Flexible generation of broadly wavelength- and OAM-tunable Laguerre-Gaussian (LG) modes from a random fiber laser.

Broadband wavelength tunable Laguerre-Gaussian (LG) mode with flexibly manipulated topological charge is greatly desired for large-capacity optical communication. However, the operating wavelengths achieved for the current LG modes are significantly restricted either by the emission spectrum of the intracavity gain medium or by the operation wavelengths of mode-conversion or modulation components. Here, broadband wavelength-tunable LG modes with a controllable topological charge are generated based on a random fiber laser (RFL) and a digital micromirror device (DMD). The RFL can produce broadly wavelength-tunable laser emissions spanning from 1044 to 1403 nm with a high spectral purity and an excellent beam quality, benefiting from the cascaded random Raman gain starting from a ytterbium fiber based active gain. A commercially available broadband DMD is then utilized to excite the LG modes with a flexibly tunable topological charge of up to 100 order through the super-pixel wavefront shaping technique. The combination of the RFL and the DMD greatly broadens the operating wavelength region of the LG modes to be achieved, which facilitates the capacity scaling-up in the orbital angular momentum multiplexed optical communication application.

Effects of overtreatment with different attachment positions on maxillary anchorage enhancement with clear aligners: a finite element analysis study.

BACKGROUND: The effect of attachment positions on anchorage has not been fully explored. The aim of the present study is to analyze the effect of overtreatment with different anchorage positions on maxillary anchorage enhancement with clear aligners in extraction cases. METHODS: Models of the maxilla and maxillary dentition were constructed and imported into SOLIDWORKS software to create periodontal ligament (PDL), clear aligners, and attachments. Attachment positions on second premolars included: without attachment (WOA), buccal attachment (BA), and bucco-palatal attachment (BPA). Overtreatment degrees were divided into five groups (0°, 1°, 2°, 3°, 4°) and added on the second premolars. The calculation and analysis of the displacement trends and stress were performed using ANSYS software. RESULTS: Distal tipping and extrusion of the canines, and mesial tipping and intrusion of the posterior teeth occurred during retraction. A strong anchorage was achieved in cases of overtreatment of 2.8° with BA and 2.4° with BPA. Moreover, the BPA showed the best in achieving bodily control of the second premolars. When the overtreatment was performed, the canines and first molars also showed reduced tipping trends with second premolars attachments. And the stress on the PDL and the alveolar bone was significantly relieved and more evenly distributed in the BPA group. CONCLUSIONS: Overtreatment is an effective means for anchorage enhancement. However, the biomechanical effect of overtreatment differs across attachment positions. The BPA design performs at its best for stronger overtreatment effects with fewer adverse effects.

[Latest Findings on the Function of Immune Metabolism in Tumor Immunity].

Metabolic reprogramming, an important hallmark of cancer, helps cancer achieve rapid proliferation. Metabolic changes in tumors regulate multiple metabolic pathways of immune cells, thereby suppressing antitumor immunity. Recent studies have been focused on in-depth investigation into the changes in the metabolism of glucose, amino acids, and lipids. Researchers have also conducted in-depth exploration of the interactive metabolic regulation of tumor cells and immune cells. Targeting various metabolic mechanisms while combining available anti-tumor therapies and enhancing the anti-tumor effects of immunotherapy by satisfying the metabolic demands of immune cells has offered new perspectives for therapies targeting the immune metabolism of tumors and enhancing anti-tumor immune responses. Studies on novel immune checkpoint molecules and cellular immunotherapies are also ongoing. Herein, we reviewed the latest findings on the mechanisms of immune metabolism underlying tumor immunosuppression and their application in immunotherapy. We also suggested some ideas for the future development of the regulation of immune metabolism.

Large-capacity and long-distance distributed acoustic sensing based on an ultra-weak fiber Bragg grating array with an optimized pulsed optical power arrangement.

