Water and Cu+ Synergy in Selective CO2 Hydrogenation to Methanol over Cu-MgO-Al2O3 Catalysts.

The CO2 hydrogenation reaction to produce methanol holds great significance as it contributes to achieving a CO2-neutral economy. Previous research identified isolated Cu+ species doping the oxide surface of a Cu-MgO-Al2O3-mixed oxide derived from a hydrotalcite precursor as the active site in CO2 hydrogenation, stabilizing monodentate formate species as a crucial intermediate in methanol synthesis. In this work, we present a molecular-level understanding of how surface water and hydroxyl groups play a crucial role in facilitating spontaneous CO2 activation at Cu+ sites and the formation of monodentate formate species. Computational evidence has been experimentally validated by comparing the catalytic performance of the Cu-MgO-Al2O3 catalyst with hydroxyl groups against that of its hydrophobic counterpart, where hydroxyl groups are blocked using an esterification method. Our work highlights the synergistic effect between doped Cu+ ions and adjacent hydroxyl groups, both of which serve as key parameters in regulating methanol production via CO2 hydrogenation. By elucidating the specific roles of these components, we contribute to advancing our understanding of the underlying mechanisms and provide valuable insights for optimizing methanol synthesis processes.

Low-oxidation-state Ru sites stabilized in carbon-doped RuO2 with low-temperature CO2 activation to yield methane.

The generation of methane fuel using surplus renewable energy with CO2 as the carbon source enables both the decarbonization and substitution of fossil fuel feedstocks. However, high temperatures are usually required for the efficient activation of CO2. Here we present a solid catalyst synthesized using a mild, green hydrothermal synthesis that involves interstitial carbon doped into ruthenium oxide, which enables the stabilization of Ru cations in a low oxidation state and a ruthenium oxycarbonate phase to form. The catalyst shows an activity and selectivity for the conversion of CO2 into methane at lower temperatures than those of conventional catalysts, with an excellent long-term stability. Furthermore, this catalyst is able to operate under intermittent power supply conditions, which couples very well with electricity production systems based on renewable energies. The structure of the catalyst and the nature of the ruthenium species were acutely characterized by combining advanced imaging and spectroscopic tools at the macro and atomic scales, which highlighted the low-oxidation-state Ru sites (Run+, 0 < n < 4) as responsible for the high catalytic activity. This catalyst suggests alternative perspectives for materials design using interstitial dopants.

Oxidative dehydrogenation of ethane: catalytic and mechanistic aspects and future trends.

Ethene is a commodity chemical of great importance for manufacturing diverse consumer products, whose synthesis via crude oil steam cracking is one of the most energy-intensive processes in the petrochemical industry. Oxidative dehydrogenation (ODH) of ethane is an attractive, low energy, alternative route to ethene which could reduce the carbon footprint for its production, however, the commercial implementation of ODH requires catalysts with improved selectivity. This review critically assesses recent developments in catalytic technologies for ethane ODH, and discusses how insight into proposed mechanisms from computational studies, and CO2 assisted ethane dehydrogenation (CO2-DHE), provide opportunities for economically viable processes to meet growing demands for ethene while reducing carbon emissions. Future trends and emerging technologies for ethane ODH are also discussed.

Ligand-Functionalization-Controlled Activity of Metal-Organic Framework-Encapsulated Pt Nanocatalyst toward Activation of Water.

We first report the systematic control of the reactivity of H2O vapor in metal-organic frameworks (MOFs) with Pt nanocrystals (NCs) through ligand functionalization. We successfully synthesized Pt NCs covered with a water-stable MOF, UiO-66 (Pt@UiO-66), having different metal ions or functionalized ligands. The ligand functionalization of UiO-66 significantly affected the catalytic performance of the water-gas shift reaction, and the replacement of Zr4+ ions with Hf4+ ions in UiO-66 had no impact on the catalytic activity. The introduction of a -Br group lowered the reactivity of Pt@UiO-66 by nearly half, whereas the substitution of -Br with a -Me2 group triply enhanced the activity. The origin of the enhanced catalytic activity was found to be the change in H2O activity in the UiO-66 pores by the ligand functionalization, which was investigated using H2O sorption, solid-state NMR, X-ray photoelectron spectroscopy, and in situ IR measurements. This work opens a new prospect to develop MOFs as a platform to activate H2O.

