Tripled yield in direct-drive laser fusion through statistical modelling.

Focusing laser light onto a very small target can produce the conditions for laboratory-scale nuclear fusion of hydrogen isotopes. The lack of accurate predictive models, which are essential for the design of high-performance laser-fusion experiments, is a major obstacle to achieving thermonuclear ignition. Here we report a statistical approach that was used to design and quantitatively predict the results of implosions of solid deuterium-tritium targets carried out with the 30-kilojoule OMEGA laser system, leading to tripling of the fusion yield to its highest value so far for direct-drive laser fusion. When scaled to the laser energies of the National Ignition Facility (1.9 megajoules), these targets are predicted to produce a fusion energy output of about 500 kilojoules-several times larger than the fusion yields currently achieved at that facility. This approach could guide the exploration of the vast parameter space of thermonuclear ignition conditions and enhance our understanding of laser-fusion physics.

Effect of Strongly Magnetized Electrons and Ions on Heat Flow and Symmetry of Inertial Fusion Implosions.

This Letter presents the first observation on how a strong, 500 kG, externally applied B field increases the mode-two asymmetry in shock-heated inertial fusion implosions. Using a direct-drive implosion with polar illumination and imposed field, we observed that magnetization produces a significant increase in the implosion oblateness (a 2.5× larger P2 amplitude in x-ray self-emission images) compared with reference experiments with identical drive but with no field applied. The implosions produce strongly magnetized electrons (ω_{e}τ_{e}≫1) and ions (ω_{i}τ_{i}>1) that, as shown using simulations, restrict the cross field heat flow necessary for lateral distribution of the laser and shock heating from the implosion pole to the waist, causing the enhanced mode-two shape.

Fast electron transport dynamics and energy deposition in magnetized, imploded cylindrical plasma.

Inertial confinement fusion approaches involve the creation of high-energy-density states through compression. High gain scenarios may be enabled by the beneficial heating from fast electrons produced with an intense laser and by energy containment with a high-strength magnetic field. Here, we report experimental measurements from a configuration integrating a magnetized, imploded cylindrical plasma and intense laser-driven electrons as well as multi-stage simulations that show fast electrons transport pathways at different times during the implosion and quantify their energy deposition contribution. The experiment consisted of a CH foam cylinder, inside an external coaxial magnetic field of 5 T, that was imploded using 36 OMEGA laser beams. Two-dimensional (2D) hydrodynamic modelling predicts the CH density reaches [Formula: see text], the temperature reaches 920 eV and the external B-field is amplified at maximum compression to 580 T. At pre-determined times during the compression, the intense OMEGA EP laser irradiated one end of the cylinder to accelerate relativistic electrons into the dense imploded plasma providing additional heating. The relativistic electron beam generation was simulated using a 2D particle-in-cell (PIC) code. Finally, three-dimensional hybrid-PIC simulations calculated the electron propagation and energy deposition inside the target and revealed the roles the compressed and self-generated B-fields play in transport. During a time window before the maximum compression time, the self-generated B-field on the compression front confines the injected electrons inside the target, increasing the temperature through Joule heating. For a stronger B-field seed of 20 T, the electrons are predicted to be guided into the compressed target and provide additional collisional heating. This article is part of a discussion meeting issue 'Prospects for high gain inertial fusion energy (part 2)'.

Development and external validation study of a melanoma risk prediction model incorporating clinically assessed naevi and solar lentigines.

BACKGROUND: Melanoma risk prediction models could be useful for matching preventive interventions to patients' risk. OBJECTIVES: To develop and validate a model for incident first-primary cutaneous melanoma using clinically assessed risk factors. METHODS: We used unconditional logistic regression with backward selection from the Australian Melanoma Family Study (461 cases and 329 controls) in which age, sex and city of recruitment were kept in each step, and we externally validated it using the Leeds Melanoma Case-Control Study (960 cases and 513 controls). Candidate predictors included clinically assessed whole-body naevi and solar lentigines, and self-assessed pigmentation phenotype, sun exposure, family history and history of keratinocyte cancer. We evaluated the predictive strength and discrimination of the model risk factors using odds per age- and sex-adjusted SD (OPERA) and the area under curve (AUC), and calibration using the Hosmer-Lemeshow test. RESULTS: The final model included the number of naevi ≥ 2 mm in diameter on the whole body, solar lentigines on the upper back (a six-level scale), hair colour at age 18 years and personal history of keratinocyte cancer. Naevi was the strongest risk factor; the OPERA was 3·51 [95% confidence interval (CI) 2·71-4·54] in the Australian study and 2·56 (95% CI 2·23-2·95) in the Leeds study. The AUC was 0·79 (95% CI 0·76-0·83) in the Australian study and 0·73 (95% CI 0·70-0·75) in the Leeds study. The Hosmer-Lemeshow test P-value was 0·30 in the Australian study and < 0·001 in the Leeds study. CONCLUSIONS: This model had good discrimination and could be used by clinicians to stratify patients by melanoma risk for the targeting of preventive interventions. What's already known about this topic? Melanoma risk prediction models may be useful in prevention by tailoring interventions to personalized risk levels. For reasons of feasibility, time and cost many melanoma prediction models use self-assessed risk factors. However, individuals tend to underestimate their naevus numbers. What does this study add? We present a melanoma risk prediction model, which includes clinically-assessed whole-body naevi and solar lentigines, and self-assessed risk factors including pigmentation phenotype and history of keratinocyte cancer. This model performs well on discrimination, the model's ability to distinguish between individuals with and without melanoma, and may assist clinicians to stratify patients by melanoma risk for targeted preventive interventions.

