Myosin turnover controls actomyosin contractile instability.

Actomyosin contractile force produced by myosin II molecules that bind and pull actin filaments is harnessed for diverse functions, from cell division by the cytokinetic contractile ring to morphogenesis driven by supracellular actomyosin networks during development. However, actomyosin contractility is intrinsically unstable to self-reinforcing spatial variations that may destroy the actomyosin architecture if unopposed. How cells control this threat is not established, and while large myosin fluctuations and punctateness are widely reported, the full course of the instability in cells has not been observed. Here, we observed the instability run its full course in isolated cytokinetic contractile rings in cell ghosts where component turnover processes are absent. Unprotected by turnover, myosin II merged hierarchically into aggregates with increasing amounts of myosin and increasing separation, up to a maximum separation. Molecularly explicit simulations reproduced the hierarchical aggregation which precipitated tension loss and ring fracture and identified the maximum separation as the length of actin filaments mediating mechanical communication between aggregates. In the final simulated dead-end state, aggregates were morphologically quiescent, including asters with polarity-sorted actin, similar to the dead-end state observed in actomyosin systems in vitro. Our results suggest the myosin II turnover time controls actomyosin contractile instability in normal cells, long enough for aggregation to build robust aggregates but sufficiently short to intercept catastrophic hierarchical aggregation and fracture.

Positioning cytokinesis.

Cytokinesis is the terminal step of the cell cycle during which a mother cell divides into daughter cells. Often, the machinery of cytokinesis is positioned in such a way that daughter cells are born roughly equal in size. However, in many specialized cell types or under certain environmental conditions, the cell division machinery is placed at nonmedial positions to produce daughter cells of different sizes and in many cases of different fates. Here we review the different mechanisms that position the division machinery in prokaryotic and eukaryotic cell types. We also describe cytokinesis-positioning mechanisms that are not adequately explained by studies in model organisms and model cell types.

The nuage mediates retrotransposon silencing in mouse primordial ovarian follicles.

Mobilization of endogenous retrotransposons can destabilize the genome, an imminent danger during epigenetic reprogramming of cells in the germline. The P-element-induced wimpy testis (PIWI)-interacting RNA (piRNA) pathway is known to silence retrotransposons in the mouse testes. Several piRNA pathway components localize to the unique, germline structure known as the nuage. In this study, we surveyed mouse ovaries and found, for the first time, transient appearance of nuage-like structures in oocytes of primordial follicles. Mouse vasa homolog (MVH), Piwi-like 2 (PIWIL2/MILI) and tudor domain-containing 9 (TDRD9) are present in these structures, whereas aggregates of germ cell protein with ankyrin repeats, sterile alpha motif and leucine zipper (GASZ) localize separately in the cytoplasm. Retrotransposons are silenced in primordial ovarian follicles, and de-repressed upon reduction of piRNA expression in Mvh, Mili or Gasz mutants. However, these null-mutant females, unlike their male counterparts, are fertile, uncoupling retrotransposon activation from sterility.

Protocol for the detection of mechanosensitive response of proteins in cultured cells under compressive stress.

Here, we present a protocol to detect mechanosensitive responses of proteins in cells under compressive stress. We describe steps for preparing elastic gels to compress cells grown on an imaging chamber. We then detail procedures for imaging proteins at the cell cortex using high-resolution confocal microscopy. The protocol can be applied to examine the mechanosensitive response of fluorescently tagged proteins in mitotic cells or round interphase cells adhering to the imaging surface. For complete details on the use and execution of this protocol, please refer to Wang et al.1.

Mechanosensitive accumulation of non-muscle myosin IIB during mitosis requires its translocation activity.

