Nanomolar Protein Thermal Profiling with Modified Cyanine Dyes.

Protein properties and interactions have been widely investigated by using external labels. However, the micromolar sensitivity of the current dyes limits their applicability due to the high material consumption and assay cost. In response to this challenge, we synthesized a series of cyanine5 (Cy5) dye-based quencher molecules to develop an external dye technique to probe proteins at the nanomolar protein level in a high-throughput one-step assay format. Several families of Cy5 dye-based quenchers with ring and/or side-chain modifications were designed and synthesized by introducing organic small molecules or peptides. Our results showed that steric hindrance and electrostatic interactions are more important than hydrophobicity in the interaction between the luminescent negatively charged europium-chelate-labeled peptide (Eu-probe) and the quencher molecules. The presence of substituents on the quencher indolenine rings reduces their quenching property, whereas the increased positive charge on the indolenine side chain improved the interaction between the quenchers and the luminescent compound. The designed quencher structures entirely altered the dynamics of the Eu-probe (protein-probe) for studying protein stability and interactions, as we were able to reduce the quencher concentration 100-fold. Moreover, the new quencher molecules allowed us to conduct the experiments using neutral buffer conditions, known as the peptide-probe assay. These improvements enabled us to apply the method in a one-step format for nanomolar protein-ligand interaction and protein profiling studies instead of the previously developed two-step protocol. These improvements provide a faster and simpler method with lower material consumption.

Homogeneous luminescent quantitation of cellular guanosine and adenosine triphosphates (GTP and ATP) using QT-LucGTP&ATP assay.

Guanosine triphosphate (GTP) and adenosine triphosphate (ATP) are essential nucleic acid building blocks and serve as energy molecules for a wide range of cellular reactions. Cellular GTP concentration fluctuates independently of ATP and is significantly elevated in numerous cancers, contributing to malignancy. Quantitative measurement of ATP and GTP has become increasingly important to elucidate how concentration changes regulate cell function. Liquid chromatography-coupled mass spectrometry (LC-MS) and capillary electrophoresis-coupled MS (CE-MS) are powerful methods widely used for the identification and quantification of biological metabolites. However, these methods have limitations related to specialized instrumentation and expertise, low throughput, and high costs. Here, we introduce a novel quantitative method for GTP concentration monitoring (GTP-quenching resonance energy transfer (QRET)) in homogenous cellular extracts. CE-MS analysis along with pharmacological control of cellular GTP levels shows that GTP-QRET possesses high dynamic range and accuracy. Furthermore, we combined GTP-QRET with luciferase-based ATP detection, leading to a new technology, termed QT-LucGTP&ATP, enabling high-throughput compatible dual monitoring of cellular GTP and ATP in a homogenous fashion. Collectively, GTP-QRET and QT-LucGTP&ATP offer a unique, high-throughput opportunity to explore cellular energy metabolism, serving as a powerful platform for the development of novel therapeutics and extending its usability across a range of disciplines.

Rapid high-throughput compatible label-free virus particle quantification method based on time-resolved luminescence.

Viruses play a major role in modern society and create risks from global pandemics and bioterrorism to challenges in agriculture. Virus infectivity assays and genome copy number determination methods are often used to obtain information on virus preparations used in diagnostics and vaccine development. However, these methods do not provide information on virus particle count. Current methods to measure the number of viral particles are often cumbersome and require highly purified virus preparations and expensive instrumentation. To tackle these problems, we developed a simple and cost-effective time-resolved luminescence-based method for virus particle quantification. This mix-and-measure technique is based on the recognition of the virus particles by an external Eu3+-peptide probe, providing results on virus count in minutes. The method enables the detection of non-enveloped and enveloped viruses, having over tenfold higher detectability for enveloped, dynamic range from 5E6 to 3E10 vp/mL, than non-enveloped viruses. Multiple non-enveloped and enveloped viruses were used to demonstrate the functionality and robustness of the Protein-Probe method.

Thermal Shift Assay for Small GTPase Stability Screening: Evaluation and Suitability.

