RESUMEN
Defect centers in a nanodiamond (ND) allow the detection of tiny magnetic fields in their direct surroundings, rendering them as an emerging tool for nanoscale sensing applications. Eumelanin, an abundant pigment, plays an important role in biology and material science. Here, for the first time, we evaluate the comproportionation reaction in eumelanin by detecting and quantifying semiquinone radicals through the nitrogen-vacancy color center. A thin layer of eumelanin is polymerized on the surface of nanodiamonds (NDs), and depending on the environmental conditions, such as the local pH value, near-infrared, and ultraviolet light irradiation, the radicals form and react in situ. By combining experiments and theoretical simulations, we quantify the local number and kinetics of free radicals in the eumelanin layer. Next, the ND sensor enters the cells via endosomal vesicles. We quantify the number of radicals formed within the eumelanin layer in these acidic compartments by applying optical relaxometry measurements. In the future, we believe that the ND quantum sensor could provide valuable insights into the chemistry of eumelanin, which could contribute to the understanding and treatment of eumelanin- and melanin-related diseases.
Asunto(s)
Melaninas , Nanodiamantes , Rayos Ultravioleta , Radicales LibresRESUMEN
A common obstacle of many organic semiconductors is that they show highly unipolar charge transport. This unipolarity is caused by trapping of either electrons or holes by extrinsic impurities, such as water or oxygen. For devices that benefit from balanced transport, such as organic light-emitting diodes, organic solar cells and organic ambipolar transistors, the energy levels of the organic semiconductors are ideally situated within an energetic window with a width of 2.5 eV where charge trapping is strongly suppressed. However, for semiconductors with a band gap larger than this window, as used in blue-emitting organic light-emitting diodes, the removal or disabling of charge traps poses a longstanding challenge. Here we demonstrate a molecular strategy where the highest occupied molecular orbital and lowest unoccupied molecular orbital are spatially separated on different parts of the molecules. By tuning their stacking by modification of the chemical structure, the lowest unoccupied molecular orbitals can be spatially protected from impurities that cause electron trapping, increasing the electron current by orders of magnitude. In this way, the trap-free window can be substantially broadened, opening a path towards large band gap organic semiconductors with balanced and trap-free transport.
RESUMEN
Separation and reuse of the catalytically active metal complexes are persistent issues in homogeneous catalysis. Supported Ionic Liquid Phase (SILP) catalysts, where the catalytic center is dissolved in a thin film of a stable ionic liquid, deposited on a solid support, present a promising alternative. However, the dissolution of the metal center in the film leaves little control over its position and its activity. We present here four novel, task-specific ionic liquids [FPhn ImH R]I (n=1, 2; R=PEG2 , C12 H25 ), designed to self-assemble on a silica surface without any covalent bonding and offering a metal binding site in a controlled distance to the support. Advanced multinuclear solid-state NMR spectroscopic techniques under Magic Angle Spinning, complemented by molecular dynamics (MD) simulations, allow us to determine their molecular conformation when deposited inside SBA-15 as a model silica support. We provide here conceptual proof for a rational design of ionic liquids self-assembling into thin films, opening an avenue for a second, improved generation of SILP catalysts.
RESUMEN
The development of highly luminescent two-dimensional covalent organic frameworks (COFs) for sensing applications remains challenging. To suppress commonly observed photoluminescence quenching of COFs, we propose a strategy involving interrupting the intralayer conjugation and interlayer interactions using cyclohexane as the linker unit. By variation of the building block structures, imine-bonded COFs with various topologies and porosities are obtained. Experimental and theoretical analyses of these COFs disclose high crystallinity and large interlayer distances, demonstrating enhanced emission with record-high photoluminescence quantum yields of up to 57% in the solid state. The resulting cyclohexane-linked COF also exhibits excellent sensing performance for the trace recognition of Fe3+ ions, explosive and toxic picric acid, and phenyl glyoxylic acid as metabolites. These findings inspire a facile and general strategy to develop highly emissive imine-bonded COFs for detecting various molecules.
