Enhanced Hydroxyl Adsorption in Ultrathin NiO/Cr2 O3 In-Plane Heterostructures for Efficient Alkaline Methanol Oxidation Reaction.

The exploration of advanced nickel-based electrocatalysts for alkaline methanol oxidation reaction (MOR) holds immense promise for value-added organic products coupled with hydrogen production, but still remain challenging. Herein, we construct ultrathin NiO/Cr2 O3 in-plane heterostructures to promote the alkaline MOR process. Experimental and theoretical studies reveal that NiO/Cr2 O3 in-plane heterostructures enable a favorable upshift of the d-band center and enhanced adsorption of hydroxyl species, leading to accelerated generation of active NiO(OH)ads species. Furthermore, ultrathin in-plane heterostructures endow the catalyst with good charge transfer ability and adsorption behavior of methanol molecules onto catalytic sites, contributing to the improvement of alkaline MOR kinetics. As a result, ultrathin NiO/Cr2 O3 in-plane heterostructures exhibit a remarkable MOR activity with a high current density of 221 mA cm-2 at 0.6 V vs Ag/AgCl, which is 7.1-fold larger than that of pure NiO nanosheets and comparable with other highly active catalysts reported so far. This work provides an effectual strategy to optimize the activity of nickel-based catalysts and highlights the dominate efficacy of ultrathin in-plane heterostructures in alkaline MOR.

Deswelling Mechanisms of PNIPAM Grafted in Nanochannels: A Molecular Dynamics Simulation Study.

Porous thermosensitive hydrogels exhibit a more flexible strategy for freshwater capture compared to conventional hydrogels. This study employs molecular dynamics (MD) simulation to investigate the deswelling behavior of poly(N-isopropylacrylamide) (PNIPAM) grafted within the nanochannel, aiming to elucidate the deswelling elimination process at various temperatures. Notably, a distinct phase separation is observed at specific temperatures above the lower solution temperature (LCST). Furthermore, this study takes the effect of heat flux into account, wherein distinct heat fluxes lead to varying levels of phase separation between water and the polymer. Specifically, the number of hydrogen bonds, volume of polymer chains, and density distribution of water molecules are statistically analyzed to reveal the mechanism of phase separation in a thermosensitive hydrogel. These findings provide insight into the accelerated deswelling kinetics of the PNIPAM polymer chain, which has guiding significance for the field of water harvesting by the enhancement of the water release capacity in thermosensitive hydrogels.

Genome-Wide Identification and Comprehensive Analysis of the FtsH Gene Family in Soybean (Glycine max).

The filamentation temperature-sensitive H (FtsH) gene family is critical in regulating plant chloroplast development and photosynthesis. It plays a vital role in plant growth, development, and stress response. Although FtsH genes have been identified in a wide range of plants, there is no detailed study of the FtsH gene family in soybean (Glycine max). Here, we identified 34 GmFtsH genes, which could be categorized into eight groups, and GmFtsH genes in the same group had similar structures and conserved protein motifs. We also performed intraspecific and interspecific collinearity analysis and found that the GmFtsH family has large-scale gene duplication and is more closely related to Arabidopsis thaliana. Cis-acting elements analysis in the promoter region of the GmFtsH genes revealed that most genes contain developmental and stress response elements. Expression patterns based on transcriptome data and real-time reverse transcription quantitative PCR (qRT-PCR) showed that most of the GmFtsH genes were expressed at the highest levels in leaves. Then, GO enrichment analysis indicated that GmFtsH genes might function as a protein hydrolase. In addition, the GmFtsH13 protein was confirmed to be localized in chloroplasts by a transient expression experiment in tobacco. Taken together, the results of this study lay the foundation for the functional determination of GmFtsH genes and help researchers further understand the regulatory network in soybean leaf development.

Thermally Crosslinked F-rich Polymer to Inhibit Lead Leakage for Sustainable Perovskite Solar Cells and Modules.

