Exploring the methodological approaches of studies on radiographic databases used in cariology to feed AI: A Systematic Review.

INTRODUCTION: A growing number of studies on diagnostic imaging show superior efficiency and accuracy of computer-aided diagnostic systems compared to certified dentists. This methodological systematic review aims to evaluate the different methodological approaches used by studies focusing on machine learning and deep learning and that have used radiographic databases to classify, detect, and segment dental caries. METHODS: The protocol was registered in PROSPERO before data collection (CRD42022348097). Literature research was performed in MEDLINE, Embase, IEEE Xplore, and Web of Science until December 2022, without language restrictions. Studies and surveys using a dental radiographic database for the classification, detection, or segmentation of carious lesions were sought. Records deemed eligible were retrieved and further assessed for inclusion by two reviewers who resolved any discrepancies through consensus. A third reviewer was consulted when any disagreements or discrepancies persist between the two reviewers. After data extraction, the same reviewers assessed the methodological quality using the CLAIM and QUADAS-AI checklists. RESULTS: After screening 325 articles, 35 studies were eligible and included. The bitewing was the most commonly used radiograph (n=17) at the time when detection (n=15) was the most explored computer vision task. The sample sizes used ranged from 95 to 38437, while the augmented training set ranged from 300 to 315786. Convolutional neural network (CNN) was the most commonly used model. The mean completeness of CLAIM items was 49 % (SD ± 34%). The applicability of the CLAIM checklist items revealed several weaknesses in the methodology of the selected studies: most of the studies were monocentric, and only 9% of them used an external test set when evaluating the model's performance. The QUADAS-AI tool revealed that only 43% of the studies included in this systematic review were at low risk of bias concerning the standard reference domain. CONCLUSION: This review demonstrates that the overall scientific quality of studies conducted to feed AI algorithms is low. Some improvement in the design and validation of studies can be made with the development of a standardized guideline for the reproducibility and generalizability of results and, thus, their clinical applications.

Experimental Investigation of Dental Composites Degradation After Early Water Exposure.

While dental composite long-term aging has already been studied in the past, no data exist about the early aging while it might be detrimental regarding the composites' longevity. This study aims to better understand the effects of early water exposure on dental composites. Dental resin composites with different fillers ratio were subjected to water exposure during 24 h, 1 week, or 1 month. After photopolymerization, the samples were stored at different conditions, whether in wet or dry condition (W, D, respectively) and in wet conditions after a first 24 h storage in dry conditions (DW). Three-point bending tests were performed to measure the flexural modulus. The samples were then subjected to a sorption/desorption protocol. While the matrix alone did not undergo any mechanical degradation with exposure time, the composites matrices presented a decrease in elastic modulus. This decrease was the highest for the matrix with nonsilanized fillers. Interestingly, the DW condition was detrimental for all the samples. Regarding the sample with nonsilanized fillers in DW for 1 month presented an elastic modulus lower than the matrix alone. These results were assigned to the sorption capacity of the polymer matrix, suggesting that the diffusion mechanisms and the nature of water molecules are determinant in the composite degradation. This study showed that dental composite early degradation mechanisms after water exposure are involved in the polymer matrix postpolymerization process as soon as after 24 h. Such mechanisms are detrimental in terms of the dental composite efficiency and have to be understood.

Experimental borosilicate bioactive glasses: Pulp cells cytocompatibility and mechanical characterization.