Thermal unfolding methods are commonly used as a predictive technique by tracking the protein's physical properties. Inherent protein thermal stability and unfolding profiles of biotherapeutics can help to screen or study potential drugs and to find stabilizing or destabilizing conditions. Differential scanning calorimetry (DSC) is a 'Gold Standard' for thermal stability assays (TSA), but there are also a multitude of other methodologies, such as differential scanning fluorimetry (DSF). The use of an external probe increases the assay throughput, making it more suitable for screening studies, but the current methodologies suffer from relatively low sensitivity. While DSF is an effective tool for screening, interpretation and comparison of the results is often complicated. To overcome these challenges, we compared three thermal stability probes in small GTPase stability studies: SYPRO Orange, 8-anilino-1-naphthalenesulfonic acid (ANS), and the Protein-Probe. We studied mainly KRAS, as a proof of principle to obtain biochemical knowledge through TSA profiles. We showed that the Protein-Probe can work at lower concentration than the other dyes, and its sensitivity enables effective studies with non-covalent and covalent drugs at the nanomolar level. Using examples, we describe the parameters, which must be taken into account when characterizing the effect of drug candidates, of both small molecules and Designed Ankyrin Repeat Proteins.

Protease Substrate-Independent Universal Assay for Monitoring Digestion of Native Unmodified Proteins.

Proteases are a group of enzymes with a catalytic function to hydrolyze peptide bonds of proteins. Proteases regulate the activity, signaling mechanism, fate, and localization of many proteins, and their dysregulation is associated with various pathological conditions. Proteases have been identified as biomarkers and potential therapeutic targets for multiple diseases, such as acquired immunodeficiency syndrome, cardiovascular diseases, osteoporosis, type 2 diabetes, and cancer, where they are essential to disease progression. Thus, protease inhibitors and inhibitor-like molecules are interesting drug candidates. To study proteases and their substrates and inhibitors, simple, rapid, and sensitive protease activity assays are needed. Existing fluorescence-based assays enable protease monitoring in a high-throughput compatible microtiter plate format, but the methods often rely on either molecular labeling or synthetic protease targets that only mimic the hydrolysis site of the true target proteins. Here, we present a homogenous, label-free, and time-resolved luminescence utilizing the protein-probe method to assay proteases with native and denatured substrates at nanomolar sensitivity. The developed protein-probe method is not restricted to any single protein or protein target class, enabling digestion and substrate fragmentation studies with the natural unmodified substrate proteins. The versatility of the assay for studying protease targets was shown by monitoring the digestion of a substrate panel with different proteases. These results indicate that the protein-probe method not only monitors the protease activity and inhibition, but also studies the substrate specificity of individual proteases.

Sensitive Label-Free Thermal Stability Assay for Protein Denaturation and Protein-Ligand Interaction Studies.

In modern biochemistry, protein stability and ligand interactions are of high interest. These properties are often studied with methods requiring labeled biomolecules, as the existing methods utilizing luminescent external probes suffer from low sensitivity. Currently available label-free technologies, e.g., thermal shift assays, circular dichroism, and differential scanning calorimetry, enable studies on protein unfolding and protein-ligand interactions (PLI). Unfortunately, the required micromolar protein concentration increases the costs and predisposes these methods for spontaneous protein aggregation. Here, we report a time-resolved luminescence method for protein unfolding and PLI detection with nanomolar sensitivity. The Protein-Probe method is based on highly luminescent europium chelate-conjugated probe, which is the key component in sensing the hydrophobic regions exposed to solution after protein unfolding. With the same Eu-probe, we also demonstrate ligand-interaction induced thermal stabilization with model proteins. The developed Protein-Probe method provides a sensitive approach overcoming the problems of the current label-free methodologies.

Single-Peptide TR-FRET Detection Platform for Cysteine-Specific Post-Translational Modifications.

