RESUMEN
The presence of pharmaceuticals and personal care products (PPCPs) in biosolids applied to farmland is of concern due to their potential accumulation in the environment and the subsequent effects on humans. Thermo-alkaline hydrolysis (TAH) is a method used for greater stabilization of biosolids after anaerobic digestion. In this work, the effect of TAH on five selected PPCPs including fluoroquinolone antibiotics, ciprofloxacin (CIP), and ofloxacin (OFLX), and three commonly used antimicrobial agents, miconazole (MIC), triclosan (TCS) and triclocarban (TCC) was evaluated. At the onset, extraction and analytical methods were optimized for maximum simultaneous recovery and LC-MS quantification of the target PPCPs from both water and biosolids for improved accuracy. The compounds were detected in the range of 54 ± 3 to 6166 ± 532 ng/g in raw biosoilds collected from a local WWTP. Next, batch control adsorption experiments of the selected PPCPs were conducted in various sludges, which indicated about 89%-98% sorption of the PPCPs onto solid phase due to their high octanol-water coefficients. Subsequently, thermo-alkaline (pH 9.5, 75 °C, 45 min) hydrolysis (TAH) was conducted to determine the extent of degradation of these compounds in deionized (DI) water and biosolids due to treatment. The degradation of these compounds due to TAH ranged from 42% to 99% and 37%-41% in pure water and biosolids, respectively, potentially lowering their risk in the environment due to land application. A list of compounds for which the optimized analytical method potentially can be used for detection and quantification in environmental samples is provided in the supporting document.