AIM: To assess in vitro the effect of two novel phase separated borosilicate glasses (PSBS) in the system SiO2 -B2 O3 -K2 O-CaO-Al2 O3 on dental pulp cells; and to compare their bioactivity and mechanical properties to a conventional fluoroaluminosilicate glass ionomer cement namely FUJI IX. METHODOLOGY: The cytocompatibility assessment of the two novel borosilicate glasses, one without alumina (PSBS8) and one containing alumina (PSBS16), was performed on cultured primary human pulp cells. Alamar blue assay was used to assess cell metabolic activity and cell morphology was evaluated by confocal imaging. The bioactivity in Stimulated Body Fluid was also evaluated after 1 and 3 weeks of immersion using SEM-EDX analysis. Vickers microhardness and flexural strength were assessed after incorporating the glass particles into a commercial glass ionomer cement (GIC) liquid containing both polyacrylic and polybasic carboxylic acid. RESULTS: The data revealed that the two borosilicate glasses enhanced cell viability ratios at all-time points in both direct and indirect contact assays. After 3 days of contact, PSBS8 without alumina showed higher viability rate (152%) compared to the PSBS16 containing alumina (145%) and the conventional glass ionomer particles (117%). EDX analysis confirmed an initial Ca/P ratio of 2.1 for 45S5K and 2.08 for PSBS8 without alumina after 3 weeks of immersion. The cement prepared using PSBS8 showed significantly higher Vickers hardness values (p = .001) than that prepared using PSBS16 (46.6 vs. 36.7 MPa). After 24 h of maturation, PSBS8 (without alumina) exhibited a flexural strength of 12.9 MPa compared to a value of 16.4 MPa for the commercial control. PSBS8 without alumina had a higher strength than PSBS16 with alumina, after 1 and 7 days of maturation (p = .001). CONCLUSIONS: The present in vitro results demonstrated that the borosilicate bioactive glass without alumina enhanced pulp cell viability, spreading and acellular bioactivity better than the conventional GIC and the experimental borosilicate glass containing alumina.

Needs for re-intervention on restored teeth in adults: a practice-based study.

OBJECTIVES: Evaluate the need for re-intervention on dental coronal restorations in adults seen in a network of general dental practitioners (ReCOL).  MATERIALS AND METHODS: This observational, cross-sectional, multicenter study involved 40 practitioners and 400 patients. Coronal restoration failures (needing re-intervention for unsatisfactory outcomes) were assessed with a simplified rating scale of seven criteria from the FDI World Dental Federation. The oral health status, the risk factors, and Oral Health Impact Profile-14 were also examined. Previous restoration characteristics (extent, technique, material) were analyzed according to the need for re-intervention (yes/no), the age group, and the risk profile. Qualitative variables were compared between "re-intervention" and "no re-intervention" group using Fisher exact test. RESULTS: The need for re-intervention was estimated at 74% (95% CI: 70; 79); it increased with age (49 to 90%), unfavorable risk profile (82 vs. 62%), and extent of the filling (32, 39, 44, and 44% on 1, 2, 3 surfaces, and crowns, respectively). More posterior than anterior teeth were restored (median per patient: 6 vs. 1) or needed re-intervention (median per patient: 1 vs. 0). CONCLUSIONS: The needs for re-intervention in adults are still high within a context of ever-changing materials and techniques, simplified and rationalized decision-makings, and demands for patient involvement. CLINICAL RELEVANCE: Meeting these needs requires the following: (i) consensus definitions and assessment methods for "failure" and (ii) reliable feedbacks on materials, procedures, and satisfaction. Building large and detailed databases fed by networks of motivated practitioners will help analyzing complex success/failure data by artificial intelligence and guiding treatment and research.

Impact of the Microstructure of CAD/CAM Blocks on the Bonding Strength and the Bonded Interface.

PURPOSE: To investigate the relationship between the microstructure of CAD/CAM blocks and the quality of adhesion as function of the surface treatment and resin cement type. MATERIALS AND METHODS: Two nano-ceramic composite resin CAD/CAM blocks, Lava Ultimate (LU) and Cerasmart (CS), and two Leucite-reinforced glass ceramic CAD/CAM IPS blocks, Empress® CAD (EM) and InitialTM LRF (IR), received either Hydrofluoric acid (HF) or sandblasting (SB) surface treatments. The blocks were then luted using two dual-cure resin cements, LinkForce (LF) and Multilink Automix (ML) with their corresponding silanes, resulting in 16 study groups. The luted blocks were then thermal-cycling (TC) for 5000 cycles and subjected to a microtensile bond strength (µTBS) test. Scanning electron microscopy (SEM) micrographs of the treated surfaces were analyzed using ImageJ software and XRD analyses were performed for the two ceramic blocks. The data obtained were submitted to Games-Howell post-hoc nonparametric test to compare combinations of groups or treatments and a linear mixed-effects model for the factors surface treatment, block type, and resin cement, together with their first-degree interactions (α = 0.05). RESULTS: The lowest mean µTBS values were obtained with LU-HF, whereas the highest mean µTBS values were obtained with CS regardless of resin cement type and surface treatment method. IR-HF mean µTBS were significantly higher than IR-SB, EM-SB, and EM-HF. Analysis using ImageJ software demonstrated significant differences in the density and pore size after HF surface treatment. CONCLUSIONS: The specific microstructure of each block material within the same family group impacted the micromechanical retention and the bonded interface strength.

