RESUMEN
Despite recent advances in contrast-enhanced ultrasound imaging, evaluation of tissue perfusion with contrast-enhanced ultrasound is still impaired by shadowing effects. These effects are particularly relevant in small animal studies due to high frequency imaging. Current methods of tissue attenuation correction are not suited for contrast-enhanced ultrasound examinations, because microbubble acoustic response to ultrasound waves is far more complex than that of tissues. A method allowing in vivo tissue attenuation correction in the presence of contrast agents is presented.
Asunto(s)
Medios de Contraste , Aumento de la Imagen/métodos , Procesamiento de Imagen Asistido por Computador/métodos , Ultrasonografía/métodos , Animales , Medios de Contraste/farmacocinética , Difusión , Riñón/irrigación sanguínea , Riñón/diagnóstico por imagen , Ratones , Microburbujas , Microcirculación/diagnóstico por imagen , Modelos Teóricos , Transductores , Ultrasonografía/instrumentaciónRESUMEN
Many methods have been proposed to extract pressure gradient maps from magnetic resonance (MR) images. They were based on the resolution of the haemodynamic model of Navier-Stokes and needed the flow acceleration to be known. Most used velocity data acquisition and computed acceleration from temporal and spatial derivatives of the velocity field. However, MR sequences have been developed in order to acquire the acceleration field directly. Here we compared direct MR measurements of acceleration field components with those calculated from MR velocity acquisitions. Two experimental phantoms were used to separately evaluate the inertial and convective components of the acceleration. Mathematical simulation of the convective phantom further explained the origin of the noise generated by the spatial and temporal derivatives of the velocity data, and the misregistration artefacts due to MR sequences. We found that direct measurement of the acceleration field generates less noise and fewer artefacts than calculation from velocity derivatives.
Asunto(s)
Imagen por Resonancia Magnética/métodos , Presión , Aceleración , Humanos , Procesamiento de Imagen Asistido por Computador , Modelos Teóricos , Oscilometría , Fantasmas de Imagen , Factores de TiempoRESUMEN
An original strategy is proposed to minimize the impact of respiratory motion on hepatic contrast-enhanced ultrasound studies. It is based on the a posteriori triggering of dynamic image sequences. It was tested on perfusion studies acquired with a high temporal resolution (8 images s-1) to enable parametric imaging. A respiratory component was first estimated by independent component analysis. The estimation of the local minima and maxima of this curve enabled us to select two subsets of frames, corresponding to the end-of-inspiration plane and to the end-of-expiration plane. Both subsets were simultaneously analysed using factor analysis of medical image sequences. This method identified the main contrast uptake kinetics and their associated localizations. The global strategy was validated firstly on a simulated study and then applied to 11 patients' studies. In both cases, the frame selection was judged relevant and a necessary preliminary step before applying methods of parametric imaging. In conclusion, the a posteriori gating method that is proposed is a first step towards local quantification of hepatic contrast-enhanced ultrasound studies.
Asunto(s)
Simulación por Computador , Medios de Contraste , Interpretación de Imagen Asistida por Computador , Hígado/diagnóstico por imagen , Movimiento (Física) , Respiración , Humanos , Aumento de la Imagen , Perfusión , UltrasonografíaRESUMEN
The computerized study of the regional contraction of the left ventricle has undergone numerous developments, particularly in relation to echocardiography. A new method, parametric analysis of main motion (PAMM), is proposed in order to synthesize the information contained in a cine loop of images in parametric images. PAMM determines, for the intensity variation time curves (IVTC) observed in each pixel, two amplitude coefficients characterizing the continuous component and the alternating component; the variable component is generated from a mother curve by introducing a time shift coefficient and a scale coefficient. Two approaches, a PAMM data driven and a PAMM model driven (simpler and faster), are proposed. On the basis of the four coefficients, an amplitude image and an image of mean contraction time are synthesized and interpreted by a cardiologist. In all cases, both PAMM methods allow better IVTC adjustment than the other methods of parametric imaging used in echocardiography. A preliminary database comprising 70 segments is scored and compared with the visual analysis, taken from a consensus of two expert interpreters. The levels of absolute and relative concordance are 79% and 97%. PAMM model driven is a promising method for the rapid detection of abnormalities in left ventricle contraction.
