Chitosan-Based Biomaterials: Insights into Chemistry, Properties, Devices, and Their Biomedical Applications.

Chitosan is a marine-origin polysaccharide obtained from the deacetylation of chitin, the main component of crustaceans' exoskeleton, and the second most abundant in nature. Although this biopolymer has received limited attention for several decades right after its discovery, since the new millennium chitosan has emerged owing to its physicochemical, structural and biological properties, multifunctionalities and applications in several sectors. This review aims at providing an overview of chitosan properties, chemical functionalization, and the innovative biomaterials obtained thereof. Firstly, the chemical functionalization of chitosan backbone in the amino and hydroxyl groups will be addressed. Then, the review will focus on the bottom-up strategies to process a wide array of chitosan-based biomaterials. In particular, the preparation of chitosan-based hydrogels, organic-inorganic hybrids, layer-by-layer assemblies, (bio)inks and their use in the biomedical field will be covered aiming to elucidate and inspire the community to keep on exploring the unique features and properties imparted by chitosan to develop advanced biomedical devices. Given the wide body of literature that has appeared in past years, this review is far from being exhaustive. Selected works in the last 10 years will be considered.

Synthesis and Characterization of Alkoxysilane-Bearing Photoreversible Cinnamic Side Groups: A Promising Building-Block for the Design of Multifunctional Silica Nanoparticles.

The present study reports on the synthesis of a new alkoxysilane-bearing light-responsive cinnamyl group and its application as a surface functionalization agent for the development of SiO2 nanoparticles (NPs) with photoreversible tails. In detail, cinnamic acid (CINN) was activated with N-hydroxysuccinimide (NHS) to obtain the corresponding NHS-ester (CINN-NHS). Subsequently, the amine group of 3-aminopropyltriethoxysilane (APTES) was acylated with CINN-NHS leading to the generation of a novel organosilane, CINN-APTES, which was then exploited for decorating SiO2 NPs. The covalent bond to the silica surface was confirmed by solid state NMR, whereas thermogravimetric analysis unveiled a functionalization degree much higher compared to that achieved by a conventional double-step post-grafting procedure. In light of these intriguing results, the strategy was successfully extended to naturally occurring sepiolite fibers, widely employed as fillers in technological applications. Finally, a preliminary proof of concept of the photoreversibility of the obtained SiO2@CINN-APTES system has been carried out through UV diffuse reflectance. The overall outcomes prove the consistency and the versatility of the methodological protocol adopted, which appears promising for the design of hybrid NPs to be employed as building blocks for photoresponsive materials with the ability to change their molecular structure and subsequent properties when exposed to different light stimuli.

Differential glycosylation of collagen modulates lung cancer stem cell subsets through ß1 integrin-mediated interactions.

In lung cancer, CD133+ cells represent the subset of cancer stem cells (CSC) able to sustain tumor growth and metastatic dissemination. CSC function is tightly regulated by specialized niches composed of both stromal cells and extracellular matrix (ECM) proteins, mainly represented by collagen. The relevance of collagen glycosylation, a fundamental post-translational modification controlling several biological processes, in regulating tumor cell phenotype remains, however, largely unexplored. To investigate the bioactive effects of differential ECM glycosylation on lung cancer cells, we prepared collagen films functionalized with glucose (Glc-collagen) and galactose (Gal-collagen) exploiting a neoglycosylation approach based on a reductive amination of maltose and lactose with the amino residues of collagen lysines. We demonstrate that culturing of tumor cells on collagen determines a glycosylation-dependent positive selection of CSC and triggers their expansion/generation. The functional relevance of CD133+ CSC increase was validated in vivo, proving an augmented tumorigenic and metastatic potential. High expression of integrin ß1 in its active form is associated with an increased proficiency of tumor cells to sense signaling from glycosylated matrices (glyco-collagen) and to acquire stemness features. Accordingly, inhibition of integrin ß1 in tumor cells prevents CSC enrichment, suggesting that binding of integrin ß1 to Glc-collagen subtends CSC expansion/generation. We provide evidence suggesting that collagen glycosylation could play an essential role in modulating the creation of a niche favorable for the generation and selection/survival of lung CSC. Interfering with this crosstalk may represent an innovative therapeutic strategy for lung cancer treatment.

