Orthogonal Light-Dependent Membrane Adhesion Induces Social Self-Sorting and Member-Specific DNA Communication in Synthetic Cell Communities.

Developing orthogonal chemical communication pathways in diverse synthetic cell communities is a considerable challenge due to the increased crosstalk and interference associated with large numbers of different types of sender-receiver pairs. Herein, the authors control which sender-receiver pairs communicate in a three-membered community of synthetic cells through red and blue light illumination. Semipermeable protein-polymer-based synthetic cells (proteinosomes) with complementary membrane-attached protein adhesion communicate through single-stranded DNA oligomers and synergistically process biochemical information within a community consisting of one sender and two different receiver populations. Different pairs of red and blue light-responsive protein-protein interactions act as membrane adhesion mediators between the sender and receivers such that they self-assemble and socially self-sort into different multicellular structures under red and blue light. Consequently, distinct sender-receiver pairs come into the signaling range depending on the light illumination and are able to communicate specifically without activation of the other receiver population. Overall, this work shows how photoswitchable membrane adhesion gives rise to different self-sorting protocell patterns that mediate member-specific DNA-based communication in ternary populations of synthetic cells and provides a step towards the design of orthogonal chemical communication networks in diverse communities of synthetic cells.

A Photo-degradable Crosslinker for the Development of Light-responsive Protocell Membranes.

The achievement of light-responsive behaviours is an important target for protocell engineering to allow control of fundamental protocellular processes such as communication via diffusible chemical signals, shape changes or even motility at the flick of a switch. As a step towards this ambitious goal, here we describe the synthesis of a novel poly(ethylene glycol)-based crosslinker, reactive towards nucleophiles, that effectively degrades with UV light (405 nm). We demonstrate its utility for the fabrication of the first protocell membranes capable of light-induced disassembly, for the photo-generation of patterns of protocells, and for the modulation of protocell membrane permeability. Overall, our results not only open up new avenues towards the engineering of spatially organised, communicating networks of protocells, and of micro-compartmentalised systems for information storage and release, but also have important implications for other research fields such as drug delivery and soft materials chemistry.

Automated analysis of soft material microindentation.

An understanding of the mechanical properties of soft hydrogel materials over multiple length scales is important for their application in many fields. Typical measurement methods provide either bulk mechanical properties (compression, tensile, rheology) or probing of nano or microscale properties and heterogeneity (nanoindentation, AFM). In this work we demonstrate the complementarity of instrumented microindentation to these techniques, as it provides representative Young's moduli for soft materials with minimal influence of the experimental parameters chosen, and allows mechanical property mapping across macroscopic areas. To enable automated analysis of the large quantities of data required for these measurements, we develop a new fitting algorithm to process indentation data. This method allows for the determination of Young's moduli from imperfect data by automatic selection of a region of the indentation curve which does not display inelastic deformation or substrate effects. We demonstrate the applicability of our approach with a range of hydrogels, including materials with patterns and gradients in stiffness, and expect the techniques described here to be useful developments for the mechanical analysis of a wide range of soft and biological systems.

A Novel Acid-Degradable PEG Crosslinker for the Fabrication of pH-Responsive Soft Materials.

The design and synthesis of a novel acid-degradable polyethylene glycol-based N-hydroxysuccinimide (NHS) ester-activated crosslinker is reported. The crosslinker is reactive towards nucleophiles and features a central ketal functional group that is stable at pH > 7.5 and rapidly hydrolyses at pH > 6.0. The crosslinker is used to (i) fabricate acid-degradable polysaccharide hydrogels that exhibit controlled degradation upon exposure to an acidic environment or via endogenous enzyme activity; and (ii) construct hydrogel-filled protein-polymer microcompartments (termed proteinosomes) capable of pH-dependent membrane disassembly. Taken together the results provide new opportunities for the fabrication of pH-responsive soft materials with potential applications in drug delivery, tissue engineering, and soft-matter bioengineering.

From protocells to prototissues: a materials chemistry approach.

Prototissues comprise free-standing 3D networks of interconnected protocell consortia that communicate and display synergistic functions. Significantly, they can be constructed from functional molecules and materials, providing unprecedented opportunities to design tissue-like architectures that can do more than simply mimic living tissues. They could function under extreme conditions and exhibit a wide range of mechanical properties and bio-inspired metabolic functions. In this perspective, I will start by describing recent advancements in the design and synthetic construction of prototissues. I will then discuss the next challenges and the future impact of this emerging research field, which is destined to find applications in the most diverse areas of science and technology, from biomedical science to environmental science, and soft robotics.

Programmed assembly of synthetic protocells into thermoresponsive prototissues.

