Electro-Induced Phase Transformation of a Conductive Metal-Organic Framework Film for Nonlinear Optical Switching.

Achieving metal-organic frameworks (MOFs) with nonlinear optical (NLO) switching is profoundly important. Herein, the conductive MOFs Cu-TCNQ phase I (Ph-I) and phase II (Ph-II) films were prepared using the liquid-phase-epitaxial layer-by-layer spin-coating method and steam heating method, respectively. Electronic experiments showed that the Ph-II film could be changed into the Ph-I film under an applied electric field. The third-order NLO results revealed that the Ph-I film had a third-order nonlinear reverse saturation absorption (RSA) response and the Ph-II film displayed a third-order nonlinear saturation absorption (SA) response. With increases in the heating time and applied voltage, the third-order NLO response realized the reversible transition between SA and RSA. The theoretical calculations indicated that Ph-I possessed more interlayer charge transfer, resulting in a third-order nonlinear RSA response that was stronger than that of Ph-II. This work applies phase-transformed MOFs to third-order NLO switching and provides new insights into the nonlinear photoelectric applications of MOFs.

Topochemical Polymerization at Diacetylene Metal-Organic Framework Thin Films for Tuning Nonlinear Optics.

Developing the topochemical polymerization of metal-organic frameworks (MOFs) is of pronounced significance for expanding their functionalities but is still a challenge on third-order nonlinear optics (NLO). Here, we report diacetylene MOF (CAS-1-3) films prepared using a stepwise deposition method and film structural transformation approach, featuring dynamic structural diversity. The MOF structures were determined by the three-dimensional electron diffraction (3D ED) method from nanocrystals collected from the films, which provides a reliable strategy for determining the precise structure of unknown MOF films. We demonstrate the well-aligned diacetylene groups in the MOFs can promote topological polymerization to produce a highly conjugated system under thermal stimulation. As a result, the three MOF films have distinct NLO properties: the CAS-1 film exhibits saturable absorption (SA) while CAS-2 and CAS-3 films exhibit reverse saturable absorption (RSA). Interestingly, due to the topochemical polymerization of the MOF films, a transition from SA to RSA response was observed with increasing temperatures, and the optical limiting effect was significantly enhanced (∼46 times). This study provides a new strategy for preparing NLO materials and thermally regulation of nonlinear optics.

Chiral Liquid Crystalline Metal-Organic Framework Thin Films for Highly Circularly Polarized Luminescence.

Combining metal-organic frameworks (MOFs) with liquid crystals to construct liquid crystalline MOFs (LCMOF) offers the advantage of endowing and enhancing their functionality, yet it remains a challenging task. Herein, we report chiral liquid crystalline MOF (CLCMOF) thin films by cross-linking the chiral liquid crystals (CLC) with MOF thin films to realize highly circular polarization luminescence (CPL) performance with photo and thermal switching. By layer by layer cross-linking stilbene-containing CLC with stilbene-based MOF (CLC/MOF) thin film, the CLCMOF thin films were successfully obtained after UV irradiation due to the abundant [2 + 2] photocycloaddition. The resulted CLCMOF thin films have strong chirality, obvious photochromic fluorescent, and strong CPL performance (the asymmetry factor reaches to 0.4). Furthermore, due to the photochromic fluorescent MOF and thermotropic CLC, the CPL can be reversed and red-shifted after heating and UV irradiation treatment, showing photo- and thermal CPL switching. Such MOF-based CPL thin films with photo/thermal CPL switching were prepared to patterns and codes for the demonstration of potential application in advanced information anticounterfeit and encryption. This study not only opens a strategy for developing chiral thin films combining MOFs and liquid crystals but also offers a new route to achieve CPL switching in optical applications.

In-Situ Formed Electron Inhibitor Enabling Dendrite-free Garnet Electrolytes: A Case Study of Fumed Silica.