A large-capacity, long-distance distributed acoustic sensing (DAS) system without inline optical amplification was proposed and experimentally demonstrated using an ultra-weak fiber Bragg grating (UWFBG) array and coherent detection. The effect of the finite extinction ratio of an acousto-optic modulator and the Stokes signal of stimulated Brillouin scattering (SBS) in UWFBGs on the performance of DAS was simulated and revealed. A high extinction ratio and a balanced input pulsed optical power can improve the capacity and distance of the DAS. The dynamic acoustic signal can be well reconstructed for a serial array of 10828 near-identical UWFBG with a length of 54.14 km. An acoustic signal sensitivity of 189.54 pɛ/√Hz and a signal SNR of 40.01 dB with a spatial resolution of 5 m can be achieved at the far end.

20 watt-level single transverse mode narrow linewidth and tunable random fiber laser at 1.5 µm band.

High power 1.5 µm band fiber lasers are of great importance for many practical applications. Generally, the technical targets including high average output power, narrow linewidth, temporally suppressed intensity dynamics, high spectral purity, single transverse mode lasing, and excellent robustness are the major concerns when constructing a high-performance laser source. Here, we demonstrate the highest output power of a wavelength tunable 1.5 µm band random fiber laser based on the active fiber gain mechanism to the best of our knowledge. A master oscillator power-amplifier (MOPA) configuration is employed to greatly boost the output power to 20 watt-level with a single transverse mode lasing and the same linewidth as the seed, benefiting from the spectral broadening free feature when employing the random fiber laser as the seed. This work not only enriches the progress of random fiber laser, but also provides an attractive alternative in realizing high performance lasing light source at 1.5 µm band.

High-Resolution Optical Fiber Temperature Sensor Based on Draw Tower Grating Array.

Ocean temperature monitoring is of great significance to marine fishing, aquaculture, and marine operations. Traditional electric sensors lack the potential to multiplex several sensors, and may suffer from electromagnetic interference. Meanwhile, fiber Bragg grating-based sensors have the advantages of high sensitivity, possibility for large-scale multiplexing, and immunity to electromagnetic interference. In this paper, we propose a Fabry-Pérot (FP) interferometer based on the draw tower grating array and combine it with the phase measurement method for demonstration and testing. In the sensor system, two adjacent fiber Bragg gratings (FBGs) are used as mirrors and an optical fiber connects them, forming a sensor unit. The signal was detected through the compensation of the optical path difference via two-arm path differences in an unbalanced interferometer. The sensor is calibrated in the range of 36.00-36.50 °C, and back to 36.00 °C, in steps of 0.10 °C. A thermocouple (DW1222) is used as a reference. Experimental testing demonstrates that under the thermal loop, the temperature and phase can be approximated as a linear relationship, the Pearson square correlation coefficient is 0.9996, and the temperature sensitivity is -9846 rad/°C. To prove that our experimental device can achieve a higher temperature resolution, we measured the background noise of the system. The experimental results indicate that the order of magnitude of our system temperature resolution can reach 10-5 °C. Thus, we believe that the sensor system is promising for the application of ocean temperature detection, and owing to the ultraweak reflection characteristics of the FBG, this method provides the possibility for large-scale multiplexing of the system.

Long Short-Term Memory Neural Network with Transfer Learning and Ensemble Learning for Remaining Useful Life Prediction.

Prediction of remaining useful life (RUL) is greatly significant for improving the safety and reliability of manufacturing equipment. However, in real industry, it is difficult for RUL prediction models trained on a small sample of faults to obtain satisfactory accuracy. To overcome this drawback, this paper presents a long short-term memory (LSTM) neural network with transfer learning and ensemble learning and combines it with an unsupervised health indicator (HI) construction method for remaining-useful-life prediction. This study consists of the following parts: (1) utilizing the characteristics of deep belief networks and self-organizing map networks to translate raw sensor data to a synthetic HI that can effectively reflect system health; and (2) introducing transfer learning and ensemble learning to provide the required degradation mechanism for the RUL prediction model based on LSTM to improve the performance of the model. The performance of the proposed method is verified by two bearing datasets collected from experimental data, and the results show that the proposed method obtains better performance than comparable methods.

A High-Sensitivity Dual-Axis Accelerometer with Two FP Cavities Assembled on Single Optical Fiber.

