UNRES-GPU for physics-based coarse-grained simulations of protein systems at biological time- and size-scales.

SUMMARY: The UNited RESisdue (UNRES) package for coarse-grained simulations, which has recently been optimized to treat large protein systems, has been implemented on Graphical Processor Units (GPUs). An over 100-time speed-up of the GPU code (run on an NVIDIA A100) with respect to the sequential code and an 8.5 speed-up with respect to the parallel Open Multi-Processing (OpenMP) code (run on 32 cores of 2 AMD EPYC 7313 Central Processor Units (CPUs)) has been achieved for large proteins (with size over 10 000 residues). Due to the averaging over the fine-grain degrees of freedom, 1 time unit of UNRES simulations is equivalent to about 1000 time units of laboratory time; therefore, millisecond time scale of large protein systems can be reached with the UNRES-GPU code. AVAILABILITY AND IMPLEMENTATION: The source code of UNRES-GPU along with the benchmarks used for tests is available at https://projects.task.gda.pl/eurohpcpl-public/unres.

Assessment of Two Restraint Potentials for Coarse-Grained Chemical-Cross-Link-Assisted Modeling of Protein Structures.

The influence of distance restraints from chemical cross-link mass spectroscopy (XL-MS) on the quality of protein structures modeled with the coarse-grained UNRES force field was assessed by using a protocol based on multiplexed replica exchange molecular dynamics, in which both simulated and experimental cross-link restraints were employed, for 23 small proteins. Six cross-links with upper distance boundaries from 4 Å to 12 Å (azido benzoic acid succinimide (ABAS), triazidotriazine (TATA), succinimidyldiazirine (SDA), disuccinimidyl adipate (DSA), disuccinimidyl glutarate (DSG), and disuccinimidyl suberate (BS3)) and two types of restraining potentials ((i) simple flat-bottom Lorentz-like potentials dependent on side chain distance (all cross-links) and (ii) distance- and orientation-dependent potentials determined based on molecular dynamics simulations of model systems (DSA, DSG, BS3, and SDA)) were considered. The Lorentz-like potentials with properly set parameters were found to produce a greater number of higher-quality models compared to unrestrained simulations than the MD-based potentials, because the latter can force too long distances between side chains. Therefore, the flat-bottom Lorentz-like potentials are recommended to represent cross-link restraints. It was also found that significant improvement of model quality upon the introduction of cross-link restraints is obtained when the sum of differences of indices of cross-linked residues exceeds 150.

Long-time scale simulations of virus-like particles from three human-norovirus strains.

The dynamics of the virus like particles (VLPs) corresponding to the GII.4 Houston, GII.2 SMV, and GI.1 Norwalk strains of human noroviruses (HuNoV) that cause gastroenteritis was investigated by means of long-time (about 30 µs in the laboratory timescale) molecular dynamics simulations with the coarse-grained UNRES force field. The main motion of VLP units turned out to be the bending at the junction between the P1 subdomain (that sits in the VLP shell) and the P2 subdomain (that protrudes outside) of the major VP1 protein, this resulting in a correlated wagging motion of the P2 subdomains with respect to the VLP surface. The fluctuations of the P2 subdomain were found to be more pronounced and the P2 domain made a greater angle with the normal to the VLP surface for the GII.2 strain, which could explain the inability of this strain to bind the histo-blood group antigens (HBGAs).

Optimization of parallel implementation of UNRES package for coarse-grained simulations to treat large proteins.

We report major algorithmic improvements of the UNRES package for physics-based coarse-grained simulations of proteins. These include (i) introduction of interaction lists to optimize computations, (ii) transforming the inertia matrix to a pentadiagonal form to reduce computing and memory requirements, (iii) removing explicit angles and dihedral angles from energy expressions and recoding the most time-consuming energy/force terms to minimize the number of operations and to improve numerical stability, (iv) using OpenMP to parallelize those sections of the code for which distributed-memory parallelization involves unfavorable computing/communication time ratio, and (v) careful memory management to minimize simultaneous access of distant memory sections. The new code enables us to run molecular dynamics simulations of protein systems with size exceeding 100,000 amino-acid residues, reaching over 1 ns/day (1 µs/day in all-atom timescale) with 24 cores for proteins of this size. Parallel performance of the code and comparison of its performance with that of AMBER, GROMACS and MARTINI 3 is presented.