Non-muscle myosin II (NMII) is a force-generating mechanosensitive enzyme that responds to mechanical forces. NMIIs mechanoaccumulate at the cell cortex in response to mechanical forces. It is essential for cells to mechanically adapt to the physical environment, failure of which results in mitotic defects when dividing in confined environment. Much less is known about how NMII mechanoaccumulation is regulated during mitosis. We show that mitotic cells respond to compressive stress by promoting accumulation of active RhoA at the cell cortex as in interphase cells. RhoA mechanoresponse during mitosis activates and stabilizes NMIIB via ROCK signaling, leading to NMIIB mechanoaccumulation at the cell cortex. Using disease-related myosin II mutations, we found that NMIIB mechanoaccumulation requires its motor activity that translocates actin filaments, but not just its actin-binding function. Thus, the motor activity coordinates structural movement and nucleotide state changes to fine-tune actin-binding affinity optimal for NMIIs to generate and respond to forces.

Polarity determinants Tea1p, Tea4p, and Pom1p inhibit division-septum assembly at cell ends in fission yeast.

Correct positioning of the cell-division plane is crucial for cell function in all organisms. The fission yeast Schizosaccharomyces pombe divides by utilizing an actomyosin-based contractile ring and is an attractive model for the study of cytokinesis. The metazoan anillin-related protein Mid1p stimulates medial assembly of the division septum by recruiting actomyosin-ring components to the medial cortex. Here, we describe an inhibitory mechanism, involving the cell-end-localized polarity determinants Tea1p, Tea4p/Wsh3p, and Pom1p (tip complex), which prevents division-septum assembly at the cell ends. While Mid1p and the tip complex are dispensable for cell viability, their simultaneous loss leads to lethality. The FER/CIP homology protein Cdc15p, which organizes the actomyosin ring and cell membranes during cytokinesis, is a candidate for regulation by the tip complex. Since dual regulation of division-site placement is also seen in nematodes, such regulation might be a general feature of eukaryotic cytokinesis.

Modular protein engineering-based biomaterials for skeletal tissue engineering.

Biomaterials are indispensable for tissue engineering, which plays a pivotal role in the skeletal tissue repair. However, biomaterials currently used such as animal extracts and chemically synthesized polymers display unsatisfactory bioactivity and safety. In recent years, modular protein engineering-based (MPE) biomaterials composed of polypeptides produced by molecular cloning and protein synthesis have greatly developed due to their lower batch-to-batch variation, avoidance of possible pathogens and, most importantly, sequence-tunable property. In this review, we first briefly describe the properties of different MPE biomaterials classified by the structural domains of polypeptides, and techniques to engineer the polypeptide sequence and synthesize MPE biomaterials at will. Then, we focus on the application of bio-designed MPE biomaterials in skeletal tissue engineering. Different structural domains of polypeptides are used individually or covalently fused with different bioactive motifs to generate a variety of MPE biomaterials. The sequence (protein modules) of MPE biomaterials would determine and guide their cytocompatibility, their effects on cell fate and ECM formation, the mechanical properties and functions during the in vivo skeletal tissue repair. Moreover, we propose several bio-design strategies and potential directions to develop MPE biomaterials for better performing skeletal tissue engineering and to achieve fast skeletal tissue regeneration. Combinations of material science and protein engineering would provide solutions to the obstacles in regenerative medicine. This article provides a board review of skeletal tissue engineering in a polypeptide sequence-guided way by using MPE biomaterials.

Nuc2p, a subunit of the anaphase-promoting complex, inhibits septation initiation network following cytokinesis in fission yeast.