In this paper, a dual-axis Fabry-Pérot (FP) accelerometer assembled on single optical fiber is proposed. The sensor is equipped with a special beam-splitting prism to split the light into two perpendicular directions (the X- and Y-axes); the prism surface coated with semi-permeable film and the reflective sheet on the corresponding Be-Cu vibration-sensitive spring form two sets of FP cavities of different sizes. When the Be-Cu spring with a proof mass (PM) is subjected to the vibration signal, the cavity length of the corresponding FP cavity is changed and the interference signal returns to the collimator through the original path of the prism. After bandpass filtering and demodulation, the two cavity lengths are obtained, and the acceleration measurement in dual-axis directions is completed. The resonant frequency of the proposed dual-axis fiber optic accelerometer is around 280 Hz. The results of the spectral measurements show 3.93 µm/g (g = 9.8 m/s2: gravity constant) and 4.19 µm/g for the applied acceleration along the X- and Y-axes, respectively, and the cross-axis sensitivity is below 5.1%. Within the angle range of 180°, the maximum error of measured acceleration is less than 3.77%. The proposed fiber optic dual-axis FP accelerometer has high sensitivity and strong immunity to electromagnetic interference. The size of the sensor mainly depends on the size of the prism, which is easy to reduce and mass produce. Moreover, this FP construction method has high flexibility and development potential.

Effectiveness of the attachment position in molar intrusion with clear aligners: a finite element study.

OBJECTIVE: To evaluate the biomechanical effects of different attachments' position for maxillary molar intrusion with clear aligner treatment by finite element analysis. METHODS: Cone-beam computed tomography images of a patient with supra-eruption of the maxillary second molars were selected to construct three-dimensional models of the maxilla, periodontal ligaments, dentition, and clear aligner. The models were divided into four groups depending on the attachment location on the first molar: (1) no attachment (NA), (2) buccal attachment (BA), (3) palatal attachment (PA), and (4) bucco-palatal attachment (BPA). After applying an intrusion of 0.2 mm on the second molar, displacements and stress distributions of the teeth, aligner, and periodontal ligament were analyzed with the finite element software. RESULTS: All groups displayed equivalent movement patterns of aligners. The NA and BA groups showed buccal tipping of the second molar, while the PA group showed palatal tipping. The BPA group had the highest intruding value and the lowest buccal/palatal tipping value. All groups showed mesial tipping of the second molar. Stress distribution in the periodontal ligament strongly correlated with the attachment position. The BPA group showed the best stress distribution. CONCLUSION: Combined BA and PA could effectively prevent buccal and palatal tipping and showed the best efficiency in intruding the second molar. The second molar showed an unavoidable tendency to tip mesially, regardless of the attachment position.

Iteration Bayesian Reweighed Algorithm for Optical Carrier-Based Microwave Interferometry Sensing.

This paper proposes a novel iteration Bayesian reweighed (IBR) algorithm to obtain accurate estimates of a measurement parameter that uses only a few noisy measurement data. The method is applied to optimize the frequency fluctuation in an optical carrier-based microwave interferometry (OCMI) system. The algorithm iteratively estimates the frequency of the S-parameter valley point by collecting training samples to rebalance the weights between prior samples, which reduces the impact of noise in the system. Simulation shows that the estimated result of this algorithm is closer to the true value than that of the maximum likelihood estimation (MLE) using the same amount of measured data. Under the influence of system noise, this algorithm optimizes the frequency fluctuation of the S-parameter and reduces the impact of individual measured data. In this study, we applied the algorithm in the strain sensing experiment and compared it with the MLE. When axial strain changes 240 µÎµ, the IBR algorithm yields a deviation of 36 µÎµ, which is a significant reduction from 138 µÎµ (using the MLE method). Moreover, the average error rate decreases from 25% to 3% (with the MLE method), suggesting that the linear fitting degree of the estimated results and accuracy of the system are improved. Moreover, the algorithm has a wide range of applicability, for it can handle different application models in the OCMI system and the systems with frequency fluctuation problems.

Multiple-Octave-Spanning Vibration Sensing Based on Simultaneous Vector Demodulation of 499 Fizeau Interference Signals from Identical Ultra-Weak Fiber Bragg Gratings Over 2.5 km.