Ta-doped Li7La3Zr2O12 (LLZTO) solid-state electrolytes (SEs) show great promise for solid-state batteries due to its high conductivity and safety. However, one of the challenges it faces is lithium dendrite propagation upon long-term cycling. To address this issue, we propose the incorporation of fumed silica (FS) at the grain boundaries of LLZTO to modify the properties of the garnet pellet, which effectively inhibits the dendrite growth. The introduction of FS has demonstrated several beneficial effects. Firstly, it reduces the migration barrier of lithium ions, which helps prevent dendrite formation and propagation. Additionally, FS reduces the electronic conductivity of the SEs pellet, suppressing the dendrite formation. Moreover, the formed lithium silicates from FS might also be acted as electron inhibitor, thus inhibiting the lithium dendrite growth upon cycling. By investigating the use of FS as a modifier in LLZTO-based electrolytes, our study contributes to advancing dendrite-free solid-state electrolytes and thus the development of high-performance all-solid-state batteries.

Layer by Layer Spraying Fabrication of Aggregation-Induced Emission Metal-Organic Frameworks Thin Film.

The development of new metal-organic frameworks (MOFs) thin films is important for expanding their functions and applications. Herein, we first report a new kind of MOF thin film by using aggregation-induced emission (AIE) dicarboxyl ligand through a liquid-phase epitaxial (LPE) layer-by-layer (LBL) spraying method (named AIE surface-coordinated metal-organic frameworks thin film, AIE-SURMOF). The obtained AIE-SURMOF Zn4O(TPE)3 (ZnTPE) has highly growth orientation and homogeneous thin film, showing strong fluorescent property. Furthermore, by loading chiral guest in the MOF pore, the formed chiral encapsulated AIE-SURMOF can clearly indicate obvious circularly polarized luminescence performance with glum of 0.01. This study provides new MOF thin film and new strategy for expanding function and application of MOF materials.

Coordination-Induced Symmetry Breaking on Metal-Porphyrinic Framework Thin Films for Enhanced Nonlinear Optical Limiting.

Structural asymmetry affecting the nonlinear optics (NLO) of metal-organic frameworks (MOFs) is very important in fundamentals and applications but is still a challenge. Herein we develop a series of indium-porphyrinic framework (InTCPP) thin films and provide the first study on the coordination-induced symmetry breaking on their third-order NLO. The continuous and oriented InTCPP(H2) thin films were grown on quartz substrates and then postcoordinated with different cations (Fe2+ or Fe3+Cl-) in InTCPP(H2) (named InTCPP(Fe2+) and InTCPP(Fe3+Cl-)). The third-order NLO results reveal the Fe2+ and Fe3+Cl- coordinated InTCPP thin films have substantially enhanced NLO performance. Moreover, InTCPP(Fe3+Cl-) thin films cause symmetry breaking of microstructures, resulting in a 3-fold increase in the nonlinear absorption coefficient (up to 6.35 × 10-6 m/W) compared to InTCPP(Fe2+). This work not only develops a series of nonlinear optical MOF thin films but also provides new insight into symmetry breaking on MOFs for nonlinear optoelectronic applications.

Highly Efficient Light Helicity Detection of Enantiomers by Chiral Metal-Organic Framework Thin Films.

The potential of chiral metal-organic frameworks (MOFs) for circularly polarized (CP) optics has been largely unexplored. Herein, we have successfully deposited monolithic and highly oriented chiral MOF thin films prepared by a layer-by-layer method (referred to as surface-coordinated MOF thin films, SURMOF) to fabricate CP photodetection devices and distinguish enantiomers. The helicity-sensitive absorption induced by a pair of enantiopure oriented SURMOF was found to be excellent, with an anisotropy factor reaching 0.41. Moreover, the chiral SURMOFs exhibited a pronounced difference in the uptake of the l- and d-tryptophan enantiomers. To demonstrate the potential of these novel MOF thin films for chirality analysis, we fabricated a portable sensor device that allows for chiral recognition by monitoring the photocurrent signals. Our findings not only introduce a new concept of using chiral building blocks for realizing direct CP photodetectors but also provide a blueprint for novel devices in chiral optics.

