Measurement of the ν_{e}-Nucleus Charged-Current Double-Differential Cross Section at ⟨E_{ν}⟩=2.4 GeV Using NOvA.

The inclusive electron neutrino charged-current cross section is measured in the NOvA near detector using 8.02×10^{20} protons-on-target in the NuMI beam. The sample of GeV electron neutrino interactions is the largest analyzed to date and is limited by ≃17% systematic rather than the ≃7.4% statistical uncertainties. The double-differential cross section in final-state electron energy and angle is presented for the first time, together with the single-differential dependence on Q^{2} (squared four-momentum transfer) and energy, in the range 1 GeV≤E_{ν}<6 GeV. Detailed comparisons are made to the predictions of the GENIE, GiBUU, NEUT, and NuWro neutrino event generators. The data do not strongly favor a model over the others consistently across all three cross sections measured, though some models have especially good or poor agreement in the single differential cross section vs Q^{2}.

Search for Active-Sterile Antineutrino Mixing Using Neutral-Current Interactions with the NOvA Experiment.

This Letter reports results from the first long-baseline search for sterile antineutrinos mixing in an accelerator-based antineutrino-dominated beam. The rate of neutral-current interactions in the two NOvA detectors, at distances of 1 and 810 km from the beam source, is analyzed using an exposure of 12.51×10^{20} protons-on-target from the NuMI beam at Fermilab running in antineutrino mode. A total of 121 of neutral-current candidates are observed at the far detector, compared to a prediction of 122±11(stat.)±15(syst.) assuming mixing only between three active flavors. No evidence for ν[over ¯]_{µ}→ν[over ¯]_{s} oscillation is observed. Interpreting this result within a 3+1 model, constraints are placed on the mixing angles θ_{24}<25° and θ_{34}<32° at the 90% C.L. for 0.05 eV^{2}≤Δm_{41}^{2}≤0.5 eV^{2}, the range of mass splittings that produces no significant oscillations at the near detector. These are the first 3+1 confidence limits set using long-baseline accelerator antineutrinos.

Directed, Elliptic, and Higher Order Flow Harmonics of Protons, Deuterons, and Tritons in Au+Au Collisions at sqrt[s_{NN}]=2.4 GeV.

Flow coefficients v_{n} of the orders n=1-6 are measured with the High-Acceptance DiElectron Spectrometer (HADES) at GSI for protons, deuterons, and tritons as a function of centrality, transverse momentum, and rapidity in Au+Au collisions at sqrt[s_{NN}]=2.4 GeV. Combining the information from the flow coefficients of all orders allows us to construct for the first time, at collision energies of a few GeV, a multidifferential picture of the angular emission pattern of these particles. It reflects the complicated interplay between the effect of the central fireball pressure on the emission of particles and their subsequent interaction with spectator matter. The high precision information on higher order flow coefficients is a major step forward in constraining the equation of state of dense baryonic matter.

Relation between sensory analysis and rheology of body lotions.

OBJECTIVE: Evaluation of sensory attributes of cosmetic products is traditionally based on sensory panels. However, in some cases, a suitable candidate method that can reduce time and costs is the use of instrumental analysis that can detect relatively very small changes of entry ingredients. Such approach has been already applied for emollients, salt content, stabilizers, etc. The aim of this contribution is to apply the relations between sensory analysis and rheology to a series of body lotions differing in the contents of emulsifiers and viscosity regulators. METHODS: Sensory and rheological analyses are related. Rheological analysis can represent a good alternative to basic orientation in chosen customer's feelings. A rotational rheometer is the only instrumental device required for the measurements. RESULTS: An empirical rheological model was proposed by means of which the selected sensory attributes were evaluated using the numerical values of adjustable model parameters. This approach exhibited a very good agreement with the results obtained by the sensory panel. CONCLUSION: It was shown that a description of chosen sensory attributes can be responsibly carried out by rheological measurements, that is through the attained numerical values of the parameters appearing in a proposed empirical model characterizing shear viscosity of body lotions.

Does a minimally invasive approach increase the incidence of patient-prosthesis mismatch in aortic valve replacement?

