Isotopic Analyses Fingerprint Sources of Polycyclic Aromatic Compound-Bearing Dust in Athabasca Oil Sands Region Snowpack.

Fugitive dust associated with surface mining activities is one of the principal vectors for transport of airborne contaminants in Canada's Athabasca oil sands region (AOSR). Effective environmental management requires quantitative identification of the sources of this dust. Using natural abundance radiocarbon (Δ14C) and dual (δ13C, δ2H) compound-specific isotope analysis (CSIA), this study investigated the sources of dust and particulate-bound polycyclic aromatic compounds (PACs) deposited in AOSR lake snowpack. Lower Δ14C values, higher particulate and PAC loadings, and lower δ13C values for phenanthrene and C1-alkylated phenanthrenes/anthracenes (C1-Phen) at sites closer to the mining operations indicated unprocessed oil sand and/or petroleum coke (petcoke-a byproduct of bitumen upgrading) as major sources of anthropogenic fugitive dust. However, a Bayesian isotopic mixing model that incorporated both δ13C and δ2H could discriminate petcoke from oil sand, and determined that petcoke comprised between 44 and 95% (95% credibility intervals) of a C1-Phen isomer at lakes <25 km from the heart of the mining operations, making it by far the most abundant source. This study is the first to demonstrate the potential of CSIA to provide accurate PAC source apportionment in snowpack and reveals that petcoke rather than oil sand is the main source of mining-related particulate PACs deposited directly to AOSR lakes.

Distinguishing Natural from Anthropogenic Sources of Acid Extractable Organics in Groundwater near Oil Sands Tailings Ponds.

Distinguishing between naphthenic acids (NAs) associated with oil sands process-affected water (OSPW) and those found naturally in groundwaters in contact with the bituminous McMurray Formation poses a considerable analytical challenge to environmental research in Canada's oil sands region. Previous work addressing this problem combined high-resolution Orbitrap mass spectrometry with carbon isotope values generated by online pyrolysis (δ13Cpyr) to characterize and quantify the acid extractable organics (AEOs) fraction containing NAs in the subsurface near an oil sands tailings pond. Here, we build upon this work through further development and application of these techniques at two different study sites near two different tailings ponds, in conjunction with the use of an additional isotopic tool-sulfur isotope analysis (δ34S) of AEOs. The combined use of both δ13Cpyr and δ34S allowed for discrimination of AEOs into the three end-members relevant to ascertaining the NA environmental footprint within the region: (1) OSPW; (2) McMurray Formation groundwater (i.e., naturally occurring bitumen), and; (3) naturally occurring non-bitumen. A Bayesian isotopic mixing model was used to determine the relative proportions of these three sources in groundwater at both study sites. Although background levels of OSPW-derived AEOs were generally low, one sample containing 49-99% (95% credibility interval) OSPW-derived AEOs was detected within an inferred preferential flow-path, highlighting the potential for this technique to track tailings pond seepage.

Characterization and quantification of mining-related "naphthenic acids" in groundwater near a major oil sands tailings pond.

The high levels of acid extractable organics (AEOs) containing naphthenic acids (NAs) found in oil sands process-affected waters (OSPW) are a growing concern in monitoring studies of aquatic ecosystems in the Athabasca oil sands region. The complexity of these compounds has substantially hindered their accurate analysis and quantification. Using a recently developed technique which determines the intramolecular carbon isotope signature of AEOs generated by online pyrolysis (δ(13)Cpyr), natural abundance radiocarbon, and high resolution Orbitrap mass spectrometry analyses, we evaluated the sources of AEOs along a groundwater flow path from a major oil sands tailings pond to the Athabasca River. OSPW was characterized by a δ(13)Cpyr value of approximately -21‰ and relatively high proportions of O2 and O2S species classes. In contrast, AEO samples located furthest down-gradient from the tailings pond and from the Athabasca River were characterized by a δ(13)Cpyr value of around -29‰, a greater proportion of highly oxygenated and N-containing compound classes, and a significant component of nonfossil and, hence, non-bitumen-derived carbon. The groundwater concentrations of mining-related AEOs determined using a two end-member isotopic mass balance were between 1.6 and 9.3 mg/L lower than total AEO concentrations, implying that a less discriminating approach to quantification would have overestimated subsurface levels of OSPW. This research highlights the need for accurate characterization of "naphthenic acids" in order to quantify potential seepage from tailings ponds.

Evaluating in situ biodegradation of 13C-labelled naphthenic acids in groundwater near oil sands tailings ponds.

Potential seepage of naphthenic acids (NAs) from tailings ponds into surface water and groundwater is one of the main environmental concerns associated with the Canadian Athabasca oil sands mining operations. Here we report the application of 13C-labelled NA surrogate compounds to evaluate intrinsic biodegradation along groundwater flow-paths originating from oil sands tailings ponds at two different sites: a glacio-fluvial aquifer (Site 1) and a low-lying wetland (Site 2). Microcosms containing the carboxyl group labelled (99%) NA surrogates (cyclohexanecarboxylic acid, CHCA; 1,2-cyclohexanedicarboxylic acid, CHDCA; 1-adamantanecarboxylic acid, ACA) were lowered into monitoring wells for several months to allow sufficient time for substrate degradation and formation of a biofilm in conditions characteristic of the local aquifer. Phospholipid fatty acids (PLFAs), biomarkers for the active microbial population, were extracted from the biofilms for stable carbon isotope (δ13C) analysis. At Site 1, highly 13C-enriched δ13C values (up to ~+7100‰) confirmed the in situ microbial breakdown of CHCA and CHDCA. At Site 2, δ13C-PLFA values from -60.6 to -24.5‰ indicated uptake of a 13C-depleted substrate such as biogenic methane and not 13C-labelled ACA. Determination of the microbial community using 16s RNA sequencing confirmed the presence of methane-oxidizing bacteria in the subsurface at Site 2. The in situ biodegradation of NAs at Site 1 demonstrates that the indigenous microbial population in the shallow subsurface near tailings ponds can readily break down some of these compounds prior to surface water discharge. The lack of evidence for microbial uptake of 13C-labelled ACA at Site 2 demonstrates that other NAs, in particular tricyclic diamondoid acids, may persist in the environment following seepage from tailings ponds or natural sources.

Lake-sediment record of PAH, mercury, and fly-ash particle deposition near coal-fired power plants in Central Alberta, Canada.

We report a historical record of atmospheric deposition in dated sediment cores from Hasse Lake, ideally located near both currently and previously operational coal-fired power plants in Central Alberta, Canada. Accumulation rates of spheroidal carbonaceous particles (SCPs), an unambiguous marker of high-temperature fossil-fuel combustion, in the early part of the sediment record (pre-1955) compared well with historical emissions from one of North America's earliest coal-fired power plants (Rossdale) located ∼43 km to the east in the city of Edmonton. Accumulation rates in the latter part of the record (post-1955) suggested inputs from the Wabamun region's plants situated ∼17-25 km to the west. Increasing accumulation rates of SCPs, polycyclic aromatic hydrocarbons (PAHs) and Hg coincided with the previously documented period of peak pollution in the Wabamun region during the late 1960s to early 1970s, although Hg deposition trends were also similar to those found in western North American lakes not directly affected by point sources. A noticeable reduction in contaminant inputs during the 1970s is attributed in part to technological improvements and stricter emission controls. The over one hundred-year historical record of coal-fired power plant emissions documented in Hasse Lake sediments has provided insight into the impact that both environmental regulations and changes in electricity output have had over time. This information is crucial to assessing the current and future role of coal in the world's energy supply.