RESUMEN
In this study, we report a new syringe aldehyde-derived hydrazinyl-imidazole based fluorescent sensor (L) for sensitive detection of different inorganic quenchers (halide ions, bicarbonate ion, sulphide ion and transition metal ions). The chromophore (L) was obtained in good yield by the 1:1 condensation reaction of 2-hydrazino-4,5-dihydroimidazole hydrobromide and 4-hydroxy-3,5-dimethoxy benzaldehyde. L exhibited strong fluorescence in the visible region (around 380 nm) and its interaction with different quenchers was studied in details via fluorescence technique. For the halide ions series, its sensitivity is higher for NaF (Climit = 4 × 10- 4 M) than for NaCl while the fluorescence quenching occurred mainly through a dynamic process. Similar considerations were observed for HCO3- and S2- quencher too, when static and dynamic quenching take place simultaneously. Regarding transition metal ions, at a fixed ion concentration (4 × 10- 6 M), best performance was achieved for Cu2+ and Fe2+ (fluorescence intensity was reduced by 79% and 84.9% respectively), while for other metal ions, the sensor performance was evaluated and found to be very less (< 40%). Thus, minimum detection limits (10- 6 - 10- 5 M range) recommended the use of such derivatives as highly sensitive sensors capable to monitor delicate changes in varied environments.
RESUMEN
Two Cu(II)-based metal-organic frameworks (MOFs) having paddle-wheel secondary building units (SBUs), namely, 1Me and 1ipr, were synthesized solvothermally using two new bent di-isophthalate ligands incorporating different substituents. The MOFs showed high porosity (BET surface area, 2191 m2/g for 1Me and 1402 m2/g for 1ipr). For 1Me, very high CO2 adsorption (98.5 wt % at 195 K, 42.9 wt % at 273 K, 23.3 wt % at 298 K) at 1 bar was found, while for 1ipr, it was significantly less (14.3 wt % at 298 K and 1 bar, 54.4 wt % at 298 K at 50 bar). 1Me exhibited H2 uptake of 3.2 wt % at 77 K and 1 bar of pressure, which compares well with other benchmark MOFs. For 1ipr, the H2 uptake was found to be 2.54 wt % under similar experimental conditions. The significant adsorption of H2 and CO2 for 1Me could be due to the presence of micropores as well as unsaturated metal sites in these MOFs besides the presence of substituents that interact with the gas molecules. The experimental adsorption behavior of the MOFs could be justified by theoretical calculations. Additionally, catalytic conversions of CO2 and CS2 into useful chemicals like cyclic carbonates, cyclic trithiocarbonates, and cyclic dithiocarbonates could be achieved.
RESUMEN
A robust paddle-wheel Cu(II)-based metal-organic framework (MOF) 1, having dual functionalities, namely, Lewis acid and basic sites, has been explored as a heterogeneous catalyst. This MOF, because of its large void volume (10298 Å3, 67.6%), large surface area (1480 m2/g), and high thermal stability, encouraged us to see its applicability in two catalytic reactions, namely, oxidative C-O coupling (cross-dehydrogentaive coupling reaction) involving direct C-H activation and Friedländer reaction under solvent free and ambient conditions. This study demonstrates the green aspect of MOFs in coupling reactions because of the simplified recovery, shorter reaction time, minimum waste, and smooth activation of the C-H bond, which is very challenging in synthetic chemistry.
RESUMEN
The secondary amine donors present in the bridges of a laterally nonsymmetric oxa-aza cryptand have been derivatized with l-proline to obtain the chiral cryptand L. The cryptand L efficiently catalyzed aldol reactions in water with up to 75% ee. On reacting with Co(II) perchlorate in the presence of KSCN, L readily formed the trinuclear complex {[Co3(L)2(NCS)6]·(15CH3CN)(5acetone)(6H2O)} (1). The complex 1 in combination with the cocatalyst tetrabutylammonium bromide (TBAB) formed an efficient catalytic system in the synthesis of cyclic carbonates from CO2 and epoxides at room temperature and atmospheric pressure.
