions and middle-income regions and explores the economic, social, medical, and environmental efficiencies between the two areas to resolve the lack of related static analyses. The empirical results are as follows. (1) The AQI (air quality index) significantly impacts the efficiency of medical injuries in various regions. (2) When the AQI is considered, the medical insurance expenditure efficiency score value of high-income areas is lower than the value without the AQI. (3) When the AQI is considered, the efficiency value of the number of work injury insurance benefits in the middle-income area is lower than the efficiency value without the AQI.

Dynamic Linkages Among Energy Consumption, Environment and Health Sustainability: Evidence from the Different Income Level Countries.

Environment pollution was closely related to human health. The energy consumption is one of the important sources of environmental pollution in the development of economy. This paper used undesirable two-stage meta-frontier DDF (distance difference function) data envelopment analysis model to explore the impact of environment pollutants from energy consumption on the mortality of children and the aged, survival rate of 65 years old and health expenditure efficiency in 27 high income countries, 21 upper middle income countries, and 16 lower middle income countries from 2010 to 2014. High income countries had higher efficiency of energy and health than middle income countries in general. But whether in high income or middle income countries, the efficiency of non-renewable energy is higher than renewable energy. There was much room for both high income countries and middle income countries to improve renewable energy efficiency. Besides, middle income countries need to improve the efficiency of non-renewable energy and reduce pollutant emissions per unit of GDP. In terms of health efficiency, upper middle income countries performed worse than lower income countries. This phenomenon might indicate there was a U-shaped relationship between health efficiency and income level. Upper income countries should pay more attention to the environmental and health problems and cross the U-shaped turning point. The contribution of this article was to consider the heterogeneous performance of energy efficiency, environmental efficiency, and health efficiency under the influence of income level differences, and found that there might be a U-shaped relationship between health efficiency and income level.

The Impact of the Media and Environmental Pollution on the Economy and Health Using a Modified Meta 2-Stage EBM Malmquist Model.

China's pursuit of economic growth, rapid industrialization, and urbanization over the past few decades has resulted in high energy consumption, which in turn has caused serious environmental pollution problems, such as CO2 and PM2.5 emissions, the long-term exposure to which can seriously affect resident health. To resolve these air pollution problems, the Chinese government has put in place several policies to reduce air and environmental pollution. Past studies on energy and environmental efficiency have been mostly static, have ignored the dynamic changes over time and regional differences, and have rarely considered human health factors. Therefore, this study employed a modified meta 2-stage Epsilon-Based Measure (EBM) Malmquist model to explore the relationships between the economy, energy, the environment, health and media, and the regional differences in 31 Chinese cities from 2014 to 2016. It was found that (1) Haikou and Lhasa's efficiencies were 1 and were the best in all 3 years, and Shijiazhuang, Jinan and Shenyang's were the most improved; (2) there was a gap between the eastern, central and western technological frontiers, with Chengdu, Hohhot, Chongqing, and Nanchang having technological gap ratios below 0.70 in the western and central Chinese regions, and Haikou, Guangzhou, and Shanghai in eastern China having technological gap ratios above 0.90 in all 3 years; and (3) the variations in the health treatment stage were greater than in the production stage, indicating that technological changes and efficiency improvements in the health treatment stages in each city were not stable.

Economic, Social, Medical, Work Injury, and Environmental Efficiency Assessments.

Improving the management efficiency of industrial accidents is significant for stabilizing social order and improving production efficiency. Although many previous studies have discussed the impact of work injury on different occupations from the work safety and health perspectives, few have jointly discussed economic, social, medical, and environmental pollution issues, and those that do mostly employ static models, failing to take into account welfare factors and environmental pollution issues that affect society. Therefore, in order to understand the dynamic evolution trend between social and economic activities and environmental issues, this study utilizes a modified undesirable two-stage dynamic exogenous data envelopment analysis (DEA) model to explore the economic, social, medical, and environmental efficiencies of 30 provinces in China to fill the gap in the literature. In terms of work injury insurance expenditure efficiency, the results show that the air quality index (AQI) impacts the ranking of China's 30 provincial regions, with Fujian, Ningxia, Qinghai, Shandong, Tianjin, and Xinjiang being greatly affected. AQI significantly influences overall factor efficiency, rescue invalid deaths, and the work-related injuries in the various regions. AQI also has a relatively small effect on the efficiency of work injury insurance benefits. Based on this, we offer suggestions for policy makers to evaluate the social benefits of environmental governance and the efficiency of human capital.

The Energy Efficiency and the Impact of Air Pollution on Health in China.

