Electrochemical and Spectroscopic Studies Performed for Indomethacin and 1-Naphthol Incorporated in 1-Butyl-3-methyl-imidazolium Bis(2-ethylhexyl) Sulfosuccinate Vesicles to Investigate Them as a Potentially pH-Sensitive Nanocarrier.

Characterization studies of 1-butyl-3-methyl-imidazolium bis(2-ethylhexyl) sulfosuccinate vesicles at different pH values have been carried out by using liquid surface tension, transmission electron microscopy, and dynamic light scattering. The results show that there are no vesicle changes in its size and negative Z potential at pH 3, 6, and 10. Furthermore, indomethacin and 1-naphthol, both pH-dependent, electroactive, and fluorescence probes, were used to further characterize the bilayer employing electrochemical and emission techniques. The partition of indomethacin and 1-naphthol between the water and bilayer pseudophases only occurs for the neutral species and does not happen for the anionic species because the highly negative Z bilayer potential prevents incorporation due to negative repulsion. For the neutral species, the partition constant values were evaluated by square wave voltammetry and emission spectroscopy. Finally, for the indomethacin incorporated into the vesicle bilayer at pH 3, the release profile was monitored over time at pH 6. It was found that a change in the pH values causes the complete release of indomethacin after 25 min, which led us to think that the vesicles presented in this work can be used as a pH-sensitive nanocarrier for neutral pH-sensitive drugs.

PRODAN Photophysics as a Tool to Determine the Bilayer Properties of Different Unilamellar Vesicles Composed of Phospholipids.

Vesicles formed by phospholipids are promising candidates for drug delivery. It is known that the lipid composition affects properties such as the rigidity-fluidity of the membrane and that it influences the bilayer permeability, but sometimes sophisticated techniques are selected to monitor them. In this work, we study the bilayer of different unilamellar vesicles composed of different lipids (1,2-dioleoyl-sn-glycero-3-phosphocholine, DOPC, and lecithin) and diverse techniques such as extruder and electrospun templates and using 6-propionyl-2-(N,N-dimethyl) aminonaphthalene (PRODAN) and its photophysics. Moreover, we were able to monitor the influence of cholesterol on the bilayers. We demonstrate that the bilayer properties can be evaluated using the emission feature of the molecular probe PRODAN. This fluorescent probe gives relevant information on the polarity and fluidity of the microenvironment for unilamellar vesicles formed by two different methods. The PRODAN emission at 434 nm suggests that the bilayer properties significantly change if DOPC or lecithin is used in the vesicle preparation especially in their fluidity. Moreover, cholesterol induces alterations in the bilayer's structural and microenvironmental properties to a greater or lesser degree in both vesicles. Thus, we propose an easy and elegant way to evaluate physicochemical properties, which is fundamental for manufacturing vesicles as a drug delivery system, simply by monitoring the molecular probe emission band centered at 434 nm, which corresponds to the PRODAN species deep inside the bilayer.

Amphiphilic Ionic Liquids Capable to Formulate Organized Systems in an Aqueous Solution, Designed by a Combination of Traditional Surfactants and Commercial Drugs.

The present review describes the state of the art in the conversion of pharmaceutically active ingredients (API) in amphiphilic Ionic Liquids (ILs) as alternative drug delivery systems. In particular, we focus our attention on the compounds generated by ionic exchange and without original counterions which generate different systems in comparison with the simple mixtures. In water, these new amphiphiles show similar or even better properties as surfactants in comparison with their precursors. Cations such as 1-alkyl-3-methyl-imidazolium and anions such as dioctyl sulfosuccinate or sodium dodecyl sulfate appear as the amphiphilic components most studied. In conclusion, this work shows interesting information on several promissory compounds and they appear as an interesting challenge to extend the application of ILs in the medical field.

Is it Necessary for the Use of Fluorinated Compounds to Formulate Reverse Micelles in a Supercritical Fluid? Searching the Best Cosurfactant to Create "Green" AOT Reverse Micelle Media.

