Local response and emerging nonlinear elastic length scale in biopolymer matrices.

Nonlinear stiffening is a ubiquitous property of major types of biopolymers that make up the extracellular matrices (ECM) including collagen, fibrin, and basement membrane. Within the ECM, many types of cells such as fibroblasts and cancer cells have a spindle-like shape that acts like two equal and opposite force monopoles, which anisotropically stretch their surroundings and locally stiffen the matrix. Here, we first use optical tweezers to study the nonlinear force-displacement response to localized monopole forces. We then propose an effective-probe scaling argument that a local point force application can induce a stiffened region in the matrix, which can be characterized by a nonlinear length scale R* that increases with the increasing force magnitude; the local nonlinear force-displacement response is a result of the nonlinear growth of this effective probe that linearly deforms an increasing portion of the surrounding matrix. Furthermore, we show that this emerging nonlinear length scale R* can be observed around living cells and can be perturbed by varying matrix concentration or inhibiting cell contractility.

Nuclear lamin isoforms differentially contribute to LINC complex-dependent nucleocytoskeletal coupling and whole-cell mechanics.

The ability of a cell to regulate its mechanical properties is central to its function. Emerging evidence suggests that interactions between the cell nucleus and cytoskeleton influence cell mechanics through poorly understood mechanisms. Here we conduct quantitative confocal imaging to show that the loss of A-type lamins tends to increase nuclear and cellular volume while the loss of B-type lamins behaves in the opposite manner. We use fluorescence recovery after photobleaching, atomic force microscopy, optical tweezer microrheology, and traction force microscopy to demonstrate that A-type lamins engage with both F-actin and vimentin intermediate filaments (VIFs) through the linker of nucleoskeleton and cytoskeleton (LINC) complexes to modulate cortical and cytoplasmic stiffness as well as cellular contractility in mouse embryonic fibroblasts (MEFs). In contrast, we show that B-type lamins predominantly interact with VIFs through LINC complexes to regulate cytoplasmic stiffness and contractility. We then propose a physical model mediated by the lamin­LINC complex that explains these distinct mechanical phenotypes (mechanophenotypes). To verify this model, we use dominant negative constructs and RNA interference to disrupt the LINC complexes that facilitate the interaction of the nucleus with the F-actin and VIF cytoskeletons and show that the loss of these elements results in mechanophenotypes like those observed in MEFs that lack A- or B-type lamin isoforms. Finally, we demonstrate that the loss of each lamin isoform softens the cell nucleus and enhances constricted cell migration but in turn increases migration-induced DNA damage. Together, our findings uncover distinctive roles for each of the four major lamin isoforms in maintaining nucleocytoskeletal interactions and cellular mechanics.

Nonlinear elasticity of biological basement membrane revealed by rapid inflation and deflation.

Basement membrane (BM) is a thin layer of extracellular matrix that surrounds most animal tissues, serving as a physical barrier while allowing nutrient exchange. Although they have important roles in tissue structural integrity, physical properties of BMs remain largely uncharacterized, which limits our understanding of their mechanical functions. Here, we perform pressure-controlled inflation and deflation to directly measure the nonlinear mechanics of BMs in situ. We show that the BMs behave as a permeable, hyperelastic material whose mechanical properties and permeability can be measured in a model-independent manner. Furthermore, we find that BMs exhibit a remarkable nonlinear stiffening behavior, in contrast to the reconstituted Matrigel. This nonlinear stiffening behavior helps the BMs to avoid the snap-through instability (or structural softening) widely observed during the inflation of most elastomeric balloons and thus maintain sufficient confining stress to the enclosed tissues during their growth.

Cell contraction induces long-ranged stress stiffening in the extracellular matrix.