RESUMEN
Understanding and controlling the nucleation and crystallization in solution-processed perovskite thin films are critical to achieving high in-plane charge carrier transport in field-effect transistors (FETs). This work demonstrates a simple and effective additive engineering strategy using pentanoic acid (PA). Here, PA is introduced to both modulate the crystallization process and improve the charge carrier transport in 2D 2-thiopheneethylammonium tin iodide ((TEA)2 SnI4 ) perovskite FETs. It is revealed that the carboxylic group of PA is strongly coordinated to the spacer cation TEAI and [SnI6 ]4- framework in the perovskite precursor solution, inducing heterogeneous nucleation and lowering undesired oxidation of Sn2+ during the film formation. These factors contribute to a reduced defect density and improved film morphology, including lower surface roughness and larger grain size, resulting in overall enhanced transistor performance. The reduced defect density and decreased ion migration lead to a higher p-channel charge carrier mobility of 0.7 cm2 V-1 s-1 , which is more than a threefold increase compared with the control device. Temperature-dependent charge transport studies demonstrate a mobility of 2.3 cm2 V-1 s-1 at 100 K due to the diminished ion mobility at low temperatures. This result illustrates that the additive strategy bears great potential to realize high-performance Sn-based perovskite FETs.
RESUMEN
Living organisms compartmentalize their catalytic reactions in membranes for increased efficiency and selectivity. To mimic the organelles of eukaryotic cells, we develop a mild approach for in situ encapsulating enzymes in aqueous-core silica nanocapsules. In order to confine the sol-gel reaction at the water/oil interface of miniemulsion, we introduce an aminosilane to the silica precursors, which serves as both catalyst and an amphiphilic anchor that electrostatically assembles with negatively charged hydrolyzed alkoxysilanes at the interface. The semi-permeable shell protects enzymes from proteolytic attack, and allows the transport of reactants and products. The enzyme-carrying nanocapsules, as synthetic nano-organelles, are able to perform cascade reactions when enveloped in a polymer vesicle, mimicking the hierarchically compartmentalized reactions in eukaryotic cells. This in situ encapsulation approach provides a versatile platform for the delivery of biomacromolecules.
Asunto(s)
Células Artificiales , Nanocápsulas , Agua , Catálisis , Dióxido de SilicioRESUMEN
Structurally defined graphene nanoribbons (GNRs) have emerged as promising candidates for nanoelectronic devices. Low band gap (<1â eV) GNRs are particularly important when considering the Schottky barrier in device performance. Here, we demonstrate the first solution synthesis of 8-AGNRs through a carefully designed arylated polynaphthalene precursor. The efficiency of the oxidative cyclodehydrogenation of the tailor-made polymer precursor into 8-AGNRs was validated by FT-IR, Raman, and UV/Vis-near-infrared (NIR) absorption spectroscopy, and further supported by the synthesis of naphtho[1,2,3,4-ghi]perylene derivatives (1 and 2) as subunits of 8-AGNR, with a width of 0.86â nm as suggested by the X-ray single crystal analysis. Low-temperature scanning tunneling microscopy (STM) and solid-state NMR analyses provided further structural support for 8-AGNR. The resulting 8-AGNR exhibited a remarkable NIR absorption extending up to â¼2400â nm, corresponding to an optical band gap as low as â¼0.52â eV. Moreover, optical-pump TeraHertz-probe spectroscopy revealed charge-carrier mobility in the dc limit of â¼270â cm2 â V-1 s-1 for the 8-AGNR.
RESUMEN
Apolipoproteins are an important class of proteins because they provide a so-called stealth effect to nanoparticles. The stealth effect on nanocarriers leads to a reduced unspecific uptake into immune cells and thereby to a prolonged blood circulation time. Herein, a novel strategy to bind apolipoproteins specifically on nanoparticles by adjusting the temperature during their incubation in human plasma is presented. This specific binding, in turn, allows a control of the stealth behavior of the nanoparticles. Nanoparticles with a well-defined poly(N-isopropylacrylamide) shell are prepared, displaying a reversible change of hydrophobicity at a temperature around 32 °C. It is shown by label-free quantitative liquid chromatography-mass spectrometry that the nanoparticles are largely enriched with apolipoprotein J (clusterin) at 25 °C while they are enriched with apolipoprotein A1 and apolipoprotein E at 37 °C. The temperature-dependent protein binding is found to significantly influence the uptake of the nanoparticles by RAW264.7 and HeLa cells. The findings imply that the functionalization of nanoparticles with temperature-responsive materials is a suitable method for imparting stealth properties to nanocarriers for drug-delivery.