Asunto(s)
Ecocardiografía , Contracción Miocárdica , Función Ventricular Izquierda , Algoritmos , Análisis Factorial , Análisis de Fourier , Humanos , Procesamiento de Imagen Asistido por Computador , Movimiento (Física)RESUMEN
Post-operative deformation of the aortic arch architecture is associated with an increased risk of hypertension following correction of coarctation. In addition to morphological analysis, MRI allows a functional analysis of the thoracic aorta. We report three examples which illustrate the direct relationship between aortic arch morphology and blood flow in the thoracic aorta.
Asunto(s)
Aorta Torácica/anatomía & histología , Coartación Aórtica/cirugía , Hipertensión/etiología , Adolescente , Aorta Torácica/anomalías , Humanos , Masculino , Pronóstico , Flujo Sanguíneo Regional , Factores de RiesgoRESUMEN
The noninvasive detection of pathological stenoses by Doppler ultrasound velocimetry is based on the appearance of modifications in velocity waveform or of a local increase in velocity. Nevertheless, these methods suffer from a lack of sensitivity. An extension of ultrasonic velocimetry including a statistical treatment of the Doppler signals affords a quantitative approach to the flow quality and seems to be able to improve the diagnosis of vascular obliterans. Accordingly a perturbation index can be computed on a microprocessor as the relative standard deviation of the zero-crossings histogram of the Doppler signal. A theoretical and experimental approach has been attempted to validate this method. Moreover, this index has been tested in vitro on calibrated flows. The in vivo experiments, performed on the abdominal aorta of the dog with artificial stenoses (0 to 50% in diameter) show a significant increase in the index value downstream from the stenosis. The relative increase of the index is greater than that of velocities for the same degree of obstruction. At the moment, it is possible to detect stenoses of 20% and above. It should be noted that changes in the perturbation index can be observed on a large part of the arterial segment, in relation with the severity of teh stenosis. Taking into account the increase in the index value and the length of the disturbed zone downstream of the stenosis, an estimation of the severity itself can be attempted. Clinical applications are in progress pointing out the diagnostic and prognostic abilities of the index method. The index perturbation method adds to velocity measurement the possibility of blood flow stability estimation. It appears useful for the localisation of stenoses, offers the possibility of quantifying their severity and could help the prognosis of their development.
Asunto(s)
Aorta Abdominal/fisiopatología , Velocidad del Flujo Sanguíneo , Ultrasonografía , Animales , Constricción Patológica/fisiopatología , Perros , Flujo Sanguíneo Regional , Reología , Estadística como AsuntoRESUMEN
UNLABELLED: The use of H(2)(15)O PET scans for the measurement of myocardial perfusion reserve (MPR) has been validated in both animal models and humans. Nevertheless, this protocol requires cumbersome acquisitions such as C(15)O inhalation or (18)F-FDG injection to obtain images suitable for determining myocardial regions of interest. Regularized factor analysis is an alternative method proposed to define myocardial contours directly from H(2)(15)O studies without any C(15)O or FDG scan. The study validates this method by comparing the MPR obtained by the regularized factor analysis with the coronary flow reserve (CFR) obtained by intracoronary Doppler as well as with the MPR obtained by an FDG acquisition. METHODS: Ten healthy volunteers and 10 patients with ischemic cardiopathy or idiopathic dilated cardiomyopathy were investigated. The CFR of patients was measured sonographically using a Doppler catheter tip placed into the proximal left anterior descending artery. The mean velocity was recorded at baseline and after dipyridamole administration. All subjects underwent PET imaging, including 2 H(2)(15)O myocardial perfusion studies at baseline and after dipyridamole infusion, followed by an FDG acquisition. Dynamic H(2)(15)O scans were processed by regularized factor analysis. Left ventricular cavity and anteroseptal myocardial regions of interest were drawn independently on regularized factor images and on FDG images. Myocardial blood flow (MBF) and MPR were estimated by fitting the H(2)(15)O time-activity curves with a compartmental model. RESULTS: In patients, no significant difference was observed among the 3 methods of measurement-Doppler CFR, 1.73 +/- 0.57; regularized factor analysis MPR, 1.71 +/- 0.68; FDG MPR, 1.83 +/- 0.49-using a Friedman 2-way ANOVA by ranks. MPR measured with the regularized factor images correlated significantly with CFR (y = 1.17x - 0.30; r = 0.97). In the global population, the regularized factor analysis MPR and FDG MPR correlated strongly (y = 0.99x; r = 0.93). Interoperator repeatability on regularized factor images was 0.126 mL/min/g for rest MBF, 0.38 mL/min/g for stress MBF, and 0.34 for MPR (19% of mean MPR). CONCLUSION: Regularized factor analysis provides well-defined myocardial images from H(2)(15)O dynamic scans, permitting an accurate and simple measurement of MPR. The method reduces exposure to radiation and examination time and lowers the cost of MPR protocols using a PET scanner.