Animal cells in tissues are supported by biopolymer matrices, which typically exhibit highly nonlinear mechanical properties. While the linear elasticity of the matrix can significantly impact cell mechanics and functionality, it remains largely unknown how cells, in turn, affect the nonlinear mechanics of their surrounding matrix. Here, we show that living contractile cells are able to generate a massive stiffness gradient in three distinct 3D extracellular matrix model systems: collagen, fibrin, and Matrigel. We decipher this remarkable behavior by introducing nonlinear stress inference microscopy (NSIM), a technique to infer stress fields in a 3D matrix from nonlinear microrheology measurements with optical tweezers. Using NSIM and simulations, we reveal large long-ranged cell-generated stresses capable of buckling filaments in the matrix. These stresses give rise to the large spatial extent of the observed cell-induced matrix stiffness gradient, which can provide a mechanism for mechanical communication between cells.

In vitro spatially organizing the differentiation in individual multicellular stem cell aggregates.

With significant potential as a robust source to produce specific somatic cells for regenerative medicine, stem cells have attracted increasing attention from both academia and government. In vivo, stem cell differentiation is a process under complicated regulations to precisely build tissue with unique spatial structures. Since multicellular spheroidal aggregates of stem cells, commonly called as embryoid bodies (EBs), are considered to be capable of recapitulating the events in early stage of embryonic development, a variety of methods have been developed to form EBs in vitro for studying differentiation of embryonic stem cells. The regulation of stem cell differentiation is crucial in directing stem cells to build tissue with the correct spatial architecture for specific functions. However, stem cells within the three-dimensional multicellular aggregates undergo differentiation in a less unpredictable and spatially controlled manner in vitro than in vivo. Recently, various microengineering technologies have been developed to manipulate stem cells in vitro in a spatially controlled manner. Herein, we take the spotlight on these technologies and researches that bring us the new potential for manipulation of stem cells for specific purposes.

Direct writing electrodes using a ball pen for paper-based point-of-care testing.

The integration of paper with an electrochemical device has attracted growing attention for point-of-care testing, where it is of great importance to fabricate electrodes on paper in a low-cost, easy and versatile way. In this work, we report a simple strategy for directly writing electrodes on paper using a pressure-assisted ball pen to form a paper-based electrochemical device (PED). This method is demonstrated to be capable of fabricating electrodes on paper with good electrical conductivity and electrochemical performance, holding great potential to be employed in point-of-care applications, such as in human health diagnostics and food safety detection. As examples, the PEDs fabricated using the developed method are applied for detection of glucose in artificial urine and melamine in sample solutions. Furthermore, our developed strategy is also extended to fabricate PEDs with multi-electrode arrays and write electrodes on non-planar surfaces (e.g., paper cup, human skin), indicating the potential application of our method in other fields, such as fabricating biosensors, paper electronics etc.

[Efficient and rapid liquid reduction animal model].

To investigate the practicability of establishing zebrafish lipid-lowering drug screening model and the effect of berberine (BBR) on hyperlipidemic zebrafish. Three-month-old zebrafishes were fed with 4% cholesterol for 0, 2, 4, 8, 14, 20, 25, 30 days, and the level of total cholesterol in serum was measured. Zebrafish were randomly divided into four groups: the control group, the high cholesterol diet group, the 0.01% simvastatin-treated group, the 0.1% berberine-treated group and the 0.2% berberine-treated group. The levels of total cholesterol (TC), triglyceride (TC), low density lipoprotein cholesterol (LDL-c) and high-density lipoprotein cholesterol (HDL-c) in serum were measured; the expression of hepatic HMGCR, LDLR and CYP7A1a mRNA expressions were detected by real time PCR. Oil red O staining was performed to observe the changes in fat content in the liver. According to the result, the level of serum TC in the 4% cholesterol diet group significantly was higher than that of the normal control group in a time-dependent manner and reached a stable level at the 20th day. The BBR group showed significant decreases in the levels of TC, TG and LDL-c, HMGCR mRNA expression and fat content and increases in LDLR and CYP7A1a mRNA. The hyperlipidemia zebrafish model was successfully established by feeding with 4% cholesterol for 20 days. The findings lay a foundation for further screenings on lipid-lowering drugs.

