RESUMEN
Laser-induced damage growth on the exit surface of fused silica optics triggered by nanosecond pulses at 351 nm is widely described with exponential dynamics. In this Letter, a particular experimental setup allowed us to study damage growth with a large beam and fluences near damage growth threshold for a high number of shots. This allowed us to observe and characterize a regime with a slow and linear growth dynamic not documented in the literature and yet fundamental for the operation of high-power laser installations.
RESUMEN
In laser damage experiments, damage initiation and growth are typically monitored by imaging the surface of the tested fused silica sample, ignoring their bulk morphology. The depth of a damage site in fused silica optics is considered to be proportional to its equivalent diameter. However, some damage sites experience phases with no diameter changes but growth in the bulk independently from their surface. A proportionality relationship with the damage diameter does not accurately describe the growth of such sites. In the following, an accurate estimator for damage depth is proposed, which is based on the hypothesis that the light intensity scattered by a damage site is proportional to its volume. Such an estimator, using the pixel intensity, describes the change of damage depth through successive laser irradiations, including phases in which depth and diameter variations are uncorrelated.
RESUMEN
Molecular machines and responsive materials open a plethora of new opportunities in nanotechnology. We present an oriented crystalline array of diarylethene (DAE)-based photoactuators, arranged in a way to yield an anisotropic response. The DAE units are assembled, together with a secondary linker, into a monolithic surface-mounted metal-organic framework (SURMOF) film. By Infrared (IR) and UV/Vis spectroscopy as well as by synchrotron X-ray diffraction, we show that the light-induced extension changes of the molecular DAE linkers multiply to yield mesoscopic and anisotropic length changes. Due to the special architecture and substrate-bonding of the SURMOF, these length changes are transferred to the macroscopic scale, leading to the bending of a cantilever and performing work. This research shows the potential of assembling light-powered molecules into SURMOFs to yield photoactuators with a directed response, presenting a path to advanced actuators.
RESUMEN
Achieving high values for proton conductivity in a material critically depends on providing hopping sites arranged in a regular fashion. Record values reported for regular, molecular crystals cannot yet be reached by technologically relevant systems, and the best values measured for polymer membranes suited for integration into devices are almost two orders of magnitude lower. Here, an alternative polymer membrane synthesis strategy based on the chemical modification of surface-mounted, monolithic, crystalline metal-organic framework thin films is demonstrated. Due to chemical crosslinking and subsequent removal of metal ions, these surface-mounted gels (SURGELs) are found to exhibit high proton conductivity (0.1 S cm-1 at 30 °C and 100% RH (relative humidity). These record values are attributed to the highly ordered polymer network structure containing regularly spaced carboxylic acid side groups. These covalently bound organic frameworks outperform conventional, ion-conductive polymers with regard to ion conductivity and water stability. Pronounced water-induced swelling, which causes severe mechanical instabilities in commercial membranes, is not observed.
Asunto(s)
Membranas Artificiales , Polímeros/química , Protones , Agua/química , Ácidos Carboxílicos/química , Conductividad Eléctrica , Técnicas Electroquímicas , Geles/química , Microscopía de Fuerza Atómica , Nanoporos/ultraestructura , Tecnicas de Microbalanza del Cristal de CuarzoRESUMEN
Reversible remote-controlled switching of the properties of nanoporous metal-organic frameworks (MOFs) is enabled by incorporating photoswitchable azobenzene. The interaction of the host material with different guest molecules, which is crucial for all applications, is precisely studied using thin MOF films of the type Cu2 (BDC)2 (AzoBipyB). A molecule-specific effect of the photoswitching, based on dipole-dipole interactions, is found.
Asunto(s)
Metales/química , Compuestos Orgánicos/química , Adsorción , Fotoquímica , Tecnicas de Microbalanza del Cristal de Cuarzo , Espectrofotometría Ultravioleta , Difracción de Rayos XRESUMEN
The activation barrier for cis-to-trans isomerization is a key parameter for governing the properties of photoswitchable molecules. This quantity can be computed by using theoretical methods, but experimental determination is not straightforward. Photoswitchable molecules typically do not change their conformation in the pure crystalline state. When the molecules are in solution, the switching is affected by the viscosity and polarity of the solvent and when embedded in polymers, the conformational change is affected by the polymer matrix. Here, we describe a novel approach where the photoswitchable group is integrated in a highly crystalline, porous molecular framework. Sufficiently large pore sizes in such metal-organic frameworks, MOFs, allow unhindered switching and the strictly periodic structure of the lattice eliminates virtually all contributions from inhomogeneities. Using IR spectroscopy to probe the conformational state of azobenzene, the energy barrier separating the cis and the trans state could be determined by an Arrhenius analysis of the data accumulated in a temperature regime between 314 K and 385 K. The result, 1.09 ± 0.09 eV, is in very good agreement with the activation energy reported for the thermal cis-to-trans isomerization of free azobenzene as computed by DFT calculations.