Host-Guest Metal-Organic Frameworks-Based Long-Afterglow Luminescence Materials.

Long-afterglow materials have a broad of applications in optoelectronic devices, sensors, medicine and other fields due to their excellent luminescent properties. The host-guest long-afterglow MOFs material combines the advantages of multi-component characteristics and the stability of MOFs, which improves its luminous performance and expands its other properties. This review introduces the classification, synthesis and application of host-guest MOFs materials with long afterglow. Due to their rigid frames and multi-channel characteristics, MOFs can load common guest materials including rare earth metals, organic dyes, carbon dots, etc. The synthesis methods of loading guest materials into MOFs include solvothermal synthesis, post-encapsulation, post-modification, etc. Those long-afterglow host-guest MOFs have a wide range of applications in the fields of sensors, information security and biological imaging.

Maternal supplementation with konjac glucomannan improves maternal microbiota for healthier offspring during lactation.

BACKGROUND: The maternal diet during gestation and lactation affects the health of the offspring. Konjac glucomannan (KGM) is a significantly functional polysaccharide in food research, possessing both antioxidant and prebiotic properties. However, the mechanisms of how KGM regulates maternal nutrition remain insufficient and limited. This study aimed to investigate maternal supplementation with KGM during late gestation and lactation to benefit both maternal and offspring generations. RESULTS: Our findings indicate that KGM improves serum low density lipoprotein cholesterol (LDL-C) and antioxidant capacity. Furthermore, the KGM group displayed a significant increase in the feed intake-related hormones neuropeptide tyrosine (NPY), Ghrelin, and adenosine monophosphate-activated kinase (AMPK) levels. KGM modified the relative abundance of Clostridium, Candidatus Saccharimonas, unclassified Firmicutes, and unclassified Christensenellaceae in sow feces. Acetate, valerate, and isobutyrate were also improved in the feces of sows in the KGM group. These are potential target bacterial genera that may modulate the host's health. Furthermore, Spearman's correlation analysis unveiled significant correlations between the altered bacteria genus and feed intake-related hormones. More importantly, KGM reduced interleukin-6 (IL-6) levels in milk, further improved IL-10 levels, and reduced zonulin levels in the serum of offspring. CONCLUSION: In conclusion, maternal dietary supplementation with KGM during late gestation and lactation improves maternal nutritional status by modifying maternal microbial and increasing lactation feed intake, which benefits the anti-inflammatory capacity of the offspring serum. © 2024 Society of Chemical Industry.

Predict the Polarizability and Order of Magnitude of Second Hyperpolarizability of Molecules by Machine Learning.

In order to determine the polarizability and hyperpolarizability of a molecule, several key parameters need to be known, including the excitation energy of the ground and excited states, the transition dipole moment, and the difference of dipole moment between the ground and excited states. In this study, a machine-learning model was developed and trained to predict the molecular polarizability and second-order hyperpolarizability on a subset of QM9 data set. The density of states was employed as input to the model. The results demonstrated that the machine-learning model effectively estimated both polarizability and the order of magnitude of second-order hyperpolarizability. However, the model was unable to predict the dipole moment and first-order hyperpolarizability, suggesting limitations in its ability to predict the difference of dipole moment between the ground and excited states. The computational efficiency of machine-learning models compared to traditional quantum mechanical calculations enables the possibility of large-scale screening of molecules that satisfy specific requirements using existing databases. This work presents a potential solution for the efficient exploration and analysis of molecules on a larger scale.

Post-Assembly Modification of Homochiral Titanium-Organic Cages for Recognition and Separation of Molecular Isomers.