Study of tongue-palate pressure patterns during the hold phase in the production of French denti-alveolar and velar stops.

The hold phase of the stop consonants is crucial for a successful production of the release and the acoustic burst. Concurrently, it is also associated with weak acoustic energy and minimal movement, so that conventional acoustic and kinematic approaches are not relevant to investigate motor control. This paper presents an innovative experimental method to study speech motor control during this phase, based on meticulous measurement of the time variation of the mechanical pressure exerted by the tongue against the palate and also characterizing tongue-palate interaction. The concept is based on using miniature transducers with enhanced response characteristics inserted in different locations of the complete denture of edentulous subjects without perturbing the articulation. The study was done with a French-speaking adult whose maxillary denture was duplicated and mounted with six strain gauge transducers. The experiment was done with denti-alveolar and velar stop consonants with two vowel contexts. The results illustrate the potential of such device to analyse speech motor control when contact constrains tongue movements.

Cellular and collagen reference values of gingival and periodontal ligament tissues in rats: a pilot study.

Reference data are lacking on the periodontal ligament and the gingival tissue of the rat model, which would be useful for studies of new medical or biomaterial periodontal treatments. The objective of the current study was to propose cellular and collagen reference values of gingival and periodontal ligament tissues in rat, using a simple and reliable quantitative method after decalcification. Mandibular samples of ten adult Sprague-Dawley rats were used. Mild decalcification was carried out using ethylenediaminetetraacetic acid (EDTA) to preserve the morphology of tissues. Half of the samples were decalcified and the other half were not. The gingiva and the periodontal ligament were analyzed. Descriptive histology and computer-assisted image analysis were performed. The data showed that qualitatively, cellular and extracellular matrix morphologies were well preserved compared to non-decalcified periodontal soft tissue biopsies. Histomorphometrically, constitutive cellularity and the total amount of native collagen, collagen directionality and collagen anisotropy in both experimental conditions did not significantly differ. Taken together, these results suggested that EDTA decalcification did not negatively affect the studied endpoints. Moreover, this mild decalcification method allowed in situ maintenance of the periodontal soft and hard tissue integrity. The structural and compositional computerized assessment performed in the healthy periodontal soft tissue could provide reference values that will be required for future assessment on the effects of pathological, reparative and regenerative processes in rat periodontal soft tissues.

Marginal and internal fit of CAD-CAM inlay/onlay restorations: A systematic review of in vitro studies.