Squarate Cross-Linked Gelatin Hydrogels as Three-Dimensional Scaffolds for Biomedical Applications.

Hydrogels are useful platforms as three-dimensional (3D) scaffolds for cell culture, drug-release systems, and regenerative medicine applications. Here, we propose a novel chemical cross-linking approach by the use of 3,4-diethoxy-3-cyclobutene-1,2-dione or diethyl squarate for the preparation of 5 and 10% w/v gelatin-based hydrogels. Hydrogels showed good swelling properties, and the 5% gelatin-based hydrogel proved suitable as a 3D cell culture scaffold for the chondrocyte cell line C28/I2. In addition, diffusion properties of different sized molecules inside the hydrogel were determined.

Histological validation of adipogenic differentiation potential of ASC on collagen-based 2D scaffolds.

Determination of the adipogenic potential and behavior of adipose-derived mesenchymal stem/stromal cells (ASCs) is particularly relevant for their potential clinical application in regenerative medicine, especially when regeneration is supported by biomaterials or scaffolds. Scaffolds need to be able to induce tissue repair and limit undesired adipogenic differentiation. Depending on the scaffold employed, determination of cell behavior may be hindered by material interference with staining, which will limit either cells identification or dye quantification. Collagen is a promising biomaterial in regenerative medicine, however, histological analysis of cells cultured on collagen-based scaffolds is challenging. Here we describe a new histological method based on iron hematoxylin combined with Oil red O (ORO) staining, for the determination of the adipogenic differentiation of ASCs cultivated on a collagen-based 2D scaffold. ASCs were seeded on collagen films or plastic, differentiated into adipocytes for 14 days, and then stained with either ORO or iron hematoxylin and ORO combined. The collagen films avidly absorbed the ORO dye; conventional staining and quantification by dye extraction failed to discriminate between differentiated and undifferentiated cells on the films. On the contrary, the iron hematoxylin-ORO combination provided a quantitative and more reliable determination of adipocytes based on single cell count. This method is particularly recommended for determining the adipogenic differentiation potential of ASCs and other cell types grown on highly absorptive materials that need to be validated for their potential use in bioengineering and regenerative medicine.

Synthesis, Molecular Modeling and Biological Evaluation of Metabolically Stable Analogues of the Endogenous Fatty Acid Amide Palmitoylethanolamide.

Palmitoylethanolamide (PEA) belongs to the class of N-acylethanolamine and is an endogenous lipid potentially useful in a wide range of therapeutic areas; products containing PEA are licensed for use in humans as a nutraceutical, a food supplement, or food for medical purposes for its analgesic and anti-inflammatory properties demonstrating efficacy and tolerability. However, the exogenously administered PEA is rapidly inactivated; in this process, fatty acid amide hydrolase (FAAH) plays a key role both in hepatic metabolism and in intracellular degradation. So, the aim of the present study was the design and synthesis of PEA analogues that are more resistant to FAAH-mediated hydrolysis. A small library of PEA analogues was designed and tested by molecular docking and density functional theory calculations to find the more stable analogue. The computational investigation identified RePEA as the best candidate in terms of both synthetic accessibility and metabolic stability to FAAH-mediated hydrolysis. The selected compound was synthesized and assayed ex vivo to monitor FAAH-mediated hydrolysis and to confirm its anti-inflammatory properties. 1H-NMR spectroscopy performed on membrane samples containing FAAH in integral membrane protein demonstrated that RePEA is not processed by FAAH, in contrast with PEA. Moreover, RePEA retains PEA's ability to inhibit LPS-induced cytokine release in both murine N9 microglial cells and human PMA-THP-1 cells.

Neoglycosylated Collagen: Effect on Neuroblastoma F-11 Cell Lines.