A chiral metal-organic cage (MOC) was extended and fixed into a porous framework using a post-assembly modification strategy, which made it easier to study the host-guest chemistry of the solid-state MOC using a single-crystal diffraction technique. Anionic Ti4 L6 (L=embonate) cage can be used as a 4-connecting crystal engineering tecton, and its optical resolution was achieved, thus homochiral ΔΔΔΔ- and ΛΛΛΛ-[Ti4 L6 ] cages were obtained. Accordingly, a pair of homochiral cage-based microporous frameworks (PTC-236(Δ) and PTC-236(Λ)) were easily prepared by a post-assembly reaction. PTC-236 has rich recognition sites provided by the Ti4 L6 moieties, chiral channels and high framework stability, affording a single-crystal-to-single-crystal transformation for guest structure analyses. Thus it was successfully utilized for the recognition and separation of isomeric molecules. This study provides a new approach for the orderly combination of well-defined MOCs into functional porous frameworks.

Chiral-Induced Ultrathin Covalent Organic Frameworks Nanosheets with Tunable Circularly Polarized Luminescence.

Development of covalent organic frameworks (COFs) with circularly polarized luminescence (CPL) is still challenging. Here we first reported ultrathin COFs nanosheets (NS) based CPL materials using a chiral induced-synthesis strategy. Chiral amines served as chiral inducers to give COF TpBpy with chirality and participated in the modification of TpBpy, inhibiting the fluorescence quenching caused by π-π stacking to form ultrathin luminescent chiral COFs (chirCOFs) NS. The obtained chirCOFs R-/S-TpBpy NS had strong chirality and intense red CPL property with a |glum| of ∼0.02. Afterward, the carboxyl containing green and blue fluorescent dye molecules were postmodified onto the chirCOFs NS (chirCOFs/Dyes) to achieve color-adjustable CPL. Due to the chirality and energy transfer between chirCOFs and dye groups, the obtained chirCOFs/Dyes showed strong chirality and increased and tunable photoluminescence, exhibiting excellent, tunable, and amplified CPL performance with a maximum |glum| of ∼0.1, which was ∼5 times stronger than that of as-prepared chirCOFs NS. Moreover, the corresponding chirCOFs NS were dispersed into a polydimethylsiloxane (PDMS) matrix to form wafer size, highly transparent, and flexible COFs/PDMS films for practical CPL application. This study opens a new strategy to prepare ultrathin chirCOFs NS with strong and tunable CPL by chiral induction and provides a new approach for the preparation of transparent, large size, and flexible COFs composite films in chiral optical applications.

Oriented Assembly of 2D Metal-Pyridylporphyrinic Framework Films for Giant Nonlinear Optical Limiting.

The development of metal-organic frameworks (MOFs) with nonlinear optical (NLO) properties is of pronounced significance for optical devices. Herein, a series of 2D MOFs ZnTPyP(M) (TPyP = 5,10,15,20-tetrakis(4-pyridyl)porphyrin, M = Cu, Ni, Mn, H2) films with [010]-orientation growth composed of ultrathin nanosheets from a pyridylporphyrinic ligand are first obtained by using a liquid-phase epitaxial (LPE) layer-by-layer (lbl) growth approach. ZnTPyP(M) films show a giant nonlinear optical limiting (OL) response and can be modulated by tuning the type of metalloporphyrinic ligands. As a result, ZnTPyP(Cu) film exhibits the highest nonlinear absorption coefficient of 5.7 × 10-6 m/W compared to other reported NLO materials. Density functional theory calculations were consistent with the experimental results, revealing that the tunable π-π* local excitation and the increased delocalization of the metalloporphyrinic group regulate the NLO performance of ZnTPyP(M) films. These findings provide new insight into the effect of 2D porphyrinic MOFs toward the NLO response and offer new film candidates for nonlinear OL application.

MXenes Thin Films: From Fabrication to Their Applications.

