NiCo2O4@SnS2nanosheets on carbon cloth as efficient bi-functional material for high performance supercapacitor and sensor applications.

Bi-functional materials provide an opportunity for the development of high-performance devices. Up till now, bi-functional performance of NiCo2O4@SnS2nanosheets is rarely investigated. In this work, NiCo2O4@SnS2nanosheets were synthesized on carbon cloth by utilizing a simple hydrothermal technique. The developed electrode (NiCo2O4@SnS2/CC) was investigated for the detection of L-Cysteine and supercapacitors applications. As a non-enzymatic sensor, the electrode proved to be highly sensitive for the detection of L-cysteine. The electrode exhibits a reproducible sensitivity of 4645.82µA mM-1cm-2in a wide linear range from 0.5 to 5 mM with a low limit of detection (0.005µM). Moreover, the electrode shows an excellent selectivity and long-time stability. The high specific surface area, enhanced kinetics, good synergy and distinct architecture of NiCo2O4@SnS2nanosheets produce a large number of active sites with substantial energy storage potential. As a supercapacitor, the electrode exhibits improve capacitance of 655.7 F g-1at a current density of 2 A g-1as compare to NiCo2O4/CC (560 F g-1). Moreover, the electrode achieves 95.3% of its preliminary capacitance after 10 000 cycles at 2 A g-1. Our results show that NiCo2O4@SnS2/CC nanosheets possess binary features could be attractive electrode material for the development of non-enzymatic biosensors as well as supercapacitors.

Retention of methyl iodide on metal and TEDA impregnated activated carbon using indigenously developed setup.

Removal of methyl iodide (CH3I) from the air present within nuclear facilities is a critical issue. In case of any nuclear accident, there is a great need to mitigate the radioactive organic iodide immediately as it accumulates in human bodies, causing severe consequences. Current research focuses on removing organic iodides, for which the surface of activated carbon (AC) was modified by impregnating it with different metals individually, i.e. Ag, Ni, Zn, Cu and with the novel combination of these four metals (AZNC). After the impregnation of metals, triethylenediamine (TEDA) was coated on metal impregnated activated carbon (IAC) surface. The adsorption capacity of the combination of four metals IAC was found to be 276 mg/g as the maximum for the trapping of CH3I. Whereas TEDA-metal impregnation on ACs enhanced the removal efficiency of CH3I up to 352 mg/g. After impregnation, adsorption capacity of AZNC and AZNCT is significantly higher as compared to AC. According to the finding, t5% of AZNCT IAC is 46 min, which is considerably higher than the t5% of other tested adsorbents. According to isotherm fitting data, Langmuir isotherm was found superior for describing CH3I sorption onto AC and IACs. Kinetics study shows that pseudo second order model represented the sorption of CH3I more accurately than the pseudo first order. Thermodynamic studies gave negative value of ΔG which shows that the reaction is spontaneous in nature. Based on the findings, AZNCT IAC appears to have a great potential for air purification applications in order to obtain clean environment.

Mesoporous Co3O4@CdS nanorods as anode for high-performance lithium ion batteries with improved lithium storage capacity and cycle life.

Transition metal oxides based anodes are facing crucial problems of capacity fading at long cycles and high rates due to electrode degradations. In this prospective, an effective strategy is employed to develop advanced electrode materials for lithium-ion batteries (LIBs). In the present work, a mesoporous Co3O4@CdS hybrid sructure is developed and investigated as anode for LiBs. The hybrid structure owning porous nature and large specific surface area, provides an opportunity to boost the lithium storage capabilities of Co3O4 nanorods. The Co3O4@CdS electrode delivers an initial discharge capacity of 1292 mA h g-1 at 0.1C and a very stable reversible capacity of 760 mA h g-1 over 200 cycles with a capacity retention rate of 92.7%. In addition, the electrode exhibits excellent cyclic stability even after 800 cycles and good rate performance as compared to previously reported electrodes. Moreover, density functional theory (DFT) and electrochemical impedance spectroscopy (EIS) confirm the enhanced kinetics of the Co3O4@CdS electrode. The efficient performance of the electrode may be due to the increased surface reactivity, abundant active sites/interfaces for rapid Li+ ion diffusion and the synergy between Co3O4 and CdS NPs. This work demonstrates that Co3O4@CdS hybrid structures have great potential for high performance batteries.

Pollution level and health risk assessment of road dust from an expressway.