The regeneration of the nervous system is a challenging task. Currently, regenerative medicine approaches that exploit nature-inspired cues are being studied and hold great promise. The possibility to use protein-based matrices functionalized with small oligo- and monosaccharides is of interest since these can be finely tuned to better mimic the native environment. Collagen has been selected as a promising material that has the potential to be further tailored to incorporate carbohydrates in order to drive cell behavior towards neuroregeneration. Indeed, the grafting of carbohydrates to collagen 2D matrices is proved to enhance its biological significance. In the present study, collagen 2D matrices were grafted with different carbohydrate epitopes, and their potential to drive F-11 neuroblastoma cells towards neuronal differentiation was evaluated. Collagen functionalized with α-glucosides was able to differentiate neuroblastoma cells into functional neurons, while sialyl α-(2→6)-galactosides stimulated cell proliferation.

Gelatin-Based Hydrogels through Homobifunctional Triazolinediones Targeting Tyrosine Residues.

Gelatin is a biopolymer with interesting properties that can be useful for biomaterial design for different applications such as drug delivery systems, or 3D scaffolds for tissue engineering. However, gelatin suffers from poor mechanical stability at physiological temperature, hence methods for improving its properties are highly desirable. In the present work, a new chemical cross-linking strategy based on triazolinedione ene-type chemistry towards stable hydrogel is proposed. Two different homobifunctional 1,2,4-triazoline-3,5(4H)-diones, namely 4,4'-hexane-1,6-diylbis(3H-1,2,4-triazoline-3,5(4H)-dione) 1 and 4,4'-[methylenebis(4,1-phenylene)]bis(3H-1,2,4-triazoline-3,5(4H)-dione) 2 were used as cross-linkers in different ratio to tyrosine residues in gelatin. The reaction was proved effective in all experimented conditions and hydrogels featured with different thermal stability were obtained. In general, the higher the cross-linker/tyrosine ratio, the more thermostable the hydrogel. The swelling properties are strictly dependent upon the chemical nature of the cross-linker.

Glycomics: New Challenges and Opportunities in Regenerative Medicine.

Tissue engineering relies on the possibility to engineer cell microenvironments by means of bioactive materials, biochemical and physical stimuli in order to guide cell behaviour and to regenerate damaged tissue. Despite the relevance of glycan epitopes as signaling molecules, and the recent advances in glycomics, their use as biomolecular cues at the interface between materials and cells for the controlled stimulation of adhesion and differentiation processes for regenerative medicine applications is still limited. In this concept article we will briefly outline the basis and the impact on health and economics of regenerative medicine, together with the recent applications of the glycocode in tissue regeneration approaches.

Synthetic sulfoglycolipids targeting the serine-threonine protein kinase Akt.

The serine-threonine protein kinase Akt, also known as protein kinase B, is a key component of the phosphoinositide 3-kinase (PI3K)-Akt-mTOR axis. Deregulated activation of this pathway is frequent in human tumors and Akt-dependent signaling appears to be critical in cell survival. PI3K activation generates 3-phosphorylated phosphatidylinositols that bind Akt pleckstrin homology (PH) domain. The blockage of Akt PH domain/phosphoinositides interaction represents a promising approach to interfere with the oncogenic potential of over-activated Akt. In the present study, phosphatidyl inositol mimics based on a ß-glucoside scaffold have been synthesized as Akt inhibitors. The compounds possessed one or two lipophilic moieties of different length at the anomeric position of glucose, and an acidic or basic group at C-6. Docking studies, ELISA Akt inhibition assays, and cellular assays on different cell models highlighted 1-O-octadecanoyl-2-O-ß-d-sulfoquinovopyranosyl-sn-glycerol as the best Akt inhibitor among the synthesized compounds, which could be considered as a lead for further optimization in the design of Akt inhibitors.

Anionic glycolipids related to glucuronosyldiacylglycerol inhibit protein kinase Akt.