Asunto(s)
Cardiomiopatía Dilatada/diagnóstico por imagen , Circulación Coronaria/fisiología , Corazón/diagnóstico por imagen , Tomografía Computarizada de Emisión , Análisis de Varianza , Cardiomiopatía Dilatada/fisiopatología , Estudios de Casos y Controles , Ecocardiografía Doppler , Análisis Factorial , Femenino , Fluorodesoxiglucosa F18 , Humanos , Masculino , Persona de Mediana Edad , Radioisótopos de Oxígeno , Radiofármacos , Tomografía Computarizada de Emisión/métodos , AguaRESUMEN
A three-dimensional (3D) reconstruction of the vessel lumen from two angiographic views, based on the reconstruction of a series of cross-sections, is proposed. Assuming uniform mixing of contrast medium and background subtraction, the cross-section of each vessel is reconstructed through a binary representation. A priori information about both the slice to be reconstructed and the relationships between adjacent slices are incorporated to lessen ambiguities on the reconstruction. Taking into account the knowledge of normal vessel geometry, an initial solution of each slice is created using an elliptic model-based method. This initial solution is then deformed to be made consistent with projection data while being constrained into a connected realistic shape. For that purpose, properties on the expected optimal solution are described through a Markov random field. To find an optimal solution, a specific optimization algorithm based on simulated annealing is used. The method performs well both on single vessels and on branching vessels possessing an additional inherent ambiguity when viewed at oblique angles. Results on 2D slice independent reconstruction and 3D reconstruction of a stack of spatially continuous 2D slices are presented for single vessels and bifurcations.
RESUMEN
This paper describes a motion detection method specific to hybrid positron emission tomography/single photon emission computed tomography systems. The method relies on temporal fractionation of the acquisition into three data sets followed by an algorithm based on the cross correlation (CC) of partial sinograms from successive sets at different rotations of the camera. Spatial inconsistencies due to motion are detected by decreases in the CC between two sets. This permits to separate data into premotion and postmotion sets of consistent data that are reconstructed independently then registered and summed. Rigid motions greater than 1-cm translation or 10 degrees rotation were detected with this method from experimental data obtained by manually moving phantoms made of radioactive spheres as well as from a patient lung study corrupted by artificial motion. The different motion studies showed that the image contrast does not seem to be a limiting factor and that the motion is best detected when the gantry is parallel to the direction of motion. The registration and fusion of the reconstructed premotion and postmotion sets lead in all cases to a reduction of the motion artifacts and an increase in signal-to-noise ratio.
Asunto(s)
Interpretación de Imagen Asistida por Computador/métodos , Procesamiento de Señales Asistido por Computador/instrumentación , Tomografía Computarizada de Emisión de Fotón Único/métodos , Tomografía Computarizada de Emisión/métodos , Algoritmos , Artefactos , Movimiento (Física)RESUMEN
Dynamic image sequences allow physiological mechanisms to be monitored after the injection of a tracer. Factor analysis of medical image sequences (FAMIS) hence creates a synthesis of the information in one image sequence. It estimates a limited number of structures (factor images) assuming that the tracer kinetics (factors) are similar at each point inside the structure. A spatial regularization method for computing factor images (REG-FAMIS) is proposed to remove irregularities due to noise in the original data while preserving discontinuities between structures. REG-FAMIS has been applied to two sets of simulations: (a) dynamic data with Gaussian noise and (b) dynamic studies in emission tomography (PET or SPECT), which respect real tomographic acquisition parameters and noise characteristics. Optimal regularization parameters are estimated in order to minimize the distance between reference images and regularized factor images. Compared with conventional factor images, the root mean square error between regularized images and reference factor images is improved by 3 for the first set of simulations, and by about 1.5 for the second set of simulations. In all cases, regularized factor images are qualitatively and quantitatively improved.