Herein, we report the effect of employing two different alcohols, such as n-pentanol and 2,2,3,3,4,4,5,5-octafluoro pentanol (from now on F-pentanol), into 1,4-bis-2-ethylhexylsulfosuccinate (AOT) reverse micelles (RMs), to determine the interfacial activity and establish the best candidate to act as a cosurfactant in supercritical RMs. Dynamic light scattering (DLS), Fourier transform infrared (FT-IR), and fluorescence emission spectroscopy allowed us to determine and understand the behavior of alkanols in RMs. As a result, we found interesting displacements of alkanol molecules within the RMs, suggesting that the electrostatic interaction between SO3- and Na+ weakens because of new interactions of n-pentanol with SO3- through H-bonds, changing the curvature of the micellar interface. According to FT-IR and DLS studies, F-pentanol forms a RM polar core interacting through intermolecular H-bonds, suggesting no perturbations of the AOT RM interface. Hence, n-pentanol was selected as a cosurfactant to form supercritical RMs, which is confirmed by red edge excitation shift studies, using C343 as a molecular probe. Herein, we were able to create RMs under supercritical conditions without the presence of modified surfactants, fluorinated or multitailed compounds, which, to the best of our knowledge, was not shown before.

How the external solvent in biocompatible reverse micelles can improve the alkaline phosphatase behavior.

In the last decade, the nature of the nonpolar solvents that can be part of reverse micelles (RMs) has been the topic of several investigations to improve their applications. In this sense, the hydrolysis of 1-naphthyl phosphate catalyzed by the enzyme alkaline phosphatase (AP) was used as a probe to investigate the effect of the change of the external solvent on RMs formulated with the anionic surfactant sodium diethylhexyl sulfosuccinate (AOT). As external nonpolar solvents, two biocompatible lipophilic esters, isopropyl myristate and methyl laurate, and the traditional nonpolar solvents, n-heptane and benzene, were used. The results were compared among the RMs investigated and with the reaction in homogeneous media. Thus, the effect of the nanoconfinement as well as the impact of the replacement of a conventional external nonpolar solvent by biocompatible solvents were analyzed. The results indicate that the catalytic efficiency in the AOT RMs is larger than that in homogeneous media, denoting a different hydration level over the AP enzyme, which is directly related to the different degrees of nonpolar solvent penetration to the RM interface. Our findings demonstrated that toxic solvents such as n-heptane and benzene can be replaced by nontoxic ones (isopropyl myristate or methyl laurate) in AOT RMs without affecting the performance of micellar systems as nanoreactors, making them a green and promising alternative toward efficient and sustainable chemistry.

Influence of the AOT Counterion Chemical Structure on the Generation of Organized Systems.

The impact of the imidazolium counterion structure on the organized systems formed by the surfactant 1,4-bis-2-ethylhexylsulfosuccinate, AOT, both in aqueous solutions and in nonpolar solvents is investigated. With this in mind, we investigated if the ionic liquid-like (IL-like) surfactant 1-ethyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate, emim-AOT, forms direct micelles or vesicles in water. Dynamic light scattering, zeta potential, conductivity, fluorescence spectroscopy, and UV-visible spectroscopy measurements were performed to characterize the organized systems in aqueous solutions. We also studied the self-aggregation of emim-AOT, 1-butyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate, bmim-AOT, and of 1-hexyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate, hmim-AOT, in nonpolar solvents. The results obtained showed that the IL-like surfactant emim-AOT forms direct micelles in water, as sodium 1,4-bis-2-ethylhexylsulfosuccinate (Na-AOT) does. However, emim-AOT aggregates are larger, have a lower surface charge, are more stable, and have a more polar and less fluid micellar interface than Na-AOT micelles. It was also observed that emim-AOT and hmim-AOT form reverse micelles in nonpolar solvents. The size of the imidazolium cations dramatically influences the size of the reverse micelles and their ability to solubilize water.

Use of Ionic Liquids-like Surfactants for the Generation of Unilamellar Vesicles with Potential Applications in Biomedicine.

The goal of this work is to understand the influence of the counterion nature on the organized systems formed by 1,4-bis-2-ethylhexylsulfosuccinate surfactants in aqueous solutions and how these aggregates will influence the deoxyribonucleic acid (DNA)-surfactant interactions. With this in mind, two ionic liquid-like surfactants were investigated: 1-butyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate (bmim-AOT) and 1-hexyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate (hmim-AOT). Measurements of dynamic light scattering, ζ-potential, transmission electron microscopy, and fluorescence and UV-visible spectroscopy were performed to study the characteristics of the vesicles formed by bmim-AOT and hmim-AOT. Regarding the determination of the interaction of the surfactants with DNA, circular dichroism was used. The results obtained showed that bmim-AOT and hmim-AOT ionic liquid-like surfactants spontaneously form unilamellar vesicles in water at very low surfactant concentrations. The characteristics of these aggregates are dependent on the length of the tail of the counterions. The length of the hydrophobic chains of the counterions also influences the DNA-surfactant interactions through hydrophobic effects.

