Localization and delocalization of light in photonic moiré lattices.

Moiré lattices consist of two superimposed identical periodic structures with a relative rotation angle. Moiré lattices have several applications in everyday life, including artistic design, the textile industry, architecture, image processing, metrology and interferometry. For scientific studies, they have been produced using coupled graphene-hexagonal boron nitride monolayers1,2, graphene-graphene layers3,4 and graphene quasicrystals on a silicon carbide surface5. The recent surge of interest in moiré lattices arises from the possibility of exploring many salient physical phenomena in such systems; examples include commensurable-incommensurable transitions and topological defects2, the emergence of insulating states owing to band flattening3,6, unconventional superconductivity4 controlled by the rotation angle7,8, the quantum Hall effect9, the realization of non-Abelian gauge potentials10 and the appearance of quasicrystals at special rotation angles11. A fundamental question that remains unexplored concerns the evolution of waves in the potentials defined by moiré lattices. Here we experimentally create two-dimensional photonic moiré lattices, which-unlike their material counterparts-have readily controllable parameters and symmetry, allowing us to explore transitions between structures with fundamentally different geometries (periodic, general aperiodic and quasicrystal). We observe localization of light in deterministic linear lattices that is based on flat-band physics6, in contrast to previous schemes based on light diffusion in optical quasicrystals12, where disorder is required13 for the onset of Anderson localization14 (that is, wave localization in random media). Using commensurable and incommensurable moiré patterns, we experimentally demonstrate the two-dimensional localization-delocalization transition of light. Moiré lattices may feature an almost arbitrary geometry that is consistent with the crystallographic symmetry groups of the sublattices, and therefore afford a powerful tool for controlling the properties of light patterns and exploring the physics of periodic-aperiodic phase transitions and two-dimensional wavepacket phenomena relevant to several areas of science, including optics, acoustics, condensed matter and atomic physics.

Amphipathic Liponecrosis Impairs Bacterial Clearance and Causes Infection During Sterile Inflammation.

BACKGROUND & AIMS: Although transient bacteremia is common during dental and endoscopic procedures, infections developing during sterile diseases like acute pancreatitis (AP) can have grave consequences. We examined how impaired bacterial clearance may cause this transition. METHODS: Blood samples from patients with AP, normal controls, and rodents with pancreatitis or those administered different nonesterified fatty acids (NEFAs) were analyzed for albumin-unbound NEFAs, microbiome, and inflammatory cell injury. Macrophage uptake of unbound NEFAs using a novel coumarin tracer were done and the downstream effects-NEFA-membrane phospholipid (phosphatidylcholine) interactions-were studied on isothermal titration calorimetry. RESULTS: Patients with infected AP had higher circulating unsaturated NEFAs; unbound NEFAs, including linoleic acid (LA) and oleic acid (OA); higher bacterial 16S DNA; mitochondrial DNA; altered ß-diversity; enrichment in Pseudomonadales; and increased annexin V-positive myeloid (CD14) and CD3-positive T cells on admission. These, and increased circulating dead inflammatory cells, were also noted in rodents with unbound, unsaturated NEFAs. Isothermal titration calorimetry showed progressively stronger unbound LA interactions with aqueous media, phosphatidylcholine, cardiolipin, and albumin. Unbound NEFAs were taken into protein-free membranes, cells, and mitochondria, inducing voltage-dependent anion channel oligomerization, reducing ATP, and impairing phagocytosis. These were reversed by albumin. In vivo, unbound LA and OA increased bacterial loads and impaired phagocytosis, causing infection. LA and OA were more potent for these amphipathic interactions than the hydrophobic palmitic acid. CONCLUSIONS: Release of stored LA and OA can increase their circulating unbound levels and cause amphipathic liponecrosis of immune cells via uptake by membrane phospholipids. This impairs bacterial clearance and causes infection during sterile inflammation.

Plasmonic hotspot arrays boost second harmonic generation in thin-film lithium niobate.

Focusing light down to subwavelength scales to enhance the light-matter interaction has been highly sought after, which has promoted significant researches and applications in nanophotonics. Plasmonic nanoantennae are a significant tool to achieve this goal since they can confine light into ultra-small volumes far below the diffraction limit. However, metallic materials have the property of central symmetry, resulting in weak second-order nonlinear effects. Here, we design plasmonic bowtie nanoantennae on thin-film lithium niobate (TFLN) for deep-subwavelength light confinement to boost the second-harmonic generation (SHG) in TFLN via the plasmonic hotspot enhancement. The SHG enhancement factor of about 20 times as compared to unpatterned TFLN is achieved in the experiment when resonantly excited by femtosecond laser. This work proposes a route for subwavelength nonlinear optics on the TFLN platform.