Metal-Specific Reactivity in Single-Atom Catalysts: CO Oxidation on 4d and 5d Transition Metals Atomically Dispersed on MgO.

Understanding and tuning the catalytic properties of metals atomically dispersed on oxides are major stepping-stones toward a rational development of single-atom catalysts (SACs). Beyond individual showcase studies, the design and synthesis of structurally regular series of SACs opens the door to systematic experimental investigations of performance as a function of metal identity. Herein, a series of single-atom catalysts based on various 4d (Ru, Rh, Pd) and 5d (Ir, Pt) transition metals has been synthesized on a common MgO carrier. Complementary experimental (X-ray absorption spectroscopy) and theoretical (Density Functional Theory) studies reveal that, regardless of the metal identity, metal cations occupy preferably octahedral coordination MgO lattice positions under step-edges, hence highly confined by the oxide support. Upon exposure to O2-lean CO oxidation conditions, FTIR spectroscopy indicates the partial deconfinement of the monatomic metal centers driven by CO at precatalysis temperatures, followed by the development of surface carbonate species under steady-state conditions. These findings are supported by DFT calculations, which show the driving force and final structure for the surface metal protrusion to be metal-dependent, but point to an equivalent octahedral-coordinated M4+ carbonate species as the resting state in all cases. Experimentally, apparent reaction activation energies in the range of 96 ± 19 kJ/mol are determined, with Pt leading to the lowest energy barrier. The results indicate that, for monatomic sites in SACs, differences in CO oxidation reactivity enforceable via metal selection are of lower magnitude than those evidenced previously through the mechanistic involvement of adjacent redox centers on the oxide carrier, suggesting that tuning of the oxide surface chemistry is as relevant as the selection of the supported metal.

Regioselective generation and reactivity control of subnanometric platinum clusters in zeolites for high-temperature catalysis.

Subnanometric metal species (single atoms and clusters) have been demonstrated to be unique compared with their nanoparticulate counterparts. However, the poor stabilization of subnanometric metal species towards sintering at high temperature (>500 °C) under oxidative or reductive reaction conditions limits their catalytic application. Zeolites can serve as an ideal support to stabilize subnanometric metal catalysts, but it is challenging to localize subnanometric metal species on specific sites and modulate their reactivity. We have achieved a very high preference for localization of highly stable subnanometric Pt and PtSn clusters in the sinusoidal channels of purely siliceous MFI zeolite, as revealed by atomically resolved electron microscopy combining high-angle annular dark-field and integrated differential phase contrast imaging techniques. These catalysts show very high stability, selectivity and activity for the industrially important dehydrogenation of propane to form propylene. This stabilization strategy could be extended to other crystalline porous materials.

New trends in tailoring active sites in zeolite-based catalysts.

This review addresses the recent developments and trends in tailoring the nature and local properties of active sites in zeolite-based catalysts, with a special focus on novel extra-large pore, layered (2D), nanocrystalline, and hierarchical (mesoporous) zeolites with enhanced pore accessibility. In the first part of the review, we discuss the latest achievements in the bottom-up (direct synthesis) and top-down (post-synthesis) approaches for isomorphous substitution in zeolites enabling control over the type (Brønsted, Lewis, or both), amount, strength, and location of acid sites. The benefits in catalysis provided by such zeolites with tuned acidity and improved accessibility are shown for different acid-catalyzed reactions involving bulky molecules, as in the synthesis of fine chemicals and biomass transformations. The incorporation of metal species of different sizes (increasing from single atoms to clusters and to nanoparticles) in zeolites allows expanding the set of reactions catalyzed by these materials. The main preparation strategies for designing metal-zeolite catalysts, especially those offering control over the size of the metal species, and their catalytic behaviour in industrially relevant and emerging sustainable catalytic processes are dealt with in the second part of the review. Particular attention is paid to the stabilization of size-controlled small metal clusters and nanoparticles through their encapsulation in the voids of zeolite frameworks as well as to the dynamic behaviour of the metal species under reactive environments with important implications in catalysis. The need for using advanced operando spectroscopic and imaging tools to unveil the precise nature and functioning of the active sites in working zeolites is emphasized. The information gathered in this review is expected to provide guidance for developing more efficient zeolite-based catalysts for existing and new applications.

