Selective 'in synthesis' labeling of peptides with biotin and rhodamine.

A new method is described for the selective 'in synthesis' labeling of peptides by rhodamine or biotin at a single, predetermined epsilon-amino group of a lysine residue. The alpha-amino group and other lysyl residues of the peptide remain unmodified. Peptides are assembled by the Fmoc approach, which requires mild operative conditions for the final deprotection and cleavage, and ensures little damage of the reporter group. The labeling technique involves the previous preparation of a suitable Lysine derivative, easily obtained from commercially-available protected amino acids. This new derivative, where the reporter group (biotin, or rhodamine) acts now as permanent protection of lysyl side chain functions, is then inserted into the synthesis program as a conventional protected amino acid, and linked to the preceding residue by aid of carbodiimide. A simpler, alternative method is also described for the selective 'in synthesis' labeling of peptides with N-terminal lysyl residues. Several applications of labeled peptides are reported.

Specific recognition of human pi glutathione transferase by an antipeptide antibody.

Antibodies were raised in a rabbit by using a 12-residue synthetic peptide, corresponding to fragment 2-13 of rat placental glutathione S-transferase, as the immunogen. The antiserum appeared to react with the fragment as well as with the corresponding human enzyme (GST-pi), which shares with the rat transferase a 92% sequence homology at the N terminus. In addition, the binding of the antibody to the protein was completely inhibited by small amounts of peptide. The enzymatic activity of glutathione transferase was not affected by the antibody. This might indicate that the N-terminal fragment is not involved in the catalytic activity of the enzyme. This antibody of predetermined specificity might thus find a useful application for the detection and approximate quantitation of this marker in human preneoplastic lesions.

Selective 'in synthesis' labelling of peptides by fluorochromes.

A new method is described for producing fluorescently-tagged peptides containing specific internal derivatives of lysyl residues. The technique employs the base-labile Boc-Lys(Fmoc)-COOH derivative with base-catalyzed removal of the Fmoc protecting group during peptide synthesis and subsequent fluorescent derivatization of the deprotected epsilon-amino group of lysine. By this technique, other lysine residues and the alpha-amino group of the fragment remain unmodified, which could have some value in studies where it might be required to tag a single individual lysine residue within the peptide, but not the amino terminus. In spite of the fact that poly-substituted peptides are badly soluble and might seldom find a practical application, this technique also allows the introduction of different fluorochromes at different lysyl residues within the peptide, thus obtaining double fluorescence. The method, fast and easy, requires a limited number of manual operations during the automatic synthesis of peptides. Although peptide synthesizers provided with an oscillating glass reactor are more suitable for the manual interventions described, this technique might be also adapted to the newer instruments utilizing continuous-flow columns.

Preparation and utilization of fluorescent synthetic peptides.

In this study, several methods for controlled labelling of synthetic peptides by the use of fluorescent compounds (fluorescein isothiocyanate and dimethylaminonaphthalene sulfonyl chloride) were investigated. The first reagent yielded monofluoresceinated, active compounds only when the peptides lacked lysine residues. Monolabelling of peptides in solution with dimethylaminonaphthalenesulphonyl chloride was hindered by the broad reactivity of the reagent, but was achieved by reacting the fluorochrome on protected resin-bound peptides in solid-phase synthesis. The remarkable stability of the linkage allowed the cleavage of the peptide from the resin and deprotection of side-chain functions without hydrolysis of the labelled group. The binding of antipeptide antibodies to the labelled fragments was then estimated using different techniques.

HLA-DQA1 and DQB1 gene polymorphisms in type I diabetic patients from central Italy and their use for risk prediction.

Susceptibility to type I diabetes has been shown to be highly correlated with the presence of an amino acid other than Asp at position 57 of the DQ beta-chain (non-Asp57) and also with the presence of an Arg at position 52 of the DQ alpha-chain (Arg52). In this study we analyzed the DQA1 and DQB1 gene polymorphisms in 65 patients from central Italy and 93 randomly selected control subjects. Polymerase chain reaction amplification of DNA encoding the first polymorphic domain of the DQB1 and DQA1 chains was performed, and DQB1 gene polymorphism was evaluated by dot blot analysis using 11 sequence-specific oligonucleotide probes. For DQA1 typing, a new simple procedure based on allele-specific amplification and analysis of heteroduplex DNA molecules formed by the annealing of mismatched allelic strands was used. This technique allows the discrimination of Arg52 and non-Arg52 DQA1 alleles. We then calculated by logistic regression the contribution of these genetic markers to the development of diabetes. Frequencies and odds ratios relative to the amino acid in position 57 of the DQ beta-chain and the amino acid in position 52 of the DQ alpha-chain showed that the highest odds ratio (odds ratio = 161; 95% confidence interval 19-1386) was that of the homozygous combination of the two susceptibility markers (non-Asp57 and Arg52).(ABSTRACT TRUNCATED AT 250 WORDS)

Immunologic and functional characterization of anti-HLA-DR rabbit antibodies induced by synthetic peptides.