Asunto(s)
Compuestos Azo/química , Compuestos Organometálicos/química , Teoría Cuántica , EstereoisomerismoRESUMEN
In this article, we use the popular photoswitchable molecule, azobenzene, to demonstrate that the embedding in a nanoporous, crystalline solid enables a precise understanding of light-induced, reversible molecular motion. We investigate two similar azobenzene-containing, pillared-layer metal-organic frameworks (MOFs): Cu2(AzoBPDC)2(BiPy) and Cu2(NDC)2(AzoBiPy). Experimental results from UV-vis spectroscopy and molecular uptake experiments as well as theoretical results based on density-functional theory (DFT) show that in the Cu2(AzoBPDC)2(BiPy) MOF structure, the azobenzene side groups undergo photoisomerization when irradiated with UV or visible light. In a very similar MOF structure, Cu2(NDC)2(AzoBiPy), the experimental studies show an unexpected absence of photoisomerization. The DFT calculations reveal that in both MOFs the initial and final states of the photoswitching process (the trans and the cis conformation) have similar energies, which strongly suggests that the reason for the effective blocking of photoswitching in the AzoBiPy-based MOFs must be related to the switching process itself. More detailed calculations show that in Cu2(NDC)2(AzoBiPy) a naphthalene linker from the molecular framework blocks the photoisomerization trajectory which leads from the trans to the cis conformation. For Cu2(AzoBPDC)2(BiPy), as a result of the different geometry, such a steric hindrance is absent.
Asunto(s)
Compuestos Azo/química , Compuestos Azo/efectos de la radiación , Modelos Químicos , Nanopartículas/química , Nanopartículas/ultraestructura , Nanoporos/ultraestructura , Simulación por Computador , Reactivos de Enlaces Cruzados/química , Reactivos de Enlaces Cruzados/efectos de la radiación , Cristalización , Isomerismo , Luz , Ensayo de Materiales , Simulación de Dinámica Molecular , Nanopartículas/efectos de la radiaciónRESUMEN
We report the fabrication of 3D, highly porous, covalently bound polymer films of homogeneous thickness. These surface-bound gels combine the advantages of metal-organic framework (MOF) materials, namely, the enormous flexibility and the large size of the maximum pore structures and, in particular, the possibility to grow them epitaxially on modified substrates, with those of covalently connected gel materials, namely, the absence of metal ions in the deposited material, a robust framework consisting of covalent bonds, and, most importantly, pronounced stability under biological conditions. The conversion of a SURMOF (surface-mounted MOF) yields a surface-grafted gel. These SURGELs can be loaded with bioactive compounds and applied as bioactive coatings and provide a drug-release platform in in vitro cell culture studies.
Asunto(s)
Geles/química , Compuestos Organometálicos/química , Bacterias , Química Clic , Cobre/química , Reactivos de Enlaces Cruzados/química , Microscopía de Fuerza Atómica , Tamaño de la Partícula , Porosidad , Propiedades de SuperficieRESUMEN
In this work, we demonstrate that strain-promoted azide-alkyne cycloaddition (SPAAC) yields virtually complete conversion in the context of the post-synthetic modification (PSM) of metal-organic frameworks (MOFs). We use surface-anchored MOF (SURMOF) thin films, [Zn2(N3-bdc)2(dabco)], grown on modified Au substrates using liquid-phase epitaxy (LPE) as a model system to first show that, with standard click chemistry, presently, the most popular method for rendering additional functionality to MOFs via PSM, quantitative conversion yields, cannot be reached. In addition, it is virtually impossible to avoid contaminations of the product by the cytotoxic Cu(I) ions used as a catalyst, a substantial problem for applications in life sciences. Both problems could be overcome by SPAAC, where a metal catalyst is not needed. After optimization of reaction conditions, conversion yields of nearly 100% could be achieved. The consequences of these results for various applications of PSM-modified SURMOFs in the fields of membranes, optical coatings, catalysis, selective gas separation, and chemical sensing are briefly discussed.