Regioselective Generation of Single-Site Iridium Atoms and Their Evolution into Stabilized Subnanometric Iridium Clusters in MWW Zeolite.

Preparation of supported metal catalysts with uniform particle size and coordination environment is a challenging and important topic in materials chemistry and catalysis. In this work, we report the regioselective generation of single-site Ir atoms and their evolution into stabilized subnanometric Ir clusters in MWW zeolite, which are located at the 10MR window connecting the two neighboring 12MR supercages. The size of the subnanometric Ir clusters can be controlled by the post-synthesis treatments and maintain below 1 nm even after being reduced at 650 °C, which cannot be readily achieved with samples prepared by conventional impregnation methods. The high structure sensitivity, size-dependence, of catalytic performance in the alkane hydrogenolysis reaction of Ir clusters in the subnanometric regime is evidenced.

One-Pot Cooperation of Single-Atom Rh and Ru Solid Catalysts for a Selective Tandem Olefin Isomerization-Hydrosilylation Process.

Realizing the full potential of oxide-supported single-atom metal catalysts (SACs) is key to successfully bridge the gap between the fields of homogeneous and heterogeneous catalysis. Here we show that the one-pot combination of Ru1 /CeO2 and Rh1 /CeO2 SACs enables a highly selective olefin isomerization-hydrosilylation tandem process, hitherto restricted to molecular catalysts in solution. Individually, monoatomic Ru and Rh sites show a remarkable reaction specificity for olefin double-bond migration and anti-Markovnikov α-olefin hydrosilylation, respectively. First-principles DFT calculations ascribe such selectivity to differences in the binding strength of the olefin substrate to the monoatomic metal centers. The single-pot cooperation of the two SACs allows the production of terminal organosilane compounds with high regio-selectivity (>95 %) even from industrially-relevant complex mixtures of terminal and internal olefins, alongside a straightforward catalyst recycling and reuse. These results demonstrate the significance of oxide-supported single-atom metal catalysts in tandem catalytic reactions, which are central for the intensification of chemical processes.

Hydrothermal Synthesis of Ruthenium Nanoparticles with a Metallic Core and a Ruthenium Carbide Shell for Low-Temperature Activation of CO2 to Methane.

Ruthenium nanoparticles with a core-shell structure formed by a core of metallic ruthenium and a shell of ruthenium carbide have been synthesized by a mild and easy hydrothermal treatment. The dual structure and composition of the nanoparticles have been determined by synchrotron X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure (NEXAFS) analysis, and transmission electron microscopy (TEM) imaging. According to depth profile synchrotron XPS and X-ray diffraction (XRD) analysis, metallic ruthenium species predominate in the inner layers of the material, ruthenium carbide species being located on the upper surface layers. The ruthenium carbon catalysts presented herein are able to activate both CO2 and H2, exhibiting exceptional high activity for CO2 hydrogenation at low temperatures (160-200 °C) with 100% selectivity to methane, surpassing by far the most active Ru catalysts reported up to now. On the basis of catalytic studies and isotopic 13CO/12CO2/H2 experiments, the active sites responsible for this unprecedented activity can be associated with surface ruthenium carbide (RuC) species, which enable CO2 activation and transformation to methane via a direct CO2 hydrogenation mechanism. Both the high activity and the absence of CO in the gas effluent confer relevance to these catalysts for the Sabatier reaction, a chemical process with renewed interest for storing surplus renewable energy in the form of methane.

The First Study on the Reactivity of Water Vapor in Metal-Organic Frameworks with Platinum Nanocrystals.