Asunto(s)
Análisis Factorial , Procesamiento de Imagen Asistido por Computador , Algoritmos , Artefactos , Simulación por Computador , Aumento de la Imagen/métodos , Cinética , Modelos Estadísticos , Tomografía Computarizada de EmisiónRESUMEN
The velocity fields of turbulent jets can be described using a single formula which includes two empirical constants: k(core) determining the length of the central core and k(turb) the jet widening. Flow models simulating jet adhesion, confinement and noncircular orifices were studied using laser Doppler anemometer and the modifications of the constants were derived from series of velocity profiles. In circular free jets, k(core) was found equal to 4.1 with a variability of 1.4%. In complex configurations, its variability was equal to 15.2%. For k(turb), the value for free circular jets was of 45.2 with a variability of 6.0% and this variability in complex configurations was significantly higher (30. 1%, p=0.025). The correlation between the actual orifice size and the jet extension was poor (r=0.52). However, the almost constant value of k(core) allowed to define a new algorithm calculating the regurgitant orifice diameter with the use of outlines of the jet image (r=0.89). In conclusion, the fluid mechanics of regurgitant jets is modified in complex configurations but, due to the relative independency of the central core, velocity fields could be used to evaluate the dimensions of the effective regurgitant orifice.
Asunto(s)
Insuficiencia de la Válvula Aórtica/fisiopatología , Válvula Aórtica/patología , Hemorreología , Insuficiencia de la Válvula Mitral/fisiopatología , Válvula Mitral/patología , Modelos Cardiovasculares , Insuficiencia de la Válvula Tricúspide/fisiopatología , Válvula Tricúspide/patología , Algoritmos , Velocidad del Flujo Sanguíneo/fisiología , Humanos , Flujometría por Láser-DopplerRESUMEN
To evaluate the potential of harmonic power Doppler to quantify perfusion using a continuous infusion of contrast, two dialysis cartridges were perfused with different flow rates adjusted between 0 to 300 mL/min, corresponding to flow ratios comprised between 300:0 and 150:150. The contrast agent (Levovist, Schering) was injected at constant rates (0.6 to 5 g/h). Sequential pairs of images showing simultaneously the cross-sections of the two filters were acquired with a HDI 5000 (ATL) and the Doppler data were processed with HDI lab software (ATL). The absolute values of the signal in the different regions-of-interest (ROI) were not closely related to flow rate. At the opposite, the rapid signal decrease between the first and the second image of each pair was inversely proportional to the flow rate. An index of perfusion [PerI = image 1/(image 1 -- image 2)] was defined. It correlated closely with the absolute and relative flow rates. For the latter, the slopes of regression were found to be independent of the infusion rate of Levovist. Thus, the use of pairs of images combined with a continuous infusion of Levovist provide a quantification of perfusion.