Post-translational modifications (PTMs) are one of the most important regulatory mechanisms in cells, and they play key roles in cell signaling both in health and disease. PTM catalyzing enzymes have become significant drug targets, and therefore, tremendous interest has been focused on the development of broad-scale assays to monitor several different PTMs with a single detection platform. Most of the current methodologies suffer from low throughput or rely on antibody recognition, increasing the assay costs, and decreasing the multifunctionality of the assay. Thus, we have developed a sensitive time-resolved Förster resonance energy transfer (TR-FRET) detection method for PTMs of cysteine residues using a single-peptide approach performed in a 384-well format. In the developed assay, the enzyme-specific biotinylated substrate peptide is post-translationally modified at the cysteine residue, preventing the subsequent thiol coupling with a reactive AlexaFluor 680 acceptor dye. In the absence of enzymatic activity, increase in the TR-FRET signal between the biotin-bound Eu(III)-labeled streptavidin donor and the cysteine-coupled AlexaFluor 680 acceptor dye is observed. We demonstrate the detection concept with cysteine modifying S-nitrosylation and ADP-ribosylation reactions using a chemical nitric oxide donor S-nitrosoglutathione and enzymatic ADP-ribosyltransferase PtxS1-subunit of pertussis toxin, respectively. As a proof of concept, three peptide substrates derived from the small GTPase K-Ras and the inhibitory α-subunit of the heterotrimeric G-protein Gαi showed expected functionality in both chemical and enzymatic assays. Measurements yielded signal-to-background ratios of 28.7, 33.0, and 8.7 between the modified and the nonmodified substrates for the three peptides in the S-nitrosylation assay, 5.8 in the NAD+ hydrolysis assay, and 6.8 in the enzymatic ADP-ribosyltransferase inhibitor dose-response assay. The developed antibody-free assay for cysteine-modifying enzymes provides a detection platform with low nanomolar peptide substrate consumption, and the assay is potentially applicable to investigate various cysteine-modifying enzymes in a high throughput compatible format.

Nanomolar Protein-Protein Interaction Monitoring with a Label-Free Protein-Probe Technique.

Protein-protein interactions (PPIs) are an essential part of correct cellular functionality, making them increasingly interesting drug targets. While Förster resonance energy transfer-based methods have traditionally been widely used for PPI studies, label-free techniques have recently drawn significant attention. These methods are ideal for studying PPIs, most importantly as there is no need for labeling of either interaction partner, reducing potential interferences and overall costs. Already, several different label-free methods are available, such as differential scanning calorimetry and surface plasmon resonance, but these biophysical methods suffer from low to medium throughput, which reduces suitability for high-throughput screening (HTS) of PPI inhibitors. Differential scanning fluorimetry, utilizing external fluorescent probes, is an HTS compatible technique, but high protein concentration is needed for experiments. To improve the current concepts, we have developed a method based on time-resolved luminescence, enabling PPI monitoring even at low nanomolar protein concentrations. This method, called the protein probe technique, is based on a peptide conjugated with Eu3+ chelate, and it has already been applied to monitor protein structural changes and small molecule interactions at elevated temperatures. Here, the applicability of the protein probe technique was demonstrated by monitoring single-protein pairing and multiprotein complexes at room and elevated temperatures. The concept functionality was proven by using both artificial and multiple natural protein pairs, such as KRAS and eIF4A together with their binding partners, and C-reactive protein in a complex with its antibody.

Homogeneous Dual-Parametric-Coupled Assay for Simultaneous Nucleotide Exchange and KRAS/RAF-RBD Interaction Monitoring.

We have developed a rapid and sensitive single-well dual-parametric method introduced in linked RAS nucleotide exchange and RAS/RAF-RBD interaction assays. RAS mutations are frequent drivers of multiple different human cancers, but the development of therapeutic strategies has been challenging. Traditionally, efforts to disrupt the RAS function have focused on nucleotide exchange inhibitors, GTP-RAS interaction inhibitors, and activators increasing GTPase activity of mutant RAS proteins. As the amount of biological knowledge grows, targeted biochemical assays enabling high-throughput screening have become increasingly interesting. We have previously introduced a homogeneous quenching resonance energy transfer (QRET) assay for nucleotide binding studies with RAS and heterotrimeric G proteins. Here, we introduce a novel homogeneous signaling technique called QTR-FRET, which combine QRET technology and time-resolved Förster resonance energy transfer (TR-FRET). The dual-parametric QTR-FRET technique enables the linking of guanine nucleotide exchange factor-induced Eu3+-GTP association to RAS, monitored at 615 nm, and subsequent Eu3+-GTP-loaded RAS interaction with RAF-RBD-Alexa680 monitored at 730 nm. Both reactions were monitored in a single-well assay applicable for inhibitor screening and real-time reaction monitoring. This homogeneous assay enables separable detection of both nucleotide exchange and RAS/RAF interaction inhibitors using low nanomolar protein concentrations. To demonstrate a wider applicability as a screening and real-time reaction monitoring method, the QTR-FRET technique was also applied for G(i)α GTP-loading and pertussis toxin-catalyzed ADP-ribosylation of G(i)α, for which we synthesized a novel γ-GTP-Eu3+ molecule. The study indicates that the QTR-FRET detection technique presented here can be readily applied to dual-parametric assays for various targets.

