Re-evaluating the need for chronic toxicity studies with therapeutic monoclonal antibodies, using a weight of evidence approach.

To support registration of monoclonal antibodies (mAbs) for chronic indications, 6-month toxicity studies have historically been conducted. Experience with mAb development has shown a relatively benign and well-understood safety profile for this class, with most toxicity findings anticipated based on pharmacology. We evaluated whether a 6-month toxicity study is necessary to assess the long-term safety of mAbs. Data on First-in-Human (FIH)-enabling and chronic toxicity studies were shared for 142 mAbs submitted by 11 companies. Opportunities to further optimize study designs to reduce animal usage were identified. For 71% of mAbs, no toxicities or no new toxicities were noted in chronic studies compared to FIH-enabling study findings. New toxicities of potential concern for human safety or that changed trial design were identified in 13.5% of cases, with 7% being considered critical and 2% leading to program termination. An iterative, weight-of-evidence model which considers factors that influence the overall risk for a mAb to cause toxicity was developed. This model enables an evidence-based justification, suggesting when 3-month toxicity studies are likely sufficient to support late-stage clinical development and registration for some mAbs.

The use of recovery animals in nonclinical safety assessment studies with monoclonal antibodies: further 3Rs opportunities remain.

Assessment of reversibility from nonclinical toxicity findings in animals with potential adverse clinical impact is required during pharmaceutical development, but there is flexibility around how and when this is performed and if recovery animals are necessary. For monoclonal antibodies (mAbs) and in accordance with ICH S6(R1) if inclusion of recovery animals is warranted, this need only occur in one study. Data on study designs for first-in-human (FIH)-enabling and later-development toxicity studies were shared from a recent collaboration between the NC3Rs, EPAA, Netherlands Medicines Evaluation Board (MEB) and 14 pharmaceutical companies. This enabled a review of practices on recovery animal use during mAb development and identification of opportunities to reduce research animal use. Recovery animals were included in 68% of FIH-enabling and 69% of later-development studies, often in multiple studies in the same program. Recovery groups were commonly in control plus one test article-dosed group or in all dose groups (45% of studies, each design). Based on the shared data review and conclusions, limiting inclusion of recovery to a single nonclinical toxicology study and species, study design optimisation and use of existing knowledge instead of additional recovery groups provide opportunities to further reduce animal use within mAb development programs.

Harmonized 3Rs-based non-mutagenic impurity qualification study designs developed using the results of an IQ consortium survey.

As per the ICH Q3A(R2) and Q3B(R2) regulatory guidelines, safety studies may be needed when an impurity in new drug substances or products is above the qualification threshold, and such qualification studies should be conducted in one nonclinical species for a duration of 14-90 days. However, the guidelines do not specify details about species selection, recommended study design, and the exact study duration that would support clinical use of a specific duration. This lack of guidance leads to ambiguity and sponsors have used various study designs to qualify impurities. In 2018, the European Medicines Agency provided a draft reflection paper encouraging the incorporation of 3Rs (Replacement, Reduction, and Refinement) principles for animal use into impurity qualification. As a response, the IQ DruSafe Impurity Working Group (WG) surveyed the IQ member companies to capture the current practices for impurity qualification, and evaluate study designs for a potential reduction in animal testing. This article summarizes the results and learnings from the survey. Additionally, the WG leveraged the survey learnings and provided harmonized study design considerations aimed towards achieving the study objectives, while supporting the 3Rs initiative in reducing the total number of animals used (up to 90%) for impurity qualification.

Computational requirements for real-time ptychographic image reconstruction.

Ptychographic imaging techniques can be coupled with tomographic image reconstruction techniques to obtain cross-sectional 3D images with resolution on the nanometer scale. However, such ptychographic x-ray computed tomography (PXCT) techniques require the collection of a large number of diffraction patterns. This work derives a set of equations that can be used to calculate the rate at which data can be collected given an experimental setup. It also determines the computational system requirements needed to process ptychographic data in real time as soon as it has been collected. This will expedite the ptychography step of PXCT. These theoretical results are then applied to performance data collected from reconstructing simulated diffraction patterns in order to determine the computational resources needed for real-time ptychographic processing for representative experimental setups. All of our results are independent of any specific ptychographic reconstruction algorithm.

Beyond MABEL: An Integrative Approach to First in Human Dose Selection of Immunomodulators by the Health and Environmental Sciences Institute (HESI) Immuno-Safety Technical Committee (ITC).