Asunto(s)
Nanopartículas , Corona de Proteínas , Apolipoproteínas , Células HeLa , Humanos , Nanopartículas/química , Corona de Proteínas/química , TemperaturaRESUMEN
Synthesis of covalent organic frameworks (COFs) with desirable organic units furnishes advanced materials with unique functionalities. As an emerging class of two-dimensional (2D) COFs, sp2 -carbon-conjugated COFs provide a facile platform to build highly stable and crystalline porous polymers. Herein, a 2D olefin-linked COF was prepared by employing nanographene, namely, dibenzo[hi,st]ovalene (DBOV), as a building block. The DBOV-COF exhibits unique ABC-stacked lattices, enhanced stability, and charge-carrier mobility of ≈0.6â cm2 V-1 s-1 inferred from ultrafast terahertz photoconductivity measurements. The ABC-stacking structure was revealed by the high-resolution transmission electron microscopy and powder X-ray diffraction. DBOV-COF demonstrated remarkable photocatalytic activity in hydroxylation, which was attributed to the exposure of narrow-energy-gap DBOV cores in the COF pores, in conjunction with efficient charge transport following light absorption.
RESUMEN
BACKGROUND: Pre-harvest sprouting (PHS) is a major problem for wheat production due to its direct detrimental effects on wheat yield, end-use quality and seed viability. Annually, PHS is estimated to cause > 1.0 billion USD in losses worldwide. Therefore, identifying PHS resistance quantitative trait loci (QTLs) is crucial to aid molecular breeding efforts to minimize losses. Thus, a doubled haploid mapping population derived from a cross between white-grained PHS susceptible cv AAC Innova and red-grained resistant cv AAC Tenacious was screened for PHS resistance in four environments and utilized for QTL mapping. RESULTS: Twenty-one PHS resistance QTLs, including seven major loci (on chromosomes 1A, 2B, 3A, 3B, 3D, and 7D), each explaining ≥10% phenotypic variation for PHS resistance, were identified. In every environment, at least one major QTL was identified. PHS resistance at most of these loci was contributed by AAC Tenacious except at two loci on chromosomes 3D and 7D where it was contributed by AAC Innova. Thirteen of the total twenty-one identified loci were located to chromosome positions where at least one QTL have been previously identified in other wheat genotype(s). The remaining eight QTLs are new which have been identified for the first time in this study. Pedigree analysis traced several known donors of PHS resistance in AAC Tenacious genealogy. Comparative analyses of the genetic intervals of identified QTLs with that of already identified and cloned PHS resistance gene intervals using IWGSC RefSeq v2.0 identified MFT-A1b (in QTL interval QPhs.lrdc-3A.1) and AGO802A (in QTL interval QPhs.lrdc-3A.2) on chromosome 3A, MFT-3B-1 (in QTL interval QPhs.lrdc-3B.1) on chromosome 3B, and AGO802D, HUB1, TaVp1-D1 (in QTL interval QPhs.lrdc-3D.1) and TaMyb10-D1 (in QTL interval QPhs.lrdc-3D.2) on chromosome 3D. These candidate genes are involved in embryo- and seed coat-imposed dormancy as well as in epigenetic control of dormancy. CONCLUSIONS: Our results revealed the complex PHS resistance genetics of AAC Tenacious and AAC Innova. AAC Tenacious possesses a great reservoir of important PHS resistance QTLs/genes supposed to be derived from different resources. The tracing of pedigrees of AAC Tenacious and other sources complements the validation of QTL analysis results. Finally, comparing our results with previous PHS studies in wheat, we have confirmed the position of several major PHS resistance QTLs and candidate genes.
Asunto(s)
Sitios de Carácter Cuantitativo , Triticum , Mapeo Cromosómico , Genotipo , Latencia en las Plantas , Triticum/genéticaRESUMEN
Chain entanglement behaviors were studied by 1H Hahn echo nuclear magnetic resonance (NMR) and 1H double-quantum (DQ) NMR experiments. Poly(ethylene oxide) (PEO) was chosen to investigate the chain entanglement behaviors. The 1H Hahn echo NMR results demonstrate that the critical molecular weight of PEO is approximately 6 kg mol-1. Above this critical molecular weight, chain entanglements start to occur in the melts resulting in anisotropic motions of polymer chain. The 1H DQ NMR observations establish that PEO melts with molecular weights above the critical value exhibit dynamical entanglements. The entangled networks, formed by PEO with a molecular weight of 480 kg mol-1 (PEO480), present slow mobility and rather homogeneously distributed chain entanglements, while the entangled networks, formed by PEO with a molecular weight of 255 kg mol-1 (PEO255), present fast mobility and obvious dynamic heterogeneity in the distribution of chain entanglement. Short chain PEOs like that with a molecular weight of 2 kg mol-1 are demonstrated to function like solvents when being added in an appropriate concentration to PEO480, and the dilution effect increases the chain mobility of PEO480. Moreover, properly diluted PEO480 networks exhibit dynamic heterogeneity similar to that observed in PEO255.