Three peptides selected from the amino acid sequence of the alpha- and beta-chains of DR2 histocompatibility antigens were chemically synthesized and coupled to carrier proteins to be used as immunogens in rabbits. This immunization resulted in the production of specific antibodies that readily recognized the antigen. However, only one of the four antibody preparations, antibody 6148, elicited by a short peptide from the beta-chain (residues 61-73), reacts with native membrane glycoproteins as well as intact human lymphoblastoid cells in enzyme-linked immunosorbant assays. This antibody was found to react also with membrane glycoproteins solubilized by nonionic detergents from cells bearing a different HLA-DR specificity: therefore it is likely that the peptide responsible for eliciting antibody 6148 represents a common framework determinant of DR alloantigens that is accessible on the surface of lymphoblastoid cells. The ability of antibody 6148 to bind to intact cells was confirmed by indirect immunofluorescence and by fluorescein-activated cell sorter analysis. This antibody is also capable of mediating antibody-dependent cellular cytotoxicity as determined by a 51Cr-release assay.

Restriction of anti-peptide antibody specificity by enzyme-modified Sepharose-peptide immunoadsorbents.

Sepharose-peptide immunoadsorbents, employed for the isolation of specific antibodies from the sera of rabbits immunized with carrier protein-peptide conjugates, were digested with suitable proteolytic enzymes, in order to obtain the splitting of a part of the peptide bound to the gel. This new modified immunoadsorbent can be advantageously used for the isolation of antibody subsets, that do not cross-react with related peptides exhibiting high sequence homology with the immunogens.

Preparation and properties of gel-peptide immunoadsorbents.

The chemical complexity of peptides limits the choice of coupling procedures which can be used in the preparation of gel-peptide conjugates. Several immunoadsorbents have been investigated, in order to select those that permit the isolation of antipeptide antibodies in the highest yield and with optimal specific activity.

14C-labeling of synthetic peptides.

Two methods are described for the labeling of synthetic peptides using iodo[14C]acetic acid. The first procedure may be employed when the synthetic fragment contains a cysteine with a free sulfhydryl group. Alternatively, a commercial amino-protected cysteine may be carboxymethylated using radioactive iodoacetic acid. This derivative can be added to the growing peptide chain in the manual or automatic solid-phase synthesis of the fragment.

Global immune disregulation in multiple sclerosis: from the adaptive response to the innate immunity.

Increasing evidences show a global immune disregulation in multiple sclerosis (MS). The possible involvement of myelin and non-myelin (auto-)antigens in the autoaggressive process as well as the disregulation of both adaptive and innate immunity challenge the concept of specific immunotherapy. T cells at the boundary between innate and adaptive immunity, whose immunoregulatory role is becoming increasingly clear, have recently been shown to bear relevance for MS pathogenesis. Global immune interventions (and type I interferons may be considered as such) aimed at interfering with both innate and acquired immune responses seem to be a most promising therapeutic option in MS.

The antigen-specific induction of normal human lymphocytes in vitro is down-regulated by a conserved HIV p24 epitope.

Synthetic peptides containing amino acid sequence 218-238 of the core protein p24 of human immunodeficiency virus type 1 (HIV-1) and progressively shorter sequences at its C-terminus, were tested for their effect on antigen dependent in vitro responses of peripheral blood lymphocytes (PBL) from normal human donors. A peptide as short as 7 amino acids, corresponding to a highly conserved sequence, was able to inhibit in a dose-dependent manner the induction of a specific primary antibody response to the sheep red cell (SRC) antigen, as well as the proliferative response to recall microbial antigens. The results of this study constitute additional evidence of the immunoinhibitory effects of HIV components and may help to unravel some of the pathogenic mechanisms of AIDS. Moreover, they are of potential relevance for the development of immunoprophylactic and therapeutic strategies.

Polystyrene beads coated with antibodies directed to HLA class I intracytoplasmic domain: the use in quantitative measurement of peptide-HLA class I binding by flow cytometry.