Asunto(s)
Química Clic , Compuestos Organometálicos/química , Zinc/química , Compuestos Bicíclicos Heterocíclicos con Puentes/química , Catálisis , Técnicas de Química Sintética , Cobre/química , Colorantes Fluorescentes/química , Compuestos Organometálicos/síntesis química , HumectabilidadRESUMEN
High-energy lasers have benefited from intense efforts to bring light-matter interactions to new standards and to achieve laser fusion ignition. One of the main issues to further increasing laser energy is the resistance of optical materials to high laser fluences, in particular at the final stage of the laser beamline where nonlinear Kerr effects can occur in optical materials and provoke laser filamentation. One promising way to mitigate this process is to reduce the nonlinear susceptibility of the material by switching the polarization from a linear to a circular state. Here, we report a significant reduction in the laser filamentation effect on glass by using a full-silica metamaterial waveplateable to switch the linear-to-circular polarization of high fluence laser beams. This result is achieved through the use of a large size full-silica meta-optics exhibiting nominal polarization conversion associated with an excellent transmission efficiency and wavefront quality, as well as a high laser damage resistance.
RESUMEN
Among neurodegenerative pathologies affecting the older population, Alzheimer's disease is the most common type of dementia and leads to neurocognitive and behavioral disorders. It is a complex and progressive age-related multifactorial disease characterized by a series of highly interconnected pathophysiological processes. Within the last decade, the multitarget-directed ligand strategy has emerged as a viable approach to developing complex molecules that exhibit several pharmacophores which can target the different enzymes and receptors involved in the pathogenesis of the disease. Herein, we focus on using multicomponent reactions such as Hantzsch, Biginelli and Ugi to develop these biologically active multitopic ligands.
Asunto(s)
Enfermedad de Alzheimer , Humanos , Ligandos , Inhibidores de la ColinesterasaRESUMEN
Bioinspiration has emerged as an important design principle in the rapidly growing field of materials science and especially its subarea, soft matter science. For example, biological cells form hierarchically organized tissues that not only are optimized and designed for durability, but also have to adapt to their external environment, undergo self-repair, and perform many highly complex functions. Being able to create artificial soft materials that mimic those highly complex functions will enable future materials applications. Herein, soft matter technologies that are used to realize bioinspired material structures are described, and potential pathways to integrate these into a comprehensive soft matter research environment are addressed. Solutions become available because soft matter technologies are benefitting from the synergies between organic synthesis, polymer chemistry, and materials science.
RESUMEN
Modular synthesis of structurally diverse functionalized azobiphenyls and azoterphenyls for the realization of optically switchable materials has been described. The corresponding synthesis of azobiphenyls and azoterphenyls by stepwise Mills/Suzuki-Miyaura cross-coupling reaction, proceeds with high yields and provides facile access to a library of functionalized building blocks. The synthetic methods described herein allow combining several distinct functional groups within a single unit, each intended for a specific task, such as 1) the -N=N- azobenzene core as a photoswitchable moiety, 2) aryls and heteroaryls, functionalized with carboxylic acids or pyridine at its peripheries, as coordinating moieties and 3) varying substitution, size and length of the backbone for adaptability to specific applications. These specifically designed azobiphenyls and azoterphenyls provide modular bricks, potentially useful for the assembly of a variety of polymers, molecular containers and coordination networks, offering a high degree of molecular functionality. Once integrated into materials, the azobenzene system, as a side group on the organic linker backbone, can be exploited for remotely controlling the structural, mechanical or physical properties, thus being applicable for a broad variety of 'smart' applications.
RESUMEN
A chiral photoswitchable nanoporous material with remote-controllable enantioselective adsorption capacity is presented. This metal-organic framework possesses both homochiral d-camphoric acid and light-responsive azobenzene moieties. Although the structure at the chiral moieties is unaffected, the trans-cis-azobenzene-photoisomerization changes the pore environment and, thus, switches the enantioselective adsorption behavior of the homochiral MOF.