Two-dimensional MXenes possessed exceptional physiochemical properties such as high electrical conductivity (20,000 Scm-1), flexibility, mechanical strength (570 MPa), and hydrophilic surface functionalities that have been widely explored for energy storage, sensing, and catalysis applications. Recently, the fabrication of MXenes thin films has attracted significant attention toward electronic devices and sensor applications. This review summarizes the exciting features of MXene thin film fabrication methods such as vacuum-assisted filtration (VAF), electrodeposition techniques, spin coating, spray coating, dip-coating methods, and other physical/chemical vapor deposition methods. Furthermore, a comparison between different methods available for synthesizing a variety of MXenes films was discussed in detail. This review further summarizes fundamental aspects and advances of MXenes thin films in solar cells, batteries, electromagnetic interference shielding, sensing, etc., to date. Finally, the challenges and opportunities in terms of future research, development, and applications of MXenes-based films are discussed. A comprehensive understanding of these competitive features and challenges shall provide guidelines and inspiration for further growth in MXenes-based functional thin films and contribute to the advances in MXenes technology.

Ti3C2Tx-Modified PEDOT:PSS Hole-Transport Layer for Inverted Perovskite Solar Cells.

PEDOT: PSS is a commonly used hole-transport layer (HTL) in inverted perovskite solar cells (PSCs) due to its compatibility with low-temperature solution processing. However, it possesses lower conductivity than other conductive polymers and metal oxides, along with surface defects, limiting its photovoltaic performance. In this study, we introduced two-dimensional Ti3C2Tx (MXene) as an additive in the PEDOT:PSS HTL with varying doping concentrations (i.e., 0, 0.03, 0.05, and 0.1 wt.%) to tune the electrical conductivity of PEDOT:PSS and to modify the properties of the perovskite film atop it. We noted that the grain size of the CH3NH3PbI3 (MAPI3) perovskite layer grown over an optimal concentration of MXene (0.03 wt.%)-doped PEDOT:PSS increased from 250 nm to 400 nm, reducing charge recombination due to fewer grain boundaries. Ultraviolet photoelectron spectroscopy (UPS) revealed increased work function (WF) from 4.43 eV to 4.99 eV with 0.03 wt.% MXene doping, making the extraction of holes easier due to a more favorable energy level alignment with the perovskite. Quantum chemical investigations based on density functional theory (DFT) were conducted at the ωB97XD/6-311++G(d,p) level of theory to provide more insight into the stability, bonding nature, and optoelectronic properties of the PEDOT:PSS-MXene system. The theoretical investigations revealed that the doping of PEDOT:PSS with Ti3C2Tx could cause a significant effect on the electronic properties of the HTL, as experimentally demonstrated by an increase in the electrical conductivity. Finally, the inverted PSCs employing 0.03 wt.% MXene-doped PEDOT:PSS showed an average power conversion efficiency (PCE) of 15.1%, up from 12.5% for a reference PSC employing a pristine PEDOT:PSS HTL. The champion device with a 0.03 wt.% MXene-PEDOT:PSS HTL achieved 15.5% PCE.

Interpenetrated Metal-Porphyrinic Framework for Enhanced Nonlinear Optical Limiting.