Protein-reactive, conformation-independent anti-peptide antibodies were raised in rabbits against a C-terminal sequence SDSAQGSDVSLA, common to most HLA-A and -B locus products. Antibodies were coupled to 4.5-microm polystyrene beads through the Fc portion by the use of protein A. The antibody-coupled beads showed a high capacity to bind HLA-A and -B proteins as well as their alpha chains by the intracytoplasmic domain, keeping the extracellular domains solvent exposed. The density of HLA class I proteins bound on the beads was approximately the same as that on cultured B cells. The antibody beads made it possible to quantitate peptide-HLA class I binding, i.e., in vitro HLA class I assembly by flow cytometry. The assembly rate determined by the provisionally called flow cytometric HLA class I assay was 15%-19% for the reassembly of dissociated HLA class I proteins with the released selfpeptides. With single synthetic peptides, the highest rate so far obtained was 6.5%. The assay specificity and reproducibility were satisfactory.

Allele- and temperature-dependency of in vitro HLA class I assembly.

Allelic variations of in vitro HLA class I assembly have been investigated in both the absence and the presence of binding peptides by flow cytometry using human leukocyte antigen (HLA) class I alpha chains isolated by alkali treatment from cultured HLA homozygous B cells and polystyrene beads coated with anti-HLA class I alpha chain antibodies specific to the C-terminal segment (anti-HLA class I beads). The specificity of assembly was temperature dependent, while the stability of the assembled complex depended on the bound peptide. The efficiency of assembly was allele dependent and primarily ruled by the binding affinity of alpha chains with beta(2)m. Thus, an allele hierarchy could be defined for the binding of HLA-B alpha chain with beta(2)-microglobulin: B7, B18 > B35, B62 > B27, B51. Allele and temperature dependency was found in HLA class I reassembly on acid treated B cells. The HLA class I proteins, reassembled with specific single peptides, could be efficiently transferred to anti-HLA class I beads. These findings would be used to produce microspheres coupled at high surface density with oriented single-peptide loaded HLA class I molecules and also to improve the preparation efficiency of HLA class I tetramers by the use of site-specific biotinylation.

Unfolded HLA class I alpha chains and their use in an assay of HLA class-I-peptide binding.

Unfolded HLA class I alpha chains were isolated from B-cell lysates by alkaline denaturation and subsequent gel filtration and used for the detection of HLA class-I-peptide binding. Binding to specific peptides in the presence of excess beta 2-microglobulin induced the unfolded alpha chains to refold and acquire a conformation that is specific to folded alpha chains. This conformational change was measured by a specific RIA that involves inhibition of the binding of 125I-labeled HLA-A2 alpha/beta dimers and rabbit anti-HLA-B7 serum absorbed with beta 2-microglobulin. This assay procedure does not require labeling of either test peptides or test class I proteins and does not seem to have specificity degeneracy. It is applicable to the detection of peptide binding by all HLA class I allelic proteins. Evaluation of the assay conditions and HLA allelic specificity of the peptide binding defined by the use of synthetic peptides are described here, including the technical details, specificity, and reproducibility.

HLA-A2-binding peptides cross-react not only within the A2 subgroup but also with other HLA-A-locus allelic products.

Seven A2-binding peptides were tested by the HLA class I alpha-chain refolding assay previously described for their direct binding to HLA class I alpha chains derived from a panel of 18 HLA-homozygous B-cell lines of various HLA specificities, including four A2 subtypes: A*0201, A*0204, A*0205, and A*0206. All but one test peptide possessed the major anchor residue motifs, L-V, L-L, or I-L, of A2(A*0201)/A2(A*0205)-binding peptides or the closely related motifs, I-V or V-V. This cell panel analysis confirmed the high A2 allele specificity of the test peptides, but also revealed the existence of a broad cross-binding within the A2 subgroup. Most peptides bound to the alpha chains of the A2 subtypes tested, although their binding patterns showed differences. Furthermore, the A2-binding peptides carrying the I-V or V-V motif were found to cross-react also outside of the A2 subtypes, probably with A24, A26, A28, and A29. Other A-locus allelic products, A1, A3, A11, A30, and A31, and the B-locus allelic products carried by the cells tested were essentially negative, although a few exceptions were seen.

Anchor residue motifs of HLA class-I-binding peptides analyzed by the direct binding of synthetic peptides to HLA class I alpha chains.