UNRES-Dock-protein-protein and peptide-protein docking by coarse-grained replica-exchange MD simulations.

MOTIVATION: The majority of the proteins in living organisms occur as homo- or hetero-multimeric structures. Although there are many tools to predict the structures of single-chain proteins or protein complexes with small ligands, peptide-protein and protein-protein docking is more challenging. In this work, we utilized multiplexed replica-exchange molecular dynamics (MREMD) simulations with the physics-based heavily coarse-grained UNRES model, which provides more than a 1000-fold simulation speed-up compared with all-atom approaches to predict structures of protein complexes. RESULTS: We present a new protein-protein and peptide-protein docking functionality of the UNRES package, which includes a variable degree of conformational flexibility. UNRES-Dock protocol was tested on a set of 55 complexes with size from 43 to 587 amino-acid residues, showing that structures of the complexes can be predicted with good quality, if the sampling of the conformational space is sufficient, especially for flexible peptide-protein systems. The developed automatized protocol has been implemented in the standalone UNRES package and in the UNRES server. AVAILABILITY AND IMPLEMENTATION: UNRES server: http://unres-server.chem.ug.edu.pl; UNRES package and data used in testing of UNRES-Dock: http://unres.pl. SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

Theoretical Investigation of the Coronavirus SARS-CoV-2 (COVID-19) Infection Mechanism and Selectivity.

The SARS-CoV-2 virus, commonly known as COVID-19, first occurred in December 2019 in Wuhan, Hubei Province, China. Since then, it has become a tremendous threat to human health. With a pandemic threat, it is in the significant interest of the scientific world to establish its method of infection. In this manuscript, we combine knowledge of the infection mechanism with theoretical methods to answer the question of the virus's selectivity. We proposed a two-stage infection mechanism. In the first step, the virus interacts with the ACE2 receptor, with the "proper strength". When the interaction is too strong, the virus will remain in an "improper position"; if the interaction is too weak, the virus will "run away" from the cell. We also indicated three residues (positions 30, 31, and 353) located on the ACE2 protein-binding interface, which seems to be crucial for successful infection. Our results indicate that these residues are necessary for the initiation of the infection process.

Prediction of protein assemblies, the next frontier: The CASP14-CAPRI experiment.

We present the results for CAPRI Round 50, the fourth joint CASP-CAPRI protein assembly prediction challenge. The Round comprised a total of twelve targets, including six dimers, three trimers, and three higher-order oligomers. Four of these were easy targets, for which good structural templates were available either for the full assembly, or for the main interfaces (of the higher-order oligomers). Eight were difficult targets for which only distantly related templates were found for the individual subunits. Twenty-five CAPRI groups including eight automatic servers submitted ~1250 models per target. Twenty groups including six servers participated in the CAPRI scoring challenge submitted ~190 models per target. The accuracy of the predicted models was evaluated using the classical CAPRI criteria. The prediction performance was measured by a weighted scoring scheme that takes into account the number of models of acceptable quality or higher submitted by each group as part of their five top-ranking models. Compared to the previous CASP-CAPRI challenge, top performing groups submitted such models for a larger fraction (70-75%) of the targets in this Round, but fewer of these models were of high accuracy. Scorer groups achieved stronger performance with more groups submitting correct models for 70-80% of the targets or achieving high accuracy predictions. Servers performed less well in general, except for the MDOCKPP and LZERD servers, who performed on par with human groups. In addition to these results, major advances in methodology are discussed, providing an informative overview of where the prediction of protein assemblies currently stands.

Improved Consensus-Fragment Selection in Template-Assisted Prediction of Protein Structures with the UNRES Force Field in CASP13.

