Classical and Emerging Characterization Techniques for Investigation of Ion Transport Mechanisms in Crystalline Fast Ionic Conductors.

Ion transport in crystalline fast ionic conductors is a complex physical phenomenon. Certain ionic species (e.g., Ag+, Cu+, Li+, F-, O2-, H+) in a solid crystalline framework can move as fast as in liquids. This property, although only observed in a limited number of materials, is a key enabler for a broad range of technologies, including batteries, fuel cells, and sensors. However, the mechanisms of ion transport in the crystal lattice of fast ionic conductors are still not fully understood despite the substantial progress achieved in the last 40 years, partly because of the wide range of length and time scales involved in the complex migration processes of ions in solids. Without a comprehensive understanding of these ion transport mechanisms, the rational design of new fast ionic conductors is not possible. In this review, we cover classical and emerging characterization techniques (both experimental and computational) that can be used to investigate ion transport processes in bulk crystalline inorganic materials which exhibit predominant ion conduction (i.e., negligible electronic conductivity) with a primary focus on literature published after 2000 and critically assess their strengths and limitations. Together with an overview of recent understanding, we highlight the need for a combined experimental and computational approach to study ion transport in solids of desired time and length scales and for precise measurements of physical parameters related to ion transport.

First Report of Leaf Spot Caused by Nigrospora aurantiaca in Tobacco in China.

Tobacco (Nicotiana tabacum L.) is one of the most important cash crops in China. In June 2019, tobacco (cv. Yunyan 87) samples with gray spots surrounded by yellowish ring were collected in Zhengan (107.43° N, 28.55° E), Guizhou province, China. Pieces of leaf tissue (3 mm × 3 mm) that were cut at the junction of diseased and healthy portion were surface sterilized and plated on potato dextrose agar (PDA). After incubation at 25°C in the dark for 7 days, an isolate (T22) was chosen and used for pathogen identification. The colonies had aerial hyphae, initially white and then turned grey, and produced a soluble red pigmen on PDA. The colonies were floccose aerial mycelia, dark grey, with pale brown hyphae, and produced conidia on oatmeal agar. Conidia were ovoid or ampulliform, black, smooth. Based on morphological characteristics, isolate T22 was identified as Nigrospora aurantiaca (Wang et al. 2017). For molecular identification, the large subunit (LSU) and internal transcribed spacer (ITS) of ribosomal RNA, ß-tubulin (TUB) and translation elongation factor 1-alpha (TEF1) genes of T22 were amplified by PCR with the primer sets LROR/LR5, ITS1/ITS4, Bt2a/Bt2b and EF1-728F/EF2 (Suwannarach et al.2019), then PCR products were sequenced. Their GenBank accession numbers were MT341787, MT328649, MT348395 and MT348394, respectively. Phylogenetic tree of combined LSU, ITS, TUB, and TEF sequences showed that isolate T22 was assigned to N. aurantiaca strain (CGMCC 3.18130 and LC 7034) with 100% bootstrap support. Based on morphological characteristics and multi-gene molecular analysis, isolate T22 was identified as N. aurantiaca. To fulfill Koch's postulates, PDA plugs grown with N. aurantiaca were placed on the leaves of four tobacco plants (cv. Yunyan 87) at the 10-leaf stage. Leaves inoculated with PDA only plugs served as the controls. Treated plants were maintained in a greenhouse with temperatures ranging from 18 to 28 °C. Five days after inoculation, typical symptoms were observed on inoculated leaves but not on the controls. N. aurantiaca was re-isolated from the diseased leaves but not from the controls. To our best of knowledge, this is the first report of N. aurantiaca causing leaf spot on tobacco in China. N. aurantiaca has been reported to cause leaf spot on Castanea mollissima in China (Luo et al. 2020). Due to potential serious damage caused by the disease in this region, proper disease management practices should be developed and implemented.

Hole and Protonic Polarons in Perovskites.