Interfacial Dynamics and Its Relations with ?Negative? Surface Viscosities Measured at Water?Air Interfaces Covered with a Cationic Surfactant.

We studied the dynamics of a cationic surfactant monolayer, Gemini 12-2-12, at the air?water interface for surfactant aqueous solutions at concentrations below the critical micelle concentration. We present surface rheology experiments performed in a Langmuir trough by the oscillatory barrier technique. From these, we found negative surface viscosities at certain frequencies. We demonstrate that this unphysical result is a consequence of an unconsidered surfactant dynamics within the interfacial region. By surface pressure relaxation experiments, after a sudden modification of the interfacial area and by dynamic surface tension and surface potential measurements, several relaxation phenomena and relaxation times were identified. We found that surfactant adsorption and desorption processes are asymmetric: the characteristic times and the number of processes involved in the mechanisms of adsorption and desorption are different. This asymmetry invalidates the usual data analysis procedure that leads to the negative viscosities. Similar mechanisms could be at the origin of the negative viscosities reported in other systems, a possibility that remains to be explored.

Interfacial properties modulated by the water confinement in reverse micelles created by the ionic liquid-like surfactant bmim-AOT.

The behavior of the interfacial water entrapped in reverse micelles (RMs) that were formed by the ionic liquid-like surfactant 1-butyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate (bmim-AOT) was investigated with the use of UV-Vis absorption spectroscopy and nuclear magnetic resonance (NMR) relaxometry. The solvatochromism of two molecular probes, namely, 1-methyl-8-oxyquinolinium betaine (QB) and N,N,N',N'-tetramethylethylenediamine copper(ii)acetylacetonate tetraphenylborate ([Cu(acac)(tmen)][B(C6H5)4]), was investigated. As a comparison, the analog RMs formed by sodium 1,4-bis-2-ethylhexylsulfosuccinate (Na-AOT) were also explored. By varying the water content inside the RMs and consequently the different magnitude of the water-surfactant interactions at the interface, interesting properties were observed by comparing bmim-AOT and Na-AOT RMs. From the solvatochromic behavior of ([Cu(acac)(tmen)][B(C6H5)4]), we found that the interface in bmim-AOT RMs shows a smaller electron donating capacity than that in Na-AOT RMs. QB revealed that the interfacial region is a weaker hydrogen bond donor and less polar than the corresponding Na-AOT RMs. NMR experiments showed that the molecular motion of water in bmim-AOT RMs is less restricted than that of the water molecules confined in Na-AOT RMs. In summary, the results show how the nature of the bmim+ cation affects the interaction between the entrapped water and the RM interface, greatly modifying the interfacial water structure in comparison with the results known for Na-AOT.

Catanionic Reverse Micelles as an Optimal Microenvironment To Alter the Water Electron Donor Capacity in a SN2 Reaction.

The effect of interfacial water entrapped in two types of catanionic reverse micelles (RMs) on the kinetic parameters of the SN2 reaction between dimethyl-4-nitrophenylsulfonium trifluoromethanesulfonate (S+) and n-butylamine (BuNH2) was explored. Two catanionic surfactants, composed of a mixture of oppositely charged ionic surfactants without their original counterions, were used to create the RMs. Thus, benzyl- n-hexadecyldimethylammonium 1,4-bis(2-ethylhexyl) sulfosuccinate (BHD-AOT) and cetyltrimethylammonium 1,4-bis(2-ethylhexyl) sulfosuccinate (CTA-AOT) were formed. Also, the well-known anionic surfactant sodium 1,4-bis(2-ethylhexyl) sulfosuccinate (Na-AOT) was employed as a comparison. Our results showed an important catalytic-like effect of all RMs investigated in comparison with a water-benzene mixture, and the rate constant values depend on the type of surfactant used. Faster reaction in BHD-AOT RMs than in CTA-AOT and Na-AOT RMs was observed. This behavior was attributed to the strong interaction (by hydrogen bonding with AOT anion and ion-dipole interaction with BHD+) between the entrapped water and the BHD-AOT interface, which reduces the solvation capacity of water on S+. In CTA-AOT (and Na-AOT) RMs, the water-interface interaction is weaker and the electron pairs of water can solvate S+ ions. In summary, the chemical structure of the counterion on the catanionic surfactant alters the interfacial region, allowing the progress of a reaction inside the RMs to be controlled.