STATEMENT OF PROBLEM: Different parameters can influence the adaptation of computer-assisted design and computer-assisted manufacturing (CAD-CAM) inlay/onlay restorations. However, systematic reviews to identify and discuss these parameters are lacking. PURPOSE: The purpose of this systematic review was to summarize the scientific literature investigating all parameters that can influence both the marginal and internal adaptation of CAD-CAM inlay/onlay restorations. MATERIAL AND METHODS: An electronic search was conducted by 2 independent reviewers for studies published in English between January 1, 2007 and September 20, 2017 on the PubMed/MEDLINE, Scopus, and Web of Science databases and in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. Factors investigated in the selected articles included the type of CAD-CAM system, virtual space parameters, version of the software, type of block, luting procedure, type of restoration, sample size and aging procedure, evaluation method, and number of measurement points per specimen. RESULTS: A total of 162 articles were identified, of which 23 articles met the inclusion criteria. Nine studies investigated adaptation with different restorative materials, 2 evaluated adaptation according to the type of preparation design, 9 compared adaptation before/after thermomechanical loading, and 2 before/after cementation, 1 study investigated marginal adaptation based on whether the optical scan was made intraorally or extraorally, 1 compared adaptation with 5 and 3 axis CAM systems, and 1 assessed adaptation with 4 different intraoral scanners. The risk of bias was high for 7, medium for 15, and low for 1 of the studies reviewed. The high level of heterogeneity across the studies excluded meta-analysis. CONCLUSIONS: Most of the studies reported clinically acceptable values for marginal adaptation. The performance of a CAD-CAM system is influenced by the type of restorative material. A nonretentive cavity preparation exhibited better adaptation than a retentive preparation. Most studies showed that thermomechanical loading affected the quality of marginal adaptation. Cementation increased marginal discrepancies. No statistically significant difference was found for marginal fit of onlays between intraoral and extraoral optical scans using a stone die. The number of milling axes, the type of digital camera, and the region measured were statistically significant in relation to marginal/internal adaptation. Values of adaptation recorded failed to reproduce the preestablished spacer parameters in the software. Clarification is needed concerning adaptation according to the type of preparation design, the type of material, the choice of intrinsic parameters for the CAD process, the type and shape of milling instruments, and the behavior of the material during milling. Adaptation of CAD-CAM inlay/onlays should be evaluated under clinical conditions.

Bioactivity evaluation of collagen-based scaffolds containing a series of Sr-doped melt-quench derived phosphate-based glasses.

Phosphate-based glasses have been attracting attention due to their possible medical applications arising from unique dissolution characteristics in the human body leading to the possibility of new tissue regeneration. In this study, the leaching kinetics of a series of melt-quenched Sr-doped phosphate glasses are presented. Regardless of the presence of Sr, all the glasses have an initial linear and sustained release of the ions followed by a plateau. To guarantee proper nutritional support to the growing tissue during regeneration and to mimic the 3-dimensional architecture of tissues, organic scaffold systems have been developed. However, their poor mechanical strength has limited their application. To overcome this problem, cross-linkers can be used although this then limits the solubility of the materials. To succeed in dealing with such a limitation, in this paper, by freeze-drying, the aforementioned soluble melt-quenched phosphate glasses were combined as powders with collagen fibres from bovine achilles tendon to make degradable scaffolds. The scaffolds were characterized by SEM, EDX and BET. Changes to the dissolution behaviour of the glasses arising from the presence of collagen interacting with the ions leached were reported. Furthermore, the ability of the scaffolds to induce hydroxyapatite (HA) formation was evaluated: one the elaborated scaffold could grow an HA-like layer after a week in SBF. Based on the results obtained, a possible application in restorative dentistry is proposed for one or more materials.

Mechanical properties and internal fit of 4 CAD-CAM block materials.