RESUMEN
Synthetic assembly within living cells represents an innovative way to explore purely chemical tools that can direct and control cellular behavior. We use a simple and modular platform that is broadly accessible and yet incorporates highly intricate molecular recognition, immolative, and rearrangement chemistry. Short bimodular peptide sequences undergo a programmed sequence of events that can be tailored within the living intracellular environment. Each sequential stage of the pathways beginning with the cellular uptake, intracellular transport, and localization imposes distinct structural changes that result in the assembly of fibrillar architectures inside cells. The observation of apoptosis, which is characterized by the binding of Annexin V, demonstrates that programmed cell death can be promoted by the peptide assembly. Higher complexity of the assemblies was also achieved by coassembly of two different sequences, resulting in intrinsically fluorescent architectures. As such, we demonstrate that the in situ construction of architectures within cells will broaden the community's perspective toward how structure formation can impact a living system.
Asunto(s)
Péptidos/síntesis química , Células A549 , Anexina A5/química , Anexina A5/farmacología , Apoptosis/efectos de los fármacos , Humanos , Sustancias Macromoleculares/síntesis química , Sustancias Macromoleculares/química , Sustancias Macromoleculares/farmacología , Estructura Molecular , Péptidos/química , Péptidos/farmacologíaRESUMEN
The cogwheel model of hierarchical self-organization provides a route to highly ordered crystalline helical columnar hexagonal arrays of perylene bisimides (PBIs) conjugated to (3,4,5)-dimethyloctyl (racemic dm8*, r) minidendrons. Cogwheel PBIs assemble with identical structural order irrespective of molecular chirality to generate helical columns jacketed with an alkyl coat with length equal to half the helical pitch, exhibiting helical deracemization in the crystal state. These assemblies were accessible only via annealing or cooling and reheating at 1 °C/min. Recently it was discovered that hybrid rr8 sequence-defined dendrons with r and linear n-octyl (8) chains enabled the formation of the cogwheel phase at 10 °C/min upon heating but not cooling. Here we report four libraries of hybrid PBIs with sequence-defined dendrons containing r and n-alkyl (CnH2n+1) chains with n = 6, 7, 9, and 10. Structural analysis of these libraries by fiber X-ray diffraction and differential scanning calorimetry reveals that the 9r9 sequence enables an extraordinary acceleration of cogwheel assembly at rates of up to 50 °C/min on heating and cooling, providing, to the best of our knowledge, the fastest crystallizing supramolecular or covalent macromolecule known. Solid-state NMR studies help to elucidate this unexpected and unprecedented extraordinary acceleration of hierarchical self-organization, which arises from a combination of crystal packing of the ideal tertiary structure and alkyl chain dynamics. This general model raises questions about the use of achiral motifs to achieve high structural order in chiral systems and the need for disorder to create order in complex biological and bioinspired synthetic systems.