Curvature induces active velocity waves in rotating spherical tissues.

The multicellular organization of diverse systems, including embryos, intestines, and tumors relies on coordinated cell migration in curved environments. In these settings, cells establish supracellular patterns of motion, including collective rotation and invasion. While such collective modes have been studied extensively in flat systems, the consequences of geometrical and topological constraints on collective migration in curved systems are largely unknown. Here, we discover a collective mode of cell migration in rotating spherical tissues manifesting as a propagating single-wavelength velocity wave. This wave is accompanied by an apparently incompressible supracellular flow pattern featuring topological defects as dictated by the spherical topology. Using a minimal active particle model, we reveal that this collective mode arises from the effect of curvature on the active flocking behavior of a cell layer confined to a spherical surface. Our results thus identify curvature-induced velocity waves as a mode of collective cell migration, impacting the dynamical organization of 3D curved tissues.

[New photosensitiser 5-ALA-GNPs for photodynamic therapy and its spectral analysis].

A novel strategy by means of poly diallyl dimethylammonium chloride (PDDA) was used to make highly mono-dispersed positively charged gold nanoparticles, and 5-ALA was immobilized onto the gold nanoparticles through electrostatic interaction. The conjugation of 5-aminolevulinic acid (5-ALA) and gold nanopartilces were characterized by the integrated tools of resonance Rayleigh scattering (RRS), UV-Vis absorption spectra, transmission electron microscopy (TEM) and laser light scattering. The results demonstrated that 5-ALA can be attached onto positively charged gold nanoparticles. This new photosensitizer is significant for enhancing PDT efficacy clinically.

Generation of the Compression-induced Dedifferentiated Adipocytes (CiDAs) Using Hypertonic Medium.

Current methods to obtain mesenchymal stem cells (MSCs) involve sampling, culturing, and expanding of primary MSCs from adipose, bone marrow, and umbilical cord tissues. However, the drawbacks are the limited numbers of total cells in MSC pools, and their decaying stemness during in vitro expansion. As an alternative resource, recent ceiling culture methods allow the generation of dedifferentiated fat cells (DFATs) from mature adipocytes. Nevertheless, this process of spontaneous dedifferentiation of mature adipocytes is laborious and time-consuming. This paper describes a modified protocol for in vitro dedifferentiation of adipocytes by employing an additional physical stimulation, which takes advantage of augmenting the stemness-related Wnt/ß-catenin signaling. Specifically, this protocol utilizes a polyethylene glycol (PEG)-containing hypertonic medium to introduce extracellular physical stimulation to obtain higher efficiency and introduce a simpler procedure for adipocyte dedifferentiation.

A novel jamming phase diagram links tumor invasion to non-equilibrium phase separation.

It is well established that the early malignant tumor invades surrounding extracellular matrix (ECM) in a manner that depends upon material properties of constituent cells, surrounding ECM, and their interactions. Recent studies have established the capacity of the invading tumor spheroids to evolve into coexistent solid-like, fluid-like, and gas-like phases. Using breast cancer cell lines invading into engineered ECM, here we show that the spheroid interior develops spatial and temporal heterogeneities in material phase which, depending upon cell type and matrix density, ultimately result in a variety of phase separation patterns at the invasive front. Using a computational approach, we further show that these patterns are captured by a novel jamming phase diagram. We suggest that non-equilibrium phase separation based upon jamming and unjamming transitions may provide a unifying physical picture to describe cellular migratory dynamics within, and invasion from, a tumor.

Gap junctions amplify spatial variations in cell volume in proliferating tumor spheroids.