BACKGROUND AND AIM OF THE STUDY: The impact of a minimally invasive approach on patient-prosthesis mismatch (PPM) in patients undergoing aortic valve replacement (AVR) remains unknown. The study aim was to identify the impact of a minimally invasive approach for AVR on the incidence of PPM. METHODS: The results of a single-center experience in 506 patients who underwent isolated AVR through a minimally invasive or conventional sternotomy were analyzed. Postoperative PPM was defined as an effective orifice area index < 0.85 cm2/m2, and was correlated with surgical approach, mortality and cardiac events after surgery. RESULTS: Overall, postoperative PPM was present in 26.0% of the patients. The ratio of PPM was 24.1% in minimal access patients and 27.7% in conventional AVR patients (p = 0.35). Hospital mortality was similar in both groups (3.8% versus 3.4%, p = 0.62). The body mass index (BMI) was higher in patients with PPM (28.5 +/- 4.4 versus 25.3 +/- 3.6 kg/m2; p = 0.0001), but obesity was significantly associated with PPM (36.3% versus 9.4%; p = 0.0001). The PPM group included more patients with a left ventricular ejection fraction (LVEF) < 0.50 (12.8% versus 5.3%; p = 0.004). The independent risk factors for PPM were increased BMI (p = 0.0001), LVEF < 0.50 (p = 0.007) and preoperative aortic stenosis (p = 0.029). A LVEF < 0.50 increased the risk for PPM by 3.77-fold (95% CI: 1.4-9.9), while a high BMI increased the risk by 1.42-fold (95% CI: 1.3-1.5). Preoperative aortic insufficiency was associated with PPM, but did not significantly increase the risk. CONCLUSION: A minimally invasive approach for AVR did not lead to an increased incidence of PPM and associated adverse events following surgery.

Essential information on surgical heart valve characteristics for optimal valve prosthesis selection: expert consensus document from the European Association for Cardio-Thoracic Surgery (EACTS)-The Society of Thoracic Surgeons (STS)-American Association for Thoracic Surgery (AATS) Valve Labelling Task Force.

Comprehensive information on the characteristics of surgical heart valves (SHVs) is essential for optimal valve selection. Such information is also important in assessing SHV function after valve replacement. Despite the existing regulatory framework for SHV sizing and labelling, this information is challenging to obtain in a uniform manner for various SHVs. To ensure that clinicians are adequately informed, the European Association for Cardio-Thoracic Surgery (EACTS), The Society of Thoracic Surgeons (STS) and American Association for Thoracic Surgery (AATS) set up a Task Force comprised of cardiac surgeons, cardiologists, engineers, regulatory bodies, representatives of the International Organization for Standardization and major valve manufacturers. Previously, the EACTS-STS-AATS Valve Labelling Task Force identified the most important problems around SHV sizing and labelling. This Expert Consensus Document formulates recommendations for providing SHV physical dimensions, intended implant position and haemodynamic performance in a transparent, uniform manner. Furthermore, the Task Force advocates for the introduction and use of a standardized chart to assess the probability of prosthesis-patient mismatch and calls valve manufacturers to provide essential information required for SHV choice on standardized Valve Charts, uniformly for all SHV models.

Essential information on surgical heart valve characteristics for optimal valve prosthesis selection: Expert consensus document from the European Association for Cardio-Thoracic Surgery (EACTS)-The Society of Thoracic Surgeons (STS)-American Association for Thoracic Surgery (AATS) Valve Labelling Task Force.

Comprehensive information on the characteristics of surgical heart valves (SHVs) is essential for optimal valve selection. Such information is also important in assessing SHV function after valve replacement. Despite the existing regulatory framework for SHV sizing and labelling, this information is challenging to obtain in a uniform manner for various SHVs. To ensure that clinicians are adequately informed, the European Association for Cardio-Thoracic Surgery (EACTS), The Society of Thoracic Surgeons (STS) and American Association for Thoracic Surgery (AATS) set up a Task Force comprised of cardiac surgeons, cardiologists, engineers, regulatory bodies, representatives of the International Organization for Standardization and major valve manufacturers. Previously, the EACTS-STS-AATS Valve Labelling Task Force identified the most important problems around SHV sizing and labelling. This Expert Consensus Document formulates recommendations for providing SHV physical dimensions, intended implant position and hemodynamic performance in a transparent, uniform manner. Furthermore, the Task Force advocates for the introduction and use of a standardized chart to assess the probability of prosthesis-patient mismatch and calls valve manufacturers to provide essential information required for SHV choice on standardized Valve Charts, uniformly for all SHV models.

Essential Information on Surgical Heart Valve Characteristics for Optimal Valve Prosthesis Selection: Expert Consensus Document From the European Association for Cardio-Thoracic Surgery (EACTS)-The Society of Thoracic Surgeons (STS)-American Association for Thoracic Surgery (AATS) Valve Labelling Task Force.