STATEMENT OF PROBLEM: Recent polymer-based computer-assisted design and computer-assisted manufacturing (CAD-CAM) materials have been commercialized for inlay restorations, a polymer-infiltrated ceramic-network (PICN) and composite resin nanoceramics. Little independent evidence regarding their mechanical properties exists. Internal adaptation is an important factor for the clinical success and longevity of a restoration, and data concerning this parameter for inlays made with these blocks are scarce. PURPOSE: The purpose of this in vitro study was to evaluate and compare the mechanical properties (flexural strength, flexural modulus, Vickers hardness, fracture toughness) and the internal adaptation of these recent polymer-based blocks with a lithium disilicate glass-ceramic block. MATERIAL AND METHODS: The materials tested in this study were a PICN material (Vita Enamic), 2 composite resin nanoceramics (Lava Ultimate; 3M ESPE and Cerasmart; GCDental Products), and a lithium disilicate glass-ceramic (IPS e.max CAD). Mechanical properties were evaluated according to ISO norm DIS 6872:2013. Bar-shaped specimens (18×3×3 mm) were prepared and submitted to a 3-point bend test using a universal testing machine at a cross-head speed of 0.5 mm/min. In addition, identical cavities were prepared in 60 human mandibular extracted molars (n=15) and optically scanned to receive mesioocclusodistal inlays milled with the 4 materials tested in a CEREC Inlab milling machine. The replica technique and a stereomicroscope (×20) were used to measure the internal fit of the inlays at 9 preselected locations. All data were statistically analyzed using 1-way ANOVA and the post hoc Tukey multiple comparison or Games-Howell test (α=.05). RESULTS: The mean flexural strength of the tested blocks ranged from 148.7 ±9.5 MPa (Vita Enamic) to 216.5 ±28.3 MPa (Cerasmart). The mean flexural modulus ranged from 23.3 ±6.4 GPa (Vita Enamic) to 52.8 ±10.5 GPa (IPS e.max CAD). The mean Vickers hardness ranged from 0.66 ±0.02 GPa (Cerasmart) to 5.98 ±0.69 GPa (IPS e.max CAD). The mean fracture toughness ranged from 1.2 ±0.17 MPa.m1/2 (Cerasmart) to 1.8 ±0.29 MPa.m1/2 (IPS e.max CAD). The values for internal discrepancy ranged from 119 ±55 µm to 234 ±51 µm. The mean internal discrepancy was significantly higher for Lava Ultimate (P<.05) than IPS e.max CAD and Cerasmart but not for Vita Enamic. The factor ''material'' was statistically significant in relation to the mechanical properties evaluated in this study (P<.05). The Pearson correlation was negative between the flexural strength results and the internal discrepancy of the materials tested (R2=0.941; P<.05). CONCLUSIONS: The mechanical properties of the CAD-CAM block materials tested were within the acceptable range for fabrication of single restorations according to the ISO standard for ceramics (ISO 6872:2008). IPS e.max CAD and Cerasmart were observed to have superior flexural strength and better internal fit.

FTIR microscopy contribution for comprehension of degradation mechanisms in PLA-based implantable medical devices.

The integration and evolution of implantable medical devices made of bioresorbable polymers and used for temporary biomedical applications are crucial criteria in the success of a therapy and means of follow-up after implantation are needed. The objective of this work is to develop and evaluate a method based on microscopic Fourier Transform InfraRed spectroscopy (FTIR) mappings to monitor the degradation of such polymers on tissue explant sections, after implantation. This technique provided information on their location and on both their composition and crystallinity, which is directly linked to their state of degradation induced predominantly by chain scissions. An in vitro study was first performed on poly(L-lactic acid) (PLLA) meshes to validate the procedure and the assumption that changes observed on FTIR spectra are indeed a consequence of degradation. Then, mappings of in vivo degraded PLLA meshes were realized to follow up their degradation and to better visualize their degradation mechanisms. This work further warrants its translation to medical implants made of copolymers of lactic acid and to other polyesters.

Acidic pH resistance of grafted chitosan on dental implant.

Over the last decade, access to dental care has increasingly become a service requested by the population, especially in the case of dental implants. However, the major cause of implant failure is an inflammatory disease: peri-implantitis. Currently, the adhesion strength of antibacterial coatings at implant surfaces remains a problem to solve. In order to propose a functionalized implant with a resistant antibacterial coating, a novel method of chitosan immobilization at implant surface has been investigated. Functionalization of the pre-active titanium (Ti) surface was performed using triethoxysilylpropyl succinic anhydride (TESPSA) as a coupling agent which forms a stable double peptide bond with chitosan. The chitosan presence and the chemical resistibility of the coating under acid pH solutions (pH 5 and pH 3) were confirmed by FTIR-ATR and XPS analyses. Furthermore, peel test results showed high adhesive resistance of the TESPSA/chitosan coating at the substrate. Cytocompatibility was evaluated by cell morphology with confocal imaging. Images showed healthy morphology of human gingival fibroblasts (HGF-1). Finally, the reported method for chitosan immobilization on Ti surface via peptide bindings allows for the improvement of its adhesive capacities and resistibility while maintaining its cytocompatibility. Surface functionalization using the TESPSA/chitosan coupling method is noncytotoxic and stable even in drastic environments as found in oral cavity, thus making it a valuable candidate for clinical implantology applications.

Early Periimplant Tissue Healing on 1-Piece Implants With a Concave Transmucosal Design: A Histomorphometric Study in Dogs.