Systematic review and meta-analysis of the anatomical variants of the left colic artery.

AIM: To provide a comprehensive evidence-based assessment of the anatomical variations of the left colic artery (LCA). METHOD: A thorough systematic search of the literature up until 1 April 2019 was conducted on the electronic databases PubMed, SCOPUS and Web of Science (WOS) to identify studies eligible for inclusion. Data were extracted and pooled into a meta-analysis using the Metafor package in R. The primary outcomes of interest were the absence of the LCA and the anatomical variants of its origin. The secondary outcomes were the distance (mean ± SD) between the origin of the inferior mesenteric artery (OIMA) and the origin of the left colic artery (OLCA). RESULTS: A total of 19 studies (n = 2040 patients) were included. The pooled prevalence estimate (PPE) of LCA absence was 1.2% (95% CI 0.0-3.6%). Across participants with either a Type I or Type II LCA, the PPE of a Type I LCA was 49.0% (95% CI 40.2-57.8%). The PPE of a Type II LCA was therefore 51.0%. The pooled mean distance from the OIMA to the OLCA was 40.41 mm (95 CI% 38.69-42.12 mm). The pooled mean length of a Type I LCA was 39.12 mm (95% CI 36.70-41.53 mm) while the pooled mean length of a Type IIa and Type IIb LCA was 41.43 mm (95% CI 36.90-43.27 mm) and 39.64 mm (95% CI 37.68-41.59 mm), respectively. CONCLUSION: Although the absence of the LCA is a rare occurrence (PPE 1.2%), it may be associated with an important risk of anastomotic leakage as a result of insufficient vascularization of the proximal colonic conduit. It is also necessary to distinguish variants I and II of Latarjet, the frequency of which is identical, with division of the LCA being technically more straightforward in variant I of Latarjet. Surgeons should be aware that technical difficulties are likely to be more common with variant II of Latarjet, as LCA ligation may be more difficult due to its close proximity to the inferior mesenteric vein (IMV).

Acid tolerance properties of dental biofilms in vivo.

BACKGROUND: The ecological plaque hypothesis explains caries development as the result of the enrichment of acid tolerant bacteria in dental biofilms in response to prolonged periods of low pH. Acid production by an acid tolerant microflora causes demineralisation of tooth enamel and thus, individuals with a greater proportion of acid tolerant bacteria would be expected to be more prone to caries development. Biofilm acid tolerance could therefore be a possible biomarker for caries prediction. However, little is known about the stability of biofilm acid tolerance over time in vivo or the distribution throughout the oral cavity. Therefore the aim of this study was to assess intra-individual differences in biofilm acid-tolerance between different tooth surfaces and inter-individual variation as well as stability of acid tolerance over time. RESULTS: The majority of the adolescents showed low scores for biofilm acid tolerance. In 14 of 20 individuals no differences were seen between the three tooth sites examined. In the remaining six, acid-tolerance at the premolar site differed from one of the other sites. At 51 of 60 tooth sites, acid-tolerance at baseline was unchanged after 1 month. However, acid tolerance values changed over a 1-year period in 50% of the individuals. CONCLUSIONS: Biofilm acid tolerance showed short-term stability and low variation between different sites in the same individual suggesting that the acid tolerance could be a promising biological biomarker candidate for caries prediction. Further evaluation is however needed and prospective clinical trials are called for to evaluate the diagnostic accuracy.

The Graduating European Dentist-Domain I: Professionalism.