Comprehensive information on the characteristics of surgical heart valves (SHVs) is essential for optimal valve selection. Such information is also important in assessing SHV function after valve replacement. Despite the existing regulatory framework for SHV sizing and labelling, this information is challenging to obtain in a uniform manner for various SHVs. To ensure that clinicians are adequately informed, the European Association for Cardio-Thoracic Surgery (EACTS), The Society of Thoracic Surgeons (STS) and American Association for Thoracic Surgery (AATS) set up a Task Force comprised of cardiac surgeons, cardiologists, engineers, regulatory bodies, representatives of the International Organization for Standardization and major valve manufacturers. Previously, the EACTS-STS-AATS Valve Labelling Task Force identified the most important problems around SHV sizing and labelling. This Expert Consensus Document formulates recommendations for providing SHV physical dimensions, intended implant position and hemodynamic performance in a transparent, uniform manner. Furthermore, the Task Force advocates for the introduction and use of a standardized chart to assess the probability of prosthesis-patient mismatch and calls valve manufacturers to provide essential information required for SHV choice on standardized Valve Charts, uniformly for all SHV models.

Evaluating lubricant performance to reduce COVID-19 PPE-related skin injury.

BACKGROUND: Healthcare workers around the world are experiencing skin injury due to the extended use of personal protective equipment (PPE) during the COVID-19 pandemic. These injuries are the result of high shear stresses acting on the skin, caused by friction with the PPE. This study aims to provide a practical lubricating solution for frontline medical staff working a 4+ hours shift wearing PPE. METHODS: A literature review into skin friction and skin lubrication was conducted to identify products and substances that can reduce friction. We evaluated the lubricating performance of commercially available products in vivo using a custom-built tribometer. FINDINGS: Most lubricants provide a strong initial friction reduction, but only few products provide lubrication that lasts for four hours. The response of skin to friction is a complex interplay between the lubricating properties and durability of the film deposited on the surface and the response of skin to the lubricating substance, which include epidermal absorption, occlusion, and water retention. INTERPRETATION: Talcum powder, a petrolatum-lanolin mixture, and a coconut oil-cocoa butter-beeswax mixture showed excellent long-lasting low friction. Moisturising the skin results in excessive friction, and the use of products that are aimed at 'moisturising without leaving a non-greasy feel' should be prevented. Most investigated dressings also demonstrate excellent performance.

Characteristics of Surgical Prosthetic Heart Valves and Problems Around Labelling: A Document From the European Association for Cardio-Thoracic Surgery (EACTS)-The Society of Thoracic Surgeons (STS)-American Association for Thoracic Surgery (AATS) Valve Labelling Task Force.

Intraoperative surgical prosthetic heart valve (SHV) choice is a key determinant of successful surgery and positive postoperative outcomes. Currently, many controversies exist around the sizing and labelling of SHVs rendering the comparison of different valves difficult. To explore solutions, an expert Valve Labelling Task Force was jointly initiated by the European Association for Cardio-Thoracic Surgery (EACTS), The Society of Thoracic Surgeons (STS) and the American Association for Thoracic Surgery (AATS). The EACTS-STS-AATS Valve Labelling Task Force, comprising cardiac surgeons, cardiologists, engineers, regulators and representatives from the International Organization for Standardization (ISO) and major valve manufacturers, held its first in-person meeting in February 2018 in Paris, France. This article was derived from the meeting's discussions. The Task Force identified the following areas for improvement and clarification: reporting of physical dimensions and characteristics of SHVs determining and labelling of SHV size, in vivo and in vitro testing and reporting of SHV hemodynamic performance and thrombogenicity. Furthermore, a thorough understanding of the regulatory background and the role of the applicable ISO standards, together with close cooperation between all stakeholders (including regulatory and standard-setting bodies), is necessary to improve the current situation. Cardiac surgeons should be provided with appropriate information to allow for optimal SHV choice. This first article from the EACTS-STS-AATS Valve Labelling Task Force summarizes the background of SHV sizing and labelling and identifies the most important elements where further standardization is necessary.

Characteristics of surgical prosthetic heart valves and problems around labeling: A document from the European Association for Cardio-Thoracic Surgery (EACTS)-The Society of Thoracic Surgeons (STS)-American Association for Thoracic Surgery (AATS) Valve Labelling Task Force.