High-performance perovskite solar cells have demonstrated commercial viability, but still face the risk of contamination from lead leakage and long-term stability problems caused by defects. Here, an organic small molecule (octafluoro-1,6-hexanediol diacrylate) is introduced into the perovskite film to form a polymer through in situ thermal crosslinking, of which the carbonyl group anchors the uncoordinated Pb2+ of perovskite and reduces the leakage of lead, along with the -CF2 - hydrophobic group protecting the Pb2+ from water invasion. Additionally, the polymer passivates varieties of Pb-related and I-related defects through coordination and hydrogen bonding interactions, regulating the crystallization of perovskite film with reduced trap density, releasing lattice strain, and promoting carrier transport and extraction. The optimal efficiencies of polymer-incorporated devices are 24.76 % (0.09 cm2 ) and 20.66 % (14 cm2 ). More importantly, the storage stability, thermal stability, and operational stability have been significantly improved.

Pd-Enriched-Core/Pt-Enriched-Shell High-Entropy Alloy with Face-Centred Cubic Structure for C1 and C2 Alcohol Oxidation.

High-entropy alloy nanoparticles (HEA NPs) have aroused great interest globally with their unique electrochemical, catalytic, and mechanical properties, as well as diverse activity and multielement tunability for multi-step reactions. Herein, a facile low-temperature synthesis method at atmospheric pressure is employed to synthesize Pd-enriched-HEA-core and Pt-enriched-HEA-shell NPs with a single phase of face-centred cubic structure. Interestingly, the lattice of both Pd-enriched-HEA-core and Pt-enriched-HEA-shell enlarge during the formation process of HEA, with tensile strains included in the core and shell of HEA. The as-obtained PdAgSn/PtBi HEA NPs show excellent electrocatalytic activity and durability for methanol oxidation reaction (MOR) and ethanol oxidation reaction (EOR). The specific (mass) activity of PdAgSn/PtBi HEA NPs for MOR is 4.7 mA cm-2 (2874 mA mg(Pd+Pt) -1 ), about 1.7 (5.9) and 1.5 (4.8) times higher than that of commercial Pd/C and Pt/C catalysts, respectively. Additional to high-entropy effect, Pt sites and Pd sites on the interface of the HEA act synergistically to facilitate the multi-step process towards EOR. This study offers a promising way to find a feasible route for scalable HEA manufacturing with promising applications.

Poloxam Thermosensitive Hydrogels Loaded with hFGF2-Linked Camelina Lipid Droplets Accelerate Skin Regeneration in Deep Second-Degree Burns.

Burn injuries are difficult to manage due to the defect of large skin tissues, leading to major disability or even death. Human fibroblast growth factor 2 (hFGF2) is known to promote burn wound healing. However, direct administration of hFGF2 to the wound area would affect the bioactivity. To provide a supportive environment for hFGF2 and control its release in a steady fashion, in this research, we developed novel thermosensitive poloxam hydrogels delivered with hFGF2-linked Camelina lipid droplets (CLD-hFGF2 hydrogels). Cryopreserved scanning electron microscopy (SEM) results indicated that the incorporation of CLD-hFGF2 does not significantly affect the inner structure of hydrogels. The rheological properties showed that CLD-hFGF2 hydrogels gelated in response to temperature, thus optimizing the delivery method. In vitro, CLD-hFGF2 could be released from hydrogels for 3 days after drug delivery (the release rate was 72%), and the release solution could still promote the proliferation and migration of NIH3T3 cells. In vivo, compared with hydrogels alone or with direct CLD-hFGF2 administration, CLD-hFGF2 hydrogels had the most obvious effect on deep second-degree burn wound healing. This work indicates that CLD-hFGF2 hydrogels have potential application value in burn wound healing.

Droplet Nucleation and Growth in the Presence of Noncondensable Gas: A Molecular Dynamics Study.

The presence of noncondensable gas (NCG) followed by undesirable heat transfer deterioration cannot be avoided in some situations. In this work, droplet nucleation and growth for the Ar-Ne mixed system are investigated using molecular dynamics simulation. Different droplet state transition modes corresponding to the subcooling degree or NCG content are obtained. The interaction between NCG and a droplet caused by gas enrichment near the solid surface is considered to explain the droplet wetting state during the condensation process. Finally, the disappearance mechanism of the flooding mode on the nanostructured surface under a large amount of NCG is clarified from the nanoscale, which could encourage a clear understanding of the NCG effect on dropwise condensation heat transfer on nanostructured superhydrophobic surfaces.

The effects of bio-inspired micro/nano scale structures on anti-icing properties.