The binding characteristics of the primary anchor residue motifs reported for HLA-A2 (A*0201, A*0205) and HLA-B27 (B*2705) alleles were investigated by a direct binding assay of the pertinent synthetic peptides to HLA class I alpha chains derived from a panel of HLA homozygous B-cell lines of various HLA phenotypes, including four A2 subtypes. The assay is based on a serologic detection of the conformational change of HLA class I alpha chains induced by binding to specific peptides in the presence of beta 2m. It is applicable to test a large number of HLA allelic products and synthetic peptides. Assay data confirmed the high allele specificity of the anchor residue motifs tested, but also revealed the intra- and interlocus cross-reactivity of these motifs. In the case of A2 anchor motifs, not only a broad cross-reactivity within the A2 subgroup, but also cross-reactivities with A24, A26, A28, and A29 were observed. With B27 anchor motifs, an interlocus cross-reactivity with A3 and A31 was seen. Several peptides, even though they carried A2 or B27 major anchor residue motifs, failed to bind to the relevant alpha chains, suggesting that the presence of a primary anchor residue motif is necessary for HLA class-I-peptide binding but is not by itself sufficient to guarantee binding.

Short synthetic peptides derived from viral proteins compete with HIV gp120 for the binding to CD4 receptors.

In the complex mechanism of adhesion, internalization, and infection of cells by human immunodeficiency virus (HIV) viral particles, a determinant role is played by the viral envelope glycoprotein gp120, which binds to CD4 receptors of T cells and monocytes. We tested the ability of a panel of 7- to 12-residue synthetic peptides, selected from the region 414-434 of the HIV-1 gp120, to inhibit the binding of the viral protein to CD4 receptors of cultured human lymphoid cells. The assay was based on the observation that the binding of gp120 to the receptors interferes with the binding of a specific anti-CD4 monoclonal antibody, as a result of the masking of the antibody epitope; thus, we tested whether preincubation of cells with the peptides before gp120 addition might restore the recognition of the CD4 molecule by the antibody. High expression of CD4 receptors was thus assumed as indication that the binding of the viral protein had been inhibited. Maximum activity was displayed by a 9-residue peptide located near the amino terminal end of the 414-434 fragment. In addition, several fragments deduced from other viral proteins, possessing partial amino acid sequence homology with the HIV gp120 fragment, exhibited a similar type of interaction with the CD4 receptor. All active peptides contain the Cys residue (position 423 of gp120). This residue is essential, although not sufficient, for inhibiting gp120 binding, as few other amino acid residues within the fragment play a complementary role in increasing or decreasing the inhibitory ability.

Differential denaturation of a crystalline Bence-Jones type cryoprotein as monitored by fluorescence.

1) A Bence-Jones type protein (Cryo-Ver) showing the cold precipitation phenomenon has an extremely low intrinsic fluorescence when excited at 280-295 nm. 2) This fluorescence increases considerably upon denaturation of the molecule by heat or guanidine hydrochloride. Guanidine is about twice as effective as heat in terms of fluorescence yield. 3) The heat-denatured protein is still reactive with anti-cryoVer antibodies, at variance with the guanidine-treated samples. 4) Since the protein contains two tryptophans per mole, one in the constant portion of the molecule, the other in the variable region, it is proposed that heat treatment affects only the variable region, which seems involved in the cryoprecipitation phenomenon.

Cellular mechanisms of artificial peptides binding to HLA.

On the basis of the consideration that cell-free models cannot precisely mimic the complexity of the intracellular environment, we used a system to investigate the mechanisms that enable antigen-presenting cells (APC) to bind exogenous peptides through their human leukocyte antigen (HLA) molecules. We evaluated the uptake of the radiolabeled peptide 17-29-Tyr of influenza virus matrix protein by B-EBV cell lines, under various conditions. The results can be summarized as follows: a) the kinetics of peptide binding and release are very fast in living, fully competent cells; b) the peptide-HLA complexes are short-living and the DR molecules continuously undergo peptidic exchange; c) using glutaraldehyde-fixed cells, the kinetics of the two phenomena are slow, closely resembling those observed with the same peptide and purified, immobilized DR molecules. The data suggest that in APC, cellular mechanisms are operative that increase the efficiency of both loading and unloading of Class II HLA with exogenous peptides. This is likely to be related to the recycling of Class II molecules to intracellular compartments, were binding takes place. The observation that the HLA-peptide complex is a dynamic structure, suggests the possibility of replacing natural peptides with synthetic ones at this level, in order to regulate the immune response.

Flexibility of amino acid residues at position four of nonapeptides enhances their binding to human leucocyte antigen (HLA) molecules.

The binding affinity of synthetic nonapeptides to human leucocyte antigens (HLA) molecules of the A0201 allotype, the most common in Caucasian, is enhanced or reduced by suitable amino acid substitutions at position 4, as a result of increased or decreased chain flexibility. A higher flexibility of the bond at this position correlates with an easier accommodation of the fragment into the HLA groove, while rigidity of the peptide chain appears to interfere. These data are based on two lines of evidence: a) most natural high affinity ligands for HLA-A0201 possess, at position 4, flexible residues b) substitutions of such residues by rigid amino acids results in a decrease of binding affinity.