INTRODUCTION: The purpose of our study was to investigate the early healing phase of marginal bone and soft tissues around unloaded 1-piece implants with a concave transmucosal design, in a dog model. METHODS: Twenty-four 1-piece implants with a concave transmucosal neck were inserted 1 mm subcrestally in the mandibular ridge of 8 beagle dogs. Four animals were sacrificed after 3 and 12 weeks of healing. Histomorphometric analysis was performed to measure the height of the periimplant tissues. RESULTS AND DISCUSSION: The overall height of the periimplant mucosa was, respectively, 2.67 and 2.52 mm, after 3 and 12 weeks. In the connective tissue, a soft tissue O-ring seal was observed in the healing area provided by the transmucosal concavity, after 12 weeks. The location of the first bone-to-implant contact facing the implant shoulder was 0.00 and +0.18 mm, respectively, after 3 and 12 weeks of healing. Some bone apposition occurred on the implant shoulder during the healing. CONCLUSION: Within the limits of the present study, a concave transmucosal design in 1-piece implants was associated with a short vertical value of biological width and promoted a mechanical interlocking of the implant body at the connective tissue and marginal bone levels.

Risk factors or indicators for dental caries and tooth wear and their relative importance in adults according to age.

OBJECTIVES: To explore the risk factors for dental caries (DC) and tooth wear (TW) and assess their importance according to age in random French adult patients with >1 partial coronal restoration. METHODS: The data stem from a prospective observational multicentre cross-sectional study and were collected through interviews and clinical examinations. The study involved 96 dentists from 76 hospital and private clinics and included 822 patients. The data analysed in three age groups (18-29, 30-59, and ≥ 60). Univariate logistic regressions were performed and predictions of DC or TW described using decision trees. RESULTS: The study confirmed the major influences of oral hygiene, acceptable sugary/acidic beverage consumption and regular dental visits in reducing DC and TW. Further, it exposed age-related risk factors for DC such being a "new patient" and having an "excessive sugary/acidic beverage consumption" in the youngest adults, or "irregular dental visits" in middle-aged adults and in the oldest. CONCLUSIONS: For appropriate preventive counselling, risk factor assessment should be extensive and age- and dental history-oriented because of unexpected age-related risk factors or risk factor combinations. CLINICAL SIGNIFICANCE: These results are likely to make better-grounded new recommendations given to young adults since their first visits and throughout their dental clinical pathway.

Comparative study of two bioactive dental materials.

OBJECTIVES: New bioactive materials were introduced to not only restore the lost dental hard tissue but also to release fluoride that inhibits demineralization and occurrence of secondary caries. The current study thus aims to assess Fluoride release as well as the mechanical and physical properties of two new commercially available bioactive restorative materials. METHODS: Two materials, Cention® Forte (CF) (Ivoclar Vivadent), Surefil one™ (SO) (Denstply Sirona), were evaluated in terms of fracture toughness (FT), flexural strength (FS), flexural modulus (FM) (ISO 4049), compressive strength (CS), and Vickers hardness (VH). In addition, thermogravimetric analysis (TGA) was performed, as well as pH measurements and quantification of Fluoride release after immersion in distilled water at times of 0, 7, 14 and 21 days. The sealing ability was evaluated using silver nitrate dye penetration on natural teeth. Finally, Energy-Dispersive X-Ray Spectroscopy (EDX) was used to investigate the surface composition of the two studied material surfaces. The data were statistically analyzed using Independent T-Tests; the chosen significance level was α = 0.05. RESULTS: CF had significantly higher FT values compared to SO (p = 0.001). Also the FS results showed that CF had significantly higher values (90.11 MPa), followed by SO (22.15 MPa). The CS values showed the same order with significantly higher values for CF (231.79 MPa). While the FM and VH showed the reverse order with SO having significantly higher values than CF. pH measurements showed that CF evolved towards significantly higher pH values after 3 weeks in distilled water, while thermal properties showed more stability and higher resistance to degradation for CF compared to SO. The silver nitrate penetration results showed significantly better sealing ability for CF compared to the self-adhesive SO. Finally, EDX surface analysis results were consistent with the release profiles and confirmed the composition of the two tested materials. SIGNIFICANCE: Both materials, demonstrated enhanced Fluoride release ability, and hence good remineralisation potential in vitro that could prevent recurrent carious lesions in vivo. The composition based on acrylic polymerization showed better mechanical resistance to bending and fracture, and higher sealing ability than those based on acid base reaction.