RESUMEN
A highly porous and thermally stable anionic Zn(II)-framework, {[(CH3)2NH2+]2[Zn3((µ3-O))(L)2(H2O)]·4DMF·2H2O}n (1), having exposed metal sites and pendant amine groups has been synthesized adopting the solvothermal technique. This anionic 3D framework showed two-fold interpenetration with 45.1% void volume. It has a 3,6-c binodal net with rare sit 3,6-conn topology. The metal bound aqua ligand could be easily removed along with the guest molecules in the lattice upon activation to afford the desolvated framework 1'. This produced exposed metal sites that, along with the pendant amine groups incorporated in the ligand, generated a coordination space in the framework to make it an outstanding heterogeneous catalyst for the chemical fixation of CO2 with various epoxides under atmospheric pressure and in the three-component Biginelli reaction with different aldehydes, ethyl acetoacetate, and urea to afford dihydropyrimidinones.
RESUMEN
The solvothermal reaction of Zn(NO3)2·6H2O and a linear dicarboxylate ligand H2L, in the presence of urotropine in N,N'-dimethylformamide (DMF), gives rise to a new porous two-dimensional (2D) coordination network, {[Zn3(L)3(urotropine)2]·2DMF·3H2O}n (1), with hxl topology. Interestingly, framework 1 exhibits excellent emission properties owing to the presence of naphthalene moiety in the linker H2L, that can be efficiently suppressed by subtle quantity of nitro explosives in aqueous medium. Furthermore, presence of urotropine molecules bound to the metal centers, 1 is found to be an excellent heterogeneous catalyst meant for atom-economical C-C bond-forming Baylis-Hillman reactions. Additionally, crystals of 1 undergo complete transmetalation with Cu(II) to afford isostructural 1Cu. Moreover, the 2D framework of 1 allows replacement of urotropine molecules by 4,4'-azopyridine (azp) linker resulting in a three-dimensional (3D) metal-organic framework, {[Zn(L)(azp)]·4DMF 2H2O}n (2). The 1â2 transformation takes place in single-crystal-to-single crystal manner supported by powder X-ray diffraction, atomic force microscopy, high-resolution transmission electron microscopy, and morphological studies. Remarkably, during this 2Dâ3D transformation, the original trinuclear [Zn3(COO)6] secondary building unit changes to a mononuclear node, which is unprecedented.
RESUMEN
The ligand H2L has been built by linking an imidazole moiety to the 5-position of isophthalic acid. It forms two types of porous frameworks, {[Zn(L)]·2DMF·2H2O}n (1) and {[(CH3)2NH2][Zn2(L)(H2O)PO4]·2DMF}n (2). 1 is a porous neutral framework and has rtl rutile 3,6-conn topology, while 2 is an organo-metallophosphate anionic porous framework with double-walled hexagonal channels. Framework 1' (desolvated) exhibits moderate CO2 adsorption (58 cc g-1 at 273 K, 1 bar), whereas 2' (desolvated) shows a microporous nature with a high adsorption of CO2 (111.7 cc g-1 or 22 wt % at 273 K, 1 bar). Interestingly, this adsorbed CO2 could be converted very efficiently to cyclic carbonates under mild conditions using 2' as the catalyst in the presence of tetrabutylammonium bromide as the cocatalyst. The presence of open metal sites in 2' makes it an efficient heterogeneous catalyst for solvent-free three-component Strecker reaction using various aldehydes/ketones together with amines and trimethylsilyl cyanide in high yields at room temperature. The straightforward experimental and product isolation procedure along with easy recovery and reusability of the catalyst provided an attractive route for the synthesis of α-amino nitriles.