We first studied the reactivity of H2 O vapor in metal-organic frameworks (MOFs) with Pt nanocrystals (NCs) through the water-gas shift (WGS) reaction. A water-stable MOF, UiO-66, serves as a highly effective support material for the WGS reaction compared with ZrO2 . The origin of the high catalytic performance was investigated using in situ IR spectroscopy. In addition, from a comparison of the catalytic activities of Pt on UiO-66, where Pt NCs are located on the surface of UiO-66 and Pt@UiO-66, where Pt NCs are coated with UiO-66, we found that the competitive effects of H2 O condensation and diffusion in the UiO-66 play important roles in the catalytic activity of Pt NCs. A thinner UiO-66 coating further enhanced the WGS reaction activity of Pt NCs by minimizing the negative effect of slow H2 O diffusion in UiO-66.

Generation and Reactivity of Electron-Rich Carbenes on the Surface of Catalytic Gold Nanoparticles.

The reactive nature of carbenes can be modulated, and ultimately reversed, by receiving additional electron density from a metal. Here, it is shown that Au nanoparticles (NPs) generate an electron-rich carbene on surface after transferring electron density to the carbonyl group of an in situ activated diazoacetate, as assessed by Fourier transformed infrared (FT-IR) spectroscopy, magic angle spinning nuclear magnetic resonance (MAS NMR), and Raman spectroscopy. Density functional theory (DFT) calculations support the observed experimental values and unveil the participation of at least three different Au atoms during carbene stabilization. The surface stabilized carbene shows an extraordinary stability against nucleophiles and reacts with electrophiles to give new products. These findings showcase the ability of catalytic Au NPs to inject electron density in energetically high but symmetrically allowed valence orbitals of sluggish molecules.

Generation of subnanometric platinum with high stability during transformation of a 2D zeolite into 3D.

Single metal atoms and metal clusters have attracted much attention thanks to their advantageous capabilities as heterogeneous catalysts. However, the generation of stable single atoms and clusters on a solid support is still challenging. Herein, we report a new strategy for the generation of single Pt atoms and Pt clusters with exceptionally high thermal stability, formed within purely siliceous MCM-22 during the growth of a two-dimensional zeolite into three dimensions. These subnanometric Pt species are stabilized by MCM-22, even after treatment in air up to 540 °C. Furthermore, these stable Pt species confined within internal framework cavities show size-selective catalysis for the hydrogenation of alkenes. High-temperature oxidation-reduction treatments result in the growth of encapsulated Pt species to small nanoparticles in the approximate size range of 1 to 2 nm. The stability and catalytic activity of encapsulated Pt species is also reflected in the dehydrogenation of propane to propylene.

Corrigendum: Generation of subnanometric platinum with high stability during transformation of a 2D zeolite into 3D.

This corrects the article DOI: 10.1038/nmat4757.

Stabilized naked sub-nanometric Cu clusters within a polymeric film catalyze C-N, C-C, C-O, C-S, and C-P bond-forming reactions.

Sub-nanometric Cu clusters formed by endogenous reduction of Cu salts and Cu nanoparticles are active and selective catalysts for C-N, C-C, C-O, C-S, and C-P bond-forming reactions. Sub-nanometric Cu clusters have also been generated within a polymeric film and stored with full stability for months. In this way, they are ready to be used on demand and maintain high activity (TONs up to 10(4)) and selectivity for the above reactions. A potential mechanism for the formation of the sub-nanometric clusters and their electronic nature is presented.

Gold-copper nanoalloys supported on TiO2 as photocatalysts for CO2 reduction by water.