Electric charge transport is an essential process for all electrical and electrochemical energy systems, including inanimate and animate matter. In this issue on materials for energy conversion, we compare and discuss the role of electron holes and protons as charge carriers in solids. Specifically we outline how the temperature or thermal bath affect the charge carrier concentration and mobility for some metal oxides with the perovskite structure. The frequent observation that the conductivity becomes independent of the activation energy at the isokinetic temperature, known as the Meyer-Neldel rule, is an important aspect of our interpretation of the physical mechanism of conduction by polaron hopping.

Entropy and Isokinetic Temperature in Fast Ion Transport.

Ion transport in crystalline solids is an essential process for many electrochemical energy converters such as solid-state batteries and fuel cells. Empirical data have shown that ion transport in crystal lattices obeys the Meyer-Neldel Rule (MNR). For similar, closely related materials, when the material properties are changed by doping or by strain, the measured ionic conductivities showing different activation energies intersect on the Arrhenius plot, at an isokinetic temperature. Therefore, the isokinetic temperature is a critical parameter for improving the ionic conductivity. However, a comprehensive understanding of the fundamental mechanism of MNR in ion transport is lacking. Here the physical significance and applicability of MNR is discussed, that is, of activation entropy-enthalpy compensation, in crystalline fast ionic conductors, and the methods for determining the isokinetic temperature. Lattice vibrations provide the excitation energy for the ions to overcome the activation barrier. The multi-excitation entropy model suggests that isokinetic temperature can be tuned by modulating the excitation phonon frequency. The relationship between isokinetic temperature and isokinetic prefactor can provide information concerning conductivity mechanisms. The need to effectively determine the isokinetic temperature for accelerating the design of new fast ionic conductors with high conductivity is highlighted.

Iron resonant photoemission spectroscopy on anodized hematite points to electron hole doping during anodization.

Anodization of α-Fe(2)O(3) (hematite) electrodes in alkaline electrolyte under constant potential conditions the electrode surface in a way that an additional current wave occurs in the cyclic voltammogram. The energy position of this current wave is closely below the potential of the anodization treatment. Continued cycling or exchanging of the electrolyte causes depletion of this new feature. The O 1s and Fe 2p core-level X-ray photoelectron spectra (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectra of such conditioned hematite exhibit a chemical shift towards higher binding energies, in line with the general perception that anodization generates oxide species with dielectric properties. The valence band XPS and particularly the iron resonant valence band photoemission spectra, however, are shifted towards the opposite direction, that is, towards the Fermi energy, suggesting that hole doping on hematite has taken place during anodization. Quantitative analysis of the Fe 2p resonant valence band photoemission spectra shows that the spectra obtained at the Fe 2p absorption threshold are shifted by virtually the same energy as the anodization potential towards the Fermi energy. The tentative interpretation of this observation is that anodization forms a surface film on the hematite that is specific to the anodization potential.

Observation of Potential-Induced Hydration on the Surface of Ceramic Proton Conductors Using In Situ Near-Ambient Pressure X-ray Photoelectron Spectroscopy.

Interactions of ceramic proton conductors with the environment under operating conditions play an essential role on material properties and device performance. It remains unclear how the chemical environment of material, as modulated by the operating condition, affects the proton conductivity. Combining near-ambient pressure X-ray photoelectron spectroscopy and impedance spectroscopy, we investigate the chemical environment changes of oxygen and the conductivity of BaZr0.9Y0.1O3-δ under operating condition. Changes in O 1s core level spectra indicate that adding water vapor pressure increases both hydroxyl groups and active proton sites at undercoordinated oxygen. Applying external potential further promotes this hydration effect, in particular, by increasing the amount of undercoordinated oxygen. The enhanced hydration is accompanied by improved proton conductivity. This work highlights the effects of undercoordinated oxygen for improving the proton conductivity in ceramics.

The Role of Strain in Proton Conduction in Multi-Oriented BaZr0.9Y0.1O3-δ Thin Film.