RESUMEN
Tautomerization of 2-phenylimidazolecarbaldehydes has not been studied in detail so far, although this process is a well-known phenomenon for imidazole derivatives. That is why we focus our study on a series of 2-phenylimidazolecarbaldehydes and their parent alcohols that were synthesized and studied by detailed 1H and 13C NMR in solution and in the solid state. The apparent problem is that the fast tautomerization impedes the full structural description of the compounds by conventional 13C NMR measurements. Indeed, the 13C NMR spectra in solution exhibit poor resolution, and in most cases, signals from the imidazole ring are not detectable. To avoid this problem, we used 13C CP-MAS NMR as an alternative spectroscopic method for unambiguous spectroscopic characterization of the studied series of 2-phenylimidazoles. The data were analyzed in combination with quantum chemical DFT-GIAO methods by considering the tautomerization process and the intermolecular interactions. The DFT (B3LYP/6-31G(d,p)) calculations allowed to identify and suggest the preferred tautomer in the gas phase and in DMSO solvent, which for alcohols are (2-phenyl-1H-imidazol-4-yl)methanol and its analogs, and for the aldehydes are the 2-phenyl-1H-imidazole-5-carbaldehydes. The gas-phase calculated energy differences between the two possible tautomeric forms are in the range 0.645-1.415 kcal/mol for the alcohols and 2.510-3.059 kcal/mol for the aldehydes. In the DMSO solvent, however, for all compounds, the calculated energy differences go below 1.20 kcal/mol. These data suggest that both tautomeric forms of the studied 2-phenylimidazoles can be present in solution at room temperature. Our data from detailed 2D NMR measurements in the solid state (1H-13C HETCOR and 1H-1H double-quantum coherence MAS NMR) suggested that also in the solid state both tautomers coexist in different crystalline domains. This fact does not obscure the 13C CP-MAS NMR spectra of the studied 2-phenyl substituted imidazoles and suggests this spectroscopic method as a powerful tool for a complete structural description of tautomeric systems with aromatic conjugation.
Asunto(s)
Radioisótopos de Carbono/análisis , Imidazoles/química , Imagen por Resonancia Magnética/métodos , Teoría Cuántica , Enlace de Hidrógeno , Espectroscopía de Resonancia Magnética , Estructura Molecular , Estereoisomerismo , TermodinámicaRESUMEN
Nanomaterials with highly ordered, one- or two-dimensional molecular morphologies have promising properties for adaptive materials. Here, we present the synthesis and structural characterization of dinitrohydrazone (hydz) functionalized oligodimethylsiloxanes (oDMSs) of discrete length, which form both 1- and 2D nanostructures by precisely controlling composition and temperature. The morphologies are highly ordered due to the discrete nature of the siloxane oligomers. Columnar, 1D structures are formed from the melt within a few seconds as a result of phase segregation in combination with π-π stacking of the hydrazones. By tuning the length of the siloxane, the synergy between these interactions is observed which results in a highly temperature sensitive material. Macroscopically, this gives a material that switches reversibly and fast between an ordered, solid and a disordered, liquid state at almost equal temperatures. Ordered, 2D lamellar structures are formed under thermodynamic control by cold crystallization of the hydrazones in the amorphous siloxane bulk via a slow process. We elucidate the 1- and 2D morphologies from the nanometer to molecular level by the combined use of solid state NMR and X-ray scattering. The exact packing of the hydrazone rods within the cylinders and lamellae surrounded the liquid-like siloxane matrix is clarified. These results demonstrate that controlling the assembly pathway in the bulk and with that, tuning the nanostructure dimensions and domain spacings, material properties are altered for applications in nanotechnology or thermoresponsive materials.
RESUMEN
A dendronized perylene bisimide (PBI) that self-organizes into hexagonal arrays of supramolecular double helices with identical single-crystal-like order that disregards chirality was recently reported. A cogwheel model of self-assembly that explains this process was proposed. Accessing the highly ordered cogwheel phase required very slow heating and cooling or extended periods of annealing. Analogous PBIs with linear alkyl chains did not exhibit the cogwheel assembly. Here a library of sequence-defined dendrons containing all possible compositions of linear and racemic alkyl chains was employed to construct self-assembling PBIs. Thermal and structural analysis of their assemblies by differential scanning calorimetry (DSC) and fiber X-ray diffraction (XRD) revealed that the incorporation of n-alkyl chains accelerates the formation of the high order cogwheel phase, rendering the previously invisible phase accessible under standard heating and cooling rates. Small changes to the primary structure, as constitutional isomerism, result in significant changes to macroscopic properties such as melting of the periodic array. This study demonstrated how changes to the sequence-defined primary structure, including the relocation of methyl groups between two constitutional isomers, dictate tertiary and quaternary structure in hierarchical assemblies. This led to the discovery of a sequence that self-organizes the cogwheel assembly much faster than even the corresponding homochiral compounds and demonstrated that defined-sequence, which has long been recognized as a determinant for the complex structure of biomacromolecules including proteins and nucleic acids, plays the same role also in supramolecular synthetic systems.