RESUMEN
A chiral tetracarboxylic acid ligand, H4L, incorporating the (S)-(+)-2-methylpiperazine moiety in its middle, solvothermally forms a homochiral Cu(II) framework, {[Cu2(L)(H2O)2]·(4DMF)(4H2O)}n (LCu). It forms a non-interpenetrated structure consisting of [Cu2(COO)4] paddle-wheel secondary bonding units (SBUs) with NbO topology. Interestingly, the framework LCu exhibits excellent ferroelectric properties. It shows a remnant polarization (Pr) of â¼3.5 µC cm-2 and a coercive field (Ec) of â¼12 kV cm-1 with a distinct electric hysteresis loop. Dielectric studies of LCu reveal almost frequency-independent behavior with a dielectric constant (εr) of â¼42 and a low dielectric loss (tan δ) of â¼0.04 up to 106 Hz, for potential use in high-frequency applications. In addition, activated framework LCu' having uncoordinated metal sites acts as an efficient heterogeneous catalyst in the three-component coupling of amines, aldehydes, and alkynes, as well as in Pechmann reactions of phenols with ß-ketoesters.
RESUMEN
A linear tetracarboxylic acid ligand, H4 L, with a pendent amine moiety solvothermally forms two isostructural metal-organic frameworks (MOFs) LM (M=ZnII , CuII ). Framework LCu can also be obtained from LZn by post- synthetic metathesis without losing crystallinity. Compared with LZn , the LCu framework exhibits high thermal stability and allows removal of guest solvent and metal-bound water molecules to afford the highly porous, LCu '. At 77â K, LCu ' absorbs 2.57â wt % of H2 at 1â bar, which increases significantly to 4.67â wt % at 36â bar. The framework absorbs substantially high amounts of methane (238.38â cm3 g-1 , 17.03â wt %) at 303â K and 60â bar. The CH4 absorption at 303â K gives a total volumetric capacity of 166â cm3 (STP) cm-3 at 35â bar (223.25â cm3 g-1 , 15.95â wt %). Interestingly, the NH2 groups in the linker, which decorate the channel surface, allow a remarkable 39.0â wt % of CO2 to be absorbed at 1â bar and 273â K, which comes within the dominion of the most famous MOFs for CO2 absorption. Also, LCu ' shows pronounced selectivity for CO2 absorption over CH4 , N2 , and H2 at 273â K. The absorbed CO2 can be converted to value-added cyclic carbonates under relatively mild reaction conditions (20â bar, 120 °C). Finally, LCu ' is found to be an excellent heterogeneous catalyst in regioselective 1,3-dipolar cycloaddition reactions ("click" reactions) and provides an efficient, economic route for the one-pot synthesis of structurally divergent propargylamines through three-component coupling of alkynes, amines, and aldehydes.
RESUMEN
l-Proline has been covalently attached in a rigid linear ligand, H4L, having an isophthalate moiety at each terminal to form the chiral ligand, H4LPRO. This linker has been used for the construction of a porous MOF, LCuPRO. The free l-proline moiety in the cavity of the framework in the presence of imidazole as a cocatalyst functions synergistically to catalyze the Baylis-Hillman reaction between α,ß-unsaturated carbonyl compounds and aromatic aldehydes. High porosity of the framework is proven by the nitrogen adsorption isotherm.
RESUMEN
A partially fluorinated, angular tetracarboxylic acid linker (H4L) incorporating a pendant amine moiety forms a three-dimensional Zn(II) framework, 1. The structure consists of paddle-wheel Zn2(CO2)4 secondary building units (SBUs) and Zn12(CO2)24 supramolecular building blocks (SBBs). Thermal stability of 1 is found to be low. However, it undergoes transmetalation reaction with Cu(II) at room temperature without losing crystallinity affording an isostructural framework, 1Cu. Framework 1Cu is thermally robust and allows generation of the solvent-free porous framework 1Cu' upon activation with coordinatively unsaturated metal centers. Framework 1Cu' exhibits water stability and at 77 K, adsorbs 2.56 wt % of H2 up to 1 bar that significantly increases to 4.01 wt % at 13 bar. Also, this framework gives a high adsorption of 164.70 cc/g of CH4 (11.7 wt %) at 303 K and 60 bar. The channel surfaces decorated with -NH2 group and unsaturated metal centers in 1Cu' allow a promising 36.4 wt % of CO2 adsorption at 1 bar and 273 K. Moreover, it exhibits pronounced selectivity of CO2 adsorption over N2 and H2 at 273 K. Finally, the versatility of 1Cu' is shown by its excellent heterogeneous catalytic activity in the Biginelli coupling reactions involving an aldehyde, urea, and ethylacetoacetate to afford dihydroprimidinones.