Micropolarity and Hydrogen-Bond Donor Ability of Environmentally Friendly Anionic Reverse Micelles Explored by UV/Vis Absorption of a Molecular Probe and FTIR Spectroscopy.

In the present work we show how two biocompatible solvents, methyl laurate (ML) and isopropyl myristate (IPM), can be used as a less toxic alternative to replace the nonpolar component in a sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT) reverse micelles (RMs) formulation. In this sense, the micropolarity and the hydrogen-bond ability of the interface were monitored through the use of the solvatochromism of a molecular probe (1-methyl-8-oxyquinolinium betaine, QB) and Fourier transform infrared spectroscopy (FTIR). Our results demonstrate that the micropolarity sensed by QB in ML RMs is lower than in IPM RMs. Additionally, the water molecules form stronger H-bond interactions with the polar head of AOT in ML than in IPM. By FTIR was revealed that more water molecules interact with the interface in ML/AOT RMs. On the other hand, for AOT RMs generated in IPM, the weaker water-surfactant interaction allows the water molecules to establish hydrogen bonds with each other trending to bulk water more easily than in ML RMs, a consequence of the dissimilar penetration of nonpolar solvents into the interfacial region. The penetration process is strongly controlled by the polarity and viscosity of the external solvents. All of these results allow us to characterize these biocompatible systems, providing information about interfacial properties and how they can be altered by changing the external solvent. The ability of the nontoxic solvent to penetrate or not into the AOT interface produces a new interface with attractive properties.

Determination of Benzyl-hexadecyldimethylammonium 1,4-Bis(2-ethylhexyl)sulfosuccinate Vesicle Permeability by Using Square Wave Voltammetry and an Enzymatic Reaction.

This report describes the studies performed to determine the permeability coefficient value (P) of 1-naphthyl phosphate (1-NP) through the benzyl-hexadecyldimethylammonium 1,4-bis(2-ethylhexyl)sulfosuccinate (AOT-BHD) vesicle bilayer. 1-NP was added in the external phase and must cross the bilayer of the vesicle to react with the encapsulated enzyme (alkaline phosphatase) to yield 1-naphtholate (NPh-), the product of the enzymatic hydrolysis. This product is electrochemically detected, at basic pH value, by a square wave voltammetry technique, which can be a good alternative over the spectroscopic one, to measure the vesicle solutions because scattering (due to its turbidity) does not make any influence in the electrochemical signal. The experimental data allow us to propose a mathematical model, and a value of P = (1.00 ± 0.15) × 10-9 cm s-1 was obtained. Also, a value of P = (2.0 ± 0.5) × 10-9 cm s-1 was found by using an independent technique, ultraviolet-visible spectroscopy, for comparison. It is evident that the P values obtained from both the techniques are comparable (within the experimental error of both techniques) under the same experimental conditions. This study constitutes the first report of the 1-NP permeability determination in this new vesicle. We want to highlight the importance of the introduction of a new method and the electrochemical response of the product generated through an enzymatic reaction that occurs in the inner aqueous phase of the vesicle, where the enzyme is placed.

Square Wave Voltammetry: An Alternative Technique to Determinate Piroxicam Release Profiles from Nanostructured Lipid Carriers.

A new, simple, and fast electrochemical (EC) method has been developed to determine the release profile of piroxicam, a nonsteroidal anti-inflammatory drug, loaded in a drug delivery system based on nanostructured lipid carriers (NLCs). For the first time, the samples were analyzed by using square wave voltammetry, a sensitive EC technique. The piroxicam EC responses allow us to propose a model that explains the experimental results and to subsequently determine the amount of drug loaded into the NLCs formulation as a function of time. In vitro drug release studies showed prolonged drug release (up to 5 days), releasing 60 % of the incorporated drug. The proposed method is a promising and stable alternative for the study of different drug delivery systems.

Effect of Confinement on the Properties of Sequestered Mixed Polar Solvents: Enzymatic Catalysis in Nonaqueous 1,4-Bis-2-ethylhexylsulfosuccinate Reverse Micelles.