RESUMEN
Two perovskite-type compounds, (MA)2[B'Co(CN)6] (MA = methylammonium, B' = K(I) and Na(I)), have very similar structures, but exhibit marked differences in the phase and dielectric transitions. Solid state 2H NMR studies reveal the detailed dynamic changes of the caged methylammonium (MA) cations before and after the phase transitions, which are correlated with the different dielectric states of the compounds. Using solid state 59Co NMR, the dynamic changes of the host lattices before and after the transitions, which accompany the changes in the dynamics of the caged MA cations, are unveiled, demonstrating the intriguing interplay between the MA cations and the host lattices. On the basis of these observations, the molecular origins of the dielectric transitions are discussed in detail.
RESUMEN
Crystallographic observation of adsorbed gas molecules is a highly difficult task due to their rapid motion. Here, we report the in situ single-crystal and synchrotron powder X-ray observations of reversible CO2 sorption processes in an apparently nonporous organic crystal under varying pressures at high temperatures. The host material is formed by hydrogen bond network between 1,3,5-tris-(4-carboxyphenyl)benzene (H3BTB) and N,N-dimethylformamide (DMF) and by π-π stacking between the H3BTB moieties. The material can be viewed as a well-ordered array of cages, which are tight packed with each other so that the cages are inaccessible from outside. Thus, the host is practically nonporous. Despite the absence of permanent pathways connecting the empty cages, they are permeable to CO2 at high temperatures due to thermally activated molecular gating, and the weakly confined CO2 molecules in the cages allow direct detection by in situ single-crystal X-ray diffraction at 323 K. Variable-temperature in situ synchrotron powder X-ray diffraction studies also show that the CO2 sorption is reversible and driven by temperature increase. Solid-state magic angle spinning NMR defines the interactions of CO2 with the organic framework and dynamic motion of CO2 in cages. The reversible sorption is attributed to the dynamic motion of the DMF molecules combined with the axial motions/angular fluctuations of CO2 (a series of transient opening/closing of compartments enabling CO2 molecule passage), as revealed from NMR and simulations. This temperature-driven transient molecular gating can store gaseous molecules in ordered arrays toward unique collective properties and release them for ready use.
RESUMEN
Perylene bisimide derivatives (PBIs) are known to form only columnar or lamellar assemblies. There is no known example of a PBI self-assembling into a supramolecular sphere. Therefore, periodic and quasiperiodic arrays generated from spherical assemblies produced from PBIs are also not known. Here, a PBI functionalized at its imide groups with a second generation self-assembling dendron is reported to self-assemble into supramolecular spheres. These spheres self-organize in a body-centered cubic (BCC) periodic array, rarely encountered for self-assembling dendrons but often encountered in block copolymers. These supramolecular spheres also assemble into a columnar hexagonal array in which the supramolecular columns are unexpectedly and unprecedentedly made from spheres. At lower temperature, two additional columnar hexagonal phases consisting of symmetric and asymmetric tetrameric crowns of PBI are observed. Structural and retrostructural analysis via X-ray diffraction (XRD), molecular modeling, molecular simulation, and solid state NMR suggests that inversion of the symmetric tetrameric crowns at high temperature mediates their transformation into supramolecular spheres. The tetrameric crowns of PBIs are able to form an isotropic sphere in the cubic phase due to rapid molecular motion at high temperature, unobservable by XRD but demonstrated by solid state NMR studies. This mechanism of hierarchical self-organization of PBI into supramolecular spheres is most probably general and can be applied to other related planar molecules to generate new functions.
RESUMEN
Microencapsulation of hydrophilic therapeutic agents such as proteins or nucleotides into a nanocarrier is frequently accomplished in inverse (water-in-oil) emulsions. However, the redispersion of the nanocarriers in aqueous media often involves a complicated purification process, and the redispersion usually requires additional surfactants for its colloidal stability, which is not favored for biological applications. We propose a simple, fast, and mild method to recover hydrophilic nanocarriers prepared in inverse emulsions by temporary coating of the nanocarriers with biocompatible small molecules, so that the final aqueous dispersion of the nanocarriers can be dispersed with high recovery rate, minimal aggregation, and no additional surfactants. Such a method is termed the "cushion method" and was adopted in the preparation of chitosan nanocarriers. The nanocarriers recovered with the cushion method release encapsulated peptides in a pH-responsive manner and do not require surfactants for colloidal stabilization.