Within the emerging field of proton-conducting fuel cells, BaZr0.9Y0.1O3-δ (BZY10) is an attractive material due to its high conductivity and stability. The fundamentals of conduction in sintered pellets and thin films heterostructures have been explored in several studies; however, the role of crystallographic orientation, grains, and grain boundaries is poorly understood for proton conduction. This article reports proton conduction in a self-assembled multi-oriented BZY10 thin film grown on top of a (110) NdGaO3 substrate. The multiple orientations are composed of different lattices, which provide a platform to study the lattice-dependent conductivity through different orientations in the vicinity of grain boundary between them and the substrate. The crystalline stacking of each orientation is confirmed by X-ray diffraction analysis and scanning transmission electron microscopy. The transport measurements are carried out under different gas atmospheres. The highest conductivity of 3.08 × 10-3 S cm-1 at 400 °C is found under a wet H2 environment together with an increased lattice parameter of 4.208 Å, while under O2 and Ar environments, the film shows lower conductivity and lattice parameter. Our findings not only demonstrate the role of crystal lattice for conduction properties but also illustrate the importance of self-assembled strategies to achieve high proton conduction in BZY10 thin films.

Photoinduced large polaron transport and dynamics in organic-inorganic hybrid lead halide perovskite with terahertz probes.

Organic-inorganic hybrid metal halide perovskites (MHPs) have attracted tremendous attention for optoelectronic applications. The long photocarrier lifetime and moderate carrier mobility have been proposed as results of the large polaron formation in MHPs. However, it is challenging to measure the effective mass and carrier scattering parameters of the photogenerated large polarons in the ultrafast carrier recombination dynamics. Here, we show, in a one-step spectroscopic method, that the optical-pump and terahertz-electromagnetic probe (OPTP) technique allows us to access the nature of interplay of photoexcited unbound charge carriers and optical phonons in polycrystalline CH3NH3PbI3 (MAPbI3) of about 10 µm grain size. Firstly, we demonstrate a direct spectral evidence of the large polarons in polycrystalline MAPbI3. Using the Drude-Smith-Lorentz model along with the FrÓ§hlich-type electron-phonon (e-ph) coupling, we determine the effective mass and scattering parameters of photogenerated polaronic carriers. We discover that the resulting moderate polaronic carrier mobility is mainly influenced by the enhanced carrier scattering, rather than the polaron mass enhancement. While, the formation of large polarons in MAPbI3 polycrystalline grains results in a long charge carrier lifetime at room temperature. Our results provide crucial information about the photo-physics of MAPbI3 and are indispensable for optoelectronic device development with better performance.

Efficient electron transfer and sensitizer regeneration in stable pi-extended tetrathiafulvalene-sensitized solar cells.

The development of metal-free organic sensitizers is a key issue in dye-sensitized solar cell research. We report successful photovoltaic conversion with a new class of stable tetrathiafulvalene derivatives, showing surprising electrochemical and kinetic properties. With time-resolved spectroscopy we could observe highly efficient regeneration of the photo-oxidized tetrathiafulvalene sensitizers, which were attached to a mesoporous TiO(2) film, by a redox mediator in the pores (iodide/tri-iodide), even though the measured driving force for regeneration was only approximately 150 mV. This important proof-of-concept shows that sensitizers with a small driving force, i.e. the oxidation potential of the sensitizer is separated from the redox potenial of the mediator by as little as 150 mV, can operate functionally in dye-sensitized solar cells and eventually aid to reduce photovoltage losses due to poor energetic alignment of the materials.

Fungal Composition and Diversity of the Tobacco Leaf Phyllosphere During Curing of Leaves.

Rhizopus oryzae causes tobacco pole rot in China during tobacco flue-curing. Flue-curing is a post-harvest process done to prepare tobacco leaves and involves three different stages: the yellowing stage has the lowest temperatures and highest humidity, then the color-fixing stage has higher temperatures and medium humidity, and finally the stem-drying stage has the highest temperatures and lowest humidity. In this study, fungal culturing and IonS5XL high-throughput sequencing techniques were used to reveal the fungal community of the petioles and lamina of tobacco leaves infected with pole rot during flue-curing. A total of 108 fungal isolates belonging to 6 genera were isolated on media. The most common fungal species isolated was the pathogen, R. oryzae, that was most often found equally on petioles and laminas in the color-fixing stage, followed by saprotrophs, mostly Aspergillus spp. High-throughput sequencing revealed saprotrophs with Alternaria being the most abundant genus, followed by Phoma, Cercospora, and Aspergillus, whereas Rhizopus was the tenth most abundant genus, which was mostly found on petioles at the yellowing stage. Both culturable fungal diversity and fungal sequence diversity was higher at stem-drying stage than the yellowing and color-fixing stages, and diversity was higher with leaf lamina than petioles revealing that the changes in fungal composition and diversity during the curing process were similar with both methods. This study demonstrates that the curing process affects the leaf microbiome of tobacco during the curing process, and future work could examine if any of these saprotrophic fungi detected during the curing of tobacco leaves may be potential biocontrol agents for with pole rot in curing chambers.