Ice formation and accumulation have detrimental effects on commercial surfaces and people's lives. The ice adhesion strength decreases with increasing surface hydrophobicity, and the superhydrophobicity of a surface can be constructed by a combination of low surface free energy and high surface roughness. Conversely, the characteristics of biological surfaces have aroused wide attention as a result of the superhydrophobicity of plants and animals, deriving from the synergistic effects of chemical compositions and multi-scale hierarchical structures. Therefore, inspired by bio-mimetic studies on biological surfaces, a lot of artificial bio-inspired superhydrophobic surfaces have been broadly designed and constructed. Herein, we aim to summarize the fundamental theories of surface wettability and recent progress in the fabrication of bio-inspired surfaces. The bio-inspired surfaces prepared by different facile methods not only have superhydrophobicity, but also have anti-icing/icephobic properties. In the end, some challenges and problems in the future study and advancement of bio-inspired superhydrophobic surfaces are proposed.

Integration of sRNA, degradome, transcriptome analysis and functional investigation reveals gma-miR398c negatively regulates drought tolerance via GmCSDs and GmCCS in transgenic Arabidopsis and soybean.

BACKGROUND: Drought conditions adversely affect soybean growth, resulting in severe yield losses worldwide. Increasing experimental evidence indicates miRNAs are important post-transcriptional regulators of gene expression. However, the drought-responsive molecular mechanism underlying miRNA-mRNA interactions remains largely uncharacterized in soybean. Meanwhile, the miRNA-regulated drought response pathways based on multi-omics approaches remain elusive. RESULTS: We combined sRNA, transcriptome and degradome sequencing to elucidate the complex regulatory mechanism mediating soybean drought resistance. One-thousand transcripts from 384 target genes of 365 miRNAs, which were enriched in the peroxisome, were validated by degradome-seq. An integrated analysis showed 42 miRNA-target pairs exhibited inversely related expression profiles. Among these pairs, a strong induction of gma-miR398c as a major gene negatively regulates multiple peroxisome-related genes (GmCSD1a/b, GmCSD2a/b/c and GmCCS). Meanwhile, we detected that alternative splicing of GmCSD1a/b might affect soybean drought tolerance by bypassing gma-miR398c regulation. Overexpressing gma-miR398c in Arabidopsis thaliana L. resulted in decreased percentage germination, increased leaf water loss, and reduced survival under water deficiency, which displayed sensitivity to drought during seed germination and seedling growth. Furthermore, overexpressing gma-miR398c in soybean decreased GmCSD1a/b, GmCSD2a/b/c and GmCCS expression, which weakened the ability to scavenge O2.-, resulting in increased relative electrolyte leakage and stomatal opening compared with knockout miR398c and wild-type soybean under drought conditions. CONCLUSION: The study indicates that gma-miR398c negatively regulates soybean drought tolerance, and provides novel insights useful for breeding programs to improve drought resistance by CRISPR technology.

Expression of a recombinant hybrid antimicrobial peptide magainin II-cecropin B in the mycelium of the medicinal fungus Cordyceps militaris and its validation in mice.

BACKGROUND: Antibiotic residues can cause antibiotic resistance in livestock and their food safety-related issues have increased the consumer demand for products lacking these residues. Hence, developing safe and effective antibiotic alternatives is important to the animal feed industry. With their strong antibacterial actions, antimicrobial peptides have potential as antibiotic alternatives. RESULTS: We investigated the antibacterial and immunomodulatory activities and the mechanisms of action of an antimicrobial peptide. The hybrid antimicrobial peptide magainin II-cecropin B (Mag II-CB) gene was transformed into the medicinal Cordyceps militaris fungus. Recombinant Mag II-CB exhibited broad-spectrum antibacterial activity in vitro and its antibacterial and immunomodulatory functions were evaluated in BALB/c mice infected with Escherichia coli (ATCC 25922). Histologically, Mag II-CB ameliorated E. coli-related intestinal damage and maintained the integrity of the intestinal mucosal barrier by up-regulating tight junction proteins (zonula occludens-1, claudin-1 and occludin). The intestinal microbial flora was positively modulated in the Mag II-CB-treated mice infected with E. coli. Mag II-CB treatment also supported immune functioning in the mice by regulating their plasma immunoglobulin and ileum secreted immunoglobulin A levels, by attenuating their pro-inflammatory cytokine levels, and by elevating their anti-inflammatory cytokines levels. Moreover, directly feeding the infected mice with the C. militaris mycelium producing Mag II-CB further proofed the antibacterial and immunomodulatory functions of recombinant hybrid antimicrobial peptide. CONCLUSION: Our findings suggest that both purified recombinant AMPs and C. militaris mycelium producing AMPs display antibacterial and immunomodulatory activities in mice. And C. militaris producing AMPs has the potential to become a substitute to antibiotics as a feed additive for livestock in future.