Although several new types of synthetic cell-like entities are now available, their structural integration into spatially interlinked prototissues that communicate and display coordinated functions remains a considerable challenge. Here we describe the programmed assembly of synthetic prototissue constructs based on the bio-orthogonal adhesion of a spatially confined binary community of protein-polymer protocells, termed proteinosomes. The thermoresponsive properties of the interlinked proteinosomes are used collectively to generate prototissue spheroids capable of reversible contractions that can be enzymatically modulated and exploited for mechanochemical transduction. Overall, our methodology opens up a route to the fabrication of artificial tissue-like materials capable of collective behaviours, and addresses important emerging challenges in bottom-up synthetic biology and bioinspired engineering.

"Shine & Click" Photo-Induced Interfacial Unmasking of Strained Alkynes on Small Water-Soluble Gold Nanoparticles.

In this study, we report the design, synthesis, and characterization of small 3 nm water soluble gold nanoparticles (AuNPs) that feature cyclopropenone-masked strained alkyne moieties capable of undergoing interfacial strain-promoted cycloaddition (i-SPAAC) with azides after exposure to UV-A light. A strained alkyne precursor was incorporated onto AuNPs by direct ligand exchange of a thiol-modified cyclopropenone-masked dibenzocyclooctyne (photoDIBO) ligand. These photoDIBO-AuNPs were characterized by 1 H NMR, IR, and UV/Vis spectroscopy, as well as transmission electron microscopy (TEM) and thermogravimetric analysis (TGA), and the extent of modification was quantified. Upon irradiation with UV-A light, photoDIBO-AuNPs underwent efficient and quantitative regeneration of the parent strained alkyne by photochemical decarbonylation to afford DIBO-derivatized AuNPs. DIBO-AuNPs were found to react cleanly and rapidly (k=5.3×10-2 m-1 s-1 ) by an interfacial strain-promoted alkyne-azide cycloadditon (i-SPAAC) with benzyl azide, which served as a simple model system. Furthermore, DIBO-AuNPs were reacted with various azides and a nitrone (interfacial strain-promoted alkyne-nitrone cycloaddition, i-SPANC) to showcase the generality of this approach for the facile modification of AuNP surfaces and their properties. The cyclopropenone-based photo-triggered click chemistry at the interface of water-soluble AuNPs offers exciting opportunities for the atom-by-atom control and assembly of functional materials for applications in materials and biomaterials science as well as in chemical biology.

Fluorogenic Gold Nanoparticle (AuNP) Substrate: A Model for the Controlled Release of Molecules from AuNP Nanocarriers via Interfacial Staudinger-Bertozzi Ligation.

The ability to regulate small-molecule release from metallic nanoparticle substrates offers unprecedented opportunities for nanocarrier-based imaging, sensing, and drug-delivery applications. Herein we report a novel and highly specific release methodology off gold nanoparticle (AuNP) surfaces based on the bioorthogonal Staudinger-Bertozzi ligation. A thiol ligand bearing the molecular cargo, a Rhodamine B dye derivative, was synthesized and used to modify small water-soluble 5 nm AuNPs. Upon incorporation into the AuNP monolayer, we observed efficient quenching of the dye emission, resulting in a very low level of fluorescence emission that provided the baseline from which cargo release was monitored. We examined the ability of these AuNPs to react with azide molecules via Staudinger-Bertozzi ligation on the nanoparticle surface by monitoring the fluorescence emission after the introduction of an organic azide. We observed an immediate increase in emission intensity upon azide addition, which corresponded to the release of the dye into the bulk solution. The 31P NMR spectrum of the AuNP product also agrees with the formation of the ligation product. Thus this system represents a novel and highly specific release methodology off AuNP surfaces that can have potential applications in drug delivery, sensing, and materials science.

Insights on the Application of the Retro Michael-Type Addition on Maleimide-Functionalized Gold Nanoparticles in Biology and Nanomedicine.

The glutathione-mediated retro Michael-type addition reaction is demonstrated to take place at the interface of small water-soluble maleimide-functionalized gold nanoparticles (Maleimide-AuNP). The retro Michael-type addition reaction can be blocked by hydrolyzing the Michael addition thioether adduct at the nanoparticle's interface under reaction conditions that do not cause AuNP decomposition. This procedure "locks" the molecule of interest onto the Maleimide-AuNP template for potential uses in medical imaging and bioconjugation, ensuring no loss of the molecular cargo from the nanocarrier. On the other hand, the glutathione-mediated retro Michael-type addition reaction can be exploited for delivering a molecular payload. As a proof of concept, a fluorogenic molecular cargo was incorporated onto a Maleimide-AuNP and delivered via the glutathione-mediated retro Michael-type addition reaction.

Gold nanosponges (AuNS): a versatile nanostructure for surface-enhanced Raman spectroscopic detection of small molecules and biomolecules.