Quickly tunable ultra-narrow filter via a metal film waveguide.

The development of fast, efficient, and cost-effective tunable optical filters is a tireless pursuit of the goal in the field of optical signal processing and communications. However, the traditional filters have been limited by their complex structures, slow tuning speed, and high cost. To address this challenge, we present a tunable ultra-narrow bandpass filter, which is fabricated by a metal layer cladded in a high-parallelism and high-precision piezoelectric ceramic for an interlayer. Experimental results show a remarkable full width at half maximum of 51 pm and a fast response time of 800 ns. In addition, by cascading double filters, the wavelength of the output light has been fine-tuned from a Vernier effect. Moreover, we realize a tunable filter to select and output several ultra-narrow single peaks with 56% efficiency in the 2 nm range. Furthermore, it offers a wide tunable range, exceptional narrowband filtering performance, and fast piezoelectric response times. Hence, it is particularly well suited to applications requiring precise wavelength selection and control, opening new possibilities in the field of tunable optical filters.

Noncritical birefringence phase-matched second harmonic generation in a lithium-niobate-on-insulator micro-waveguide for green light emission.

Lithium niobate on insulator (LNOI) holds great potential for frequency conversion, where a variety of high-performance nonlinear devices based on different structures has been demonstrated. Here, we report on second harmonic generation (SHG) in MgO-doped LNOI ridge micro-waveguides for efficient green light emission, via an exact type-I noncritical birefringence phase matching (BPM). The LNOI micro-waveguide has a cross section of ∼3×4 µm2, featuring low coupling loss with lens fiber. The normalized conversion efficiency from a continuous-wave (cw) pump to its second harmonic is measured to be 37%/Wcm2 in a single-pass configuration. The device shows both relatively high efficiency and a void of periodic poling, offering a potential solution for efficient and scalable green light sources and frequency converters.

UV-enhanced photorefractive response rate in a thin-film lithium niobate microdisk.

The photorefractive (PR) effect plays a critical role in emerging photonic technologies, including dynamic volume holography and on-chip all-optical functionalities. Nevertheless, its slow response rate has posed a significant obstacle to its practical application. Here, we experimentally demonstrate the enhancement of the PR response rate in a high-Q thin-film lithium niobate (TFLN) microdisk under UV light irradiation. At an irradiation intensity of 30 mW/cm2, the PR effect achieves a high response bandwidth of approximately 256 kHz. By employing this UV-assisted PR effect, we have achieved rapid laser-cavity locking and self-stabilization, where perturbations are automatically compensated. This technique paves the way toward real-time dynamic holography, editable photonic devices on a lithium niobate platform, and high-speed all-optical information processing.

Improved performance of a fiber-optic hydrogen sensor based on a controllable optical heating technology.

A novel, to the best of our knowledge, and compact fiber-optic hydrogen sensor based on light intensity demodulation and controllable optical heating technology is proposed and experimentally investigated. This system employs three photodetectors for optic signal transformation. The first PD is used to receive a little fraction of the amplified spontaneous emission (ASE) for calibration, and the second PD is utilized to detect optic signal reflected by a single mode fiber deposited with WO3-Pd2Pt-Pt composite film. The last PD is utilized to receive the optical power reflected by the short fiber Bragg grating (SFBG) with a central wavelength located in a steep wavelength range (the intensity decreases approximately linearly with the increase of the wavelength) of the ASE light source. A 980 nm laser and proportion integration differentiation (PID) controller were employed to ensure the hydrogen sensitive film working at an operating temperature of 60°C. This sensing system can display a quick response time of 0.4 s toward 10,000 ppm hydrogen in air. In addition, the detection limit of 5 ppm in air can be achieved with this sensing system. The stability of this sensor can be greatly enhanced with a controllable optical heating system, which can greatly promote its potential application in various fields.

Monolithic tunable dual-wavelength laser utilizing erbium-doped lithium niobate on an insulator.

We demonstrate a monolithic tunable dual-wavelength laser fabricated on erbium-doped lithium niobate on an insulator (Er:LNOI). The dual-wavelength laser enables independent tuning with a continuously linear electro-optic (EO)-modulated tuning range of 11.875 GHz at a tuning efficiency of 0.63 pm/V. Tunable microwave generation within 50 GHz with a maximum extinction ratio of 35 dB is experimentally demonstrated by further exploring the charge accumulation effect in LNOI. The monolithic design of this work paves the way for microscale integration of laser devices, presenting significant prospects in photonics research and applications.