Effects of Illumination Direction on the Surface Potential of CH3NH3PbI3 Perovskite Films Probed by Kelvin Probe Force Microscopy.

The development of organic-inorganic hybrid perovskite solar cells requires critical understanding in the charge-carrier behaviors in the perovskite light absorbers and devices. Kelvin probe force microscopy (KPFM) has been applied as a powerful tool to probe the electrical potential distribution of perovskite films and devices, providing fundamental insights into their charge-carrier properties. When measuring the material photoresponses, various approaches have been employed to illuminate the samples. Here, we measured the surface potential of the layer in the regular mesoporous structure (CH3NH3PbI3/m-TiO2/c-TiO2/FTO) and inverted planar structure (CH3NH3PbI3/NiO/FTO) devices via KPFM. Effects of two representative illumination methods are compared-illumination from top, and from underneath through the transparent glass substrate. By comparing the variation in surface potential under two illumination methods, the surface potential of the perovskite-absorbing layer in a regular structure is higher than that in the inverted structure. The potential difference in two structures implies that the photogenerated charge carriers are injected to the TiO2 electron-transport layer and NiO hole-transport layer, resulting in positive charges and negative charges accumulated in the perovskite-absorbing layer. We demonstrated that the illumination direction has an impact on the surface potential measurement. For the CH3NH3PbI3/TiO2 structure, illumination from underneath facilitates a larger potential change. While for the CH3NH3PbI3/NiO structure with insensitive photoresponse in potential change, the illumination direction has a minor effect.

Emergent wave phenomena in coupled elastic bars: from extreme attenuation to realization of elastodynamic switches.

Metamaterials with acoustic and elastic band gaps are of great interest to scientists and engineers. Here, we introduce a novel mechanism for emergence of multiple band gaps with extreme attenuation by coupling continuous one-dimensional elastic structures. We show that it is possible to develop extreme attenuation at several frequencies from coupling two homogenous bars of different elastodynamic properties even though each bar individually possesses no such gaps. Moreover, if each bar is a composite on its own, multiple resonant band gaps appear in the compound system which do not exist in either bar. We verify our results by conducting numerical simulations for the elastodynamic response and show that the resonant gaps are efficient in attenuating wave propagation. Furthermore, we show that by carefully tailoring the properties of the coupled bars we may construct elastodynamic signal choppers. These results open a new gate for designing Metamaterial with unique wave modulation properties.

Experimental neutron scattering evidence for proton polaron in hydrated metal oxide proton conductors.

Hydration of oxygen-deficient metal oxides causes filling of oxygen vacancies and formation of hydroxyl groups with interstitial structural protons, rotating around the oxygen in localized motion. Thermal activation from 500 to 800 K triggers delocalization of the protons by jumping to adjacent oxygen ions, constituting proton conductivity. We report quantitative analyses of proton and lattice dynamics by neutron-scattering data, which reveal the interaction of protons with the crystal lattice and proton-phonon coupling. The motion for the proton trapped in the elastic crystal field yields Eigen frequencies and coupling constants, which satisfy Holstein's polaron model for electrons and thus constitutes first experimental evidence for a proton polaron at high temperature. Proton jump rates follow a polaron model for cerium-oxygen and hydroxyl stretching modes, which are thus vehicles for proton conductivity. This confirms that the polaron mechanism is not restricted to electrons, but a universal charge carrier transport process.