RESUMEN
A twofold interpenetrated pillared-bilayer framework, {[Zn3 (L)2 (L2 )(DMF)]â (18DMF)(6H2 O)}n (1), has been synthesized from the ligands tris(4'-carboxybiphenyl)amine (H3 L) and 1,2-bis(4-pyridyl)ethylene (L2 ). The structure contains [Zn3 (COO)6 ] secondary building units (SBUs), in which three Zn(II) ions are almost linear with carboxylate bridging. This framework undergoes reversible pillar linker substitution reactions at the terminal Zn(II) centers with three different dipyridyl linkers of different lengths to afford three daughter frameworks, 2-4. Frameworks 2-4 are interconvertible through reversible linker substitution reactions. Also, competitive linker-exchange experiments show preferential incorporation of linker L3 in the parent framework 1. The larger linker L5 does not undergo such substitution reactions and framework 5, which contains this linker, can be synthesized solvothermally as a twofold interpenetrated structure. Interestingly, when framework 5 is dipped in a solution of L3 in DMF, linker substitution takes place as before, but linker L5 now moves and diagonally binds two Zn(II) centers to afford 6 as a nonpenetrated single framework. This linker place exchange reaction is unprecedented. All of these reactions take place in a single-crystal to single-crystal (SC-SC) manner, and have been observed directly through X-ray crystallography. In addition, each 3D framework undergoes complete copper(II) transmetalation.
RESUMEN
By using a bent tetracarboxylic acid ligand that incorporates a pendent-NH2 functional group, a 3D Zn(II)-framework (1) based on Zn2 (CO2)4 secondary building units and Zn12 (CO2)24 supramolecular building blocks has been synthesized. Framework 1 is thermally less stable, which precludes its application as a porous framework for gas adsorption or catalytic studies. This framework undergoes single-crystal to single-crystal transmetalation to give isostructural 1Cu. Unlike 1, the Cu(II) analogue is very stable and can be activated by removing metal-bound lattice solvent molecules by heating to afford 1Cu'. The activated 1Cu' exhibits excellent H2 storage (2.29 wt%) at 77 K and a high 32.1 wt% CO2 uptake at 273 K. Additionally, it displays significant selectivity for CO2 adsorption over N2 and H2 and can catalyse size-selective Knoevenagel condensation reactions.
RESUMEN
Herein, we have reported a novel quinazolin-based Schiff base chemosensor (E)-2-benzamido-N'-(1-(pyridin-2-yl)ethylidene)benzohydrazide (L). L has been designed, synthesised and characterised by 1H-NMR, IR spectroscopy, ESI-MS spectrometry and theoretical studies. The receptor showed appreciable colorimetric λ max shift for both Ni2+ and Zn2+ ions and fluorometric "turn on" response in presence of only Zn2+ ion. The Jobs plot analysis revealed that receptor forms 2 : 1 complex with both the ions Ni2+ and Zn2+, further confirmed by ESI-MS analysis. The single crystal structure of L-Ni2+ complex (1) has also been determined. The colorimetric detection limits were calculated to 7.9 nM and 7.5 nM respectively for Ni2+ and Zn2+ in methanol-Tris-HCl buffer medium (10 mM, pH 7.2, 1 : 1 v/v). The chemosensor L can be applied for the recovery of contaminated water samples.
RESUMEN
A series of three positional isomers of organic cages namely o-OC, m-OC, and p-OC, have been self-assembled using dynamic covalent chemistry. Their room temperature controlled fabrication with palladium gives ultrafine diameter (1-2 nm) of palladium nanoparticles (Pd NPs). We observed that the shape-flexibility of cages have great impact on the formation of Pd NPs. Theoretical calculations reveals that theoretically obtainable size of Pd NPs for each cage which was complementary to the experimental results. Theoretical studies indicate that the driving forces for the specific orientational preference may be ascribed to subtle variations on the level of π-π interactions, which ultimately governs the growth of Pd NPs therein. It is the first example of shape-flexible synthesis of organic cages where flexibility governs the nanoparticle growth. Pd NPs have shown excellent catalysis of Tsuji-Trost allylation at room temperature and pressure in water.