In most cell types, mitosis and cytokinesis are tightly coupled such that cytokinesis occurs only once per cell cycle. The fission yeast Schizosaccharomyces pombe divides using an actomyosin-based contractile ring and is an attractive model for the study of the links between mitosis and cytokinesis. In fission yeast, the anaphase-promoting complex/cyclosome (APC/C) and the septation initiation network (SIN), a spindle pole body (SPB)-associated GTPase-driven signaling cascade, function sequentially to ensure proper coordination of mitosis and cytokinesis. Here, we find a novel interplay between the tetratricopeptide repeat (TPR) domain-containing subunit of the APC/C, Nuc2p, and the SIN, that appears to not involve other subunits of the APC/C. Overproduction of Nuc2p led to an increase in the presence of multinucleated cells, which correlated with a defect in actomyosin ring maintenance and localization of the SIN component protein kinases Cdc7p and Sid1p to the SPBs, indicative of defective SIN signaling. Conversely, loss of Nuc2p function led to increased SIN signaling, characterized by the persistent localization of Cdc7p and Sid1p on SPBs and assembly of multiple actomyosin rings and division septa. Nuc2p appears to function independently of the checkpoint with FHA and ring finger (CHFR)-related protein Dma1p, a known inhibitor of the SIN in fission yeast. Genetic and biochemical analyses established that Nuc2p might influence the nucleotide state of Spg1p GTPase, a key regulator of the SIN. We propose that Nuc2p, by inhibiting the SIN after cell division, prevents further deleterious cytokinetic events, thereby contributing to genome stability.

A Preliminary Study on Retro-reconstruction of Cell Fission Dynamic Process using Convolutional LSTM Neural Networks.

Cell morphological analysis has great impact towards our understanding of cell biology. It is however technically challenging to acquire the complete process of cell cycles under microscope inspection. Using convolutional long short-term memory (ConvLSTM) networks, this paper proposes a comprehensive visualization method for cell cycles by retro-reconstruction of the preceding frames that are not captured. Results suggested that this method has the potential to overcome existing technical bottlenecks in image acquisition of cellular process and hence facilitate cell analysis.Clinical Relevance- This model allows back-tracing to complete the visualization of the cellular processes through a short segment of microscope-acquired cellular changes hence providing a starting point for exploring applications in predicting or backtracking unknown cellular processes.

Inhibition of cell membrane ingression at the division site by cell walls in fission yeast.

Eukaryotic cells assemble actomyosin rings during cytokinesis to function as force-generating machines to drive membrane invagination and to counteract the intracellular pressure and the cell surface tension. How the extracellular matrix affects actomyosin ring contraction has not been fully explored. While studying the Schizosaccharomyces pombe 1,3-ß-glucan-synthase mutant cps1-191, which is defective in division septum synthesis and arrests with a stable actomyosin ring, we found that weakening of the extracellular glycan matrix caused the generated spheroplasts to divide under the nonpermissive condition. This nonmedial slow division was dependent on a functional actomyosin ring and vesicular trafficking, but independent of normal septum synthesis. Interestingly, the high intracellular turgor pressure appears to play a minimal role in inhibiting ring contraction in the absence of cell wall remodeling in cps1-191 mutants, as decreasing the turgor pressure alone did not enable spheroplast division. We propose that during cytokinesis, the extracellular glycan matrix restricts actomyosin ring contraction and membrane ingression, and remodeling of the extracellular components through division septum synthesis relieves the inhibition and facilitates actomyosin ring contraction.

The novel fission yeast protein Pal1p interacts with Hip1-related Sla2p/End4p and is involved in cellular morphogenesis.

The establishment and maintenance of characteristic cellular morphologies is a fundamental property of all cells. Here we describe Schizosaccharomyces pombe Pal1p, a protein important for maintenance of cylindrical cellular morphology. Pal1p is a novel membrane-associated protein that localizes to the growing tips of interphase cells and to the division site in cells undergoing cytokinesis in an F-actin- and microtubule-independent manner. Cells deleted for pal1 display morphological defects, characterized by the occurrence of spherical and pear-shaped cells with an abnormal cell wall. Pal1p physically interacts and displays overlapping localization with the Huntingtin-interacting-protein (Hip1)-related protein Sla2p/End4p, which is also required for establishment of cylindrical cellular morphology. Sla2p is important for efficient localization of Pal1p to the sites of polarized growth and appears to function upstream of Pal1p. Interestingly, spherical pal1Delta mutants polarize to establish a pearlike morphology before mitosis in a manner dependent on the kelch-repeat protein Tea1p and the cell cycle inhibitory kinase Wee1p. Thus, overlapping mechanisms involving Pal1p, Tea1p, and Sla2p contribute to the establishment of cylindrical cellular morphology, which is important for proper spatial regulation of cytokinesis.