Prepared by simple pour and mix chemistry, gold nanosponges (AuNS) are versatile structures for surface-enhanced Raman spectroscopy (SERS). An investigation into the enhancement is performed by relating the nanostructure's morphology to the SERS signal. The potential of the AuNS in SERS-based molecular and biomolecular detection is introduced.

Small gold nanoparticles for interfacial Staudinger-Bertozzi ligation.

Small gold nanoparticles (AuNPs) that possess interfacial methyl-2-(diphenylphosphino)benzoate moieties have been successfully synthesized (Staudinger-AuNPs) and characterized by multi-nuclear MR spectroscopy, transmission electron microscopy (TEM), UV-Vis spectroscopy, thermogravimetric analysis, and X-ray photoelectron spectroscopy (XPS). In particular, XPS was remarkably sensitive for characterization of the novel nanomaterial, and in furnishing proof of its interfacial reactivity. These Staudinger-AuNPs were found to be stable to the oxidation of the phosphine center. The reaction with benzyl azide in a Staudinger-Bertozzi ligation, as a model system, was investigated using (31)P NMR spectroscopy. This demonstrated that the interfacial reaction was clean and quantitative. To showcase the potential utility of these Staudinger-AuNPs in bioorganic chemistry, a AuNP bioconjugate was prepared by reacting the Staudinger-AuNPs with a novel azide-labeled CRGDK peptide. The CRGDK peptide could be covalently attached to the AuNP efficiently, chemoselectively, and with a high loading.

Conformationally constrained functional peptide monolayers for the controlled display of bioactive carbohydrate ligands.

In this study, we employed thiolated peptides of the conformationally constrained, strongly helicogenic α-aminoisobutyric acid (Aib) residue to prepare self-assembled monolayers (SAMs) on gold surfaces. Electrochemistry and infrared reflection absorption spectroscopy support the formation of very well packed Aib-peptide SAMs. The immobilized peptides retain their helical structure, and the resulting SAMs are stabilized by a network of intermolecular H bonds involving the NH groups adjacent to the Au surface. Binary SAMs containing a synthetically defined glycosylated mannose-functionalized Aib-peptide as the second component display similar features, thereby providing reproducible substrates suitable for the controlled display of bioactive carbohydrate ligands. The efficiency of such Aib-based SAMs as a biomolecular recognition platform was evidenced by examining the mannose-concanavalin A interaction via surface plasmon resonance biosensing.

A novel diiminopyridine ligand containing redox active Co(III) mixed sandwich complexes.

The synthesis of a diiminopyridine (DIMPY) ligand containing pendant mixed sandwich cobaltocene functionalities on the imine nitrogens was prepared and characterized (18). Its reactivity with 2 equiv of GeCl2·dioxane and SnCl2 in THF yields the respective Lewis base mediated autoionization products (18Ge and 18Sn). Analogous low-valent complexes utilizing an N,N'- differocenyl diiminopyridine support were also prepared (15Ge and 15Sn). All compounds were characterized by spectroscopic and X-ray crystallographic methods. Electrochemical studies were conducted for both 15Sn and the precursor of 18.

Towards the design of self-sorting nanomaterials through kinetically directed chemoselective control over interfacial surface chemistry.

A gold nanoparticle platform is described in which post-synthesis surface modifications can be conducted using kinetically-tunable strain-promoted cycloaddition chemistry, which is dependent on the electronic properties of the complementary dipolar species. This permits chemoselective reactivity with one reactive dipole over another less reactive dipole, providing exciting opportinities for kinetically-directed self-sorting strategies.

Properties and Curing Kinetics of a Processable Binary Benzoxazine Blend.

A benzoxazine system is presented combining liquid cardanol-based benzoxazine (CA-a) and an effective initiator (3,3'-thiodipropionic acid, TDA) to bisphenol A-based benzoxazine (BA-a). The resultant mixture of monomeric precursors shows excellent fluidity and a relatively low peak polymerization temperature of around 200 °C. Moreover, the cured polybenzoxazine displays a high thermal decomposition temperature (Td,5% > 330 °C), a moderately high glass transition temperature (∼148 °C), and robust mechanical strength (storage modulus ∼ 2.8 GPa) comparable to those of the polybenzoxazine homopolymer obtained by curing BA-a. A comprehensive investigation into the microstructure and curing kinetics has also been conducted on the system, offering an extensive background for future studies.

Improved methodology for the preparation of water-soluble maleimide-functionalized small gold nanoparticles.

