Moiré Superlattice-Induced Superconductivity in One-Unit-Cell FeTe.

In this work, we demonstrate that the nonsuperconducting single-layer FeTe can become superconducting when its structure is properly tuned by epitaxially growing it on Bi2Te3 thin films. The properties of the single-layer FeTe deviate strongly from its bulk counterpart, as evidenced by the emergence of a large superconductivity gap (3.3 meV) and an apparent 8 × 2 superlattice (SL). Our first-principles calculations indicate that the 8 × 2 SL and the emergence of the novel superconducting phase are essentially the result of the structural change in FeTe due to the presence of the underlying Bi2Te3 layer. The structural change in FeTe likely suppresses the antiferromagnetic order in the FeTe and leads to superconductivity. Our work clearly demonstrates that moiré pattern engineering in a heterostructure is a reachable dimension for investigating novel materials and material properties.

Superconductivity in Single-Quintuple-Layer Bi2Te3 Grown on Epitaxial FeTe.

How an interfacial superconductivity emerges during the nucleation and epitaxy is of great importance not only for unveiling the physical insights but also for finding a feasible way to tune the superconductivity via interfacial engineering. In this work, we report the nanoscale creation of a robust and relatively homogeneous interfacial superconductivity (TC ≈ 13 K) on the epitaxial FeTe surface, by van der Waals epitaxy of single-quintuple-layer topological insulator Bi2Te3. Our study suggests that the superconductivity in the Bi2Te3/FeTe heterostructure is generated at the interface and that the superconductivity at the interface does not enhance or weaken with the increase of the Bi2Te3 thickness beyond 1 quintuple layer (QL). The observation of the topological surface states crossing Fermi energy in the Bi2Te3/FeTe heterostructure with the average Bi2Te3 thickness of about 20 QL provides further evidence that this heterostructure may potentially host Majorana zero modes.

Evidence for Magnetic Skyrmions at the Interface of Ferromagnet/Topological-Insulator Heterostructures.

The heterostructures of the ferromagnet (Cr2Te3) and topological insulator (Bi2Te3) have been grown by molecular beam epitaxy. The topological Hall effect as evidence of the existence of magnetic skyrmions has been observed in the samples in which Cr2Te3 was grown on top of Bi2Te3. Detailed structural characterizations have unambiguously revealed the presence of intercalated Bi bilayer nanosheets right at the interface of those samples. The atomistic spin-dynamics simulations have further confirmed the existence of magnetic skyrmions in such systems. The heterostructures of ferromagnet and topological insulator that host magnetic skyrmions may provide an important building block for next generation of spintronics devices.

Effects of Homogenization Heat Treatment on the Fe Micro-Segregation in Ti-1023 Titanium Alloy.

The segregation of the Fe element in Ti-10V-2Fe-3Al titanium alloy (Ti-1023) can lead to the generation of beta flecks, which seriously affects the performance of Ti-1023 products. During the heat treatment (HT) process at a high temperature, the Fe element in Ti-1023 ingots will migrate, making its distribution more uniform and reducing the segregation index. In this paper, the control of Fe micro-segregation in Ti-1023 ingots by homogenization HT was investigated. Firstly, dissection sampling and SEM-EDS analysis methods were used to study the distribution pattern of the Fe element in the equiaxed grains in the core of Ti-1023 ingots. It was found that the Fe content in the grain gradually increased along with the radial direction from the core to the grain boundary. Then, the homogenization HT experiments and numerical simulations of Ti-1023 at different HT temperatures from 1050 °C to 1200 °C were carried out. The results showed that the uniformity of Fe element distribution within grain can be significantly improved by the homogenization HT. With increasing HT temperature, Fe atoms migration ability increases, and the uniformity of Fe element distribution improves. Homogenization HT at 1150 °C and 1200 °C for 12 h can effectively reduce the degree of Fe element segregation.

A RFID Authentication Protocol for Epidemic Prevention and Epidemic Emergency Management Systems.

The outbreak of the novel coronavirus has exposed many problems in the auxiliary information system for epidemic prevention and control, which needs to be resolved by using methods such as the antitampering of logistics data and the management and control of epidemic materials. This article discusses the introduction of emerging technologies such as Radio Frequency Identification (RFID), which support privacy protection into the auxiliary information system for epidemic prevention and control. Recently, this paper found that Khwaja et al.'s protocol (RAPUS protocol) is susceptible to database impersonation attacks and reader impersonation attacks. Therefore, this article proposes the enhanced protocol, which not only perfectly solves the problems of the abovementioned protocols but also comprehensively compares multiple protocols. The enhanced protocol has higher efficiency and security. The security of the proposed protocol (RAPUS + protocol) is analyzed by GNY logic and the AVISPA model. The designed scheme can help realize the safety and traceability of epidemic prevention materials and improve the automation and decision-making efficiency of the epidemic prevention.

Topological Hall Effect in Traditional Ferromagnet Embedded with Black-Phosphorus-Like Bismuth Nanosheets.

Topological Hall effect is an abnormal Hall response arising from the scalar spin chirality of chiral magnetic textures. Up to now, such an effect is only observed in certain special materials, but rarely in traditional ferromagnets. In this work, we have implemented the molecular beam epitaxy technique to successfully embed black-phosphorus-like bismuth nanosheets with strong spin-orbit coupling into the bulk of chromium telluride Cr2Te3, as evidenced by atomically resolved energy dispersive X-ray spectroscopy mapping. Distinctive from pristine Cr2Te3, these Bi-embedded Cr2Te3 epitaxial films exhibit not only pronounced topological Hall effects, but also magnetoresistivity anomalies and differential magnetic susceptibility plateaus. All these experimental features point to the possible emergence of magnetic skyrmions in Bi-embedded Cr2Te3, which is further supported by our numerical simulations with all input parameters obtained from the first-principle calculations. Therefore, our work demonstrates a new efficient way to induce skyrmions in ferromagnets, as well as the topological Hall effect by embedding nanosheets with strong spin-orbit couplings.