Administration of a new drug candidate in a first-in-human (FIH) clinical trial is a particularly challenging phase in drug development and is especially true for immunomodulators, which are a diverse and complex class of drugs with a broad range of mechanisms of action and associated safety risks. Risk is generally greater for immunostimulators, in which safety concerns are associated with acute toxicity, compared to immunosuppressors, where the risks are related to chronic effects. Current methodologies for FIH dose selection for immunostimulators are focused primarily on identifying the minimum anticipated biological effect level (MABEL), which has often resulted in sub-therapeutic doses, leading to long and costly escalation phases. The Health and Environmental Sciences Institute (HESI) - Immuno-Safety Technical Committee (ITC) organized a project to address this issue through two complementary approaches: (i) an industry survey on FIH dose selection strategies and (ii) detailed case studies for immunomodulators in oncology and non-oncology indications. Key messages from the industry survey responses highlighted a preference toward more dynamic PK/PD approaches as in vitro assays are seemingly not representative of true physiological conditions for immunomodulators. These principles are highlighted in case studies. To address the above themes, we have proposed a revised decision tree, which expands on the guidance by the IQ MABEL Working Group (Leach et al. 2021). This approach facilitates a more refined recommendation of FIH dose selection for immunomodulators, allowing for a nuanced consideration of their mechanisms of action (MOAs) and the associated risk-to-benefit ratio, among other factors.

Potent, selective spiropyrrolidine pyrimidinetrione inhibitors of MMP-13.

Explorations in the pyrimidinetrione series of MMP-13 inhibitors led to the discovery of a series of spiro-fused compounds that are potent and selective inhibitors of MMP-13. While other spiro-fused motifs are hydrolytically unstable, presumably due to electronic destabilization of the pyrimidinetrione ring, the spiropyrrolidine series does not share this liability. Greater than 100-fold selectivity versus other MMP family members was achieved by incorporation of an extended aryl-heteroaryl P1'group. When dosed as the sodium salt, these compounds displayed excellent oral absorption and pharmacokinetic properties. Despite the selectivity, a representative of this series produced fibroplasia in a 14 day rat study.

Importance of investigating epigenetic alterations for industry and regulators: An appraisal of current efforts by the Health and Environmental Sciences Institute.

Recent technological advances have led to rapid progress in the characterization of epigenetic modifications that control gene expression in a generally heritable way, and are likely involved in defining cellular phenotypes, developmental stages and disease status from one generation to the next. On November 18, 2013, the International Life Sciences Institute (ILSI) Health and Environmental Sciences Institute (HESI) held a symposium entitled "Advances in Assessing Adverse Epigenetic Effects of Drugs and Chemicals" in Washington, D.C. The goal of the symposium was to identify gaps in knowledge and highlight promising areas of progress that represent opportunities to utilize epigenomic profiling for risk assessment of drugs and chemicals. Epigenomic profiling has the potential to provide mechanistic information in toxicological safety assessments; this is especially relevant for the evaluation of carcinogenic or teratogenic potential and also for drugs that directly target epigenetic modifiers, like DNA methyltransferases or histone modifying enzymes. Furthermore, it can serve as an endpoint or marker for hazard characterization in chemical safety assessment. The assessment of epigenetic effects may also be approached with new model systems that could directly assess transgenerational effects or potentially sensitive stem cell populations. These would enhance the range of safety assessment tools for evaluating xenobiotics that perturb the epigenome. Here we provide a brief synopsis of the symposium, update findings since that time and then highlight potential directions for future collaborative efforts to incorporate epigenetic profiling into risk assessment.

Rational design of a topical androgen receptor antagonist for the suppression of sebum production with properties suitable for follicular delivery.

A novel nonsteroidal androgen receptor antagonist, (R)-4-(1-benzyl-4,4-dimethyl-2-oxopyrrolidin-3-yloxy)-2-(trifluoromethyl)benzonitrile (1), for the topical control of sebum production is reported. This compound, which is potent, selective, and efficacious in the clinically validated golden Syrian hamster ear animal model, was designed to be delivered to the pilosebaceous unit, the site of action, preferentially by the follicular route.

Metabonomic evaluation of metabolic dysregulation in rats induced by PF 376304, a novel inhibitor of phosphoinositide 3-kinase.