The rapid growth of China's economy in recent years has greatly improved its citizens' living standards, but economic growth consumes many various energy sources as well as produces harmful air pollution. Nitrogen oxides, SO2 (sulfur dioxide), and other polluting gases are damaging the environment and people's health, with a particular spike in incidences of many air pollution-related diseases in recent years. While there have been many documents discussing China's energy and environmental issues in the past, few of them analyze economic development, air pollution, and residents' health together. Therefore, this study uses the modified undesirable dynamic two-stage DEA (data envelopment analysis) model to explore the economic, environmental, and health efficiencies of 30 provinces in China. The empirical results show the following: (1) Most provinces have lower efficiency values in the health stage than in the production stage. (2) Among the provinces with annual efficiency values below 1, their energy consumption, CO2 (carbon dioxide), and NOx (nitrogen oxide) efficiency values have mostly declined from 2013 to 2016, while their SO2 efficiency values have increased (less SO2 emissions). (3) The growth rate of SO2 efficiency in 2016 for 10 provinces is much higher than in previous years. (4) The health expenditure efficiencies of most provinces are at a lower level and show room for improvement. (5) In most provinces, the mortality rate is higher, but on a decreasing trend. (6) Finally, as representative for a typical respiratory infection, most provinces have a high level of tuberculosis efficiency, indicating that most areas of China are highly effective at respiratory disease governance.

Energy and Health Efficiencies in China with the Inclusion of Technological Innovation.

The price people pay for low energy efficiency includes not only high manufacturing costs, but also public health. With technological innovation as the driving factor for improving energy efficiency, this study uses two-stage dynamic undesirable data envelopment analysis (TDU-DEA) under variable return to scale to evaluate energy and health efficiencies with inclusion of technological innovation in 30 provinces of China over the period 2013-2016. The results show that the mean overall efficiencies and ranks in the eastern region are significantly higher than those in the non-eastern region, with or without the inclusion of technological innovations, and that energy efficiency in most provinces is higher than health efficiency. The average technological innovation efficiencies for energy conservation are higher than those for respiratory medical treatment. The former gap between the eastern region and non-east region is also smaller than the latter. Lastly, regions with the best technological innovation efficiencies are Beijing, Shanghai, Guangdong, Fujian, Hainan, Hebei, Inner Mongolia, Ningxia, Qinghai, Shandong, Shanxi, Tianjin, Xinjiang, and Yunnan.

Dynamic Linkages among Economic Development, Energy Consumption, Environment and Health Sustainable in EU and Non-EU Countries.

There is a close and important relationship between environmental pollution and public health, and environmental pollution has an important impact on the public health. This study employed the two-stage meta-frontier dynamic network data envelopment analysis (TMDN-DEA) model to explore the environment pollution effects from energy consumption on the mortality of children and adult, tuberculosis rate, survival rate and health expenditure efficiencies in 28 EU countries and 53 non-EU countries from 2010 to 2014. We calculated the overall efficiency scores and the technology gap ratios of each EU and non-EU countries and the efficiencies of input and output variables in the production and health stage. The average overall efficiencies each year in EU countries are higher than in the non-EU countries. But EU countries have higher energy efficiency than non-EU countries, and non-EU countries have higher health efficiency than EU countries. The health expenditure efficiencies in the EU countries are obviously lower than those in non-EU countries. The renewable energy efficiencies are obviously higher than the non-renewable energy efficiencies; PM2.5 efficiencies are obviously higher than the CO2 efficiencies and the children's mortality rate efficiencies are higher than the adult's mortality rate efficiencies for EU countries and non-EU countries. The government management in the EU and non-EU countries should be strengthened to reduce the air pollutant and carbon dioxide emissions and raise energy transformation to the clean energy in renewable energy and improve health efficiencies in medical and health care field.

Trapping single atoms on a nanophotonic circuit with configurable tweezer lattices.

Trapped atoms near nanophotonics form an exciting platform for bottom-up synthesis of strongly interacting quantum matter. The ability to induce tunable long-range atom-atom interactions with photons presents an opportunity to explore many-body physics and quantum optics. Here we implement a configurable optical tweezer array over a planar photonic circuit tailored for cold atom integration and control for trapping and high-fidelity imaging of one or more atoms in an array directly on a photonic structure. Using an optical conveyor belt formed by a moving optical lattice within a tweezer potential, we show that single atoms can be transported from a reservoir into close proximity of a photonic interface, potentially allowing for the synthesis of a defect-free atom-nanophotonic hybrid lattice. Our experimental platform can be integrated with generic planar photonic waveguides and resonators, promising a pathway towards on-chip many-body quantum optics and applications in quantum technology.