Multi-point vibration sensing at the low frequency range of 0.5-100 Hz is of vital importance for applications such as seismic monitoring and underwater acoustic imaging. Location-resolved multi-point sensing using a single fiber and a single demodulation system can greatly reduce system deployment and maintenance costs. We propose and demonstrate the demodulation of a fiber-optic system consisting of 500 identical ultra-weak Fiber Bragg gratings (uwFBGs), capable of measuring the amplitude, frequency and phase of acoustic signals from 499 sensing fibers covering a total range of 2.5 km. For demonstration purposes, we arbitrarily chose six consecutive sensors and studied their performance in detail. Using a passive demodulation method, we interrogated the six sensors simultaneously, and achieved a high signal-to-noise ratio of 22.1 dB, excellent linearity, phase sensitivity of around 0.024 rad/Pa, and a dynamic range of about 38 dB. We demonstrated a frequency response flatness of <1.2 dB in the range of 0.5-100 Hz. Compared to the prior state-of-the-art demonstration using a similar method, we have increased the sensing range from 1 km to 2.5 km, and increased the frequency range from 0.4 octaves to 7.6 octaves, in addition to achieving sensing in the very challenging low-frequency range of 0.5-100 Hz.

Large-capacity multiplexing of near-identical weak fiber Bragg gratings using frequency-shifted interferometry.

We demonstrate interrogation of a large-capacity sensor array with nearly identical weak fiber Bragg gratings (FBGs) based on frequency-shifted interferometry (FSI). In contrast to time-division multiplexing, FSI uses continuous-wave light and therefore requires no pulse modulation or high-speed detection/acquisition. FSI utilizes a frequency shifter in the Sagnac interferometer to encode sensor location information into the relative phase between the clock-wise and counter-clockwise propagating lightwaves. Sixty-five weak FBGs with reflectivities in the range of -31 ~-34 dB and with near identical peak reflection wavelengths around 1555 nm at room temperature were interrogated simultaneously. Temperature sensing was conducted and the average measurement accuracy of the peak wavelengths was ± 3.9 pm, corresponding to a temperature resolution of ± 0.4 °C. Our theoretical analysis taking into account of detector noise, fiber loss, and sensor cross-talk noise shows that there exists an optimal reflectivity that maximizes multiplexing capacity. The multiplexing capacity can reach 3000 with the corresponding sensing range of 30 km, when the peak reflectivity of each grating is -40 dB, the sensor separation 10 m and the source power 14 mW. Experimental results and theoretical analysis reveal that FSI has distinct cost and speed advantages in multiplexing large-scale FBG networks.

Method of hybrid multiplexing for fiber-optic Fabry-Perot sensors utilizing frequency-shifted interferometry.

Experimental and theoretical research on hybrid multiplexing for fiber-optic Fabry-Perot (F-P) sensors based on frequency-shifted interferometry is presented. Four F-P sensors multiplexed in a hybrid configuration were experimentally investigated. The location of each multiplexed sensor was retrieved by performing the fast Fourier transform, and the reflection spectrum of each sensor was also obtained in spite of the spectral overlap, which was consistent with the results measured by an optical spectrum analyzer. With theoretical modeling, the maximum sensor number of a two-channel hybrid multiplexing system reaches 26 with crosstalk of less than -50 dB and a maximum frequency-domain signal-to-noise ratio (SNR) of ∼25 dB, when the source power is 2 mW and the sensor separation is optimal, i.e., 40 m. And the sensor number is almost twice that multiplexed by a serial system under the same conditions. An SNR improvement of 3.9 dB can be achieved by using a Hamming window in a noise-free system compared with a Hanning window. In addition, we applied the experimental multiplexing system to a strain sensing test. The cavity lengths and cavity-length shifts of the four F-P sensors were demodulated, which was consistent with the actual situation. It provides a new feasible method to multiplex F-P sensors at large scale.

Integrative multi-omics approaches to explore immune cell functions: Challenges and opportunities.