RESUMEN
A Cu(ii) metal-organic framework, {[Cu2(L)(H2O)2]·(5DMF)(4H2O)}n (1), has been synthesized using an angular tetracarboxylic acid ligand (H4L) incorporating both trifluoromethyl (-CF3) and amine (-NH2) groups. Notably, the framework possesses high water and thermal stability. At atmospheric pressure, the activated framework 1' exhibits substantially high amounts of CO2 (35.5 and 20.8 wt% at 273 and 298 K respectively) and H2 (1.72 wt% at 77 K) adsorption. Also, 1' exhibits excellent catalytic activity for the condensation-cyclization reaction between 2-benzoyl pyridine and different benzylamines via oxidative amination of the C(sp3)-H bond to form 1,3-diarylated imidazo[1,5-a]pyridines under mild aerobic conditions. In addition to this, 1' shows excellent heterogeneous catalytic activity in Biginelli reactions. The solid catalyst could be recycled several times without significant loss in the catalytic activities.
RESUMEN
A three-dimensional NbO type porous metal-organic framework 1 containing both tertiary amine groups and paddle wheel dinuclear Cu2(COO)4 secondary building units as the active centre was synthesized at room temperature. The activated framework 1' can be used as an efficient heterogeneous catalyst for the synthesis of quinoline derivatives by the Friedländer reaction and for the synthesis of ß-nitroalcohols by the Henry (nitroaldol) reaction. This MOF-based heterogeneous catalyst is easily recycled and reused further without losing its structural integrity and catalytic activity.
RESUMEN
The linker 5-(benzylamino)isophthalic acid (H2L) forms a robust 2D Zn(ii)-coordination polymer, {[Zn8(L)6(µ3-OH)4(H2O)6]·(DMF)·(H2O)2.5}n(1Zn) consisting of [Zn4(µ3-OH)2]6+ SBUs. It further shows strong ππ interactions between the layers to form an overall 3D structure with well-defined channels. Metal bound water molecules are directed towards these channels. Upon heating, these metal bound water molecules are lost along with lattice solvent molecules to afford coordinatively unsaturated metal centers that can be utilized as an efficient heterogeneous catalyst for the C-C bond forming nitroaldol or Henry reaction. The solid catalyst can be recycled at least three times without losing its catalytic activity. The easily accessible channels in 1Zn are found suitable for the SC-SC transmetalation reaction with Cu(ii) producing 1Cu. The catalytic activity of 1Cu is found to be comparable to that of 1Zn. Furthermore, the framework 1Zn gives high emission in DMSO, which can be efficiently quenched by trace amounts of nitro explosives. All the complexes have been characterized by single crystal X-ray diffraction, powder X-ray diffraction, IR, thermogravimetry and elemental analysis.
RESUMEN
A porous Cu(ii)-MOF shows an adsorption of 6.6 wt% of H2 at 77 K and 62 bar and a very high 60 wt% of CO2 at 298 K and 32 bar. When air is bubbled into a suspension of the activated MOF in the presence of different epoxides at room temperature, the CO2 in air is readily converted into the corresponding cyclic carbonates.
RESUMEN
Describes a contrast study of the nasopharynx, which was studied in 24 cases. Benign lesions occurred in 8 cases, while all other cases suffered from malignant neoplasms. An attempt is made to discuss the incidence and epidemiology of nasopharyngeal neoplasms. All types of nasopharyngeal mass lesions, especially neoplasms, are covered. Two roentgenograms, a subments-vertical and one lateral, were taken from each subject. Different types of radiological pictures, characteristic for different histopathological lesions, are described. The prediction of the histopathological nature of the lesions was made possible by considering the typical filling defect in nasopharyngographic pictures. In combination with other methods of examination, the contrast study should be able to detect early nasopharyngeal cancer. A good correlation is possible between contrast examination and clinical and histopathological examination. Contrast study of the nasopharynx should be done routinely in the staging of Hodgkin's disease, but also at certain intervals, to evaluate radiography response in nasopharyngeal neoplasms