High-throughput amenable fluorescence-assays to screen for calmodulin-inhibitors.

The KRAS gene is highly mutated in human cancers and the focus of current Ras drug development efforts. Recently the interface between the C-terminus of K-Ras and calmodulin (CaM) was proposed as a target site to block K-Ras driven cancer cell stemness. We therefore aimed at developing a high-throughput amenable screening assay to identify novel CaM-inhibitors as potential K-Ras stemness-signaling disruptors. A modulated time-resolved Förster resonance energy transfer (mTR-FRET)-assay was developed and benchmarked against an identically designed fluorescence anisotropy (FA)-assay. In both assays, two CaM-binding peptides were labeled with Eu(III)-chelate or fluorescein and used as single-label reporter probes that were displaced from CaM upon competitor binding. Thus, peptidic and small molecule competitors with nanomolar to micromolar affinities to CaM could be detected, including a peptide that was derived from the C-terminus of K-Ras. In order to detect CaM-residue specific covalent inhibitors, a cell lysate-based Förster resonance energy transfer (FRET)-assay was furthermore established. This assay enabled us to measure the slow, residue-specific, covalent inhibition by ophiobolin A in the presence of other endogenous proteins. In conclusion, we have developed a panel of fluorescence-assays that allows identification of conventional and covalent CaM-inhibitors as potential disruptors of K-Ras driven cancer cell stemness.

Immunoassays Based on Hot Electron-Induced Electrochemiluminescence at Disposable Cell Chips with Printed Electrodes.

Novel hot electron-emitting working electrodes and conventional counter electrodes were created by screen printing. Thus, low-cost disposable electrode chips for bioaffinity assays were produced to replace our older expensive electrode chips manufactured by manufacturing techniques of electronics from silicon or on glass chips. The present chips were created by printing as follows: (i) silver lines provided the electronic contacts, counter electrode and the bottom of the working electrode and counter electrode, (ii) the composite layer was printed on appropriate parts of the silver layer, and (iii) finally a hydrophobic ring was added to produce the electrochemical cell boundaries. The applicability of these electrode chips in bioaffinity assays was demonstrated by an immunoassay of human C-reactive protein (i) using Tb(III) chelate label displaying long-lived hot electron-induced electrochemiluminescence (HECL) and (ii) now for the first time fluorescein isothiocyanate (FITC) was utilized as an a low-cost organic label displaying a short-lived HECL in a real-world bioaffinity assay.

Label-Free Time-Gated Luminescent Detection Method for the Nucleotides with Varying Phosphate Content.

A new label-free molecular probe for luminescent nucleotide detection in neutral aqueous solution is presented. Phosphate-containing molecules, such as nucleotides possess vital role in cell metabolism, energy economy, and various signaling processes. Thus, the monitoring of nucleotide concentration and nucleotide related enzymatic reactions is of high importance. Two component lanthanide complex formed from Tb(III) ion carrier and light harvesting antenna, readily distinguishes nucleotides containing different number of phosphates and enable direct detection of enzymatic reactions converting nucleotide triphosphate (NTP) to nucleotide di/monophosphate or the opposite. Developed sensor enables the detection of enzymatic activity with a low nanomolar sensitivity, as highlighted with K-Ras and apyrase enzymes in their hydrolysis assays performed in a high throughput screening compatible 384-well plate format.