Improved methodology to prepare maleimide-functionalized, water-soluble, small (<3 nm) gold nanoparticles using a retro-Diels-Alder strategy that we developed for similar organic-soluble AuNP's is described. Importantly, our results suggest that a recent paper by Zhu, Waengler, Lennox, and Schirrmacher describing a similar strategy gave results inconsistent with the formation of the titled maleimide-modified AuNP (Zhu, J.; Waengler, C.; Lennox, R. B.; Schirrmacher, R. Langmuir2012, 28, 5508) as the major product, but consistent with the major product being an adduct derived from the hydrolysis of maleimide formed under the conditions used for the required deprotection of the maleimide. Our methodology provides an efficient and accessible route to pure maleimide-modified small AuNP's that circumvents the formation of the hydrolysis product. The maleimide-modified small AuNP's are versatile because they are soluble in water and in a wide range of organic solvents and their reactivity can now be properly exploited as a reactive moiety in Michael addition for bioconjugation studies in aqueous solution.

The syntheses and electrochemical studies of a ferrocene substituted diiminopyridine ligand and its P, S, Se, and Te complexes.

A new reversible, redox active diiminopyridine ligand (1Fc) containing pendant ferrocene functionalities was isolated and fully characterized. The reaction of 1Fc with chalcogen pseudohalides of sulfur, selenium, and tellurium yielded the respective N,N',N″-chelated chalcogen dications. Phosphorus chemistry proceeded in a related manner but, in this case, by the direct addition of 1Fc with PI(3) to yield the N,N',N″-chelated P(I) cation. These species represent the first synthesized main group complexes involving a redox active diiminopyridine ligand containing pendant ferrocenes. Electrochemical studies of the free ligand shows a reversible two-electron process. The chelated phosphorus cation, however, displayed three events, the first being a quasi-reversible two-electron process, involving the oxidation at the P(I) center, resulting in a P(III) cation. The subsequent reversible one- and two-electron processes arise from the ligand framework and pendant ferrocenes, respectively.

(Hydroxypropyl)methyl Cellulose-Chitosan Film as a Matrix for Lipase Immobilization-Part ΙΙ: Structural Studies.

The present work reports on the structural study of a film made of a hybrid blend of biopolymers used as an enzyme carrier. A cellulose derivative (HPMC) and chitosan (CS) were combined in order to formulate a film on which Mucor miehei lipase was immobilized. The film was successfully used as a biocatalyst; however, little is known about the structure of the system. Therefore, small-angle X-ray scattering, Fourier transform infrared spectroscopy (FTIR), optical microscopy, and scanning electron microscopy (SEM), as well as microindentation measurements, were used to shed light on the structure of the promising biocatalyst. Among the results, intermolecular hydrogen bonds were observed between the amide groups of the two polymers and the lipase. The presence of the enzyme does not seem to affect the mechanical properties of the matrix. The used film after 35 cycles of reaction seemed to be fatigued and had lost part of its humidity, explaining the reduction of the enzyme activity.

Bioinspired Networks of Communicating Synthetic Protocells.

The bottom-up synthesis of cell-like entities or protocells from inanimate molecules and materials is one of the grand challenges of our time. In the past decade, researchers in the emerging field of bottom-up synthetic biology have developed different protocell models and engineered them to mimic one or more abilities of biological cells, such as information transcription and translation, adhesion, and enzyme-mediated metabolism. Whilst thus far efforts have focused on increasing the biochemical complexity of individual protocells, an emerging challenge in bottom-up synthetic biology is the development of networks of communicating synthetic protocells. The possibility of engineering multi-protocellular systems capable of sending and receiving chemical signals to trigger individual or collective programmed cell-like behaviours or for communicating with living cells and tissues would lead to major scientific breakthroughs with important applications in biotechnology, tissue engineering and regenerative medicine. This mini-review will discuss this new, emerging area of bottom-up synthetic biology and will introduce three types of bioinspired networks of communicating synthetic protocells that have recently emerged.

Programmed assembly of bespoke prototissues on a microfluidic platform.

The precise assembly of protocell building blocks into prototissues that are stable in water, capable of sensing the external environment and which display collective behaviours remains a considerable challenge in prototissue engineering. We have designed a microfluidic platform that enables us to build bespoke prototissues from predetermined compositions of two types of protein-polymer protocells. We can accurately control their size, composition and create unique Janus configurations in a way that is not possible with traditional methods. Because we can control the number and type of the protocells that compose the prototissue, we can hence modulate the collective behaviours of this biomaterial. We show control over both the amplitude of thermally induced contractions in the biomaterial and its collective endogenous biochemical reactivity. Our results show that microfluidic technologies enable a new route to the precise and high-throughput fabrication of tissue-like materials with programmable collective properties that can be tuned through careful assembly of protocell building blocks of different types. We anticipate that our bespoke prototissues will be a starting point for the development of more sophisticated artificial tissues for use in medicine, soft robotics, and environmentally beneficial bioreactor technologies.