A Multicenter Cohort Study on 301 Tissue-Level Implants: Cumulative Implant Survival Rate and Marginal Bone Level Change up to 4.5 Years.

PURPOSE: To retrospectively determine the cumulative survival rate (CSR) and marginal bone level change (ΔMBL) around novel hybrid design tissue-level (TL) dental implants that support multiple-screw-retained restorations. MATERIALS AND METHODS: Implant CSRs were analyzed at the implant and patient level using Kaplan-Meier estimates. ΔMBL was measured by comparing the periapical loading and follow-up visit radiographs using an improved standardized digital methodology based on image gray levels. ΔMBL outcomes were subject to linear mixed regression to identify potential risk factors. RESULTS: A total of 301 TL implants in 69 patients with an average age of 62.6 ± 11.7 years (range: 36 to 87 years) at the time of implant placement were considered for the analysis. All 301 implants were successfully restored and loaded. The 54-month CSRs at the implant and patient levels were 98.9% (95% CI: 96.7 to 99.6) and 95.3% (95% CI: 86.1 to 98.5), respectively. ΔMBL after a mean follow-up of 22 ± 10.7 months after loading was 0.00 ± 0.57 mm. None of the implant sites showed marginal bone loss exceeding 1.5 mm. Multivariate regression analysis revealed a significant association between ΔMBL and the loading protocol (P = .027) but not between ΔMBL and age or transgingival height. CONCLUSIONS: The high CSRs and stable peri-implant marginal bone levels support the use of recent TL implants, which have a hybrid design inherited from the bone-level implant-abutment connection, as a suitable treatment option for restoring partially or fully edentulous patients with a good mid-term prognosis. These results should be complemented by further prospective studies in a real-world multicenter private practice setup that represents the daily realities of implant treatment.

Development of Chlorhexidine-loaded Lipid Nanoparticles Incorporated in a Bioceramic Endodontic Sealer.

INTRODUCTION: This study aimed to assess BioRoot RCS (BR) incorporating liposomal chlorhexidine digluconate (CHX) for its antibacterial activity, drug release capacity, and physicochemical properties. METHODS: Drug release of CHX liposomal formulations in combination with BR was evaluated spectrophotometrically and through mathematical release models for 30 days. A selected combination was evaluated for antimicrobial properties against Enterococcus faecalis biofilm growth on human dentin. Cytotoxicity was assessed following the ISO 10993-5:2019 standard on days 1, 3, and 7. Physicochemical properties were evaluated through setting time, Fourier transform infrared spectroscopy, solubility, contact angle, and film thickness. RESULTS: From BR, liposomal CHX released up to 7-fold higher CHX than CHX solution (P < .05), following a triphasic drug release pattern compared to the CHX solution, which followed a quasi-Fickian diffusion. BR combined with a selected liposomal CHX completely inhibited E. faecalis biofilm growth compared to the combination of BR with CHX solution and the control group (P < .05). Liposomal CHX decreased the contact angle (P < .05) and solubility but increased cytotoxicity (P < .05) of BR, staying above the ISO threshold. None of the other physicochemical characteristics tested differed from BR (P > .05). CONCLUSION: This liposomal formulation improved CHX release from BR, enhancing the antibacterial effectiveness. It presents a promising approach for local antibiofilm therapy in endodontics without substantially altering the physicochemical characteristics of BR.

SARS-CoV-2 infection prevalence and associated factors among primary healthcare workers in France after the third COVID-19 wave.