Intraoperative surgical prosthetic heart valve (SHV) choice is a key determinant of successful surgery and positive postoperative outcomes. Currently, many controversies exist around the sizing and labeling of SHVs rendering the comparison of different valves difficult. To explore solutions, an expert Valve Labelling Task Force was jointly initiated by the European Association for Cardio-Thoracic Surgery (EACTS), The Society of Thoracic Surgeons (STS) and the American Association for Thoracic Surgery (AATS). The EACTS-STS-AATS Valve Labelling Task Force, comprising cardiac surgeons, cardiologists, engineers, regulators and representatives from the International Organization for Standardization (ISO), and major valve manufacturers, held its first in-person meeting in February 2018 in Paris, France. This article was derived from the meeting's discussions. The Task Force identified the following areas for improvement and clarification: reporting of physical dimensions and characteristics of SHVs determining and labeling of SHV size, in vivo and in vitro testing, and reporting of SHV hemodynamic performance and thrombogenicity. Furthermore, a thorough understanding of the regulatory background and the role of the applicable ISO standards, together with close cooperation between all stakeholders (including regulatory and standard- setting bodies), is necessary to improve the current situation. Cardiac surgeons should be provided with appropriate information to allow for optimal SHV choice. This first article from the EACTS-STS-AATS Valve Labelling Task Force summarizes the background of SHV sizing and labeling and identifies the most important elements where further standardization is necessary.

Characteristics of surgical prosthetic heart valves and problems around labelling: a document from the European Association for Cardio-Thoracic Surgery (EACTS)-The Society of Thoracic Surgeons (STS)-American Association for Thoracic Surgery (AATS) Valve Labelling Task Force.

Intraoperative surgical prosthetic heart valve (SHV) choice is a key determinant of successful surgery and positive postoperative outcomes. Currently, many controversies exist around the sizing and labelling of SHVs rendering the comparison of different valves difficult. To explore solutions, an expert Valve Labelling Task Force was jointly initiated by the European Association for Cardio-Thoracic Surgery (EACTS), The Society of Thoracic Surgeons (STS) and the American Association for Thoracic Surgery (AATS). The EACTS-STS-AATS Valve Labelling Task Force, comprising cardiac surgeons, cardiologists, engineers, regulators and representatives from the International Organization for Standardization (ISO) and major valve manufacturers, held its first in-person meeting in February 2018 in Paris, France. This article was derived from the meeting's discussions. The Task Force identified the following areas for improvement and clarification: reporting of physical dimensions and characteristics of SHVs determining and labelling of SHV size, in vivo and in vitro testing and reporting of SHV haemodynamic performance and thrombogenicity. Furthermore, a thorough understanding of the regulatory background and the role of the applicable ISO standards, together with close cooperation between all stakeholders (including regulatory and standard-setting bodies), is necessary to improve the current situation. Cardiac surgeons should be provided with appropriate information to allow for optimal SHV choice. This first article from the EACTS-STS-AATS Valve Labelling Task Force summarizes the background of SHV sizing and labelling and identifies the most important elements where further standardization is necessary.

Endoscopic mitral and tricuspid valve surgery after previous cardiac surgery.

BACKGROUND: The purpose of this study was to evaluate the feasibility and effectiveness of a right video-assisted approach for atrioventricular valve disease after previous cardiac surgery. METHODS AND RESULTS: Between December 1st 1997 and May 1st 2006, 80 adults (mean age 65+/-12 years; 56% female) underwent reoperative surgery using a video-assisted approach without rib spreading. Previous cardiac operations included mitral valve (39%), CABG (29%), congenital (10%), and other (23%). For 25% of patients, this was at least their third cardiac operation. Mean time to redo surgery was 15+/-12 years. Femoral vessel cannulation and endoaortic clamping were routinely used. Mean preoperative Euroscore was 9.0+/-2.7 (5 to 20) and predicted mortality was 16.0+/-14.2% (4 to 86). Median preoperative NYHA class was II and mean follow-up was 25+/-22 months. Lung adhesions necessitated sternotomy in 4 cases and cannulation problems in another patient. Total operative mortality was 3.8% (n=3), O/E for mortality being 0.24. Procedures were mitral valve repair (45%; n=36), replacement (50%; n=40) and tricuspid valve replacement (5%; n=4). Additional procedures were performed in 44% (n=35). Mean aortic crossclamp and procedure time were 92+/-37 and 267+/-64 minutes. Mean postoperative blood loss was 815+/-1083 mL. Postoperative morbidity included 2 strokes (2.5%). Mean hospital stay was 10.7+/-6.7 days. Survival at 1 and 4 years was 93.6+/-2.8% and 85.6+/-6.4%. There was 1 late reoperation at 5 years. Median NYHA class at follow-up was II. When comparing, all but 1 patient (98.8%) preferred their minimally invasive approach when considering perioperative pain, postoperative rehabilitation, and final esthetic result. CONCLUSIONS: Video-assisted minimal access correction of atrioventricular valve disease after previous cardiac surgery is not only feasible but had lower than predicted mortality and strong patient satisfaction. It should therefore be used more frequently in today's practice.