Clonal Hematopoiesis of Indeterminate Potential Is Associated With Coronary Microvascular Dysfunction In Early Nonobstructive Coronary Artery Disease.

BACKGROUND: Clonal hematopoiesis (CH) of indeterminate potential (CHIP) is a risk factor for cardiovascular disease. The relationship between CHIP and coronary microvascular dysfunction (CMD) is unknown. The current study examines the association between CHIP and CH with CMD and the potential relationships in risk for adverse cardiovascular outcomes. METHODS: In this retrospective observational study, targeted next-generation sequencing was performed for 177 participants with no coronary artery disease who presented with chest pain and underwent routine coronary functional angiogram. Patients with somatic mutations in leukemia-associated driver genes in hematopoietic stem and progenitor cells were examined; CHIP was considered at a variant allele fraction ≥2%; CH was considered at a variant allele fraction ≥1%. CMD was defined as coronary flow reserve to intracoronary adenosine of ≤2. Major adverse cardiovascular events considered were myocardial infarction, coronary revascularization, or stroke. RESULTS: A total of 177 participants were examined. Mean follow-up was 12±7 years. A total of 17 patients had CHIP and 28 had CH. Cases with CMD (n=19) were compared with controls with no CMD (n=158). Cases were 56±9 years, were 68% women, and had more CHIP (27%; P=0.028) and CH (42%; P=0.001) than controls. CMD was associated with independent risk for major adverse cardiovascular events (hazard ratio, 3.89 [95% CI, 1.21-12.56]; P=0.023), and 32% of this risk was mediated by CH. The risk mediated by CH was ≈0.5× as large as the direct effect of CMD on major adverse cardiovascular events. CONCLUSIONS: In humans, we observe patients with CMD are more likely to have CHIP, and nearly one-third of major adverse cardiovascular events in CMD are mediated by CH.

A Polygenic Risk Score for Idiopathic Pulmonary Fibrosis and Interstitial Lung Abnormalities.

Rationale: In addition to rare genetic variants and the MUC5B locus, common genetic variants contribute to idiopathic pulmonary fibrosis (IPF) risk. The predictive power of common variants outside the MUC5B locus for IPF and interstitial lung abnormalities (ILAs) is unknown. Objectives: We tested the predictive value of IPF polygenic risk scores (PRSs) with and without the MUC5B region on IPF, ILA, and ILA progression. Methods: We developed PRSs that included (PRS-M5B) and excluded (PRS-NO-M5B) the MUC5B region (500-kb window around rs35705950-T) using an IPF genome-wide association study. We assessed PRS associations with area under the receiver operating characteristic curve (AUC) metrics for IPF, ILA, and ILA progression. Measurements and Main Results: We included 14,650 participants (1,970 IPF; 1,068 ILA) from six multi-ancestry population-based and case-control cohorts. In cases excluded from genome-wide association study, the PRS-M5B (odds ratio [OR] per SD of the score, 3.1; P = 7.1 × 10-95) and PRS-NO-M5B (OR per SD, 2.8; P = 2.5 × 10-87) were associated with IPF. Participants in the top PRS-NO-M5B quintile had ∼sevenfold odds for IPF compared with those in the first quintile. A clinical model predicted IPF (AUC, 0.61); rs35705950-T and PRS-NO-M5B demonstrated higher AUCs (0.73 and 0.7, respectively), and adding both genetic predictors to a clinical model yielded the highest performance (AUC, 0.81). The PRS-NO-M5B was associated with ILA (OR, 1.25) and ILA progression (OR, 1.16) in European ancestry participants. Conclusions: A common genetic variant risk score complements the MUC5B variant to identify individuals at high risk of interstitial lung abnormalities and pulmonary fibrosis.

Synergistic combination of cytotoxic chemotherapy and cyclin-dependent kinase 4/6 inhibitors in biliary tract cancers.