Equatorial Assembly of the Cell-Division Actomyosin Ring in the Absence of Cytokinetic Spatial Cues.

The position of the division site dictates the size and fate of daughter cells in many organisms. In animal cells, division-site placement involves overlapping mechanisms, including signaling from the central spindle microtubules, astral microtubules, and spindle poles and through polar contractions [1-3]. In fission yeast, division-site positioning requires overlapping mechanisms involving the anillin-related protein Mid1 and the tip complex (comprising the Kelch-repeat protein Tea1, the Dyrk-kinase Pom1, and the SH3-domain protein Tea4) [4-11]. In addition to these factors, cell shape has also been shown to participate in the maintenance of the position of the actomyosin ring [12-14]. The first principles guiding actomyosin ring placement, however, have not been elucidated in any organism. Because actomyosin ring positioning, ring assembly, and cell morphogenesis are genetically separable in fission yeast, we have used it to derive actomyosin ring placement mechanisms from first principles. We report that, during ring assembly in the absence of cytokinetic cues (anillin-related Mid1 and tip-complex proteins), actin bundles follow the path of least curvature and assemble actomyosin rings in an equatorial position in spherical protoplasts and along the long axis in cylindrical cells and compressed protoplasts. The equatorial position of rings is abolished upon treatment of protoplasts with an actin-severing compound or by slowing down actin polymerization. We propose that the physical properties of actin filaments/bundles play key roles in actomyosin ring assembly and positioning, and that key cytokinetic molecules may modulate the length of actin filaments to promote ring assembly along the short axis.

Motor Activity Dependent and Independent Functions of Myosin II Contribute to Actomyosin Ring Assembly and Contraction in Schizosaccharomyces pombe.

Cytokinesis depends on a contractile actomyosin ring in many eukaryotes [1-3]. Myosin II is a key component of the actomyosin ring, although whether it functions as a motor or as an actin cross-linker to exert its essential role is disputed [1, 4, 5]. In Schizosaccharomyces pombe, the myo2-E1 mutation affects the upper 50 kDa sub-domain of the myosin II heavy chain, and cells carrying this lethal mutation are defective in actomyosin ring assembly at the non-permissive temperature [6, 7]. myo2-E1 also affects actomyosin ring contraction when rings isolated from permissive temperature-grown cells are incubated with ATP [8]. Here we report isolation of a compensatory suppressor mutation in the lower 50 kDa sub-domain (myo2-E1-Sup1) that reverses the inability of myo2-E1 to form colonies at the restrictive temperature. myo2-E1-Sup1 is capable of assembling normal actomyosin rings, although rings isolated from myo2-E1-Sup1 are defective in ATP-dependent contraction in vitro. Furthermore, the product of myo2-E1-Sup1 does not translocate actin filaments in motility assays in vitro. Superimposition of myo2-E1 and myo2-E1-Sup1 on available rigor and blebbistatin-bound myosin II structures suggests that myo2-E1-Sup1 may represent a novel actin translocation-defective allele. Actomyosin ring contraction and viability of myo2-E1-Sup1 cells depend on the late cytokinetic S. pombe myosin II isoform, Myp2p, a non-essential protein that is normally dispensable for actomyosin ring assembly and contraction. Our work reveals that Myo2p may function in two different and essential modes during cytokinesis: a motor activity-independent form that can promote actomyosin ring assembly and a motor activity-dependent form that supports ring contraction.

Actin turnover maintains actin filament homeostasis during cytokinetic ring contraction.