Thirteen road dust and four soil samples were analyzed using instrumental neutron activation analysis (INAA) to determine the elemental composition of road dust collected from Islamabad Expressway. The amounts of most of the elements determined were generally in the lower range of the global data with the exception of Ce, Nd, Sn and Zr, which were measured at higher concentrations in Islamabad. The magnitudes of Enrichment Factors (EFs) showed that the area around Islamabad Expressway is low to moderately polluted especially by elements such as Mg and Sb. Elemental health risk was assessed through dose calculations for carcinogenic and non-carcinogenic metals; and by the determination of LADD (lifetime average daily dose). The carcinogenic metals studied showed the following variation in their LADD values; Cr>Ni>Co>Cd>As. Dose calculations for non-cancerous and cancerous elements showed the data obtained to lie within the safe threshold of 10(-3)-10(-6) mg kg(-1) day(-1) for most elements. The Soil-based elements Al, Fe, K, Mg, Na and Ti were the exception and originated from the exposed soil around the highway. Moreover highest Hazard Index (HI) was found to be associated with the presence of Al, Cr, Pb and V in road dust showing soil, transport and industry to be the major sources of road dust.

Green Production and Interaction of Carboxylated CNTs/Biogenic ZnO Composite for Antibacterial Activity.

Using biomolecule-rich plant extracts, the conversion of metal ions to metal oxide nanoparticles via abiogenic approach is highly intriguing, environmentally friendly, and quick. The inherent inclination of plant extracts function as capping agents in the insitu synthesis. In this study, biogenic zinc oxide nanoparticles (ZnO-NPs) were synthesized using an aqueous leaf extract from Moringaoleifera. The ZnO-NPs were then mixed with carboxylated carbon nanotubes (CNTs) to create a carboxylated CNTs/biogenic ZnO composite using asol-gel method. The CNTs/ZnO composite displayed 18 mm, 16 mm, and 17 mm zones of inhibition (ZOI) against Bacillus cereus, Pseudomonas aeruginosa, and Escherichia coli, respectively. In contrast with ZnO-NPs, the produced carboxylated CNTs/ZnO composite demonstrated a 13 percent elevation in ZOI as antibacterial activity against Bacillus cereus ATCC 19659, Escherichia coli ATCC 25922, and Pseudomonas aeruginosa ATCC 27853. The characterization of ZnO-NPs and the carboxylated CNTs/ZnO composite were performed via FTIR, UV/Vis spectroscopy, SEM, and XRD. The XRD pattern depicted a nano-sized crystalline structure (Wurtzite) of ZnO-NPs and a carboxylated CNTs/ZnO composite. The current work comprehends a valuable green technique for killing pathogenic bacteria, and gives fresh insights into the manufacture of metal oxide composites for future research.

Occurrence and profile of organophosphorus compounds in fine and coarse particulate matter from two urban areas of China and Pakistan.

Seven organophosphorus compounds (OPs) were measured in urban fine and coarse particulate matter (PM) collected from two sites of Nanjing (XCNUC), China and Islamabad (APHSP), Pakistan. The fine PM mass at APHSP site was significantly higher (p = 0.005) in the spring (mean 22.5 µg/m3) than in the summer (mean 12.7 µg/m3). The total concentration, ∑7OPs, of samples collected at APHSP was found significantly higher in coarse (range 672-47621 pg/m3) than in fine PM (range 1200-15213 pg/m3); while ∑7OPs from XCNUC in fine (range 1696-15063 pg/m3) and coarse PM (range 2053-5379 pg/m3) were statistically different in samples during summer, based on two-sample t-test at 0.05 confidence interval. Seasonally, ∑7OPs was found to be higher in the samples of Nanjing (9510 ± 3633 pg/m3) in the summer than in the spring. In contrast, the samples of Islamabad had higher ∑7OPs (25558 ± 16255 pg/m3) in the spring than in the summer. Tri(chloropropyl) phosphate (TCEP) was found at higher concentration than any other OPs in the samples from the XCNUC site. Triphenyl phosphate (TPhP) was found at extremely high levels from APHSP, which may attributed to its use in jet fuel. Most of the ∑OPs concentrations were found significantly different in both PMs at both sites due to their diverse sources. Both sites showed strong correlation of ∑OPs with TCEP in both PMs, indicating similar mode of transfer from sources like plastics, lacquer, paint, glue, industrial processes and foam fillers. Relative abundance of OPs in fine and coarse PM differs amongst OP congeners and concerning seasons, with these variations attributed to different mechanisms of mass transfer such as volatilization, condensation and abrasions. Moreover, triphenylphosphine oxide (TPPO) has been reported in outdoor PMs. This is the first study on the occurrence of OPs in atmospheric fine and coarse PM and their seasonal variation from Pakistan and China.