This position paper outlines the areas of competence and learning outcomes of "The Graduating European Dentist" that specifically relate to Professionalism. Professionalism is a commitment to a set of values, behaviours and relationships, which underpin the trust that the public hold in dental care professionals. Shortcomings within this domain are often responsible for patient dissatisfaction, concern and complaint-and emphasis is placed on the importance of embedding these values from an early stage within the curriculum.

The Graduating European Dentist-Domain III: Patient-Centred Care.

This position paper outlines the areas of competence and learning outcomes of "The Graduating European Dentist" that specifically relate to patient-centred care. This approach is becoming increasingly prominent within the literature and within policy documents. Whilst working to an evidence base is critical, dentists must also be aware of the scientific basis that underpins the treatment they provide. The evaluation process, which supports treatment planning, also requires dentists to be able to listen, collate, and record pertinent information effectively. In addition, the ability to account for a patient's social, cultural and linguistic needs (cultural competence) will result in a practitioner who is able to treatment plan for patient-centred care.

The Graduating European Dentist: Contemporaneous Methods of Teaching, Learning and Assessment in Dental Undergraduate Education.

It is often the case that good teachers just "intuitively" know how to teach. Whilst that may be true, there is now a greater need to understand the various processes that underpin both the ways in which a curriculum is delivered, and the way in which the students engage with learning; curricula need to be designed to meet the changing needs of our new graduates, providing new, and robust learning opportunities, and be communicated effectively to both staff and students. The aim of this document is to draw together robust and contemporaneous methods of teaching, learning and assessment that help to overcome some of the more traditional barriers within dental undergraduate programmes. The methods have been chosen to map specifically to The Graduating European Dentist, and should be considered in parallel with the benchmarking process that educators and institutions employ locally.

Vitamin D, vitamin A, the primary melanoma transcriptome and survival.

Survival from melanoma is influenced by several, well-established clinical and histopathological factors, e.g. age, Breslow thickness and microscopic ulceration. We (the Section of Epidemiology and Biostatistics, University of Leeds) have carried out research to better understand the biological basis for these observations. Preliminary results indicated a protective role for vitamin D in melanoma relapse and that higher vitamin D was associated with thinner primary melanomas. Funding from the British Skin Foundation enabled JNB to establish a study of the effects of vitamin A in melanoma. The results suggested that vitamin A could reduce the protective effect of vitamin D in terms of overall survival. Therefore, we propose that vitamin D3 supplementation alone might be preferable to combined multivitamin preparations, where vitamin D supplementation is deemed to be appropriate. Proving a causal link between vitamin D and melanoma-specific survival is challenging. We have shown limited evidence of causation in a Mendelian randomization experiment (described in more detail later). Recent work in Leeds has also shown that higher vitamin D may be protective for microscopic ulceration. Taken together, vitamin D appears to be associated with less aggressive primary melanomas and may itself influence outcome. We continue to explore the role of vitamin D in melanoma survival and the optimum levels that might be crucial.

Enhanced relativistic-electron-beam energy loss in warm dense aluminum.

Energy loss in the transport of a beam of relativistic electrons in warm dense aluminum is measured in the regime of ultrahigh electron beam current density over 2×10^{11} A/cm^{2} (time averaged). The samples are heated by shock compression. Comparing to undriven cold solid targets, the roles of the different initial resistivity and of the transient resistivity (upon target heating during electron transport) are directly observable in the experimental data, and are reproduced by a comprehensive set of simulations describing the hydrodynamics of the shock compression and electron beam generation and transport. We measured a 19% increase in electron resistive energy loss in warm dense compared to cold solid samples of identical areal mass.

Strains of Enterococcus faecalis differ in their ability to coexist in biofilms with other root canal bacteria.

AIM: To investigate the relationship between protease production and the ability of Enterococcus faecalis strains to coexist in biofilms with other bacteria commonly recovered from infected root canals. METHODOLOGY: Biofilms with bacteria in mono-, dual- and four-species communities were developed in flow chambers. The organisms used were Lactobacillus salivarius, Streptococcus gordonii and Actinomyces naeslundii and E. faecalis strains, GUL1 and OG1RF. Biovolume and species distribution were examined using 16S rRNA fluorescence in situ hybridization in combination with confocal microscopy and image analysis. The full proteome of the E. faecalis strains was studied using two-dimensional gel electrophoresis. Spots of interest were identified using tandem mass spectroscopy and quantified using Delta 2D software. RESULTS: All bacteria formed biofilms and an anova analysis revealed that the biofilm biomass increased significantly (P ≤ 0.01) between 6 and 24 h. L. salivarius, S. gordonii and A. naeslundii formed mutualistic biofilm communities, and this pattern was unchanged when E. faecalis GUL1 was included in the consortium. However, with OG1RF, L. salivarius and S. gordonii were outcompeted in a 24-h biofilm. Proteomic analysis revealed that OG1RF secreted higher levels of proteases, GelE (P = 0.02) and SprE (P = 0.002) and a previously unidentified serine protease (P = 0.05), than GUL1. CONCLUSIONS: Different strains of E. faecalis can interact synergistically or antagonistically with a consortium of root canal bacteria. A possible mechanism underlying this, as well as potential differences in virulence, is production of different levels of proteases, which can cause detachment of neighbouring bacteria and tissue damage.

