Purification of pharmaceutical-grade plasmid DNA by anion-exchange chromatography in an RNase-free process.

Anion-exchange is the most popular chromatography technique in plasmid DNA purification. However, poor resolution of plasmid DNA from RNA often results in the addition of bovine-derived ribonuclease (RNase) A to degrade RNA impurities which raises regulatory concerns for the production of pharmaceutical-grade plasmid DNA. Low capacity for plasmid of most commercial media is another issue affecting the suitability of anion-exchange chromatography for large-scale processing. This study reports the use of anion-exchange chromatography to remove RNA in an RNase-free plasmid purification process. Resolution was achieved through careful selection of adsorbent and operating conditions as well as RNA reduction steps before chromatography. Dynamic capacity for plasmid was significantly increased (to 3.0mg/ml) so that it is now possible to envisage the large-scale manufacturing of therapeutic-grade plasmid DNA in the absence of added RNase using anion-exchange chromatography as a polishing step.

Quality attributes of recombinant therapeutic proteins: an assessment of impact on safety and efficacy as part of a quality by design development approach.

Quality by Design (QbD) is a new approach to the development of recombinant therapeutic protein products that promotes a better understanding of the product and its manufacturing process. The first step in the QbD approach consists in identifying the critical quality attributes (CQA), i.e., those quality attributes of the product that have an impact on its clinical efficacy or safety. CQAs are identified through a science-based risk assessment taking into consideration a combination of clinical and nonclinical data obtained with the molecule or other similar molecules or platform products, as well as the published literature. The purpose of this article is to perform a comprehensive review of the published literature, supporting an assessment of the impact on safety and efficacy of the quality attributes commonly encountered in recombinant therapeutic proteins, more specifically those produced in mammalian cell expression systems. Quality attributes generally observed in biopharmaceutical proteins including product-related impurities and substances, process-related impurities, product attributes, and contaminants are evaluated one by one for their impact on biological activity, pharmacokinetics and pharmacodynamics, immunogenicity, and overall safety/toxicity.

Application of the quality by design approach to the drug substance manufacturing process of an Fc fusion protein: towards a global multi-step design space.

The article describes how Quality by Design principles can be applied to the drug substance manufacturing process of an Fc fusion protein. First, the quality attributes of the product were evaluated for their potential impact on safety and efficacy using risk management tools. Similarly, process parameters that have a potential impact on critical quality attributes (CQAs) were also identified through a risk assessment. Critical process parameters were then evaluated for their impact on CQAs, individually and in interaction with each other, using multivariate design of experiment techniques during the process characterisation phase. The global multi-step Design Space, defining operational limits for the entire drug substance manufacturing process so as to ensure that the drug substance quality targets are met, was devised using predictive statistical models developed during the characterisation study. The validity of the global multi-step Design Space was then confirmed by performing the entire process, from cell bank thawing to final drug substance, at its limits during the robustness study: the quality of the final drug substance produced under different conditions was verified against predefined targets. An adaptive strategy was devised whereby the Design Space can be adjusted to the quality of the input material to ensure reliable drug substance quality. Finally, all the data obtained during the process described above, together with data generated during additional validation studies as well as manufacturing data, were used to define the control strategy for the drug substance manufacturing process using a risk assessment methodology.

Application of Quality by Design to the characterization of the cell culture process of an Fc-Fusion protein.

The production bioreactor step of an Fc-Fusion protein manufacturing cell culture process was characterized following Quality by Design principles. Using scientific knowledge derived from the literature and process knowledge gathered during development studies and manufacturing to support clinical trials, potential critical and key process parameters with a possible impact on product quality and process performance, respectively, were determined during a risk assessment exercise. The identified process parameters were evaluated using a design of experiment approach. The regression models generated from the data allowed characterizing the impact of the identified process parameters on quality attributes. The main parameters having an impact on product titer were pH and dissolved oxygen, while those having the highest impact on process- and product-related impurities and variants were pH and culture duration. The models derived from characterization studies were used to define the cell culture process design space. The design space limits were set in such a way as to ensure that the drug substance material would consistently have the desired quality.

Precipitation of RNA impurities with high salt in a plasmid DNA purification process: use of experimental design to determine reaction conditions.

The use of high salt solution to precipitate RNA in a pharmaceutical-grade plasmid DNA purification process was investigated. Five antichaotropic salts were tested for their potential to precipitate RNA. Calcium chloride was by far the best precipitant with high RNA removal in a very short incubation time. Calcium chloride precipitation conditions were investigated at two stages of a plasmid purification process using experimental design techniques. The effect of up to five factors on RNA precipitation and plasmid recovery was assessed by statistical modeling. Optimized conditions for calcium chloride precipitation were then introduced to the plasmid purification process resulting in the efficient removal of most impurities (RNA, chromosomal DNA, proteins, and endotoxins).

Removal of RNA impurities by tangential flow filtration in an RNase-free plasmid DNA purification process.

Addition of animal-derived ribonuclease A to degrade RNA impurities is not recommended in the manufacture of pharmaceutical-grade plasmid DNA. Tangential flow filtration (TFF) takes advantage of the significant size difference between RNA and plasmid DNA to remove RNA in the permeate while plasmid remains in the retentate, in an RNase-free plasmid purification process. Operating conditions including transmembrane pressure, membrane pore size, conductivity of the diafiltration buffer, and plasmid load on the membrane were investigated to maximize RNA clearance. Although direct TFF of clarified lysate removed substantial amounts of RNA, the RNA levels left in the retentate were still significant. Calcium chloride is a potent precipitant of high-molecular-weight RNA. The addition of calcium chloride to the clarified lysate combined with the clearance of low-molecular-weight RNA by TFF resulted in complete RNA removal and high plasmid recovery.