High-Throughput Dual Screening Method for Ras Activities and Inhibitors.

Ras GTPases act as "molecular switches", alternating between inactive GDP-bound and active GTP-bound conformation. Ras-oncogenes were discovered over three decades ago, but there are still no effective therapies for Ras-driven cancers. So far, drug discovery strategies have been unsuccessful, because of a lack of suitable screening methodologies and well-defined binding pockets on the Ras proteins. Here, we addressed the former by introducing a homogeneous quenching resonance energy transfer (QRET) technique-based screening strategy for Ras interfacial and competitive inhibitors. We demonstrate that using a unique GTP-specific antibody fragment to monitor GTPase cycling in the presence of a guanine nucleotide exchange factor (GEF) and a GTPase activating protein (GAP) is an efficient method for Ras inhibitor high-throughput screening. When compared to a conventional GEF-stimulated nucleotide exchange assay in a proof-of-concept screen, we identified an overlapping set of potential inhibitor compounds but also compounds found exclusively with the new GTP hydrolysis monitoring-based GTPase cycling assay.

Luminometric Nanoparticle-Based Assay for High Sensitivity Detection of ß-Amyloid Aggregation.

A nanoparticle-based assay utilizing time-resolved luminescence resonance energy transfer (TR-LRET) was developed for the detection of ß-amyloid aggregation. The assay is based on the competitive adsorption of the sample and the acceptor-labeled protein to donor europium(III) polystyrene nanoparticles. The performance of the assay was demonstrated by following the fibrillization of ß-amyloid peptide 1-42 (Aß42) as a function of time and by comparing to the reference methods atomic force microscopy (AFM) and thioflavin T (ThT) assay. The fibrillization leads to reduced adsorption of Aß42 to the nanoparticles increasing the TR-LRET signal. The investigated methods detected fibril formation with equal sensitivities. Eight potential fibrillization inhibitor compounds reported in the literature were tested and the results obtained with each method were compared. It was shown with AFM imaging that the inhibition of fibril formation was not complete with any of the compounds. The developed TR-LRET nanoparticle assay gave corresponding results with the AFM imaging. However, the ThT assay led to contradictory results, as low fluorescence signal was measured in the presence of all tested compounds suggesting inhibition of fibrillization. Our results suggest that the developed TR-LRET nanoparticle assay can be exploited for screening of potential ß-amyloid aggregation inhibitors, whereas some of the tested compounds may be measured as false positive inhibitors with the much-utilized ThT assay.

Luminometric Label Array for Quantification and Identification of Metal Ions.

Quantification and identification of metal ions has gained interest in drinking water and environmental analyses. We have developed a novel label array method for the quantification and identification of metal ions in drinking water. This simple ready-to-go method is based on the nonspecific interactions of multiple unstable lanthanide chelates and nonantenna ligands with sample leading to a luminescence signal profile, unique to the sample components. The limit of detection at ppb concentration level and average coefficient of variation of 10% were achieved with the developed label array. The identification of 15 different metal ions including different oxidation states Cr(3+)/Cr(6+), Cu(+)/Cu(2+), Fe(2+)/Fe(3+), and Pb(2+)/Pb(4+) was demonstrated. Moreover, a binary mixture of Cu(2+) and Fe(3+) and ternary mixture of Cd(2+), Ni(2+), and Pb(2+) were measured and individual ions were distinguished.

Lanthanide Label Array Method for Identification and Adulteration of Honey and Cacao.

A generic, cost-effective, and simple method has been developed to fingerprint liquids to differentiate food brands and ingredients. The method is based on a label array using nonspecific long lifetime unstable luminescent lanthanide labels. The interaction between the liquid sample and the label is typically detrimental to the luminescence of the unstable chelate leading to a sample-dependent luminescence-intensity array. The label-array method is a unique approach as the array of unstable chelates is extremely inexpensive to produce and possesses high sensitivity due to spectral as well as unstable structural properties of the lanthanide label. The global method has been applied to distinguish commercial honey and cacao brands to demonstrate its feasibility as honey and cacao are among the most adulterated food products.

Method for determination of polyethylene glycol molecular weight.