The method for protein-structure prediction, which combines the physics-based coarse-grained UNRES force field with knowledge-based modeling, has been developed further and tested in the 13th Community Wide Experiment on the Critical Assessment of Techniques for Protein Structure Prediction (CASP13). The method implements restraints from the consensus fragments common to server models. In this work, the server models to derive fragments have been chosen on the basis of quality assessment; a fully automatic fragment-selection procedure has been introduced, and Dynamic Fragment Assembly pseudopotentials have been fully implemented. The Global Distance Test Score (GDT_TS), averaged over our "Model 1" predictions, increased by over 10 units with respect to CASP12 for the free-modeling category to reach 40.82. Our "Model 1" predictions ranked 20 and 14 for all and free-modeling targets, respectively (upper 20.2% and 14.3% of all models submitted to CASP13 in these categories, respectively), compared to 27 (upper 21.1%) and 24 (upper 18.9%) in CASP12, respectively. For oligomeric targets, the Interface Patch Similarity (IPS) and Interface Contact Similarity (ICS) averaged over our best oligomer models increased from 0.28 to 0.36 and from 12.4 to 17.8, respectively, from CASP12 to CASP13, and top-ranking models of 2 targets (H0968 and T0997o) were obtained (none in CASP12). The improvement of our method in CASP13 over CASP12 was ascribed to the combined effect of the overall enhancement of server-model quality, our success in selecting server models and fragments to derive restraints, and improvements of the restraint and potential-energy functions.

Hydrophobic hydration and pairwise hydrophobic interaction of Lennard-Jones and Mie particles in different water models.

The study provides a deep computational analysis of the thermodynamic and structural features associated with the hydration of xenon, Xe, and its pairwise hydrophobic interaction (i.e., the potential of mean force, PMF), over a large temperature range. Xe is described both as a Lennard-Jones particle, LJ-Xe, and as a Mie particle, Mie-Xe (pseudo hard sphere). Three different water models are used: TIP3P-Ew, SPCE and TIP4P-2005. Mie-Xe is more hydrophobic than LJ-Xe due to the lack of the attractive energetic interactions with water molecules; its hydration, around room temperature, is opposed by a large and negative entropy change and a positive enthalpy change. The PMF of Mie-Xe is characterized by a deep minimum at contact distance whose depth increases with temperature, and whose magnitude is significantly larger than that obtained for LJ-Xe. The contact minimum configuration of Mie-Xe is favoured by a large positive entropy change and contrasted by a positive enthalpy change. These results are qualitatively the same regardless of the water model used. There is no clear connection between the values determined for the thermodynamic functions and the structural features of the hydration shells surrounding the single Mie-Xe and the couple of Mie-Xe particles in the contact minimum configuration. This confirms that the structural reorganization of water associated with such processes is characterized by an almost complete enthalpy-entropy compensation.

Extension of the force-matching method to coarse-grained models with axially symmetric sites to produce transferable force fields: Application to the UNRES model of proteins.

The force-matching approach to coarse graining, in which the forces that act on site centers are fitted to the respective average forces computed from all-atom molecular dynamics simulations, provides a link between coarse-grained and all-atom molecular dynamics. In the existing implementations, radial site-site interaction potentials are assumed, thus precluding extensive coarse-graining that usually requires anisotropic potentials. In this work, we extended the force-matching approach to coarse-grained models with axially symmetric sites and implemented it to the UNRES model of polypeptide chains developed in our laboratory, in which the only interaction sites are united peptide groups and united side chains, the α-carbon atoms serving as anchor points. The optimizable parameters were those of the UNRES energy function and not whole potential profiles, which provide better transferability. We tested the implementation with the 20-residue tryptophan-cage miniprotein, selected as the training protein, starting from the NEWCT-9P variant of UNRES. The reference forces were obtained from implicit- and explicit-solvent simulations. Using a target function composed of a force-matching term and a maximum-likelihood term that drives the force field at reproducing the NMR-determined conformational ensembles at three selected temperatures, force fields were obtained which did not produce site-site clashes for the structures simulated with all-atom molecular dynamics with AMBER, and modeled the structures of α-helical proteins with resolution comparable to that of the NEWCT-9P force field. The new force fields also produced the free-energy landscapes of tryptophan cage similar to those obtained from the all-atom molecular dynamics runs.

