Optical and dielectric response of two-dimensional WX2 (X = Cl, O, S, Se, Te) monolayers: A comprehensive study based on density functional theory.

Here, we study the dielectric and optical properties of two-dimensional (2D) WX2 monolayers, where X is Cl, O, S, Se, and Te. First principle electronic band structure calculations reveal that all materials are direct band gap semiconductors except WO2 and WCl2 , which are found to be indirect band gap semiconducting 2D materials. The dielectric response of these materials is also systematically investigated. The obtained results suggest that these materials are suitable as dielectric materials to suppress unwanted signal noise. The optical properties of these 2D materials, such as absorption, reflection and extinction coefficients, refractive index, and optical conductivity, are also calculated from the dielectric function. It is found that these materials exhibit excellent optical response. The present electronic, dielectric, and optical findings indicate that WX2 monolayers have an opportunity in electronic, optical, and optoelectronic device applications.

Recent advances in ZnO nanostructure as a gas-sensing element for an acetone sensor: a short review.

Air pollution is a severe concern globally as it disturbs the health conditions of living beings and the environment because of the discharge of acetone molecules. Metal oxide semiconductor (MOS) nanomaterials are crucial for developing efficient sensors because of their outstanding chemical and physical properties, empowering the inclusive developments in gas sensor productivity. This review presents the ZnO nanostructure state of the art and notable growth, and their structural, morphological, electronic, optical, and acetone-sensing properties. The key parameters, such as response, gas detection limit, sensitivity, reproducibility, response and recovery time, selectivity, and stability of the acetone sensor, have been discussed. Furthermore, gas-sensing mechanism models based on MOS for acetone sensing are reported and discussed. Finally, future possibilities and challenges for MOS (ZnO)-based gas sensors for acetone detection have also been explored.

WS2 Nanorod as a Remarkable Acetone Sensor for Monitoring Work/Public Places.

Here, we report the synthesis of the WS2 nanorods (NRs) using an eco-friendly and facile hydrothermal method for an acetone-sensing application. This study explores the acetone gas-sensing characteristics of the WS2 nanorod sensor for 5, 10, and 15 ppm concentrations at 25 °C, 50 °C, 75 °C, and 100 °C. The WS2 nanorod sensor shows the highest sensitivity of 94.5% at 100 °C for the 15 ppm acetone concentration. The WS2 nanorod sensor also reveals the outstanding selectivity of acetone compared to other gases, such as ammonia, ethanol, acetaldehyde, methanol, and xylene at 100 °C with a 15 ppm concentration. The estimated selectivity coefficient indicates that the selectivity of the WS2 nanorod acetone sensor is 7.1, 4.5, 3.7, 2.9, and 2.0 times higher than xylene, acetaldehyde, ammonia, methanol, and ethanol, respectively. In addition, the WS2 nanorod sensor also divulges remarkable stability of 98.5% during the 20 days of study. Therefore, it is concluded that the WS2 nanorod can be an excellent nanomaterial for developing acetone sensors for monitoring work/public places.

Optical design for single-mode and single-cell gap transflective liquid crystal displays.

Generally, for transflective liquid crystal displays with different modes and different cell gaps between the refractive and transmissive parts, precise process control to pattern the electrode and match the cell gaps may reduce the yield and thus, require high cost. This paper proposes a simple transflective liquid crystal display with a single-mode and single-cell thickness without a patterned electrode to achieve better productivity. The proposed transflective liquid crystal display consists of three half-wave retardation films, two quarter-wave retardation films, and an LC layer, whose optical performance was confirmed by both simulation and experiment. The optimal optical configuration to obtain an excellent dark state in the visible range was determined by the Mueller matrices calculus, which was applied to each optical component. The calculated and experimental results showed that the proposed transflective LC structure has excellent electro-optical properties and is expected to have many liquid crystal display applications.

Infrared shutter using cholesteric liquid crystal.

In this paper, we propose an infrared light shutter device using cholesteric liquid crystals. The pitch of the device corresponds to the wavelengths of the infrared region with a strong thermal effect. This device is intended for use as a smart window to maintain an optimal indoor temperature by controlling the infrared radiation coming from the sun. The proposed cholesteric device switches between the planar state and the isotropic state by controlling the temperature using an electrically heated transparent electrode made of indium tin oxide. A window with a planar state that reflects infrared radiation would be used mainly in the summer, while the isotropic state that transmits infrared would be applied in the winter. The proposed device produced a variety of gray levels of transmittance based on the temperature, and thus it can provide the proper temperature for each user. The easy fabrication process gives it appeal as a functional device in the smart window market, and it compares favorably with previous light shutter devices. The infrared shutter is expected to be useful for next-generation window applications.

