Bioinspired and Bioderived Aqueous Electrocatalysis.

The development of efficient and sustainable electrochemical systems able to provide clean-energy fuels and chemicals is one of the main current challenges of materials science and engineering. Over the last decades, significant advances have been made in the development of robust electrocatalysts for different reactions, with fundamental insights from both computational and experimental work. Some of the most promising systems in the literature are based on expensive and scarce platinum-group metals; however, natural enzymes show the highest per-site catalytic activities, while their active sites are based exclusively on earth-abundant metals. Additionally, natural biomass provides a valuable feedstock for producing advanced carbonaceous materials with porous hierarchical structures. Utilizing resources and design inspiration from nature can help create more sustainable and cost-effective strategies for manufacturing cost-effective, sustainable, and robust electrochemical materials and devices. This review spans from materials to device engineering; we initially discuss the design of carbon-based materials with bioinspired features (such as enzyme active sites), the utilization of biomass resources to construct tailored carbon materials, and their activity in aqueous electrocatalysis for water splitting, oxygen reduction, and CO2 reduction. We then delve in the applicability of bioinspired features in electrochemical devices, such as the engineering of bioinspired mass transport and electrode interfaces. Finally, we address remaining challenges, such as the stability of bioinspired active sites or the activity of metal-free carbon materials, and discuss new potential research directions that can open the gates to the implementation of bioinspired sustainable materials in electrochemical devices.

Anion Exchange Ionomers: Design Considerations and Recent Advances - An Electrochemical Perspective.

Alkaline-based electrochemical devices, such as anion exchange membrane (AEM) fuel cells and electrolyzers, are receiving increasing attention. However, while the catalysts and membrane are methodically studied, the ionomer is largely overlooked. In fact, most of the studies in alkaline electrolytes are conducted using the commercial proton exchange ionomer Nafion. The ionomer provides ionic conductivity; it is also essential for gas transport and water management, as well as for controlling the mechanical stability and the morphology of the catalyst layer. Moreover, the ionomer has distinct requirements that differ from those of anion-exchange membranes, such as a high gas permeability, and that depend on the specific electrode, such as water management. As a result, it is necessary to tailor the ionomer structure to the specific application in isolation and as part of the catalyst layer. In this review, an overview of the current state of the art for anion exchange ionomers is provided, summarizing their specific requirements and limitations in the context of AEM electrolyzers and fuel cells.

Poly(ionic liquid) Ionomers Help Prevent Active Site Aggregation, in Single-Site Oxygen Reduction Catalysts.

Anion exchange membrane fuel cells (AEMFCs) can produce clean electricity without the need for platinum-group metals at the cathode. To improve their durability and performance, most research investigations so far have focused on optimizing the catalyst and anion exchange membrane, while few studies have been dedicated to the effect of the ionomer. Herein, we address this gap by developing a poly(ionic liquid)-based ionomer and studying its effect on oxygen transport and oxygen reduction kinetics, in comparison to the commercial proton exchange and anion exchange ionomers Nafion and Fumion. Our study shows that the choice of ionomer has a dramatic effect on the morphology of the catalyst layer, in particular on iron aggregation. We also observed that the quality of the catalyst layer and the degree of iron aggregation can be correlated to the rheological properties of the catalyst ink. Moreover, this work highlights the impact of the ionomer on the resistance to oxygen transport and reports improved oxygen diffusion compared to Nafion, for poly(ionic liquid)s with fluorinated anions. Finally, the performance of the catalyst-ionomer layer for oxygen reduction was tested with a rotating disc electrode (RDE) and a gas diffusion electrode (GDE). We observed dramatic differences between the two configurations, which we attribute to the different morphologies of the catalyst layer. In summary, our study highlights the dramatic and overlooked effect of the ionomer and the limitations of the RDE in predicting fuel cell performance.

FeNC Oxygen Reduction Electrocatalyst with High Utilization Penta-Coordinated Sites.

Atomic Fe in N-doped carbon (FeNC) electrocatalysts for oxygen (O2 ) reduction at the cathode of proton exchange membrane fuel cells are the most promising alternative to platinum-group-metal catalysts. Despite recent progress on atomic FeNC O2  reduction, their controlled synthesis and stability for practical applications remain challenging. A two-step synthesis approach has recently led to significant advances in terms of Fe-loading and mass activity; however, the Fe utilization remains low owing to the difficulty of building scaffolds with sufficient porosity that electrochemically exposes the active sites. Herein, this issue is addressed by coordinating Fe in a highly porous nitrogen-doped carbon support (≈3295 m2  g-1 ), prepared by pyrolysis of inexpensive 2,4,6-triaminopyrimidine and a Mg2+ salt active site template and porogen. Upon Fe coordination, a high electrochemical active site density of 2.54 × 1019  sites gFeNC -1  and a record 52% FeNx electrochemical utilization based on in situ nitrite stripping are achieved. The Fe single atoms are characterized pre- and post-electrochemical accelerated stress testing by aberration-corrected high-angle annular dark field scanning transmission electron microscopy, showing no Fe clustering. Moreover, ex situ X-ray absorption spectroscopy and low-temperature Mössbauer spectroscopy suggest the presence of penta-coordinated Fe sites, which are further studied by density functional theory calculations.

Role of Ni in PtNi Bimetallic Electrocatalysts for Hydrogen and Value-Added Chemicals Coproduction via Glycerol Electrooxidation.

Pt-based bimetallic electrocatalysts are promising candidates to convert surplus glycerol from the biodiesel industry to value-added chemicals and coproduce hydrogen. It is expected that the nature and content of the elements in the bimetallic catalyst can not only affect the reaction kinetics but also influence the product selectivity, providing a way to increase the yield of the desired products. Hence, in this work, we investigate the electrochemical oxidation of glycerol on a series of PtNi nanoparticles with increasing Ni content using a combination of physicochemical structural analysis, electrochemical measurements, operando spectroscopic techniques, and advanced product characterizations. With a moderate Ni content and a homogenously alloyed bimetallic Pt-Ni structure, the PtNi2 catalyst displayed the highest reaction activity among all materials studied in this work. In situ FTIR data show that PtNi2 can activate the glycerol molecule at a more negative potential (0.4 V RHE) than the other PtNi catalysts. In addition, its surface can effectively catalyze the complete C-C bond cleavage, resulting in lower CO poisoning and higher stability. Operando X-ray absorption spectroscopy and UV-vis spectroscopy suggest that glycerol adsorbs strongly onto surface Ni(OH) x sites, preventing their oxidation and activation of oxygen or hydroxyl from water. As such, we propose that the role of Ni in PtNi toward glycerol oxidation is to tailor the electronic structure of the pure Pt sites rather than a bifunctional mechanism. Our experiments provide guidance for the development of bimetallic catalysts toward highly efficient, selective, and stable glycerol oxidation reactions.