RESUMEN
Surface barriers to mass transfer in various nanoporous materials have been increasingly identified. These past few years especially, a significant impact on catalysis and separations has come to light. Broadly speaking, there are two types of barriers: internal barriers, which affect intraparticle diffusion, and external barriers, which determine the uptake and release rates of molecules into and out of the material. Here, we review the literature on surface barriers to mass transfer in nanoporous materials and describe how the existence and influence of surface barriers has been characterized, aided by molecular simulations and experimental measurements. As this is a complex, evolving research topic, without consensus from the scientific community at the time of writing, we present various current viewpoints, not always in agreement, on the origin, nature, and function of such barriers in catalysis and separation. We also emphasize the need for considering all the elementary steps of the mass transfer process in optimally designing new nanoporous and hierarchically structured adsorbents and catalysts.
RESUMEN
Ammonia borane (AB) with 19.6â wt % H2 content is widely considered a safe and efficient medium for H2 storage and release. Co-based nanocatalysts present strong contenders for replacing precious metal-based catalysts in AB hydrolysis due to their high activity and cost-effectiveness. However, precisely adjusting the active centers and surface properties of Co-based nanomaterials to enhance their activity, as well as suppressing the migration and loss of metal atoms to improve their stability, presents many challenges. In this study, mesoporous-silica-confined bimetallic Co-Cu nanoparticles embedded in nitrogen-doped carbon (CoxCu1-x@NC@mSiO2) were synthesized using a facile mSiO2-confined thermal pyrolysis strategy. The obtained product, an optimized Co0.8Cu0.2@NC@mSiO2 catalyst, exhibits enhanced performance with a turnover frequency of 240.9â molH2 â molmetal â min-1 for AB hydrolysis at 298â K, surpassing most noble-metal-free catalysts. Moreover, Co0.8Cu0.2@NC@mSiO2 demonstrates magnetic recyclability and extraordinary stability, with a negligible decline of only 0.8 % over 30â cycles of use. This enhanced performance was attributed to the synergistic effect between Co and Cu, as well as silica confinement. This work proposes a promising method for constructing noble-metal-free catalysts for AB hydrolysis.
RESUMEN
Ammonia borane (AB) is a promising material for chemical H2 storage owing to its high H2 density (up to 19.6â wt %). However, the development of an efficient catalyst for driving H2 evolution through AB hydrolysis remains challenging. Therefore, a visible-light-driven strategy for generating H2 through AB hydrolysis was implemented in this study using Ni-Pt nanoparticles supported on phosphorus-doped TiO2 (Ni-Pt/P-TiO2 ) as photocatalysts. Through surface engineering, P-TiO2 was prepared by phytic-acid-assisted phosphorization and then employed as an ideal support for immobilizing Ni-Pt nanoparticles via a facile co-reduction strategy. Under visible-light irradiation at 283â K, Ni40 Pt60 /P-TiO2 exhibited improved recyclability and a high turnover frequency of 967.8â mol H 2 ${{_{{\rm H}{_{2}}}}}$ molPt -1 min-1 . Characterization experiments and density functional theory calculations indicated that the enhanced performance of Ni40 Pt60 /P-TiO2 originated from a combination of the Ni-Pt alloying effect, the Mott-Schottky junction at the metal-semiconductor interface, and strong metal-support interactions. These findings not only underscore the benefits of utilizing multipronged effects to construct highly active AB-hydrolyzing catalysts, but also pave a path toward designing high-performance catalysts by surface engineering to modulate the electronic metal-support interactions for other visible-light-induced reactions.
RESUMEN
Nitrogen, phosphorus, and oxygen codoped carbon catalysts were successfully synthesized using dried yeast powder as a pyrolysis precursor. The yeast-derived heteroatom-doped carbon (yeast@C) catalysts exhibited outstanding performance in the oxidation of Csp3-H bonds to ketones and esters, giving excellent product yields (of up to 98% yield) without organic solvents at low O2 pressure (0.1 MPa). The catalytic oxidation protocol exhibited a broad range of substrates (38 examples) with good functional group tolerance, excellent regioselectivity, and synthetic utility. The yeast-derived heteroatom-doped carbon catalysts showed good reusability and stability after recycling six times without any significant loss of activity. Experimental results and DFT calculations proved the important role of N-oxide (N+-O-) on the surface of yeast@C and a reasonable carbon radical mechanism.
Asunto(s)
Nitrógeno , Levadura Seca , Carbono/química , Catálisis , Nitrógeno/química , Oxígeno , Fósforo , Saccharomyces cerevisiaeRESUMEN
A selective CO evolution from photoreduction of CO2 in water was achieved on a noble-metal-free, carbide-based composite catalyst, as demonstrated by a CO selectivity of 98.3% among all carbon-containing products and a CO evolution rate of 29.2 µmol h-1, showing superiority to noble-metal-based catalyst. A rapid separation of the photogenerated electron-hole pairs and improved CO2 adsorption on the surface of the carbide component are responsible for the excellent performance of the catalyst. The high CO selectivity is accompanied by a predominant H2 evolution, which is believed to provide a proton-deficient environment around the catalyst to favor the formation of hydrogen-deficient carbon products. The present work provides general insights into the design of a catalyst with a high product selectivity and also the carbon evolution chemistry during a photocatalytic reaction.
RESUMEN
An alkali-assisted cooperative assembly process of two different templating systems with aluminosilicate precursors is described. A highly ordered mesoporous zeolite with the 2D hexagonal symmetry mesospores and MFI zeolitic framework walls is synthesized. This method also allows the preparation of ZSM-5 with c- or b-axis-aligned mesopores. The materials have promising catalytic activities for organic reactions involving bulky molecules.
RESUMEN
This communication describes the fabrication of Pt/CeO2 nanotube@SiO2 core-shell catalysts applied to highly efficient water-gas shift reaction, where the initial CO conversion is 30.2% at 250 °C. Pt/CeO2 nanotube@SiO2 core-shell catalysts show outstanding thermal stability, even after accelerated aging under reaction conditions at 450 °C for 6 h, and the morphology is also unchanged after thermal treatment at 800 °C.
Asunto(s)
Cerio/química , Nanotubos/química , Platino (Metal)/química , Dióxido de Silicio/química , Catálisis , Calor , Microscopía Electrónica de Transmisión , Nanotubos/ultraestructura , Povidona/químicaRESUMEN
In this work, density functional theory (DFT) was employed to investigate the reaction pathways of ß-D-glucopyranose for better understanding the pyrolysis mechanism of cellulose in hydrogen plasma. Many possible reactions were considered, and the reaction enthalpies and activation energies of these reactions were calculated using density functional theory (DFT) with a Gaussian method of B3LYP and basic set of 6-31G(d,p). A most possible reaction pathway was brought up. According to this reaction pathway, the main products of cellulose pyrolysis in hydrogen plasma would be syngas, and few light hydrocarbons. CO mainly comes from the decomposition of aldehyde group, while H2 mainly comes from dehydrogenation processes. Active H in plasma are found to play a very important role in many reactions, and they can remarkably lower the energies needed for reactions.