Sustained proliferation is a significant driver of cancer progression. Cell-cycle advancement is coupled with cell size, but it remains unclear how multiple cells interact to control their volume in 3D clusters. In this study, we propose a mechano-osmotic model to investigate the evolution of volume dynamics within multicellular systems. Volume control depends on an interplay between multiple cellular constituents, including gap junctions, mechanosensitive ion channels, energy-consuming ion pumps, and the actomyosin cortex, that coordinate to manipulate cellular osmolarity. In connected cells, we show that mechanical loading leads to the emergence of osmotic pressure gradients between cells with consequent increases in cellular ion concentrations driving swelling. We identify how gap junctions can amplify spatial variations in cell volume within multicellular spheroids and, further, describe how the process depends on proliferation-induced solid stress. Our model may provide new insight into the role of gap junctions in breast cancer progression.

Compression-induced dedifferentiation of adipocytes promotes tumor progression.

Dysregulated physical stresses are generated during tumorigenesis that affect the surrounding compliant tissues including adipocytes. However, the effect of physical stressors on the behavior of adipocytes and their cross-talk with tumor cells remain elusive. Here, we demonstrate that compression of cells, resulting from various types of physical stresses, can induce dedifferentiation of adipocytes via mechanically activating Wnt/ß-catenin signaling. The compression-induced dedifferentiated adipocytes (CiDAs) have a distinct transcriptome profile, long-term self-renewal, and serial clonogenicity, but do not form teratomas. We then show that CiDAs notably enhance human mammary adenocarcinoma proliferation both in vitro and in a xenograft model, owing to myofibrogenesis of CiDAs in the tumor-conditioned environment. Collectively, our results highlight unique physical interplay in the tumor ecosystem; tumor-induced physical stresses stimulate de novo generation of CiDAs, which feedback to tumor growth.

Cell swelling, softening and invasion in a three-dimensional breast cancer model.

Sculpting of structure and function of three-dimensional multicellular tissues depend critically on the spatial and temporal coordination of cellular physical properties, yet the organizational principles that govern these events, and their disruption in disease, remain poorly understood. Using a multicellular mammary cancer organoid model, here we map in three dimensions the spatial and temporal evolution of positions, motions, and physical characteristics of individual cells. Compared with cells in the organoid core, cells at the organoid periphery and the invasive front are found to be systematically softer, larger and more dynamic. These mechanical changes are shown to arise from supracellular fluid flow through gap junctions, suppression of which delays transition to an invasive phenotype. Together, these findings highlight the role of spatiotemporal coordination of cellular physical properties in tissue organization and disease progression.

Downregulation of microRNA-193-3p inhibits the progression of intrahepatic cholangiocarcinoma cells by upregulating TGFBR3.

The aim of this study was to investigate the function of microRNA (miR)-193-3p in human intrahepatic cholangiocarcinoma (ICC) tissues and cells. To evaluate whether miR-193-3p was aberrantly upregulated, we used reverse transcription-quantitative polymerase chain reaction to detect the level of miR-193-3p in ICC tissues and ICC-9810 cells. The effects of miR-193-3p downregulation on ICC cell proliferation, migration and invasion were also measured by MTT, wound-healing and Transwell assays. Additionally, transforming growth factor-ß receptor type 3 (TGFBR3) was investigated as a direct target of miR-193-3p by dual-luciferase reporter assays and western blot analyses. The results demonstrated that miR-193-3p was aberrantly upregulated in ICC tissues and cell lines. Furthermore, TGFBR3 was confirmed to be a target of miR-193-3p in ICC and was notably upregulated by miR-193-3p knockdown in the ICC-9810 cells. The knockdown of miR-193-3p also exerted direct inhibitory effects on the proliferation, migration and invasion of the ICC-9810 cells. Therefore, we present evidence that miR-193-3p plays a key role in promoting human ICC by regulating TGFBR3.

Liquid on Paper: Rapid Prototyping of Soft Functional Components for Paper Electronics.

