Intraluminal oxygen can keep small bowel mucosa intact in a segmental ischemia model.

Intestinal preservation for transplantation is accompanied by hypoperfusion with long periods of ischemia with total blood cessation and absolute withdrawal of oxygen leading to structural damage. The application of intraluminal oxygen has been successfully tested in small-animal series during storage and transport of the organ but have been so far clinically unrelatable. In this study, we tested whether a simple and clinically approachable method of intraluminal oxygen application could prevent ischemic damage in a large animal model, during warm ischemia time. We utilised a local no-flow ischemia model of the small intestine in pigs. A low-flow and high-pressure intraluminal oxygen deliverance system was applied in 6 pigs and 6 pigs served as a control group. Mucosal histopathology, hypoxia and barrier markers were evaluated after two hours of no-flow conditions, in both treatment and sham groups, and in healthy tissue. Macro- and microscopically, the luminal oxygen delivered treatment group showed preserved small bowel's appearance, viability, and mucosal integrity. A gradual deterioration of histopathology and barrier markers and increase in hypoxia-inducible factor 1-α expression towards the sites most distant from the oxygen application was observed. Intraluminal low-flow, high oxygen delivery can preserve the intestinal mucosa during total ischemia of the small intestine. This finding can be incorporated in methods to overcome small bowel ischemia and improve intestinal preservation for transplantation.

Adaptation of the NDIR technology to 13CO2 breath tests under increased inspiratory O2 concentrations.

Nondispersive infrared spectroscopy (NDIR) allows the continuous analysis of respiratory gases. Due to its high selectivity, simple and robust setup, and small footprint, it is also used to support (13)CO(2) breath tests to assess bacterial growth in the stomach, gut, or liver function. CO(2) NDIR signals, however, are biased by oxygen in the gas matrix. This complicates NDIR-based breath tests, if the inspired oxygen concentration has to be adjusted to the subject's requirements, or hyperoxia-induced effects were studied. To avoid the oxygen-induced bias, a "dilution" approach was developed: expired gas is mixed with N(2) to lower the oxygen content down to the usual range of 15-20%. Accuracy and precision were tested using synthetic gas mixtures with increasing (13)CO(2)-to-(12)CO(2) ratios ((13)CO(2)/(12)CO(2)), either based on synthetic air with approximately 20% volume O(2) or on pure O(2). For samples with delta(13)C values smaller than 300 (or (13)CO(2)/(12)CO(2) smaller than 0.003), the dilution does not significantly increase the bias in the (13)CO(2)/(12)CO(2) determination, and the within-run imprecision is smaller than 1 delta(13)C. The practical use of this approach was validated in a pig study using a sepsis model reflecting a clinical situation that requires an increased oxygen concentration for respiration. The N(2) dilution eliminated the high bias in NDIR measurement, thus allowing the determination of the impact of oxygenation on glucose oxidation in patients ventilated with increased oxygen.

[Review: Patient safety as a national health goal: current state and essential fields of action for the German healthcare system]. / Übersichtsartikel: Patientensicherheit als nationales Gesundheitsziel: Status und notwendige Handlungsfelder für die Gesundheitsversorgung in Deutschland.

For some years patient safety has been an important topic for the design of the healthcare systems in many countries. In Germany we are still in the starting phase of this development. Here, patient safety is not a main focus for research and there is only little funding for these topics. Thus most findings on patient safety have been derived in foreign studies. Slowly, some find their way into the clinical routine in Germany. This paper summarises the state of development of patient safety from a trans-sectoral point of view and outlines essential fields of action for the German healthcare system.

Patient safety related to the use of medical devices: a review and investigation of the current status in the medical device industry.

To reduce the risk of application error, the federal legislator has demanded a development process which is oriented towards usability (DIN EN 62366). Therefore, the research question concerns the application of this standard by medical device manufacturers. Questionnaires were filled out by five trained interviewers in fully standardized face-to-face interviews at MEDICA Düsseldorf 2010. The results are based on 65 interviews. Almost all companies evaluated usability as relevant for product development; however, the understanding of usability through companies can still be improved as well as increasing the amount of trained usability experts in the process.

Evaluation of a robot-assisted testing system for multisegmental spine specimens.

Mono- and multi-segmental testing methods are required to identify segmental motion patterns and evaluate the biomechanical behaviour of the spine. This study aimed to evaluate a new testing system for multisegmental specimens using a robot combined with an optical motion analysis system. After validation of the robotic system for accuracy, two groups of calf specimens (six monosegmental vs. six multisegmental) were mounted and the functional unit L3-4 was observed. Using rigid body markers, range of motion (ROM), elastic zone (EZ) and neutral zone (NZ), as well as stiffness properties of each functional spine unit (FSU) was acquired by an optical motion capture system. Finite helical axes (FHA) were calculated to analyse segmental movements. Both groups were tested in flexion and extension. A pure torque of 7.5 Nm was applied. Statistical analyses were performed using the Mann-Whitney U-test. Repeatability of robot positioning was -0.001±0.018 mm and -0.025±0.023° for translations and rotations, respectively. The accuracy of the optical system for the proposed set-up was 0.001±0.034 mm for translations and 0.075±0.12° for rotations. No significant differences in mean values and standard deviations of ROM for L3-4 compared to literature data were found. A robot-based facility for testing multisegmental spine units combined with a motion analysis system was proposed and the reliability and reproducibility of all system components were evaluated and validated. The proposed set-up delivered ROM results for mono- and multi-segmental testing that agreed with those reported in the literature. Representing the FHA via piercing points determined from ROM was the first attempt showing a relationship between ROM and FHA, which could facilitate the interpretation of spine motion patterns in the future.