Improved Adsorption Performance of α-Fe2O3 Modified with Carbon Spheres for Cr(VI) Removal from Aqueous Solution.

Carbons spheres, easily fabricated by glucose hydrolysis, were integrated with α-Fe2O3 for removing heavy metal from contaminated water. The α-Fe2O3 particles were anchored on the surface of carbon spheres and the combination of two components provided more rough surface area, enhancing the adsorption performance of α-Fe2O3. The removal efficiency of Cr(VI) on α-Fe2O3/carbon spheres was 88% in 240 min, which was 1.93 times higher than that of pristine α-Fe2O3. The investigation on adsorption kinetics and isotherm showed that the pseudo-first-order kinetic and Langmuir isotherm models could well fit the experimental data. The adsorption rate was mainly controlled by both exterior and interior surface diffusion steps. Adsorption thermodynamics investigation proved that the Cr(VI) adsorption on α-Fe2O3/carbon spheres was an endothermic (93.32 kJ · mol-1) and spontaneous (-3.96 kJ · mol-1) physical process. The adsorption capacity was 18.7 mg · g-1 and after recycling five times, the decline of adsorption capacity of α-Fe2O3/carbon spheres was 7.8%, which indicated that the adsorbents could be recycled in the removal of Cr(VI). It indicated that the hybridization with carbon spheres could enhance the adsorption performance of α-Fe2O3, which might be used as convenient adsorbent to remove heavy metal in industry.

Typical Application of Sound Field in Wastewater Treatment with Fluidized Bed Photocatalytic Reactor.

The effect of a sound field on wastewater treatment with a fluidized bed photocatalytic reactor (FBPR) was investigated. With Alizarin Green (AG) being the sole infectant, the Fe-doped TiO2 catalyst prepared was used as the fluidized media. According to the Langmuir-Hinshelwood model, the photocatalytic degradation follows the pseudo-first-order reaction kinetics with respect to the concentration of AG. Sound field application allowed the fluidization of the fine powder at high liquid flow rates; thus, the mass transfer rate between organic pollutant and particle photocatalyst was enhanced and the efficiency of degradation was increased. As expected, the degradation rate constant increased with increasing sound pressure level, as well as increased with increasing sound frequency ranging from 50 to 100 Hz, then further decreased with increasing sound frequency from 100 to 200 Hz. In addition, Fe doping is also responsible for the enhanced photocurrent response of the Fe-doped TiO2 nanoparticle in FBPR relative to pure TiO2.

A dynamic multi-objective evolutionary algorithm using center and multi-direction prediction strategies.

Dynamic multi-objective optimization problems have been popular because of its extensive application. The difficulty of solving the problem focuses on the moving PS as well as PF dynamically. A large number of efficient strategies have been put forward to deal with such problems by speeding up convergence and keeping diversity. Prediction strategy is a common method which is widely used in dynamic optimization environment. However, how to increase the efficiency of prediction is always a key but difficult issue. In this paper, a new prediction model is designed by using the rank sums of individuals, and the position difference of individuals in the previous two adjacent environments is defined to identify the present change type. The proposed prediction strategy depends on environment change types. In order to show the effectiveness of the proposed algorithm, the comparison is carried out with five state-of-the-art approaches on 20 benchmark instances of dynamic multi-objective problems. The experimental results indicate the proposed algorithm can get good convergence and distribution in dynamic environments.

The synergistic effect of Cl doping and Bi coupling to promote the carrier separation of BiOBr for efficient photocatalytic nitrogen reduction.