Data on the SARS-CoV-2 infection among primary health care workers (PHCWs) are scarce but essential to reflect on policy regarding prevention and control measures. We assessed the prevalence of PHCWs who have been infected by SARS-CoV-2 in comparison with modeling from the general population in metropolitan France, and associated factors. A cross-sectional study was conducted among general practitioners (GPs), pediatricians, dental and pharmacy workers in primary care between May and August 2021. Participants volunteered to provide a dried-blood spot for SARS-CoV-2 antibody assessment and completed a questionnaire. The primary outcome was defined as the detection of infection-induced antibodies (anti-nucleocapsid IgG, and for non-vaccinees: anti-Spike IgG and neutralizing antibodies) or previous self-reported infection (positive RT-qPCR or antigenic test, or positive ELISA test before vaccination). Estimates were adjusted using weights for representativeness and compared with prediction from the general population. Poisson regressions were used to quantify associated factors. The analysis included 1612 PHCWs. Weighted prevalences were: 31.7% (95% CI 27.5-36.0) for GPs, 28.7% (95% CI 24.4-33.0) for pediatricians, 25.2% (95% CI 20.6-31.0) for dentists, and 25.5% (95% CI 18.2-34.0) for pharmacists. Estimates were compatible with model predictions for the general population. PHCWs more likely to be infected were: GPs compared to pharmacist assistants (adjusted prevalence ratio [aPR] = 2.26; CI 95% 1.01-5.07), those living in Île-de-France (aPR = 1.53; CI 95% 1.14-2.05), South-East (aPR = 1.57; CI 95% 1.19-2.08), North-East (aPR = 1.81; CI 95% 1.38-2.37), and those having an unprotected contact with a COVID-19 case within the household (aPR = 1.48; CI 95% 1.22-1.80). Occupational factors were not associated with infection. In conclusion, the risk of SARS-CoV-2 exposure for PHCWs was more likely to have occurred in the community rather than at their workplace.

Toxicity evaluation of two dental composites: three-dimensional confocal laser scanning microscopy time-lapse imaging of cell behavior.

The purpose of this study was to investigate the in vitro biocompatibility of two dental composites (namely A and B) with similar chemical composition used for direct restoration using three-dimensional confocal laser scanning microscopy (CLSM) time-lapse imaging. Time-lapse imaging was performed on cultured human HGF-1 fibroblast-like cells after staining using Live/Dead®. Image analysis showed a higher mortality rate in the presence of composite A than composite B. The viability rate decreased in a time-dependent manner during the 5 h of exposure. Morphological alterations were associated with toxic effects; cells were enlarged and more rounded in the presence of composite A as shown by F-actin and cell nuclei staining. Resazurin assay was used to confirm the active potential of composites in cell metabolism; results showed severe cytotoxic effects in the presence of both no light-curing composites after 24 h of direct contact. However, extracts of polymerized composites induced a moderate decrease in cell metabolism after the same incubation period. Composite B was significantly better tolerated than composite A at all investigated end points and all time points. The finding confirmed that the used CLSM method was sufficiently sensitive to differentiate the biocompatibility behavior of two composites based on similar methacrylate monomers.

3D Electrospun Polycaprolactone Scaffolds to Assess Human Periodontal Ligament Cells Mechanobiological Behaviour.

While periodontal ligament cells are sensitive to their 3D biomechanical environment, only a few 3D in vitro models have been used to investigate the periodontal cells mechanobiological behavior. The objective of the current study was to assess the capability of a 3D fibrous scaffold to transmit a mechanical loading to the periodontal ligament cells. Three-dimensional fibrous polycaprolactone (PCL) scaffolds were synthetized through electrospinning. Scaffolds seeded with human periodontal cells (103 mL-1) were subjected to static (n = 9) or to a sinusoidal axial compressive loading in an in-house bioreactor (n = 9). At the end of the culture, the dynamic loading seemed to have an influence on the cells' morphology, with a lower number of visible cells on the scaffolds surface and a lower expression of actin filament. Furthermore, the dynamic loading presented a tendency to decrease the Alkaline Phosphatase activity and the production of Interleukin-6 while these two biomolecular markers were increased after 21 days of static culture. Together, these results showed that load transmission is occurring in the 3D electrospun PCL fibrous scaffolds, suggesting that it can be used to better understand the periodontal ligament cells mechanobiology. The current study shows a relevant way to investigate periodontal mechanobiology using 3D fibrous scaffolds.