As modern biological sciences evolve from investigation of individual molecules and pathways to growing emphasis on global and systems-based processes, increasing efforts have focused on combining the study of genomics with that of the other omics technologies, including epigenomics, transcriptomics, quantitative proteomics, global analyses of post-translational modifications (PTMs) and metabolomics, to characterize specific biological or pathological processes. In addition, emerging genome-wide functional screening technologies further help researchers identify key regulators of immune functions. Derived from these multi-omics technologies, single cell sequencing analysis on multiple layers offers an overview of intra-tissue or intra-organ immune cell heterogeneity. In this review, we summarize advances in multi-omics tools to explore immune cell functions and applications of these multi-omics approaches in the analysis of clinical immune disorders, aiming to provide an outlook on the potential opportunities and challenges that these technologies pose in future investigation in the field of immunology.

Understanding endometriosis from an immunomicroenvironmental perspective.

ABSTRACT: Endometriosis, a heterogeneous, inflammatory, and estrogen-dependent gynecological disease defined by the presence and growth of endometrial tissues outside the lining of the uterus, affects approximately 5-10% of reproductive-age women, causing chronic pelvic pain and reduced fertility. Although the etiology of endometriosis is still elusive, emerging evidence supports the idea that immune dysregulation can promote the survival and growth of retrograde endometrial debris. Peritoneal macrophages and natural killer (NK) cells exhibit deficient cytotoxicity in the endometriotic microenvironment, leading to inefficient eradication of refluxed endometrial fragments. In addition, the imbalance of T-cell subtypes results in aberrant cytokine production and chronic inflammation, which contribute to endometriosis development. Although it remains uncertain whether immune dysregulation represents an initial cause or merely a secondary enhancer of endometriosis, therapies targeting altered immune pathways exhibit satisfactory effects in preventing disease onset and progression. Here, we summarize the phenotypic and functional alterations of immune cells in the endometriotic microenvironment, focusing on their interactions with microbiota and endocrine and nervous systems, and how these interactions contribute to the etiology and symptomology of endometriosis.

Anomalous transport of colloids in heterogeneous porous media: A multi-scale statistical theory.

HYPOTHESIS: Transport of suspended colloids in heterogeneous porous media is a multi-scale process that exhibits anomalous behavior and cannot be described by the Fickian dispersion theory. Although many studies have documented colloids' transport at different length scales, a theoretical basis that links pore- to core-scale observations remains lacking. It is hypothesized that a recently proposed pore-scale statistical kinetic theory is able to capture the results observed experimentally. EXPERIMENTS: We implement a multi-scale approach via conducting core-flooding experiments of colloidal particles in a sandstone sample, simulating particles flowing through a sub-volume of the rock's digital twin, and developing a core-scale statistical theory for particles' residence times via upscaling the pore-scale kinetic theory. Experimental and computational results for solute transport are used as benchmark. FINDINGS: Based on good agreement across the scales achieved in our investigation, we show that the macroscopically observed anomalous transport is particle-type dependent and stems from particles' microscopic dispersion and deposition in heterogeneous flow fields. In particular, we reveal that residence-time distributions (i.e., breakthrough curve) obey a closed-form function that encompasses particles' microscopic dynamics, which allows investigations of a whole transition from pre-asymptotic to asymptotic behavior. The physical insights attained could be useful for interpreting experimental data and designing colloidal tracers.

PinX1 gene transfection enhances the sensitivity of gastric carcinoma cell line to 5-fluorouracil.

BACKGROUND/AIMS: Since telomeres and telomerase play crucial roles in maintaining cell immortalization and cancer progression, they may be targets for anticancer treatment. PinX1 is a potent telomerase inhibitor, and a putative tumor suppressor. The use of PinX1 to treat cancers has not been reported yet. METHODOLOGY: In order to use PinX1 in gene therapy for gastric carcinoma, we transfected PinX1 gene into the gastric carcinoma line MKN28 using the eukaryotic expression vector pIRES2-EGFP. PinX1-expressing, drug-resistant clones were screened with G418 and used in the study. RESULTS: MKN28 cells transfected with PinX1 gene grew more slowly than the cells not transfected or transfected with void vectors (p<0.05). The IC50 value decreased markedly in cells transfected with PinX1 gene. PinX1 gene transfection enhanced the sensitivity of MKN28 cells to 5-fluorouracil (p<0.05). CONCLUSIONS: PinX1 may be used in gene therapy for gastric carcinoma.