Bacterial profiles and proteolytic activity in peri-implantitis versus healthy sites.

Peri-implantitis is a biofilm-induced destructive inflammatory process that, over time, results in loss of supporting bone around an osseointegrated dental implant. Biofilms at peri-implantitis sites have been reported to be dominated by Gram-negative anaerobic rods with a proteolytic metabolism such as, Fusobacterium, Porphyromonas, Prevotella and Tannerella, as well as anaerobic Gram-positive cocci. In this study, we hypothesized that protease activity is instrumental in driving bone destruction and we therefore compared the microbial composition and level of protease activity in samples of peri-implant biofluid (PIBF) from 25 healthy subjects (H group) and 25 subjects with peri-implantitis (PI group). Microbial composition was investigated using culture techniques and protease activity was determined using a FITC-labelled casein substrate. The microbial composition was highly variable in subjects both in the H and PI groups but one prominent difference was the prevalence of Porphyromonas/Prevotella and anaerobic Gram positive cocci which was significantly higher in the PI than in the H group. A subgroup of subjects with peri-implantitis displayed a high level of protease activity in the PIBF compared to healthy subjects. However, this activity could not be related to the presence of specific bacterial species. We propose that a high level of protease activity may be a predictive factor for disease progression in peri-implantitis. Further longitudinal studies are however required to determine whether assessment of protease activity could serve as a useful method to identify patients at risk for progressive tissue destruction.

Effects of bacterial products on the activity of odontoblast-like cells and their formation of type 1 collagen.

AIM: To study how products released from different bacteria in a deep carious lesion affect the metabolic activity of odontoblast-like cells and their ability to produce the major organic component of dentine, collagen 1. METHODOLOGY: MDPC-23 cells were exposed to supernatants from biofilm cultures of strains isolated from the deepest part of a carious lesion as well as from a clinical isolate of Enterococcus faecalis. Lipoteichoic acid (LTA) and lipopolysaccharide (LPS) were used for comparison. Cell activity was assessed using an methyl-thiazolyl-diphenyl tetrazolium bromide (MTT) assay, and collagen 1 levels were determined by ELISA. RESULTS: The lesion microflora was dominated by Lactobacillus spp. Neither extracellular products from the isolates nor LPS affected the activity of the MDPC-23 cells, whereas extracellular products from E. faecalis and LTA significantly reduced total cell activity (P < 0.01). Enterococcus faecalis had an inhibitory effect upon collagen 1 production by the cells, whereas no such effect or even a slight stimulatory effect was seen for the isolates from the deep carious lesion. CONCLUSIONS: These studies indicate that culture supernatants from E. faecalis reduced the metabolic activity of odontoblast-like cells as shown using the MTT assay. No effect was seen for supernatants from biofilms of bacteria recovered from a deep carious lesion. Different bacteria varied in their effects upon collagen 1 production suggesting that the nature of the bacterial species in a carious lesion may have a direct influence upon the ability of the odontoblasts to produce tertiary dentine.

Improved filters for angular filter refractometry.

Angular filter refractometry is an optical diagnostic that measures the absolute contours of a line-integrated density gradient by placing a filter with alternating opaque and transparent zones in the focal plane of a probe beam, which produce corresponding alternating light and dark regions in the image plane. Identifying transitions between these regions with specific zones on the angular filter (AF) allows the line-integrated density to be determined, but the sign of the density gradient at each transition is degenerate and must be broken using other information about the object plasma. Additional features from diffraction in the filter plane often complicate data analysis. In this paper, we present an improved AF design that uses a stochastic pixel pattern with a sinusoidal radial profile to minimize unwanted diffraction effects in the image caused by the sharp edges of the filter bands. We also present a technique in which a pair of AFs with different patterns on two branches of the same probe beam can be used to break the density gradient degeneracy. Both techniques are demonstrated using a synthetic diagnostic and data collected on the OMEGA EP (extended performance) laser.