RESUMEN
This paper discusses the potential of polymer networks, templated by crystalline metal-organic framework (MOF), as novel selective layer material in thin film composite membranes. The ability to create mechanically stable membranes with an ultra-thin selective layer of advanced polymer materials is highly desirable in membrane technology. Here, we describe a novel polymeric membrane, which is synthesized via the conversion of a surface anchored metal-organic framework (SURMOF) into a surface anchored gel (SURGEL). The SURGEL membranes combine the high variability in the building blocks and the possibility to control the network topology and membrane thickness of the SURMOF synthesis with high mechanical and chemical stability of polymers. Next to the material design, the transfer of membranes to suitable supports is also usually a challenging task, due to the fragile nature of the ultra-thin films. To overcome this issue, we utilized a porous support on top of the membrane, which is mechanically stable enough to allow for the easy membrane transfer from the synthesis substrate to the final membrane support. To demonstrate the potential for gas separation of the synthesized SURGEL membranes, as well as the suitability of the transfer method, we determined the permeance for eight gases with different kinetic diameters.
RESUMEN
Metal-organic frameworks offer tremendous potential for efficient separation of molecular mixtures. Different pore sizes and suitable functionalizations of the framework allow for an adjustment of the static selectivity. Here we report membranes which offer dynamic control of the selectivity by remote signals, thus enabling a continuous adjustment of the permeate flux. This is realized by assembling linkers containing photoresponsive azobenzene-side-groups into monolithic, crystalline membranes of metal-organic frameworks. The azobenzene moieties can be switched from the trans to the cis configuration and vice versa by irradiation with ultraviolet or visible light, resulting in a substantial modification of the membrane permeability and separation factor. The precise control of the cis:trans azobenzene ratio, for example, by controlled irradiation times or by simultaneous irradiation with ultraviolet and visible light, enables the continuous tuning of the separation. For hydrogen:carbon-dioxide, the separation factor of this smart membrane can be steplessly adjusted between 3 and 8.
RESUMEN
Uptake experiments in thin films of isoreticular chiral MOFs of type Cu2(Dcam)2(L) with identical stereogenic centers but different pore dimensions show that the enantioselectivity is significantly influenced by the pore size. The highest selectivity was found for medium pore sizes, roughly corresponding to the extension of the chiral guest molecule, limonene.
Asunto(s)
Complejos de Coordinación/química , Cobre/química , Adsorción , Complejos de Coordinación/síntesis química , Porosidad , EstereoisomerismoRESUMEN
Functionalized 4,4'-biphenyldicarboxylic acid molecules with additional amine, alkyne, azide or nitro groups were prepared and applied in the synthesis of novel metal-organic frameworks and mixed-linker metal-organic frameworks isoreticular to DUT-5. The properties of the frameworks could be tuned by varying the number of functional groups in the materials and the amine groups were employed in post-synthetic modification reactions without changing the framework structure or significantly decreasing the porosity of the materials.
Asunto(s)
Alquinos/química , Aminas/química , Azidas/química , Compuestos de Bifenilo/química , Ácidos Dicarboxílicos/química , Metales/química , Compuestos Organometálicos/síntesis química , Estructura Molecular , Porosidad , Propiedades de SuperficieRESUMEN
The controlled synthesis of hierarchically functionalized core/multishell particles is highly desirable for applications in medicine, catalysis, and separation. Here, we describe the synthesis of hierarchically structured metal-organic framework multishells around magnetic core particles (magMOFs) via layer-by-layer (LbL) synthesis. The LbL deposition enables the design of multishell systems, where each MOF shell can be modified to install different functions. Here, we used this approach to create controlled release capsules, in which the inner shell serves as a reservoir and the outer shell serves as a membrane after postsynthetic conversion of the MOF structure to a polymer network. These capsules enable the controlled release of loaded dye molecules, depending on the surrounding media.
Asunto(s)
Portadores de Fármacos/química , Imanes/química , Nanopartículas/química , Nanotecnología/métodos , Compuestos Organometálicos/química , Polímeros/química , Cápsulas , Técnicas de Química Sintética , Colorantes/química , Preparaciones de Acción Retardada , Portadores de Fármacos/síntesis química , Modelos Moleculares , Conformación Molecular , Compuestos Organometálicos/síntesis químicaRESUMEN
The remote control of surface properties is one of the key challenges in interfacial systems chemistry. Here, we report the realization of a SURMOF (surface-mounted metal-organic framework)-based hybrid system in which a crucial component can be switched by light. The realization of this two-component system is made possible by installing vertical compositional gradients via liquid-phase epitaxy. After loading the porous coating with guest molecules, its release is initiated by illumination with visible light and monitored by a quartz crystal microbalance.