Application of microorganisms in concrete: a promising sustainable strategy to improve concrete durability.

The beneficial effect of microbially induced carbonate precipitation on building materials has been gradually disclosed in the last decade. After the first applications of on historical stones, promising results were obtained with the respect of improved durability. An extensive study then followed on the application of this environmentally friendly and compatible material on a currently widely used construction material, concrete. This review is focused on the discussion of the impact of the two main applications, bacterial surface treatment and bacteria based crack repair, on concrete durability. Special attention was paid to the choice of suitable bacteria and the metabolic pathway aiming at their functionality in concrete environment. Interactions between bacterial cells and cementitious matrix were also elaborated. Furthermore, recommendations to improve the effectiveness of bacterial treatment are provided. Limitations of current studies, updated applications and future application perspectives are shortly outlined.

The effect of seed sludge type on aerobic granulation via anoxic-aerobic operation.

The effects of two seed sludge types, namely conventional activated sludge (CAS) and membrane bioreactor sludge (MBS), on aerobic granulation were investigated. The treatment performances of the reactors were monitored during and after the granulation. Operational period of 37 days was described in three phases; Phase 1 corresponds to Days 1-10, Phase 2 (overloading conditions) to Days 11-27 and Phase 3 (recovery) to Days 28-37. Aerobic granules of 0.56 ± 0.23 to 2.48 ± 1.28 mm were successfully developed from both MBS and CAS. First granules appeared on Day 9 in both reactors, indicating that there was no difference between two seed sludge types in terms of the time period for granulation initiation. The results revealed that the granules developed from MBS performed better than CAS in terms of settleability, stability, biomass retention, adaptation, protection of granular structure at high loading rates (0.86 g N/L d and 3.92 g COD/L d) and low COD/TAN ratio (5). Granules of MBS were also found to be capable of providing better protection for nitrifiers at toxic free-ammonia concentrations (38-46 mg/L NH3-N), thus showing better treatment recovery than those of CAS.

Nitrite producing bacteria inhibit reinforcement bar corrosion in cementitious materials.

Chemicals and synthetic coatings are widely used to protect steel against corrosion. Bio-based corrosion inhibition strategies can be an alternative in the arising bioeconomy era. To maintain the good state of steel reinforcement in cracked concrete, microbe-based self-healing cementitious composites (MSCC) have been developed. Yet, proposed strategies involve reasonably slow crack filling by biomineralization and thus risk the possible rebar corrosion during crack healing. Here we upgrade the rebar protection to a higher level by combining MSCC with microbial induced corrosion inhibition. Presented NO3- reducing bacterial granules inhibit rebar corrosion by producing the anodic corrosion inhibitor NO2- and meanwhile heal a 300-µm-wide crack in 28 days. During 120 days exposure to 0.5 M Cl- solution, the rebars in cracked MSCC keep showing open circuit potentials above the critical value of -250 mV and they lose less than 2% of the total rebar material which corresponds to half the material loss in cracked plain mortar. Overall, the obtained rebar protection performance is comparable with that of uncracked mortar and mortar containing chemical inhibitor, hence the microbe-based system becomes an alternative to the traditional methods.

The effects of aerobic/anoxic period sequence on aerobic granulation and COD/N treatment efficiency.

The effects of period sequence (anoxic-aerobic and aerobic-anoxic) on aerobic granulation from suspended seed sludge, and COD, N removal efficiencies were investigated in two sequencing batch reactors. More stable granules with greater sizes (1.8-3.5mm) were developed in R1 (anoxic-aerobic sequence). Yet, no significant difference was observed between the reactors in terms of removal efficiencies. Under optimum operational conditions, 92-95% COD, 89-90% TAN and 38-46% total nitrogen removal efficiencies were achieved. The anoxic-aerobic period sequence (R1) resulted in almost complete denitrification during anoxic periods while aerobic-anoxic sequence (R2) led to nitrate accumulation due to limited-carbon source and further granule disintegration. NH3-N concentration of 15-28 mg/L was found to inhibit COD removal up to 30%. This study also revealed the inhibitory sulfide production during anoxic periods. Sulfate concentration of 52.6-70.2mg/L was found to promote sulfate reduction and sulfide generation (0.24-0.62 mg/L) which, together with free-ammonia, inhibited TAN oxidation by 10-50%.