Physical and chemical properties of sputter-deposited TaC(x)N(y) films.

The structural, electronic, optical, and mechanical properties of stoichiometric TaC(x)N(y = 1-x) were simulated using an ab initio calculation based on density functional theory (DFT) within the generalized gradient approximation. The calculations revealed the theoretical lattice parameter, density of states, refractive index, and elastic constants as a function of carbon and nitrogen content. TaC(x)N(y) films were subsequently produced on Si wafers using unbalanced magnetron sputtering. The structural, optical, and mechanical properties were measured using x-ray diffraction/transmission electron microscopy, vacuum ultraviolet spectroscopic ellipsometry, and nanoindentation, respectively. The computational and experimental properties were compared. The lattice parameter, the energy of the 2p bands in the density of states, and the energy of the interband transitions were found to decrease with increasing C content. No significant changes in the elastic constants were observed as a result of substituting N atoms with C atoms. The hardness and the elastic modulus were in the 40 and 380 GPa range, respectively. The experimental Young's modulus was much smaller than the computational one and this discrepancy was attributed to the nanocrystalline nature of the films. Also, the elastic constants were found to decrease dramatically for over-stoichiometric films.

Mitral valve surgery can now routinely be performed endoscopically.

BACKGROUND: There is an increasing interest in minimally invasive cardiac surgery. METHODS AND RESULTS: Since February 1, 1997 till April 1, 2002, 306 patients underwent endoscopic mitral valve surgery (226 repair, MVP; 80 replacement, MVR). Predominant valve pathology was degenerative in MVP (83.6%) and rheumatic in MVR (65%). Mean age was 61.5+/-12.9 years. Median preoperative functional class (MVP+MVR) and mitral regurgitation (MVP) were II and 4+. Statistical analysis included Kaplan-Meier and Cox regression methods. Mean follow-up was 19.6+/-17.3 months and complete. The procedure was successfully performed in all but 6 patients. Hospital mortality included 3 patients (1%) and was technology related in one. Postoperative morbidity included aggressive re-exploration (8.5%), new onset atrial fibrillation (17.0%), and pacemaker implantation (2.3%). There were 1 early and 10 late reoperations, 5 of which were because of endocarditis. Freedom from mitral valve reoperation at 4 years was 91+/-3.5%. No risk factors for reoperation could be detected. Echocardiographic follow-up showed a median degree of mitral regurgitation (MVP) of 0 and a small paravalvular leak in four patients (MVR). Ninety-four percent of the patients reported no or mild postoperative pain and 99.3% felt they had an esthetically pleasing scar. Ninety-three percent would choose the same procedure again and 46.1% were back at work within 4 weeks. CONCLUSIONS: Endoscopic mitral valve surgery can be performed safely but definitely requires a learning curve. Good results and a high patient satisfaction are guaranteed. It is now our exclusive approach for isolated atrioventricular valve disease.

Sensitivity of PPI analysis to differences in noise reduction strategies.

BACKGROUND: In some fields of fMRI data analysis, using correct methods for dealing with noise is crucial for achieving meaningful results. This paper provides a quantitative assessment of the effects of different preprocessing and noise filtering strategies on psychophysiological interactions (PPI) methods for analyzing fMRI data where noise management has not yet been established. METHODS: Both real and simulated fMRI data were used to assess these effects. Four regions of interest (ROIs) were chosen for the PPI analysis on the basis of their engagement during two tasks. PPI analysis was performed for 32 different preprocessing and analysis settings, which included data filtering with RETROICOR or no such filtering; different filtering of the ROI "seed" signal with a nuisance data-driven time series; and the involvement of these data-driven time series in the subsequent PPI GLM analysis. The extent of the statistically significant results was quantified at the group level using simple descriptive statistics. Simulated data were generated to assess statistical improvement of different filtering strategies. RESULTS: We observed that different approaches for dealing with noise in PPI analysis yield differing results in real data. In simulated data, we found RETROICOR, seed signal filtering and the addition of data-driven covariates to the PPI design matrix significantly improves results. CONCLUSIONS: We recommend the use of RETROICOR, and data-driven filtering of the whole data, or alternatively, seed signal filtering with data-driven signals and the addition of data-driven covariates to the PPI design matrix.