UNRES server for physics-based coarse-grained simulations and prediction of protein structure, dynamics and thermodynamics.

A server implementation of the UNRES package (http://www.unres.pl) for coarse-grained simulations of protein structures with the physics-based UNRES model, coined a name UNRES server, is presented. In contrast to most of the protein coarse-grained models, owing to its physics-based origin, the UNRES force field can be used in simulations, including those aimed at protein-structure prediction, without ancillary information from structural databases; however, the implementation includes the possibility of using restraints. Local energy minimization, canonical molecular dynamics simulations, replica exchange and multiplexed replica exchange molecular dynamics simulations can be run with the current UNRES server; the latter are suitable for protein-structure prediction. The user-supplied input includes protein sequence and, optionally, restraints from secondary-structure prediction or small x-ray scattering data, and simulation type and parameters which are selected or typed in. Oligomeric proteins, as well as those containing D-amino-acid residues and disulfide links can be treated. The output is displayed graphically (minimized structures, trajectories, final models, analysis of trajectory/ensembles); however, all output files can be downloaded by the user. The UNRES server can be freely accessed at http://unres-server.chem.ug.edu.pl.

Assessment of chemical-crosslink-assisted protein structure modeling in CASP13.

With the advance of experimental procedures obtaining chemical crosslinking information is becoming a fast and routine practice. Information on crosslinks can greatly enhance the accuracy of protein structure modeling. Here, we review the current state of the art in modeling protein structures with the assistance of experimentally determined chemical crosslinks within the framework of the 13th meeting of Critical Assessment of Structure Prediction approaches. This largest-to-date blind assessment reveals benefits of using data assistance in difficult to model protein structure prediction cases. However, in a broader context, it also suggests that with the unprecedented advance in accuracy to predict contacts in recent years, experimental crosslinks will be useful only if their specificity and accuracy further improved and they are better integrated into computational workflows.

Blind prediction of homo- and hetero-protein complexes: The CASP13-CAPRI experiment.

We present the results for CAPRI Round 46, the third joint CASP-CAPRI protein assembly prediction challenge. The Round comprised a total of 20 targets including 14 homo-oligomers and 6 heterocomplexes. Eight of the homo-oligomer targets and one heterodimer comprised proteins that could be readily modeled using templates from the Protein Data Bank, often available for the full assembly. The remaining 11 targets comprised 5 homodimers, 3 heterodimers, and two higher-order assemblies. These were more difficult to model, as their prediction mainly involved "ab-initio" docking of subunit models derived from distantly related templates. A total of ~30 CAPRI groups, including 9 automatic servers, submitted on average ~2000 models per target. About 17 groups participated in the CAPRI scoring rounds, offered for most targets, submitting ~170 models per target. The prediction performance, measured by the fraction of models of acceptable quality or higher submitted across all predictors groups, was very good to excellent for the nine easy targets. Poorer performance was achieved by predictors for the 11 difficult targets, with medium and high quality models submitted for only 3 of these targets. A similar performance "gap" was displayed by scorer groups, highlighting yet again the unmet challenge of modeling the conformational changes of the protein components that occur upon binding or that must be accounted for in template-based modeling. Our analysis also indicates that residues in binding interfaces were less well predicted in this set of targets than in previous Rounds, providing useful insights for directions of future improvements.

A general method for the derivation of the functional forms of the effective energy terms in coarse-grained energy functions of polymers. III. Determination of scale-consistent backbone-local and correlation potentials in the UNRES force field and force-field calibration and validation.