Structural interpenetration in metal-organic frameworks (MOFs) significantly impacts on their properties and functionalities. However, understanding the interpenetration on third-order nonlinear optics (NLO) of MOFs have not been reported to date. Herein, we report two 3D porphyrinic MOFs, a 2-fold interpenetrated [Zn2(TPyP)(AC)2] (ZnTPyP-1) and a noninterpenetrated [Zn3(TPyP)(H2O)2(C2O4)2] (ZnTPyP-2), constructed from 5,10,15,20-tetra(4-pyridyl)porphyrin (TPyP(H2)) and Zn(NO3)2 (AC = acetate, C2O4 = oxalate). ZnTPyP-1 achieves excellent optical limiting (OL) performance with a giant nonlinear absorption coefficient (3.61 × 106 cm/GW) and large third-order susceptibility (7.73 × 10-7 esu), which is much better than ZnTPyP-2 and other reported OL materials. The corresponding MOFs nanosheets are dispersed into a polydimethylsiloxane (PDMS) matrix to form highly transparent and flexible MOFs/PDMS glasses for practical OL application. In addition, the OL response optimized by adjusting the MOFs concentration in the PDMS matrix and the type of metalloporphyrin are discussed in the ZnTPyP-1 system. The theoretical calculation confirmed that the abundant π-π interaction from porphyrinic groups in the interpenetrated framework increased the electron delocalization/transfer and boosted the OL performance. This study opens a new avenue to enhance OL performance by the construction of interpenetrated structures and provides a new approach for the preparation of transparent and flexible MOF composites in nonlinear optical applications.

Host-Guest Thin Films by Confining Ultrafine Pt/C QDs into Metal-Organic Frameworks for Highly Efficient Hydrogen Evolution.

Combining the features of host templates and guest species is an efficient strategy to optimize the photo/electrocatalytic performance. Herein, novel host-guest thin-film electrocatalysts are designed and developed with Pt doped carbon (Pt/C) confined into porphyrin-based metal-organic frameworks (MOFs). Porous MOF PCN-222 and PCN-221 thin films are used as the host templates and fabricated using vapor-assisted deposition method, and then the guest Pt/C quantum dots are encapsulated into the MOFs by loading the glucose mixed H2 PtCl6 and heating at 200 °C. Thanks to the confinement effect of MOF pores, the homogenous and ultrafine Pt/C nanowires (Pt/CNWs) and nanodots (Pt/CNDs) are confined in nanochannels of PCN-222 and nanocages of PCN-221 (Pt/CNW@PCN-222 and Pt/CND@PCN-221), respectively. The electrocatalytic study shows that the host-guest thin films have highly-efficient electrocatalytic hydrogen evolution performance under light irradiation. Furthermore, the time-resolved photoluminescent results reveal that Pt/CNW@PCN-222 has a faster charge transfer (441 ps) from PCN-222 to Pt/CNWs comparing to that (557 ps) of Pt/CND@PCN-221, indicating the guests with different shapes play an important role in the electrocatalytic performance. This work serves to present both the outstanding level of control in the precise synthesis and high potential for nanocomposite thin films in photo-electrocatalytic application.

Epitaxial Growth of Oriented Metalloporphyrin Network Thin Film for Improved Selectivity of Volatile Organic Compounds.

This study reports an oriented and homogenous cobalt-metalloporphyrin network (PIZA-1) thin film prepared by liquid phase epitaxial (LPE) method. The thickness of the obtained thin films can be well controlled, and their photocurrent properties can also be tuned by LPE cycles or the introduction of conductive guest molecules (tetracyanoquinodimethane and C60 ) into the PIZA-1 pores. The study of quartz crystal microbalance adsorption confirms that the PIZA-1 thin film with [110]-orientation presents much higher selectivity of benzene over toluene and p-xylene than that of the PIZA-1 powder with mixed orientations. These results reveal that the selective adsorption of volatile organic compounds highly depends on the growth orientations of porphyrin-based metal-organic framework thin films. Furthermore, the work will provide a new perspective for developing important semiconductive sensing materials with improved selectivity of guest compounds.

Facile Synthesis of Metal-Loaded Porous Carbon Thin Films via Carbonization of Surface-Mounted Metal-Organic Frameworks.

We report a facile approach to prepare metal-nanocatalyst-incorporated carbon thin films with uniform size distribution via carbonization of surface-mounted metal-organic frameworks (SURMOFs) and metal oxo-clusters loaded SURMOF. The calcinated thin films have high performance of methylene blue degradation and the reduction of nitrobenzene. This study describes a general strategy for preparing various nanoparticle-impregnated porous carbon thin films for applications in catalysis.