Photocatalytic nitrogen reduction reaction (NRR) is a sustainable process for ammonia synthesis under mild conditions. However, photocatalytic NRR activity and are generally limited by inefficient carrier separation and transfer. Therefore, parallel engineering of bulk phase doping and surface coupling is critical to achieving the goal of efficient NRR. In this study, Cl doped BiOBr nanosheet assemblies (BiOBr/Cl) were constructed in delicately designed deep eutectic solvents (DESs), combined with ionothermal methods at low temperatures and Bi3+ exsolution reduction strategy at high temperatures. The unique liquid state and reducibility of DESs induce the reduction of Bi3+ and the in situ coupling of Bi quantum dots at the surface of BiOBr/Cl nanosheets along with the construction of Bi-BiOBr/Cl nanosheet assemblies. The experimental results show that Cl doping could reduce the exciton dissociation energy and promote its dissociation to free carriers. Bi quantum dots could form tightly coupled Schottky junction with BiOBr/Cl enabling the efficient and unidirectional transmission of photogenerated electrons from BiOBr/Cl to metal Bi. The formed electron deficient region at Schottky interface promotes the adsorption and activation of N2. The hierarchical structure of Bi-BiOBr/Cl nanosheet assembly benefits to providing more N2 adsorption active sites. The DFT calculation shows that the accumulation of high concentration of active hydrogen in Bi-BiOBr/Cl leads to a significant decrease of energy barrier of the first step hydrogenation of N2. Bi-BiOBr/Clis more inclined to adsorb nitrogen for NRR in comparison with H* for hydrogen production. The synergistic effect of Cl doping and Bi coupling result in a high NRR activity of Bi-BiOBr/Cl photocatalyst of 6.67 mmol·g-1·h-1, which was 11.3 times higher than that of initial BiOBr. This study provides a promising strategy for designing highly active NRR photocatalysts with high efficiency carrier dissociation and transport.

Promoting OH* adsorption by defect engineering of CuO catalysts for selective electro-oxidation of amines to nitriles coupled with hydrogen production.

Developing a high-efficiency benzylamine oxidation reaction (BOR) to replace the sluggish oxygen evolution reaction (OER) is an attractive pathway to promote H2 production and concurrently realize organic conversion. However, the electrochemical BOR performance is still far from satisfactory. Herein, we present a self-supported CuO nanorod array with abundant oxygen vacancies on copper foam (Vo-rich CuO/CF) as a promising anode for selective electro-oxidation of benzylamine (BA) to benzonitrile (BN) coupled with cathodic H2 generation. In situ infrared spectroscopy demonstrates the selective conversion of BA into BN on Vo-rich CuO. Furthermore, in situ Raman spectroscopy discloses a direct electro-oxidation mechanism of BA driven by electroactive hydroxyl species (OH*) over the Vo-rich CuO catalyst. Theoretical and experimental studies verify that the presence of oxygen vacancies is more favorable for the adsorption of OH* and BA molecules, enabling accelerated kinetics for the BOR. As expected, the Vo-rich CuO/CF electrode delivers outstanding BOR activity and stability, giving a high faradaic efficiency (FE) of over 93% for BN production at a potential of 0.40 V vs. Ag/AgCl. Impressively, almost 100% FE for H2 production can be further achieved at the NiSe cathode by integrating BA oxidation in a two-electrode electrolyzer.

Boosting urea-assisted water splitting over P-MoO2@CoNiP through Mo leaching/reabsorption coupling CoNiP reconstruction.

Combining the urea oxidation reaction (UOR) with the hydrogen evolution reaction (HER) is an effective technology for energy-saving hydrogen production. Herein, a bifunctional electrocatalyst with CoNiP nanosheet coating on P-doped MoO2 nanorods (P-MoO2@CoNiP) is obtained via a two-step hydrothermal followed a phosphorization process. The catalyst demonstrates exceptional alkaline HER performance due to the formation of MoO2 and the dissolution/absorption of Mo. Meanwhile, the inclusion of Co and P in the P-MoO2@CoNiP catalyst facilitated the formation of NiOOH, enhancing UOR performance. Density functional theory calculations reveal that the hydrogen adsorption Gibbs free energy (ΔGH*) of P-MoO2@CoNiP is closer to 0 eV than CoNiP, favoring the HER. The catalyst only needs -0.08 and 1.38 V to reach 100 mA cm-2 for catalyzing the HER and UOR, respectively. The full urea electrolysis system driven by P-MoO2@CoNiP requires 1.51 V to achieve 100 mA cm-2, 120 mV lower than the traditional water electrolysis.

Sustainable thermal regulation improves stability and efficiency in all-perovskite tandem solar cells.