Reflective liquid crystal display for better productivity.

Most reflective LCDs so far proposed require a very thin cell gap of approximately 1.5 µm to satisfy the quarter-wave retardation condition when used with a half-wave retardation film to obtain an acceptable broadband performance over the entire visible range. On the other hand, the inevitable difficulty associated with precise manufacturing of thin cell gap devices is likely to deteriorate the yield, thereby increasing the production cost. This paper proposes a reflective LCD with a larger cell thickness to achieve better productivity. The proposed reflective LCD consists of a tactically arranged stack of a half-wave retardation film, a quarter-wave retardation film, and a liquid-crystal (LC) layer whose optical performance has been confirmed both by simulation and experiment. The optimal optical configuration to obtain an excellent dark state in the visible range was determined by the Mueller matrices calculus as applied to each optical component. The simulated and experimental results showed that the proposed reflective LC structure has excellent electro-optical properties and is expected to be useful for the next generation LCD industry.

A digital workflow for pair matching of maxillary anterior teeth using a 3D segmentation technique for esthetic implant restorations.

We investigated a state-of-the-art algorithm for 3D reconstruction with a pair-matching technique, which enabled the fabrication of individualized implant restorations in the esthetic zone. This method compared 3D mirror images of crowns and emergence profiles between symmetric tooth pairs in the anterior maxilla using digital slicewise DICOM segmentation and the superimposition of STL data. With the outline extraction of each segment provided by 100 patients, the Hausdorff distance (HD) between two point sets was calculated to identify the similarity of the sets. By using HD thresholds as a pair matching criterion, the true positive rates of crowns were 100, 98, and 98%, while the false negative rates were 0, 2, and 2% for central incisors, lateral incisors, and canines, respectively, indicating high pair matching accuracy (> 99%) and sensitivity (> 98%). The true positive rates of emergence profiles were 99, 100, and 98%, while the false negative rates were 1, 0, and 2% for central incisors, lateral incisors, and canines, respectively, indicating high pair matching accuracy (> 99%) and sensitivity (> 98%). Therefore, digitally flipped contours of crown and emergence profiles can be successfully transferred for implant reconstruction in the maxillary anterior region to optimize esthetics and function.

ZnS Quantum Dot Based Acetone Sensor for Monitoring Health-Hazardous Gases in Indoor/Outdoor Environment.

This study reports the ZnS quantum dots (QDs) synthesis by a hot-injection method for acetone gas sensing applications. The prepared ZnS QDs were characterized by X-ray diffraction (XRD) and transmission electron microscopy analysis. The XRD result confirms the successful formation of the wurtzite phase of ZnS, with a size of ~5 nm. Transmission electron microscopy (TEM), high-resolution TEM (HRTEM), and fast Fourier transform (FFT) images reveal the synthesis of agglomerated ZnS QDs with different sizes, with lattice spacing (0.31 nm) corresponding to (111) lattice plane. The ZnS QDs sensor reveals a high sensitivity (92.4%) and fast response and recovery time (5.5 s and 6.7 s, respectively) for 100 ppm acetone at 175 °C. In addition, the ZnS QDs sensor elucidates high acetone selectivity of 91.1% as compared with other intrusive gases such as ammonia (16.0%), toluene (21.1%), ethanol (26.3%), butanol (11.2%), formaldehyde (9.6%), isopropanol (22.3%), and benzene (18.7%) for 100 ppm acetone concentration at 175 °C. Furthermore, it depicts outstanding stability (89.1%) during thirty days, with five day intervals, for 100 ppm at an operating temperature of 175 °C. In addition, the ZnS QDs acetone sensor elucidates a theoretical detection limit of ~1.2 ppm at 175 °C. Therefore, ZnS QDs can be a promising and quick traceable sensor nanomaterial for acetone sensing applications.

A novel RGO/N-RGO supercapacitor architecture for a wide voltage window, high energy density and long-life via voltage holding tests.

Here, we demonstrated a unique symmetric supercapacitor (SSC) device architecture based on reduced graphene oxide (RGO) and nitrogen-doped RGO (N-RGO) electrodes. The RGO/N-RGO SSC shows a wide voltage window (2.2 V), high energy density (106.3 W h kg-1), and ultra-high power density (15184.8 W kg-1). The RGO/N-RGO SSC also delivers outstanding stability of 95.5% over 10 000 galvanostatic charging-discharging tests and 90.5% over 8 h of voltage holding tests. Additionally, this work explores a better understanding of leakage current and self-discharge mechanisms, which justifies the excellent state of health of the RGO/N-RGO SSC device.