Integrated Analysis of mRNA-seq and miRNA-seq to Identify c-MYC, YAP1 and miR-3960 as Major Players in the Anticancer Effects of Caffeic Acid Phenethyl Ester in Human Small Cell Lung Cancer Cell Line.

BACKGROUND: Caffeic Acid Phenethyl Ester (CAPE), an active extract of propolis, has recently been reported to have broad applications in various cancers. However, the effects of CAPE on Small Cell Lung Cancer (SCLC) are largely unknown. Therefore, the aim of this study was to determine the anti-proliferative effect of CAPE and explore the underlying molecular mechanisms in SCLC cells using high-throughput sequencing and bioinformatics analysis. METHODS: Small-cell lung cancer H446 cells were treated with CAPE, and cell proliferation and apoptosis were then assessed. Additionally, the regulation mediated by miR-3960 after CAPE treatment was explored and the altered signaling pathways were predicted in a bioinformatics analysis. RESULTS: CAPE significantly inhibited cell proliferation and induced apoptosis. CAPE decreased the expression of Yes-Associated Protein 1 (YAP1) and cellular myelocytomatosis oncogene (c-MYC) protein. Moreover, the upregulation of miR-3960 by CAPE contributed to CAPE-induced apoptosis. The knockdown of miR-3960 decreased the CAPE-induced apoptosis. CONCLUSION: We demonstrated the anti-cancer effect of CAPE in human SCLC cells and studied the mechanism by acquiring a comprehensive transcriptome profile of CAPE-treated cells.

Curcumin-Induced Global Profiling of Transcriptomes in Small Cell Lung Cancer Cells.

BACKGROUND: Curcumin, one of the promising candidates for supplementary therapy in cancer treatment, has been demonstrated by numerous preclinical and clinical evidence to be beneficial in treating various cancers. Apart from the critical role in a deluge of pathological processes, some mRNAs, in particular, microRNAs (miRNAs), are also involved in the anti-tumor activity. Therefore, our research focused on the possible effects of curcumin on small cell lung cancer (SCLC) cells and drew a comprehensive transcriptomes profile by high throughput sequencing to understand the molecular mechanism of curcumin as an anti-tumor agent. METHODS: First, we calculated the apoptosis rate of H446 cells (a human SCLC cell line) cultured with curcumin. The high output sequencing uncovered the altered expression profile of genes and miRNAs. KEGG analysis selected the potential signal pathway associated with the antiproliferative property of curcumin. Finally, miRNAs significantly changed, as well as the regulatory roles of those miRNAs in cell apoptosis were determined. RESULT: The apoptosis rate of H446 cells increased under the elevated concentration of curcumin treatment. And cell cycle-related genes downregulated in the curcumin-treated cells. Besides, miRNA-548ah-5p of a high level acted as a negative role in the anticarcinogenic activity of curcumin. CONCLUSION: Our findings not only enriched the understanding of anti-tumor activity initiated by curcumin through figuring out the downregulated cell cycle-related pathways but also shed light on its novel therapeutic application.

Phase I evaluation of the safety and pharmacokinetics of a single-dose intravenous injection of a murine monoclonal antibody against Hantaan virus in healthy volunteers.

Anti-Hantaan virus monoclonal antibody (AHM) is a murine monoclonal antibody against Hantaan virus being developed for the treatment of hemorrhagic fever with renal syndrome. The purpose of the present study was to describe the tolerance and pharmacokinetics of an intravenously administered single ascending dose of AHM in Chinese healthy volunteers. Four cohorts of 22 healthy subjects received AHM at 2.5 to 20 mg, and the results indicated that AHM was well tolerated. We established a highly sensitive, rapid, and accurate immunoassay for the kinetic analysis of AHM in serum. Serial blood samples were obtained after intravenous administration for up to 17 days. A one-compartment model was determined to best describe the disposition of AHM. The maximal level in serum and the area under the serum concentration-time curve were proportional to the doses. The mean clearance, the half-life, and the volume of distribution were constant, irrespective of the dose. AHM was slowly cleared and had a half-life of approximately 110 h. These data support the use of a treatment regimen in which AHM is given only once intravenously.