Mixed Sn-Pb perovskites have emerged as promising photovoltaic materials for both single- and multi-junction solar cells. However, achieving their scale-up and practical application requires further enhancement in stability. We identify that their poor thermal conductivity results in insufficient thermal transfer, leading to heat accumulation within the absorber layer that accelerates thermal degradation. A thermal regulation strategy by incorporating carboranes into perovskites is developed; these are electron-delocalized carbon-boron molecules known for their efficient heat transfer capability. We specifically select ortho-carborane due to its low thermal hysteresis. We observe its existence through the perovskite layer showing a decreasing trend from the buried interface to the top surface, effectively transferring heat and lowering the surface temperature by around 5 °C under illumination. o-CB also facilitates hole extraction at the perovskite/PEDOT:PSS interface and reduces charge recombination. These enable mixed Sn-Pb cells to exhibit improved thermal stability, retaining 80% of their initial efficiencies after aging at 85 °C for 1080 hours. When integrated into monolithic all-perovskite tandems, we achieve efficiencies of over 27%. A tandem cell maintains 87% of its initial PCE after 704 h of continuous operation under illumination.

Boron modification promoting electrochemical surface reconstruction of NiFe-LDH for efficient and stable freshwater/seawater oxidation catalysis.

Transition metal-based electrocatalysts generally take place surface reconstruction in alkaline conditions, but little is known about how to improve the reconstruction to a highly active oxyhydroxide surface for an efficient and stable oxygen evolution reaction (OER). Herein, we develop a strategy to accelerate surface reconstruction by combining boron modification and cyclic voltammetry (CV) activation. Density functional theory calculations and in-situ/ex-situ characterizations indicate that both B-doping and electrochemical activation can reduce the energy barrier and contribute to the surface evolution into highly active oxyhydroxides. The formed oxyhydroxide active phase can tune the electronic configuration and boost the OER process. The reconstructed catalyst of CV-B-NiFe-LDH displays excellent alkaline OER performance in freshwater, simulated seawater, and natural seawater with low overpotentials at 100 mA cm-2 (η100: 219, 236, and 255 mV, respectively) and good durability. This catalyst also presents outstanding Cl- corrosion resistance in alkalized seawater electrolytes. The CV-B-NiFe-LDH||Pt/C electrolyzer reveals prominent performance for alkalized freshwater/seawater splitting. This study provides a guideline for developing advanced OER electrocatalysts by promoting surface reconstruction.

Genome-Wide Association Analysis of Yield-Related Traits and Candidate Genes in Vegetable Soybean.

Owing to the rising demand for vegetable soybean products, there is an increasing need for high-yield soybean varieties. However, the complex correlation patterns among quantitative traits with genetic architecture pose a challenge for improving vegetable soybean through breeding. Herein, a genome-wide association study (GWAS) was applied to 6 yield-related traits in 188 vegetable soybean accessions. Using a BLINK model, a total of 116 single nucleotide polymorphisms (SNPs) were identified for plant height, pod length, pod number, pod thickness, pod width, and fresh pod weight. Furthermore, a total of 220 genes were found in the 200 kb upstream and downstream regions of significant SNPs, including 11 genes encoding functional proteins. Among them, four candidate genes, Glyma.13G109100, Glyma.03G183200, Glyma.09G102200, and Glyma.09G102300 were analyzed for significant haplotype variations and to be in LD block, which encode MYB-related transcription factor, auxin-responsive protein, F-box protein, and CYP450, respectively. The relative expression of candidate genes in V030 and V071 vegetable soybean (for the plant height, pod number, and fresh pod weight of V030 were lower than those of the V071 strains) was significantly different, and these genes could be involved in plant growth and development via various pathways. Altogether, we identified four candidate genes for pod yield and plant height from vegetable soybean germplasm. This study provides insights into the genomic basis for improving soybean and crucial genomic resources that can facilitate genome-assisted high-yielding vegetable soybean breeding.

Multi-focus plasmonic lens design based on holography.

Multi-focus plasmonic lens with metallic nanoslits of variant widths have great potential applications in optical interconnection, integrated optics and nanophotonics. But the design method with simulated annealing algorithm or Yang-Gu algorithm requires complex calculation and multi focuses are limited to be set on the same output plane. In this paper, we propose a design method based on holography. The desired light field distribution and the incident plane wave can be treated as object wave and reference wave, respectively. So the calculation is relative simple and multi focuses can be located in different output plane. Numerical simulation of multi-focus lens design is performed through finite-difference time-domain (FDTD) method and the result confirms the feasibility of our method.