Numerical study to indicate the vulnerability of plaques using an idealized 2D plaque model based on plaque classification in the human coronary artery.

Atherosclerosis is one of the leading causes of death in the world. In this study, an idealized 2D plaque model based on plaque classification in the coronary artery is developed. When creating the idealized 2D model for each plaque type (fibrocalcic, FC; fibrofatty, FT; calcified fibroatheroma, CaFA; fibroatheroma, FA; calcified thin-cap fibroatheroma, CaTCFA; thin-cap fibroatheroma, TCFA), the cap thickness and stenosis by diameter were set as variables. In order to establish the correlation between each plaque type and plaque rupture, a numerical simulation was performed and the stress and stress gradient were reviewed to analyze the mechanical behavior. Results show that both the TCFA and CaTCFA plaque types, which have the smallest cap thicknesses of the different types of plaque, showed relatively high stress values in the thin membrane when compared with the FT type. The FT type is considered to be relatively stable since it does not have necrotic core or a thin membrane. With a stenosis rate of 50% and a cap thickness of 60 µm, the TCFA and CaTCFA types showed approximately 11 and 110% higher stress values, respectively, and 679 and 1568% higher negative stress gradient values, respectively. In other words, the plaque types with thin caps, which have weak load-bearing capacities, showed high stress values and high negative stress gradients in the radial direction. It is understood that this result could indicate the possibility of plaque rupture.

Visual evaluation of surface anchoring strength by electrohydrodynamic convection of a nematic liquid crystal.

Visual evaluation of the surface anchoring energies in a nematic liquid crystal (LC) cell is characterized by the direction of the convection roll pattern that appears in the low-frequency conduction regime. The convection roll pattern in a twisted nematic LC (TNLC) cell is oriented perpendicular to the midplane LC director dominating the direction of convection flow, and its direction is determined by the relative surface anchoring energy between two surface boundaries. Thus the direction of the roll pattern generated at the TNLC cell with asymmetric LC alignment layers can provide information on the surface anchoring energies at the two boundaries. We demonstrate a method for determining the two anchoring energies through a measured midplane LC director applied to the Ericksen-Leslie equation.

Polarized Light-Emitting Diodes Based on Patterned MoS2 Nanosheet Hole Transport Layer.

Here, this study successfully fabricates few-layer MoS2 nanosheets from (NH4 )2 MoS4 and applies them as the hole transport layer as well as the template for highly polarized organic light-emitting diodes (OLEDs). The obtained material consists of polycrystalline MoS2 nanosheets with thicknesses of 2 nm. The MoS2 nanosheets are patterned by rubbing/ion-beam treatment. The Raman spectra shows that {poly(9,9-dioctylfluorene-alt-benzothiadiazole), poly[(9,9-di-n-octylfluorenyl-2,7-diyl)-alt-(benzo[2,1,3]thiadiazol-4,8-diyl)]} (F8BT) on patterned MoS2 exhibits distinctive polarization behavior. It is discovered that patterned MoS2 not only improves the device efficiency but also changes the polarization behavior of the devices owing to the alignment of F8BT. This work demonstrates a highly efficient polarized OLED with a polarization ratio of 62.5:1 in the emission spectrum (166.7:1 at the peak intensity of 540 nm), which meets the manufacturing requirement. In addition, the use of patterned MoS2 nanosheets not only tunes the polarization of the OLEDs but also dramatically improves the device performance as compared with that of devices using untreated MoS2 .

Nanoscale characterization of acid and thermally treated collagen fibrils.

Type I collagen is a major extracellular matrix component and its hierarchical structure plays an essential role in the regulation of cellular behavior. Here, we have analyzed the changes in the morphological, chemical, and mechanical properties of collagen fibrils induced by acidic and thermal treatments and the influence on the cellular response of MC3T3-E1 cells. Morphological changes induced by the disintegration of the fibrillar structure of collagen were observed using atomic force microscopy. The changes in the surface chemistry due to the disassembly of native collagen fibrils were observed using time-of-flight secondary ion mass spectroscopy (ToF-SIMS). ToF-SIMS spectra were very sensitive to changes in the molecular configuration of the collagen fibrils induced by acidic and thermal treatments due to the extreme surface specificity. In addition, ToF-SIMS showed clear and reproducible changes in the surface amino acid composition corresponding to the acidic and thermal treatments of collagen fibrils. Based on the quantitative map of surface elastic modulus measured by contact-resonance force microscopy, acid and thermally treated collagen showed a lower elastic modulus than native collagen fibrils. Compared with native collagen fibrils, reduced cell spreading and decreased viability of MC3T3-E1 cells were observed on both the acid and thermally treated collagen.