Phosphoinositide 3-kinase (PI3K) is an enzyme fundamental to the regulation of various metabolic processes. Metabonomic studies were undertaken in order to gain mechanistic insight into significant, yet unexplained, toxicity issues associated with PF 376304, a nonspecific PI3K inhibitor under development for anti-inflammatory indications. Two experiments were conducted in which rats were given daily doses of up to 1000 mg of PF 376304/kg for as long as 7 days. Mortality rapidly ensued (within 72 h) at doses of >or=300 mg/kg. Doses of >or=100 mg/kg were associated with a profound but transient glucosuria. Despite the magnitude of this effect, within 72 h urinary glucose excretion in surviving animals returned to control levels even with continued dosing. Other metabolic effects associated with drug treatment included increased urinary beta-hydroxybutyrate and creatine and decreased citrate. A time-course study revealed elevated serum glucose within 1 h, followed by increases in serum insulin and decreases in serum triglycerides. Serum corticosterone was also significantly elevated within 1 h of treatment. All metabolic effects were largely reversed within 24 h of administration of the third daily dose and remained that way through day 7. The likely explanation for the onset of effects involves the role of PI3K in regulation of glucose at multiple points, but the reversal of the effects in the presence of continued exposure to the drug has not been explained. Finally, the data demonstrate the power of metabonomics technology in mechanistic toxicology investigations.

Discovery and characterization of a novel inhibitor of matrix metalloprotease-13 that reduces cartilage damage in vivo without joint fibroplasia side effects.

Matrix metalloproteinase-13 (MMP13) is a Zn(2+)-dependent protease that catalyzes the cleavage of type II collagen, the main structural protein in articular cartilage. Excess MMP13 activity causes cartilage degradation in osteoarthritis, making this protease an attractive therapeutic target. However, clinically tested MMP inhibitors have been associated with a painful, joint-stiffening musculoskeletal side effect that may be due to their lack of selectivity. In our efforts to develop a disease-modifying osteoarthritis drug, we have discovered MMP13 inhibitors that differ greatly from previous MMP inhibitors; they do not bind to the catalytic zinc ion, they are noncompetitive with respect to substrate binding, and they show extreme selectivity for inhibiting MMP13. By structure-based drug design, we generated an orally active MMP13 inhibitor that effectively reduces cartilage damage in vivo and does not induce joint fibroplasias in a rat model of musculoskeletal syndrome side effects. Thus, highly selective inhibition of MMP13 in patients may overcome the major safety and efficacy challenges that have limited previously tested non-selective MMP inhibitors. MMP13 inhibitors such as the ones described here will help further define the role of this protease in arthritis and other diseases and may soon lead to drugs that safely halt cartilage damage in patients.

Potent, selective pyrimidinetrione-based inhibitors of MMP-13.

Using SAR from two related series of pyrimidinetrione-based inhibitors, compounds with potent MMP-13 inhibition and >100-fold selectivity against other MMPs have been identified. Despite high molecular weights, clogPs, and polar surface areas, the compounds are generally well absorbed and have excellent pharmacokinetic (PK) properties when dosed as sodium salts. In a rat fibrosis model, a compound from the series displayed no fibrosis at exposures many fold greater than its MMP-13 IC50.

Inhibition of cell proliferation and AP-1 activity by acrolein in human A549 lung adenocarcinoma cells due to thiol imbalance and covalent modifications.

Acrolein, a reactive alpha,beta-unsaturated aldehyde, is a common environmental pollutant, a metabolite of the anticancer drug cyclophosphamide, and a byproduct of lipid peroxidation. An increase in acrolein production has been proposed as a marker for Alzheimer's disease, diabetic glomerular lesions, and atherosclerosis. Acrolein is a potent inhibitor of cell proliferation at nonlethal doses and may act through effects on redox-regulated transcription factors. We previously reported that NF-kappaB activation is inhibited by acrolein in the A549 lung adenocarcinoma cell line in an IkappaB-independent manner [Horton et al. (1999) J. Biol. Chem. 274, 9200-9206]. The current data demonstrate that AP-1 activation in A549 cells is decreased by 26 and 50% at 0.5 and 1 h, respectively, after exposure to 50 fmol/cell (a nonlethal dose) of acrolein. Inhibition of AP-1 activation also occurred following treatment with buthionine sulfoximine to deplete glutathione to the same extent as seen with acrolein. c-jun antisense treatments depressed c-jun protein below detectable levels at 4 h and inhibited cell proliferation (as assessed by [(3)H]thymidine incorporation) by 80%. Immunoprecipitation of c-jun protein after treating A549 cells with acrolein revealed the presence of a lysine-acrolein adduct. There was, however, no effect of acrolein on c-jun N-terminal kinase activity or c-jun phosphorylation. These data indicate that the inhibition of cell proliferation induced by acrolein correlates with the depletion of glutathione as well as the inhibition of AP-1 activation. AP-1 activation is likely affected both through changes in cellular thiol redox balance and by covalent modification of acrolein to c-jun, but not through effects on c-jun phosphorylation.