Commercial P25 modified by Au-Cu alloy nanoparticles as thin film exhibits, for CO2 reduction by water under sun simulated light, a rate of methane production above 2000 µmol (g of photocatalyst)(-1) h(-1). Although evolution of hydrogen is observed and O2 and ethane detected, the selectivity of conduction band electrons for methane formation is almost complete, about 97%. This photocatalytic behavior is completely different from that measured for Au/P25 (hydrogen evolution) and Cu/P25 (lower activity, but similar methane selectivity). Characterization by TEM, XPS, and UV-vis spectroscopy shows that Au and Cu are alloyed in the nanoparticles. FT-IR spectroscopy and chemical analysis have allowed one to detect on the photocatalyst surface the presence of CO2(•-), Cu-CO, and elemental C. Accordingly, a mechanism in which the role of Au is to respond under visible light and Cu binds to CO and directs the reduction pathway is proposed.

Oxidation of 5-Hydroxymethylfurfural into 2,5-Diformylfuran on Alkali Doped Ru/C Catalysts. Electron Properties of Ruthenium Species as Descriptor of Catalytic Activity.

Selective aerobic oxidation of 5-hydroxymethylfurfural into 2,5-diformylfuran has been achieved on alkali doped Ru/C catalyst. Optimization of Ru metal nanoparticles, as well as the nature and amount of the alkali dopant have been performed. The results showed that doping the Ru/C catalyst with controlled amount of potassium increases the catalytic activity, 2.5 fold with respect to the non-doped sample. Spectroscopic studies showed that these differences in activity can be attributed to a different oxidation reaction mechanism associated to the presence of electron rich Ru species in the promoted sample that facilitate the dissociation of O2, while prevents the oxidation of the metal. The Ru/C-K doped catalyst resulted very stable against leaching and metal sintering, being possible the reuse over several consecutive runs. Moreover, the catalyst could be successfully applied to the oxidation of different alcohols.

Stabilization of the Active Ruthenium Oxycarbonate Phase for Low-Temperature CO2 Methanation.

Interstitial carbon-doped RuO2 catalyst with the newly reported ruthenium oxycarbonate phase is a key component for low-temperature CO2 methanation. However, a crucial factor is the stability of interstitial carbon atoms, which can cause catalyst deactivation when removed during the reaction. In this work, the stabilization mechanism of the ruthenium oxycarbonate active phase under reaction conditions is studied by combining advanced operando spectroscopic tools with catalytic studies. Three sequential processes: carbon diffusion, metal oxide reduction, and decomposition of the oxycarbonate phase and their influence by the reaction conditions, are discussed. We present how the reaction variables and catalyst composition can promote carbon diffusion, stabilizing the oxycarbonate catalytically active phase under steady-state reaction conditions and maintaining catalyst activity and stability over long operation times. In addition, insights into the reaction mechanism and a detailed analysis of the catalyst composition that identifies an adequate balance between the two phases, i.e., ruthenium oxycarbonate and ruthenium metal, are provided to ensure an optimum catalytic behavior.

Doped graphene as a metal-free carbocatalyst for the selective aerobic oxidation of benzylic hydrocarbons, cyclooctane and styrene.

Nitrogen (N)-, boron (B)-, and boron,nitrogen (B,N)-doped graphene (G) act as carbocatalysts, promoting the aerobic oxidation of the benzylic positions of aromatic hydrocarbons and cyclooctane to the corresponding alcohol/ketone mixture with more than 90 % selectivity. The most active material was the co-doped (B,N)G, which, in the absence of solvent and with a substrate/(B,N)G ratio of 200, achieved 50 % tetralin conversion in 24 h with a alcohol/ketone selectivity of 80 %. An FT-Raman spectroscopic study of a sample of (B,N)G heated at 100 °C in the presence of oxygen revealed new bands that disappeared upon evacuation and that have been attributed to hydroperoxide-like species formed on the G sheet based on the isotopic shift of the peak from 819 to 779 cm(-1) when (18)O2 was used as the oxidizing reagent. Furthermore, (B)G and (N)G exhibited high catalytic activity in the aerobic oxidation of styrene to benzaldehyde (BA) in 4 h. However, the product distribution changed over time and after 10 h a significant percentage of styrene oxide (SO) was observed under the same conditions. The use of doped G as catalyst appears to offer broad scope for the aerobic oxidation of benzylic compounds and styrene, for which low catalyst loading, mild reaction temperatures, and no additional solvents are required.