The influence of different glycerol, N,N-dimethylformamide (DMF) and water mixtures encapsulated in 1,4-bis-2-ethylhexylsulfosuccinate (AOT)/n-heptane reverse micelles (RMs) on the enzymatic hydrolysis of 2-naphthyl acetate by α-chymotrypsin is demonstrated. In the case of the mixtures with DMF and protic solvents it has been previously shown, using absorption, emission and dynamic light-scattering techniques, that solvents are segregated inside the polar core of the RMs. Protic solvents anchor to the AOT, whereas DMF locates to the polar core of the aggregate. Thus, DMF not only helps to solubilize the hydrophobic substrate, increasing its effective concentrations but surprisingly, it does not affect the enzyme activity. The importance of ensuring the presence of RMs, encapsulation of the polar solvents and the corrections by substrate partitioning in order to obtain reliable conclusions is highlighted. Moreover, the effect of a constrained environment on solvent-solvent interactions in homogenous media and its impact on the use of RMs as nanoreactors is stressed.

Nanoscale Control Over Interfacial Properties in Mixed Reverse Micelles Formulated by Using Sodium 1,4-bis-2-ethylhexylsulfosuccinate and Tri-n-octyl Phosphine Oxide Surfactants.

The interfacial properties of pure reverse micelles (RMs) are a consequence of the magnitude and nature of noncovalent interactions between confined water and the surfactant polar head. Addition of a second surfactant to form mixed RMs is expected to influence these interactions and thus affect these properties at the nanoscale level. Herein, pure and mixed RMs stabilized by sodium 1,4-bis-2-ethylhexylsulfosuccinate and tri-n-octyl phosphine oxide (TOPO) surfactants in n-heptane were formulated and studied by varying both the water content and the TOPO mole fraction. The microenvironment generated was sensed by following the solvatochromic behavior of the 1-methyl-8-oxyquinolinium betaine probe and (31) P NMR spectroscopy. The results reveal unique properties of mixed RMs and we give experimental evidence that free water can be detected in the polar core of the mixed RMs at very low water content. We anticipate that these findings will have an impact on the use of such media as nanoreactors for many types of chemical reactions, such as enzymatic reactions and nanoparticle synthesis.

How the cation 1-butyl-3-methylimidazolium impacts the interaction between the entrapped water and the reverse micelle interface created with an ionic liquid-like surfactant.

The behavior of the interfacial water entrapped in reverse micelles (RMs) formed by the ionic liquid-like surfactant 1-butyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate (bmim-AOT) dissolved in benzene (or chlorobenzene) was investigated using noninvasive techniques such as dynamic light scattering (DLS), static light scattering (SLS), FT-IR and (1)H NMR. The DLS and SLS results reveal the formation of discrete spherical and non-interacting water droplets stabilized by the bmim-AOT surfactant. Moreover, since the droplet size increases as the W0 (W0 = [water]/[surfactant]) value increases, water interacts with the RM interface. From FT-IR and (1)H NMR data, a weaker water-surfactant interaction in bmim-AOT RMs in comparison with the RMs created by sodium 1,4-bis-2-ethylhexylsulfosuccinate (Na-AOT) is detected. Consequently, there are less water molecules interacting with the interface in bmim-AOT RMs, and their hydrogen bond network is not completely disrupted as they are in Na-AOT RMs. The results show how the nature of the new cation impacts the interaction between the entrapped water and the RM interface, modifying the interfacial water structure in comparison with the results known for Na-AOT.

A protic ionic liquid, when entrapped in cationic reverse micelles, can be used as a suitable solvent for a bimolecular nucleophilic substitution reaction.

In this work, we have explored how the confinement of the protic ionic liquid (IL) ethylammonium nitrate (EAN) inside toluene/benzyl-n-hexadecyldimethylammonium chloride (BHDC) reverse micelles (RMs) affects the Cl(-) nucleophilicity on the bimolecular nucleophilic substitution (SN2) reaction between this anion and dimethyl-4-nitrophenylsulfonium trifluoromethanesulfonate. To the best of our knowledge this is the first report where toluene/BHDC RMs use EAN as a polar component and it is used as a nanoreactor for carrying out kinetic experiments. Dynamic light scattering results reveal the formation of RMs containing the protic IL. The kinetic results show that upon confinement, EAN becomes a suitable solvent for the SN2 reaction while in homogeneous media it is a bad option. Entrapped in BHDC RMs, due to the strong hydrogen bond interactions, EAN behaves as an aprotic-like IL which cannot deactivate the nucleophilic power of Cl(-) and yet increases the substrate solubility. These facts show the versatility of this kind of organized system to alter the polar solvent entrapped and its influence on the reaction rate when it is used as a nanoreactor.