Cytokinesis in many eukaryotes involves a tension-generating actomyosin-based contractile ring. Many components of actomyosin rings turn over during contraction, although the significance of this turnover has remained enigmatic. Here, using Schizosaccharomyces japonicus, we investigate the role of turnover of actin and myosin II in its contraction. Actomyosin ring components self-organize into ∼1-µm-spaced clusters instead of undergoing full-ring contraction in the absence of continuous actin polymerization. This effect is reversed when actin filaments are stabilized. We tested the idea that the function of turnover is to ensure actin filament homeostasis in a synthetic system, in which we abolished turnover by fixing rings in cell ghosts with formaldehyde. We found that these rings contracted fully upon exogenous addition of a vertebrate myosin. We conclude that actin turnover is required to maintain actin filament homeostasis during ring contraction and that the requirement for turnover can be bypassed if homeostasis is achieved artificially.

Isolation of Cytokinetic Actomyosin Rings from Saccharomyces cerevisiae and Schizosaccharomyces pombe.

Cytokinesis is the final stage of cell division, through which cellular constituents of mother cells are partitioned into two daughter cells resulting in the increase in cell number. In animal and fungal cells cytokinesis is mediated by an actomyosin contractile ring, which is attached to the overlying cell membrane. Contraction of this ring after chromosome segregation physically severs the mother cell into two daughters. Here we describe methods for the isolation and partial purification of the actomyosin ring from the fission yeast Schizosaccharomyces pombe and the budding yeast Saccharomyces cerevisiae, which can serve as in vitro systems to facilitate biochemical and ultrastructural analysis of cytokinesis in these genetically tractable model systems.

Curvature-induced expulsion of actomyosin bundles during cytokinetic ring contraction.

Many eukaryotes assemble a ring-shaped actomyosin network that contracts to drive cytokinesis. Unlike actomyosin in sarcomeres, which cycles through contraction and relaxation, the cytokinetic ring disassembles during contraction through an unknown mechanism. Here we find in Schizosaccharomyces japonicus and Schizosaccharomyces pombe that, during actomyosin ring contraction, actin filaments associated with actomyosin rings are expelled as micron-scale bundles containing multiple actomyosin ring proteins. Using functional isolated actomyosin rings we show that expulsion of actin bundles does not require continuous presence of cytoplasm. Strikingly, mechanical compression of actomyosin rings results in expulsion of bundles predominantly at regions of high curvature. Our work unprecedentedly reveals that the increased curvature of the ring itself promotes its disassembly. It is likely that such a curvature-induced mechanism may operate in disassembly of other contractile networks.

Characterization of the zebrafish vascular endothelial growth factor A gene: comparison with vegf-A genes in mammals and Fugu.

Vascular endothelial growth factor (VEGF-A) is a key angiogenic growth factor which regulates vertebrate embryonic vascularization, adult physiology such as wound healing and reproduction as well as many human diseases. To understand the evolution and regulation of this gene in vertebrates, we have isolated and characterized the zebrafish vegf-A gene and compared it with VEGF-A genes of human, mouse as well as an in silico isolated VEGF-A homologue from pufferfish. Our results indicate that the zebrafish vegf-A gene is organized similarly to mammalian and Fugu VEGF-A genes, with eight exons interrupted by seven introns. However, zebrafish vegf-A introns are generally larger than mammalian introns while Fugu VEGF-A introns are much smaller. Furthermore, zebrafish exon 6 (z6) has a unique sequence while Fugu's exon 6 is highly homologous to the mammalian counterparts. Alternative splicing generates multiple vegf-A mRNA isoforms in zebrafish with Vegf(121) as the dominant isoform in adult and Vegf(165) as the dominant isoform in early embryos. The exon z6 containing isoform Vegf(12345z678) is only detected in heart, muscle, and early embryos while another isoform Vegf-A(1234577)(a)(8) is only detected in heart. Furthermore, no conserved 5' flanking sequences between zebrafish and Fugu were observed while numerous conserved regions exist between human and mouse in this area. These results suggest both conserved and diverged functions of VEGF-A from fish to mammals since the separation of these two groups from their common ancestor about 450 million years ago and a diverged regulation of this gene since the separation of zebrafish from Fugu. These data will be valuable for future studies of VEGF-A gene regulation and function in different vertebrates.