Observation of self-similarity in the magnetic fields generated by the ablative nonlinear Rayleigh-Taylor instability.

Magnetic fields generated by the nonlinear Rayleigh-Taylor growth of laser-seeded three-dimensional broadband perturbations were measured in laser-accelerated planar targets using ultrafast proton radiography. The experimental data show self-similar behavior in the growing cellular magnetic field structures. These observations are consistent with a bubble competition and merger model that predicts the time evolution of the number and size of the bubbles, linking the cellular magnetic field structures with the Rayleigh-Taylor bubble and spike growth.

Magnetic field generation by the Rayleigh-Taylor instability in laser-driven planar plastic targets.

Magnetic fields generated by the Rayleigh-Taylor instability were measured in laser-accelerated planar foils using ultrafast proton radiography. Thin plastic foils were irradiated with ∼4-kJ, 2.5-ns laser pulses focused to an intensity of ∼10(14) W/cm(2) on the OMEGA EP Laser System. Target modulations were seeded by laser nonuniformities and amplified during target acceleration by the Rayleigh-Taylor instability. The experimental data show the hydrodynamic evolution of the target and MG-level magnetic fields generated in the broken foil. The experimental data are in good agreement with predictions from 2-D magnetohydrodynamic simulations.

Time-resolved measurements of hot-electron equilibration dynamics in high-intensity laser interactions with thin-foil solid targets.

Time-resolved K(α) spectroscopy has been used to infer the hot-electron equilibration dynamics in high-intensity laser interactions with picosecond pulses and thin-foil solid targets. The measured K(α)-emission pulse width increases from ~3 to 6 ps for laser intensities from ~10(18) to 10(19) W/cm(2). Collisional energy-transfer model calculations suggest that hot electrons with mean energies from ~0.8 to 2 MeV are contained inside the target. The inferred mean hot-electron energies are broadly consistent with ponderomotive scaling over the relevant intensity range.

Controlling fast-electron-beam divergence using two laser pulses.

This Letter describes the first experimental demonstration of the guiding of a relativistic electron beam in a solid target using two colinear, relativistically intense, picosecond laser pulses. The first pulse creates a magnetic field that guides the higher-current, fast-electron beam generated by the second pulse. The effects of intensity ratio, delay, total energy, and intrinsic prepulse are examined. Thermal and Kα imaging show reduced emission size, increased peak emission, and increased total emission at delays of 4-6 ps, an intensity ratio of 10∶1 (second:first) and a total energy of 186 J. In comparison to a single, high-contrast shot, the inferred fast-electron divergence is reduced by 2.7 times, while the fast-electron current density is increased by a factor of 1.8. The enhancements are reproduced with modeling and are shown to be due to the self-generation of magnetic fields. Such a scheme could be of considerable benefit to fast-ignition inertial fusion.

Dentine sialoprotein and collagen I expression after experimental pulp capping in humans using emdogain gel.

AIM: To characterize the hard tissue formed in human teeth experimentally pulp capped either with calcium hydroxide or with Emdogain Gel (Biora AB, Malmö, Sweden) - a derivative of enamel matrix (EMD), using two markers for dentine; dentine sialoprotein (DSP) and type 1 collagen (Col I). METHODOLOGY: Affinity-purified rabbit anti-Col I and anti-DSP polyclonal antibodies were used to stain histological sections from nine pairs of contra-lateral premolars that had been experimentally pulp amputated and randomly capped with EMDgel or calcium hydroxide. Twelve weeks after the teeth had been pulp capped, they were extracted, fixed, demineralized and serially sectioned prior to immunohistochemical staining. RESULTS: In the calcium hydroxide treated teeth DSP was seen in the new hard tissue which formed a bridge. DSP was also seen in the newly formed hard tissue in the EMDgel-treated teeth. Proliferated pulp tissue partly filled the space initially occupied by EMDgel and DSP-stained hard tissue was observed alongside exposed dentine surfaces as well as in isolated masses within the proliferated pulp tissue, although the new hard tissue did not cover the pulp exposure. DSP staining was also seen in the cells lining the hard tissue in both groups. Col I staining was seen in the newly formed hard tissue in both groups. CONCLUSIONS: The new hard tissue formed after pulp capping with EMDgel or calcium hydroxide contained DSP and Col I, considered to be markers for dentine. Thus, the newly formed hard tissue can be characterized as dentine rather than unspecific hard tissue.