New glucuronosyldiacylglycerol (GlcADG) analogues based on a 2-O-ß-D-glucopyranosyl-sn-glycerol scaffold and carrying one or two acyl chains of different lengths have been synthesized as phosphatidylinositol 3-phosphate (PI3P) mimics targeting the protein kinase Akt. The Akt inhibitory effect of the prepared compounds was assayed using an in vitro kinase assay. The antiproliferative activity of the compounds was tested in the human ovarian carcinoma IGROV-1 cell line in which we found that two of them could inhibit proliferation, in keeping with the target inhibitory effect.

New synthesis and biological evaluation of uniflorine A derivatives: towards specific insect trehalase inhibitors.

7-Deoxy-uniflorine A (6), synthesized ex novo with a straightforward and simple strategy, and the analogues 4, 5 and 7, were evaluated as potential inhibitors of insect trehalase from Chironomus riparius and Spodoptera littoralis. All the compounds were tested against porcine trehalase as the mammalian counterpart and α-amylase from human saliva as a relevant glucolytic enzyme. The aim of this work is the identification of the simplest pyrrolizidine structure necessary to impart selective insect trehalase inhibition, in order to identify new specific inhibitors that can be easily synthesized compared to our previous reports with the potential to act as non-toxic insecticides and/or fungicides. All the derivatives 4­7 proved to be active (from low micromolar to high nanomolar range activity) towards insect trehalases, while no activity was observed against α-amylase. In particular, the natural compound uniflorine A and its 7-deoxy analogue were found to selectively inhibit insect trehalases, as they are inactive towards the mammalian enzyme. The effect of compound 6 was also analyzed in preliminary in vivo experiments. These new findings allow the identification of natural uniflorine A and its 7-deoxy analogue as the most promising inhibitors among a series of pyrrolizidine derivatives for future development in the agrochemical field, and the investigation also outlined the importance of the stereochemistry at C-6 of pyrrolizidine nucleus to confer such enzyme specificity.

Thiol-ene mediated neoglycosylation of collagen patches: a preliminary study.

Despite the relevance of carbohydrates as cues in eliciting specific biological responses, the covalent surface modification of collagen-based matrices with small carbohydrate epitopes has been scarcely investigated. We report thereby the development of an efficient procedure for the chemoselective neoglycosylation of collagen matrices (patches) via a thiol-ene approach, between alkene-derived monosaccharides and the thiol-functionalized material surface. Synchrotron radiation-induced X-ray photoelectron spectroscopy (SR-XPS), Fourier transform-infrared (FT-IR), and enzyme-linked lectin assay (ELLA) confirmed the effectiveness of the collagen neoglycosylation. Preliminary biological evaluation in osteoarthritic models is reported. The proposed methodology can be extended to any thiolated surface for the development of smart biomaterials for innovative approaches in regenerative medicine.

Arabinose 5-phosphate isomerase as a target for antibacterial design: studies with substrate analogues and inhibitors.

Structural requirements of D-arabinose 5-phosphate isomerase (KdsD, E.C. 5.3.1.13) from Pseudomonas aeruginosa were analysed in detail using advanced NMR techniques. We performed epitope mapping studies of the binding between the enzyme and the most potent KdsD inhibitors found to date, together with studies of a set of newly synthesised arabinose 5-phosphate (A5P) mimetics. We report here the first experimental evidence that KdsD may bind the furanose form of A5P, suggesting that catalysis of ring opening may be an important part of KdsD catalysis.

Bifunctional dendrons for multiple carbohydrate presentation via carbonyl chemistry.

The synthesis of new dendrons of the generations 0, 1 and 2 with a double bond at the focal point and a carbonyl group at the termini has been carried out. The carbonyl group has been exploited for the multivalent conjugation to a sample saccharide by reductive amination and alkoxyamine conjugation.

Epoxide opening versus silica condensation during sol-gel hybrid biomaterial synthesis.