A tudor domain protein SPINDLIN1 interacts with the mRNA-binding protein SERBP1 and is involved in mouse oocyte meiotic resumption.

Mammalian oocytes are arrested at prophase I of meiosis, and resume meiosis prior to ovulation. Coordination of meiotic arrest and resumption is partly dependent on the post-transcriptional regulation of maternal transcripts. Here, we report that, SPINDLIN1 (SPIN1), a maternal protein containing Tudor-like domains, interacts with a known mRNA-binding protein SERBP1, and is involved in regulating maternal transcripts to control meiotic resumption. Mouse oocytes deficient for Spin1 undergo normal folliculogenesis, but are defective in resuming meiosis. SPIN1, via its Tudor-like domain, forms a ribonucleoprotein complex with SERBP1, and regulating mRNA stability and/or translation. The mRNA for the cAMP-degrading enzyme, PDE3A, is reduced in Spin1 mutant oocytes, possibly contributing to meiotic arrest. Our study demonstrates that Spin1 regulates maternal transcripts post-transcriptionally and is involved in meiotic resumption.

Symmetric cell division of the mouse zygote requires an actin network.

Positioning of the cleavage plane is regulated to ensure proper animal development. Most animal cells rely on the astral microtubules to position the mitotic spindle, which in turn specifies the cleavage plane. The mouse zygote lacks discernible astral microtubules but still divides symmetrically. Here, we demonstrate a cloud-like accumulation of F-actin surrounds the spindle in zygotes and when this actin network is disassembled, the spindle assumes an off-center position, and the resulting zygote divides asymmetrically into two unequal size blastomeres. Interestingly, when the spindle is micromanipulated to the subcortical region, the zygote without the actin network is unable to reposition the spindle and cleavage plane at the cell center. This study reveals that an actin network maintains the central spindle position in anastral mitosis, and ensures the first embryonic mitosis is symmetrical. © 2012 Wiley Periodicals, Inc.

SIN-inhibitory phosphatase complex promotes Cdc11p dephosphorylation and propagates SIN asymmetry in fission yeast.

BACKGROUND: Cytokinesis in many eukaryotes involves the function of an actomyosin-based contractile ring. In fission yeast, actomyosin ring maturation and stability require a conserved signaling pathway termed the SIN (septation initiation network). The SIN consists of a GTPase (Spg1p) and three protein kinases, all of which localize to the mitotic spindle pole bodies (SPBs). Two of the SIN kinases, Cdc7p and Sid1p, localize asymmetrically to the newly duplicated SPB in late anaphase. How this asymmetry is achieved is not understood, although it is known that their symmetric localization impairs cytokinesis. RESULTS: Here we characterize a new Forkhead-domain-associated protein, Csc1p, and identify SIN-inhibitory PP2A complex (SIP), which is crucial for the establishment of SIN asymmetry. Csc1p localizes to both SPBs early in mitosis, is lost from the SPB that accumulates Cdc7p, and instead accumulates at the SPB lacking Cdc7p. Csc1p is required for the dephosphorylation of the SIN scaffolding protein Cdc11p and is thereby required for the recruitment of Byr4p, a component of the GTPase-activating subunit for Spg1p, to the SPB. CONCLUSIONS: Because Cdc7p does not bind to GDP-Spg1p, we propose that the SIP-mediated Cdc11p dephosphorylation and the resulting recruitment of Byr4p are among the earliest steps in the establishment of SIN asymmetry.