This paper describes a novel approach to fabricate paper-based electric circuits consisting of a paper matrix embedded with three-dimensional (3D) microchannels and liquid metal. Leveraging the high electric conductivity and good flowability of liquid metal, and metallophobic property of paper, it is possible to keep electric and mechanical functionality of the electric circuit even after a thousand cycles of deformation. Embedding liquid metal into paper matrix is a promising method to rapidly fabricate low-cost, disposable, and soft electric circuits for electronics. As a demonstration, we designed a programmable displacement transducer and applied it as variable resistors and pressure sensors. The unique metallophobic property, combined with softness, low cost and light weight, makes paper an attractive alternative to other materials in which liquid metal are currently embedded.

BioPen: direct writing of functional materials at the point of care.

Rapid and precise patterning of functional biomaterials is desirable for point-of-care (POC) tissue engineering and diagnostics. However, existing technologies such as dip-pen nanolithography and inkjet printing are currently unsuitable for POC applications due to issues of cost and portability. Here, we report the development of 'BioPen', a portable tool for continuous, defined and scalable deposition of functional materials with micrometer spatial resolution and nanolitre volumetric resolution. BioPen is based upon the ballpoint pen but with multiple "ink sources" (functional material solutions) and with an apparatus that can be optimized for writing living cells, proteins, nucleic acids, etc. We demonstrate POC detection of human immunodeficiency virus type 1 (HIV-1) nucleic acid by writing on paper with BioPen using "ink" consisting of nucleic acid probes and nucleic acid-modified gold nanoparticles. We also demonstrate POC tissue engineering by writing a continuous pattern of living, functional, interconnected cells with a defined extracellular environment. Because it is simple, accurate, inexpensive and portable, BioPen has broad potential for POC detection of diagnostic biomarkers, and for POC engineering of tissues for a range of healing applications.

Engineering physical microenvironment for stem cell based regenerative medicine.

Regenerative medicine has rapidly evolved over the past decade owing to its potential applications to improve human health. Targeted differentiations of stem cells promise to regenerate a variety of tissues and/or organs despite significant challenges. Recent studies have demonstrated the vital role of the physical microenvironment in regulating stem cell fate and improving differentiation efficiency. In this review, we summarize the main physical cues that are crucial for controlling stem cell differentiation. Recent advances in the technologies for the construction of physical microenvironment and their implications in controlling stem cell fate are also highlighted.

Oligonucleotide-linked gold nanoparticle aggregates for enhanced sensitivity in lateral flow assays.

Lateral flow assays (LFAs) as rapid analytical techniques promise to be widely used in point-of-care (POC) diagnostics because of their affordability and simplicity. However, LFAs still suffer from low sensitivity in detection of various biomarkers, e.g., nucleic acids. In this study, we developed a simple and general one-step signal amplification strategy, which employed oligonucleotide-linked gold nanoparticle (AuNP) aggregates to enhance the sensitivity in nucleic acid lateral flow (NALF) assays. Using a nucleic acid sequence of human immunodeficiency virus type 1 (HIV-1) as a model analyte, we observed that the detection limit of the developed NALF assay was 0.1 nM, which was improved by 2.5-fold compared with that of a non-signal amplification approach. The methodology described here could be used to detect a broad range of nucleic acids, and the general signal amplification approach could be potentially adopted in other types of LFAs.

Directed self-assembly of microscale hydrogels by electrostatic interaction.

The unique benefit of electrostatic self-assembly of microscale components in solution is demonstrated for the first time. In particular, positive and negative treatment of poly(ethylene glycol) (PEG) facilitates a novel bottom-up assembly approach using electrostatic interaction from microgels with opposite charges. Fundamental investigations of electrostatic interaction of microgels reveal that the contact area of microgels determines the total energy of construct and thus the final patterns. The electrostatic self-assembly approach enables the fabrication of large and complex biological related structures (e.g., multi-layer spheroid) with accurate control. By the design of the microgels, the thickness and number of microgels in each layer can be controlled. Biological investigations of positive and negative treatments of PEG further prove the possibility of using this approach in tissue engineering, regenerative medicine and drug delivery.