Hybrid organic-inorganic solids represent an important class of engineering materials, usually prepared by sol-gel processes by cross-reaction between organic and inorganic precursors. The choice of the two components and control of the reaction conditions (especially pH value) allow the synthesis of hybrid materials with novel properties and functionalities. 3-Glycidoxypropyltrimethoxysilane (GPTMS) is one of the most commonly used organic silanes for hybrid-material fabrication. Herein, the reactivity of GPTMS in water at different pH values (pH 2-11) was deeply investigated for the first time by solution-state multinuclear NMR spectroscopic and mass spectrometric analysis. The extent of the different and competing reactions that take place as a function of the pH value was elucidated. The NMR spectroscopic and mass spectrometric data clearly indicate that the pH value determines the kinetics of epoxide hydrolysis versus silicon condensation. Under slighly acidic conditions, the epoxy-ring hydrolysis is kinetically more favourable than the formation of the silica network. In contrast, under basic conditions, silicon condensation is the main reaction that takes place. Full characterisation of the formed intermediates was carried out by using NMR spectroscopic and mass spectrometric analysis. These results indicate that strict control of the pH values allows tuning of the reactivity of the organic and inorganic moities, thus laying the foundations for the design and synthesis of sol-gel hybrid biomaterials with tuneable properties.

Enhancing the Activity of Surface Immobilized Antimicrobial Peptides Using Thiol-Mediated Tethering to Poly(ethylene glycol).

Considering the need for versatile surface coatings that can display multiple bioactive signals and chemistries, the use of more novel surface modification methods is starting to emerge. Thiol-mediated conjugation of biomolecules is shown to be quite advantageous for such purposes due to the reactivity and chemoselectivity of thiol functional groups. Herein, the immobilization of poly(ethylene glycol) (PEG) and antimicrobial peptides (AMPs) to silica colloidal particles based on thiol-mediated conjugation techniques, along with an assessment of the antimicrobial potential of the functionalized particles against Pseudomonas aeruginosa and Staphylococcus aureus is investigated. Immobilization of PEG to thiolated Si particles is performed by either a two-step thiol-ene "photo-click" reaction or a "one-pot" thiol-maleimide type conjugation using terminal acrylate or maleimide functional groups, respectively. It is demonstrated that both immobilization methods result in a significant reduction in the number of viable bacterial cells compared to unmodified samples after the designated incubation periods with the PEG-AMP-modified colloidal suspensions. These findings provide a promising outlook for the fabrication of multifunctional surfaces based upon the tethering of PEG and AMPs to colloidal particles through thiol-mediated biocompatible chemistry, which has potential for use as implant coatings or as antibacterial formulations that can be incorporated into wound dressings to prevent or control bacterial infections.

The influence of plasma technology coupled to chemical grafting on the cell growth compliance of 3D hydroxyapatite scaffolds.

The development of advanced materials with biomimetic features in order to elicit desired biological responses and to guarantee tissue biocompatibility is recently gaining attention for tissue engineering applications. Bioceramics, such as hydroxyapatite-based biomaterials are now used in a number of different applications throughout the body, covering all areas of the skeleton, due to their biological and chemical similarity to the inorganic phases of bones. When bioactive sintered hydroxyapatite (HA) is desired, biomolecular modification of these materials is needed. In the present work, we investigated the influence of plasma surface modification coupled to chemical grafting on the cell growth compliance of HA 3D scaffolds.

Synthesis and biological evaluation of nojirimycin- and pyrrolidine-based trehalase inhibitors.

A small set of nojirimycin- and pyrrolidine-based iminosugar derivatives has been synthesized and evaluated as potential inhibitors of porcine and insect trehalases. Compounds 12, 13 and 20 proved to be active against both insect and porcine trehalases with selectivity towards the insect glycosidase, while compounds 10, 14 and 16 behaved as inhibitors only of insect trehalase. Despite the fact that the activity was found in the micromolar range, these findings may help in elucidating the structural features of this class of enzymes of different origin, which are still scarcely characterised.

Fabrication Strategies Towards Hydrogels for Biomedical Application: Chemical and Mechanical Insights.

This review aims at giving selected chemical and mechanical insights on design criteria that should be taken into account in hydrogel production for biomedical applications. Particular emphasis will be given to the chemical aspects involved in hydrogel design: macromer chemical composition, cross-linking strategies and chemistry towards "conventional" and smart/stimuli responsive hydrogels. Mechanical properties of hydrogels in view of regenerative medicine applications will also be considered.