RESUMEN
Tackling issues of implantation-caused defects and contamination, this paper presents a new complementary metal-oxide-semiconductor (CMOS) image sensor (CIS) pixel design concept based on a native epitaxial layer for photon detection, charge storage, and charge transfer to the sensing node. To prove this concept, a backside illumination (BSI), p-type, 2-µm-pitch pixel was designed. It integrates a vertical pinned photo gate (PPG), a buried vertical transfer gate (TG), sidewall capacitive deep trench isolation (CDTI), and backside oxide-nitride-oxide (ONO) stack. The designed pixel was fabricated with variations of key parameters for optimization. Testing results showed the following achievements: 13,000 h+ full-well capacity with no lag for charge transfer, 80% quantum efficiency (QE) at 550-nm wavelength, 5 h+/s dark current at 60 °C, 2 h+ temporal noise floor, and 75 dB dynamic range. In comparison with conventional pixel design, the proposed concept could improve CIS performance.