A method utilizing competitive adsorption between polyethylene glycols (PEGs) and labeled protein to nanoparticles was developed for the determination of PEG molecular weight (MW) in a microtiter plate format. Two mix-and-measure systems, time-resolved luminescence resonance energy transfer (TR-LRET) with donor europium(III) polystyrene nanoparticles and acceptor-labeled protein and quenching with quencher gold nanoparticles and fluorescently labeled protein were compared for their performance. MW is estimated from the PEG MW dependent changes in the competitive adsorption properties, which are presented as the luminescence signal vs PEG mass concentration. The curves obtained with the TR-LRET system overlapped for PEGs larger than 400 g/mol providing no information on MW. Distinctly different curves were obtained with the quenching system enabling the assessment of PEG MW within a broad dynamic range. The data was processed with and without prior knowledge of the PEG concentration to measure PEGs over a MW range from 62 to 35,000 g/mol. The demonstration of the measurement independent of the PEG concentration suggests that the estimation of MW is possible with quenching nanoparticle system for neutrally charged and relatively hydrophilic polymeric molecules widening the applicability of the simple and cost-effective nanoparticle-based methods.

GTP-specific fab fragment-based GTPase activity assay.

GTPases are central cellular signaling proteins, which cycle between a GDP-bound inactive and a GTP-bound active conformation in a controlled manner. Ras GTPases are frequently mutated in cancer and so far only few experimental inhibitors exist. The most common methods for monitoring GTP hydrolysis rely on luminescent GDP- or GTP-analogs. In this study, the first GTP-specific Fab fragment and its application are described. We selected Fab fragments using the phage display technology. Six Fab fragments were found against 2'/3'-GTP-biotin and 8-GTP-biotin. Selected antibody fragments allowed specific detection of endogenous, free GTP. The most potent Fab fragment (2A4(GTP)) showed over 100-fold GTP-specificity over GDP, ATP, or CTP and was used to develop a heterogeneous time-resolved luminescence based assay for the monitoring of GTP concentration. The method allows studying the GEF dependent H-Ras activation (GTP binding) and GAP-catalyzed H-Ras deactivation (GTP hydrolysis) at nanomolar protein concentrations.

Simple nanoparticle-based luminometric method for molecular weight determination of polymeric compounds.

A nanoparticle-based method utilizing time-resolved luminescence resonance energy transfer (TR-LRET) was developed for molecular weight determination. This mix-and-measure nanoparticle method is based on the competitive adsorption between the analyte and the acceptor-labeled protein to donor Eu(III) nanoparticles. The size-dependent adsorption of molecules enables the molecular weight determination of differently sized polymeric compounds down to a concentration level of micrograms per liter. The molecular weight determination from 1 to 10 kDa for polyamino acids and from 0.3 to 70 kDa for polyethylene imines is demonstrated. The simple and cost-effective nanoparticle method as microtiter plate assay format shows great potential for the detection of the changes in molecular weight or for quantification of differently sized molecules in biochemical laboratories and in industrial polymeric processes.

Non-competitive aptamer-based quenching resonance energy transfer assay for homogeneous growth factor quantification.

A non-competitive homogeneous, single-label quenching resonance energy transfer (QRET) assay for protein quantification is now presented using lanthanide-chelate labeled nucleic acid aptamers. A labeled ssDNA aptamer binding to a growth factor has been successfully used to provide luminescence signal protection of the lanthanide label. The QRET technology has previously been applied to competitive assay formats, but now for the first time a direct non-competitive assay is presented. The QRET system is based on the protection of the Eu(iii)-chelate from a soluble quencher molecule when the aptamer interacts with a specific target protein. The direct QRET assay is possible as the aptamer structure itself cannot protect the Eu(iii)-label from quenching. The dynamic range for the optimized vascular endothelial growth factor (VEGF) assay is 0.25-10 nM. A successful quantification of the basic fibroblast growth factor (bFGF) is also demonstrated using the same QRET assay format with a dynamic range of 0.75-50 nM. These assays evidently show the suitability of the direct QRET technique to simple and efficient detection of large biomolecules. The QRET assay can potentially be applied as a detection platform for any other protein targets with a known aptamer sequence.