BACKGROUND AND AIMS: Biliary tract cancers (BTCs) are uncommon, but highly lethal, gastrointestinal malignancies. Gemcitabine/cisplatin is a standard-of-care systemic therapy, but has a modest impact on survival and harbors toxicities, including myelosuppression, nephropathy, neuropathy, and ototoxicity. Whereas BTCs are characterized by aberrations activating the cyclinD1/cyclin-dependent kinase (CDK)4/6/CDK inhibitor 2a/retinoblastoma pathway, clinical use of CDK4/6 inhibitors as monotherapy is limited by lack of validated biomarkers, diffident preclinical efficacy, and development of acquired drug resistance. Emerging studies have explored therapeutic strategies to enhance the antitumor efficacy of CDK4/6 inhibitors by the combination with chemotherapy regimens, but their mechanism of action remains elusive. APPROACH AND RESULTS: Here, we report in vitro and in vivo synergy in BTC models, showing enhanced efficacy, reduced toxicity, and better survival with a combination comprising gemcitabine/cisplatin and CDK4/6 inhibitors. Furthermore, we demonstrated that abemaciclib monotherapy had only modest efficacy attributable to autophagy-induced resistance. Notably, triplet therapy was able to potentiate efficacy through elimination of the autophagic flux. Correspondingly, abemaciclib potentiated ribonucleotide reductase catalytic subunit M1 reduction, resulting in sensitization to gemcitabine. CONCLUSIONS: As such, these data provide robust preclinical mechanistic evidence of synergy between gemcitabine/cisplatin and CDK4/6 inhibitors and delineate a path forward for translation of these findings to preliminary clinical studies in advanced BTC patients.

Temporal soliton dynamics of synchronised ultrafast fibre lasers.

Synchronised ultrafast soliton lasers have attracted great research interest in recent decades. However, there is a lack of comprehensive understanding regarding the buildup mechanism of synchronised pulses. Here, we report a dynamic analysis of independent and synchronised solitons buildup mechanisms in synchronised ultrafast soliton lasers. The laser comprises an erbium-doped fibre cavity and a thulium-doped fibre cavity bridged with a common arm. Pulses operating at two different wavelengths formed in the cavities are synchronised by cross-phase modulation-induced soliton correlation in the common fibre arm. We find that the whole buildup process of the thulium-doped fibre laser successively undergoes five different stages: continuous wave, relaxation oscillation, quasi-mode-locking, continuous wave mode-locking and synchronised mode-locking. It is found that the starting time of the synchronised solitons is mainly determined by the meeting time of dual-color solitons. Our results will further deepen the understanding of dual-color synchronised lasers and enrich the study of complex nonlinear system dynamics.

Highly efficient nonlinear vortex beam generation by using a compact nonlinear fork grating.

Vortex beams with an orbital angular momentum (OAM) are extremely important in optical trapping, optical micromachining, high-capacity optical communications, and quantum optics. Nonlinear generation of such a vortex beam enables vortex beams to be obtained at new wavelengths, which opens up new possibilities for all-optical switching and manipulation of vortex beams. However, previous nonlinear vortex beam generation suffers from either low efficiency or low-level integration. Here, we use the technique of ultraviolet photolithography-assisted inductively coupled plasma (ICP) etching to realize a compact nonlinear fork grating for high-efficiency nonlinear vortex beam generation. In our experiment, the depth of such a compact nonlinear fork-grating structure can be precisely controlled by etching time. The vortex beams with a topological charge of l = ±1, ± 2, ± 3 can be generated in the far field, and the normalized nonlinear conversion efficiency of such nonlinear vortex beam is 189% W-1cm-2. Our method not only provides an efficient and compact method for nonlinear vortex beam manipulation but also suits for timesaving and large-area nonlinear functional device fabrication.

High-speed optical pulse shaping based on programmable lithium niobate spatial light modulators.

Pulse shaping plays a key role in various applications of ultrafast lasers, such as optical communications, laser micromachining, microscopy, and quantum coherent control. Conventional pulse shaping devices based on liquid crystal spatial light modulators (LCSLMs) or digital micromirror devices (DMDs) only have the shaping speed of several hertz to kilohertz, which is not suitable for applications requiring a high-speed response. Here, we demonstrate a high-speed programmable lithium niobate spatial light modulator (LNSLM) with 128 individual modulation channels and a modulation speed that can reach 1 MHz. Then we establish a high-speed LNSLM-based Fourier-transform (FT) pulse shaper to realize high-speed pulse shaping, and the update rate can reach 350 kHz, only limited by the electric circuit. The proposed high-speed pulse shaper scheme opens new avenues for future applications of ultrafast science, such as microscopic imaging, interaction between light and matter, and spectroscopy.

Near-infrared speckle wavemeter based on nonlinear frequency conversion.

The wavemeter is an important instrument for spectrum analysis, widely used in spectral calibration, remote sensing, atomic physics, and high-precision metrology. However, near-infrared (NIR) wavemeters require infrared-sensitive detectors that are expensive and less sensitive compared to silicon-based visible light detectors. To circumvent these limitations, we propose an NIR speckle wavemeter based on nonlinear frequency conversion. We combine a scattering medium and the deep learning technique to invert the nonlinear mapping of the NIR wavelength and speckles in the visible wave band. With the outstanding performance of deep learning, a high-precision wavelength resolution of 1 pm is achievable in our experiment. We further demonstrate the robustness of our system and show that the recognition of power parameters and multi-spectral lines is also feasible. The proposed method offers a convenient and flexible way to measure NIR light, and it offers the possibility of cost reduction in miniaturized wavemeter systems.