The general theory of the construction of scale-consistent energy terms in the coarse-grained force fields presented in Paper I of this series has been applied to the revision of the UNRES force field for physics-based simulations of proteins. The potentials of mean force corresponding to backbone-local and backbone-correlation energy terms were calculated from the ab initio energy surfaces of terminally blocked glycine, alanine, and proline, and the respective analytical expressions, derived by using the scale-consistent formalism, were fitted to them. The parameters of all these potentials depend on single-residue types, thus reducing their number and preventing over-fitting. The UNRES force field with the revised backbone-local and backbone-correlation terms was calibrated with a set of four small proteins with basic folds: tryptophan cage variant (TRP1; α), Full Sequence Design (FSD; α + ß), villin headpiece (villin; α), and a truncated FBP-28 WW-domain variant (2MWD; ß) (the NEWCT-4P force field) and, subsequently, with an enhanced set of 9 proteins composed of TRP1, FSD, villin, 1BDC (α), 2I18 (α), 1QHK (α + ß), 2N9L (α + ß), 1E0L (ß), and 2LX7 (ß) (the NEWCT-9P force field). The NEWCT-9P force field performed better than NEWCT-4P in a blind-prediction-like test with a set of 26 proteins not used in calibration and outperformed, in a test with 76 proteins, the most advanced OPT-WTFSA-2 version of UNRES with former backbone-local and backbone-correlation terms that contained more energy terms and more optimizable parameters. The NEWCT-9P force field reproduced the bimodal distribution of backbone-virtual-bond angles in the simulated structures, as observed in experimental protein structures.

Processing and Maturation of Cathepsin C Zymogen: A Biochemical and Molecular Modeling Analysis.

Cysteine cathepsin C (CatC) is a ubiquitously expressed, lysosomal aminopeptidase involved in the activation of zymogens of immune-cell-associated serine proteinases (elastase, cathepsin G, proteinase 3, neutrophil serine proteinase 4, lymphocyte granzymes, and mast cell chymases). CatC is first synthetized as an inactive zymogen containing an intramolecular chain propeptide, the dimeric form of which is processed into the mature tetrameric form by proteolytic cleavages. A molecular modeling analysis of proCatC indicated that its propeptide displayed a similar fold to those of other lysosomal cysteine cathepsins, and could be involved in dimer formation. Our in vitro experiments revealed that human proCatC was processed and activated by CatF, CatK, and CatV in two consecutive steps of maturation, as reported for CatL and CatS previously. The unique positioning of the propeptide domains in the proCatC dimer complex allows this order of cleavages to be understood. The missense mutation Leu172Pro within the propeptide region associated with the Papillon-Lefèvre and Haim-Munk syndrome altered the proform stability as well as the maturation of the recombinant Leu172Pro proform.

Prediction of protein structure with the coarse-grained UNRES force field assisted by small X-ray scattering data and knowledge-based information.

A new approach to assisted protein-structure prediction has been proposed, which is based on running multiplexed replica exchange molecular dynamics simulations with the coarse-grained UNRES force field with restraints derived from knowledge-based models and distance distribution from small angle X-ray scattering (SAXS) measurements. The latter restraints are incorporated into the target function as a maximum-likelihood term that guides the shape of the simulated structures towards that defined by SAXS. The approach was first verified with the 1KOY protein, for which the distance distribution was calculated from the experimental structure, and subsequently used to predict the structures of 11 data-assisted targets in the CASP12 experiment. Major improvement of the GDT_TS was obtained for 2 targets, minor improvement for other 2 while, for 6 target GDT_TS deteriorated compared with that calculated for predictions without the SAXS data, partly because of assuming a wrong multimeric state (for Ts866) or because the crystal conformation was more compact than the solution conformation (for Ts942). Particularly good results were obtained for Ts909, in which use of SAXS data resulted in the selection of a correctly packed trimer and, subsequently, increased the GDT_TS of monomer prediction. It was found that running simulations with correct oligomeric state is essential for the success in SAXS-data-assisted prediction.

Ergodicity and model quality in template-restrained canonical and temperature/Hamiltonian replica exchange coarse-grained molecular dynamics simulations of proteins.