Droplet-droplet interactions investigated using a combination of electrochemical and dynamic light scattering techniques. The case of water/BHDC/benzene:n-heptane system.

In this contribution the electrochemistry of [Fe(CN)6](4-/3-) as the probe molecule was investigated in benzyl-n-hexadecyldimethylammonium chloride (BHDC) reverse micelles (RMs) varying the composition of the external solvent (benzene:n-heptane mixtures) and the surfactant concentration, at a fixed water content and probe concentration. The electrochemical and dynamic light scattering results show that in water/BHDC/benzene:n-heptane systems the aggregate sizes increase on increasing BHDC concentration. This behavior was unexpected since it is known that for water/BHDC/benzene RM systems keeping the water content constant and the surfactant concentration below 0.2 M, the droplet sizes are independent of the concentration of the surfactant. We explain the results considering that on changing the external solvent to benzene:n-heptane mixtures, RMs tend to associate in clusters and equilibrium between free RMs and droplet clusters is established. A model is presented which, using electrochemical and dynamic light scattering data, allows calculating the aggregation number of the RMs, the number of RMs that form the droplet clusters and the standard electron transfer heterogeneous rate constant.

Singularities in the physicochemical properties of spontaneous AOT-BHD unilamellar vesicles in comparison with DOPC vesicles.

In the present work, we study different physicochemical properties of the spontaneous unilamellar vesicles created by the catanionic ionic liquid-like surfactant benzyl-n-hexadecyldimethylammonium 1,4-bis-2-ethylhexylsulfosuccinate (AOT-BHD), using two different fluorescent probes: 6-propionyl-2-(dimethylaminonaphthalene), PRODAN and trans-4-[4-(dimethylamino)-styryl]-1-methylpyridinium iodide, HC. Steady-state and time resolved fluorescence emission spectroscopy allowed us to find the unique properties of the AOT-BHD bilayer in comparison with vesicles formed using the traditional phospholipid 1,2-di-oleoyl-sn-glycero-3-phosphatidylcholine, DOPC. From the emission results, we observed that the region of the bilayer close to the polar head of AOT-BHD is a powerful electron donor environment, even larger than DOPC. Additionally, the AOT-BHD bilayer offers a less polar and slightly more viscous zone than DOPC. Thus, this particular bilayer is able to produce large incorporation of ionic and nonionic molecules and is very promising to be used as a nanocarrier in pharmacological, cosmetic and food fields.

Effect of the cationic surfactant moiety on the structure of water entrapped in two catanionic reverse micelles created from ionic liquid-like surfactants.

The behavior of water entrapped in reverse micelles (RMs) formed by two catanionic ionic liquid-like surfactants, benzyl-n-hexadecyldimethylammonium 1,4-bis-2-ethylhexylsulfosuccinate (AOT-BHD) and cetyltrimethylammonium 1,4-bis-2-ethylhexylsulfosuccinate (AOT-CTA), was investigated by using dynamic (DLS) and static (SLS) light scattering, FTIR, and (1)H NMR spectroscopy techniques. To the best of our knowledge, this is the first report in which AOT-CTA has been used to create RMs and encapsulate water. DLS and SLS results revealed the formation of RMs in benzene and the interaction of water with the RM interface. From FTIR and (1)H NMR spectroscopy data, a difference in the magnitude of the water-catanionic surfactant interaction at the interface is observed. For the AOT-BHD RMs, a strong water-surfactant interaction can be invoked whereas for AOT-CTA this interaction seems to be weaker. Consequently, more water molecules interact with the interface in AOT-BHD RMs with a completely disrupted hydrogen-bond network, than in AOT-CTA RMs in which the water structure is partially preserved. We suggest that the benzyl group present in the BHD(+) moiety in AOT-BHD is responsible for the behavior of the catanionic interface in comparison with the interface created in AOT-CTA. These results show that a simple change in the cationic component in the catanionic surfactant promotes remarkable changes in the RMs interface with interesting consequences, in particular when using the systems as nanoreactors.