Broadband second-harmonic generation in an angle-cut lithium niobate-on-insulator waveguide by a temperature gradient.

Frequency conversion via nonlinear wave mixing is an important technology to broaden the spectral range of lasers, propelling their applications in optical communication, spectroscopy, signal processing, and quantum information. Many applications require not only a high conversion efficiency but also a broad phase matching bandwidth. Here, we demonstrate broadband birefringence phase matching (BPM) second-harmonic generation (SHG) in angle-cut lithium niobate-on-insulator (LNOI) ridge waveguides based on a temperature gradient scheme. The bandwidth and shift of the phase matching spectrum can be effectively tuned by controlling the temperature gradient of the waveguide. Broadband SHG of a telecom C-band femtosecond laser is also demonstrated. The approach may open a new avenue for tunable broadband nonlinear frequency conversion in various integrated photonics platforms.

Large quality factor enhancement based on cascaded uniform lithium niobate bichromatic photonic crystal cavities.

In this Letter, by cascading several bichromatic photonic crystals we demonstrate that the quality factor can be much larger compared with that in an isolated cavity without increasing the total size of a device. We take a lithium niobate photonic crystal as an example to illustrate that the simulated quality factor of the cascaded cavity can reach 105 with a 70° slant angle, which is an order of magnitude larger than that in an isolated cavity. The device can be fabricated easily by current etching techniques for lithium niobate. We have fabricated the proposed device experimentally including holes with ∼70° slant angle. This work is expected to provide guidance to the design of photonic crystal cavities with high quality factor.

Controllable EIT-like mode splitting in a chiral microcavity.

Two coupled resonance modes can lead to exotic transmission spectra due to internal interference processes. Examples include electromagnetically induced transparency (EIT) in atoms and mode splitting in optics. The ability to control individual modes plays a crucial role in controlling such transmission spectra for practical applications. Here we experimentally demonstrate a controllable EIT-like mode splitting in a single microcavity using a double-port excitation. The mode splitting caused by internal coupling between two counter-propagating resonances can be effectively controlled by varying the power of the two inputs, as well as their relative phase. Moreover, the presence of asymmetric scattering in the microcavity leads to chiral behaviors in the mode splitting in the two propagating directions, manifesting itself in terms of a Fano-like resonance mode. These results may offer a compact platform for a tunable device in all-optical information processing.

Moiré Lattice in One-Dimensional Synthetic Frequency Dimension.

The moiré lattice has recently attracted broad interest in both solid-state physics and photonics where exotic phenomena in manipulating the quantum states are explored. In this work, we study the one-dimensional (1D) analogs of "moiré" lattices in a synthetic frequency dimension constructed by coupling two resonantly modulated ring resonators with different lengths. Unique features associated with the flatband manipulation as well as the flexible control of localization position inside each unit cell in the frequency dimension have been found, which can be controlled via the choice of flatband. Our work therefore provides insight into simulating moiré physics in 1D synthetic frequency space, which holds important promise for potential applications toward optical information processing.

Surface-Stabilized CsPbI3 Nanocrystals with Tailored Organic Polymer Ligand Binding.

Perovskite nanocrystals (NCs) exhibit attractive photophysical properties by combining the excellent optoelectronic properties of bulk perovskites with the strong quantum confinement effect at the nanoscale. However, CsPbI3 NCs easily transform into a non-perovskite phase because of the ionic lattice and dynamic ligand binding. Herein, stable black-phase CsPbI3 NCs capped with a new organic ligand, HO-PS-N3 (HOPS), which consists of a polystyrene segment with hydroxyl and azide end groups, are reported. This organic polymer ligand passivated the surface defects and enhanced the stability of CsPbI3 NCs by exposing the linking hydrophobic polystyrene segment. Consequently, the optimized CsPbI3 NCs exhibit significantly improved resistance to moisture or light and maintained 70 % of the original luminous intensity after immersion in water for two months. The theoretical results revealed that the binding energy of the HOPS ligand on the surface of the CsPbI3 NCs is higher than that of the commonly used oleic acid, alleviating the defects-induced degradation during purification. Thus, surface-stabilized CsPbI3 NCs are beneficial for a broad range of optoelectronic applications.