Molecular simulations restrained to single or multiple templates are commonly used in protein-structure modeling. However, the restraints introduce additional barriers, thus impairing the ergodicity of simulations, which can affect the quality of the resulting models. In this work, the effect of restraint types and simulation schemes on ergodicity and model quality was investigated by performing template-restrained canonical molecular dynamics (MD), multiplexed replica-exchange molecular dynamics, and Hamiltonian replica exchange molecular dynamics (HREMD) simulations with the coarse-grained UNRES force field on nine selected proteins, with pseudo-harmonic log-Gaussian (unbounded) or Lorentzian (bounded) restraint functions. The best ergodicity was exhibited by HREMD. It has been found that non-ergodicity does not affect model quality if good templates are used to generate restraints. However, when poor-quality restraints not covering the entire protein are used, the improved ergodicity of HREMD can lead to significantly improved protein models. © 2017 Wiley Periodicals, Inc.

Performance of protein-structure predictions with the physics-based UNRES force field in CASP11.

Participating as the Cornell-Gdansk group, we have used our physics-based coarse-grained UNited RESidue (UNRES) force field to predict protein structure in the 11th Community Wide Experiment on the Critical Assessment of Techniques for Protein Structure Prediction (CASP11). Our methodology involved extensive multiplexed replica exchange simulations of the target proteins with a recently improved UNRES force field to provide better reproductions of the local structures of polypeptide chains. All simulations were started from fully extended polypeptide chains, and no external information was included in the simulation process except for weak restraints on secondary structure to enable us to finish each prediction within the allowed 3-week time window. Because of simplified UNRES representation of polypeptide chains, use of enhanced sampling methods, code optimization and parallelization and sufficient computational resources, we were able to treat, for the first time, all 55 human prediction targets with sizes from 44 to 595 amino acid residues, the average size being 251 residues. Complete structures of six single-domain proteins were predicted accurately, with the highest accuracy being attained for the T0769, for which the CαRMSD was 3.8 Å for 97 residues of the experimental structure. Correct structures were also predicted for 13 domains of multi-domain proteins with accuracy comparable to that of the best template-based modeling methods. With further improvements of the UNRES force field that are now underway, our physics-based coarse-grained approach to protein-structure prediction will eventually reach global prediction capacity and, consequently, reliability in simulating protein structure and dynamics that are important in biochemical processes. AVAILABILITY AND IMPLEMENTATION: Freely available on the web at http://www.unres.pl/ CONTACT: has5@cornell.edu.

Folding kinetics of WW domains with the united residue force field for bridging microscopic motions and experimental measurements.

To demonstrate the utility of the coarse-grained united-residue (UNRES) force field to compare experimental and computed kinetic data for folding proteins, we have performed long-time millisecond-timescale canonical Langevin molecular dynamics simulations of the triple ß-strand from the Formin binding protein 28 WW domain and six nonnatural variants, using UNRES. The results have been compared with available experimental data in both a qualitative and a quantitative manner. Complexities of the folding pathways, which cannot be determined experimentally, were revealed. The folding mechanisms obtained from the simulated folding kinetics are in agreement with experimental results, with a few discrepancies for which we have accounted. The origins of single- and double-exponential kinetics and their correlations with two- and three-state folding scenarios are shown to be related to the relative barrier heights between the various states. The rate constants obtained from time profiles of the fractions of the native, intermediate, and unfolded structures, and the kinetic equations fitted to them, correlate with the experimental values; however, they are about three orders of magnitude larger than the experimental ones for most of the systems. These differences are in agreement with the timescale extension derived by scaling down the friction of water and averaging out the fast degrees of freedom when passing from all-atom to a coarse-grained representation. Our results indicate that the UNRES force field can provide accurate predictions of folding kinetics of these WW domains, often used as models for the study of the mechanisms of proein folding.

Photophysical properties of symmetrically substituted diarylacetylenes and diarylbuta-1,3-diynes.

A series of symmetrically substituted diarylacetylenes and diaryl-1,3-butadiynes were prepared and studied with an emphasis on their spectral and photophysical properties. The photophysical characteristics of these compounds were studied in relation to their structures and the influence of solvent or temperature. The observed spectral and photophysical properties are explained using potential energy maps of the ground and excited states obtained from density functional theory calculations. The structure-property relationships of all of the compounds are discussed and compared with the appropriate diphenylacetylene and diphenyl-1,3-butadiyne derivatives.