Asunto(s)
Medios de Contraste/administración & dosificación , Polisacáridos/administración & dosificación , Ultrasonografía Doppler en Color/métodos , Velocidad del Flujo Sanguíneo/fisiología , Técnicas In Vitro , Infusiones Intravenosas , Modelos Biológicos , Flujo Sanguíneo Regional/fisiologíaRESUMEN
To evaluate the effectiveness of contrast harmonic (power Doppler imaging) as an ultrasonic modality to quantify flow, an in vitro model of perfusion was studied using Optison, a second-generation ultrasound (US) contrast agent. The in vitro model was made of two dialysis cartridges placed parallel and allowed absolute and relative flow quantification on both tube (entry lines) and tissue (cartridges) simulations. Video intensity curves were generated using intermittent harmonic power Doppler imaging after bolus injection of contrast. Correlation between flow and different parameters extracted from time-intensity curves and previously defined as indicators of flow was established for both tissue and entry lines, for flow rates ranging from 0 to 400 mL/min. Single-compartment equations were also tested on the model. A good correlation for the tissue model was observed between absolute flow and onset time (O), time to maximal enhancement (TME), peak intensity (P), area under the curve (AUC), and maximal ascending slope (S) parameters, with a r = 0.94, 0.94, 0.91, 0.92 and 0.92, respectively. The correlation for O, TME, P and AUC parameters was r = 0.86, 0.90, 0.78 and 0.82, respectively for entry lines. The correlation for tissue model and entry line was slightly improved when comparing flow ratios with peak ratios (P1/P2) and slope ratios (S1/S2) (r = 0.95 and 0.94). Flow calculation using the gradient-relationship method also showed a good correlation (r = 0.88) with the experimental flow. The results obtained indicated that absolute and relative quantification of flow using PDI is feasible in tube and tissue models. Several clinical applications, namely in myocardial, hepatic and renal artery studies, could be derived from these results.
Asunto(s)
Ultrasonografía Doppler , Albúminas , Área Bajo la Curva , Medios de Contraste , Diseño de Equipo , Fluorocarburos , Procesamiento de Imagen Asistido por Computador , Modelos Lineales , Modelos Estructurales , Perfusión , ReologíaRESUMEN
The color Doppler estimator (CE1), which is calculated from the phase of the first correlation lag of the Doppler signal, is compared to the general mean frequency estimator (CEn), which is based on a weighted summation of all the available correlation lags, for long and short Doppler data sets (typically 48 and 8 Doppler samples). A new estimator of the Doppler signal mean frequency is derived from the results of this study. It optimizes the compromise between the range of analyzable frequencies and the estimation variance for the characteristics of the Doppler signal. Demonstration is provided that the behavior of this estimator shifts from that of CE1 to that of CEn, according to the setting of a single parameter. An adaptive version of this estimator is implemented and applied to Doppler recordings. Applications can be contemplated for color Doppler imaging.
Asunto(s)
Ultrasonido , Algoritmos , Matemática , Ultrasonografía/métodosRESUMEN
Autoregressive (AR) modelling has already been proposed as an alternative to fast Fourier transform to process ultrasound (US) Doppler signals. Previous works introduced long AR models, set up under a regularization framework. The latter may be in 1-D (frequency) or 2-D (frequency and space or time). This study generalizes the spectrum regularization in the three dimensions frequency, space and time. The problem of the penalization function is addressed, and a new convex solution is proposed, taking into account possible nonstationarity of the Doppler signal. The parameter tuning is based on simulations using a standard Doppler signal model. The first results show that this processing improves the spectral estimation, and is well suited to flow interpretation.
Asunto(s)
Arterias Carótidas/diagnóstico por imagen , Procesamiento de Señales Asistido por Computador , Ultrasonografía Doppler/métodos , Algoritmos , Análisis de Fourier , Corazón/fisiología , Humanos , Modelos TeóricosRESUMEN
An adaptive mean frequency estimator is proposed for color flow imaging. It is based on a series expansion of the first derivative of the autocorrelation function of the Doppler signal at origin. Its bias can be reduced by shifting the integration bounds in the series expansion and its variance adjusted by adapting the coefficients of the serial development. This estimator can be fitted to the specific characteristics of the clutter rejection filter using the signal-to-noise ratio (SNR) of the Doppler signal as an adaptive parameter. Its performance is compared to that of the usual correlation angle estimator, and its thresholded version, as well as that of the general mean frequency estimator, using a model of Doppler signal. The detection of low frequencies was significantly improved. The mean square error (MSE) was reduced an average 15 fold over a 25-dB range on the SNR, compared to the correlation angle estimator (CAE) or the general mean frequency estimator. A two-fold reduction in the MSE was obtained compared to the thresholded correlation angle estimator.
Asunto(s)
Ecocardiografía Doppler en Color/normas , Aumento de la Imagen/métodos , Artefactos , Modelos Teóricos , Procesamiento de Señales Asistido por ComputadorRESUMEN
The paper presents a method to model an arterial bifurcation from a pair of X-ray angiographic images. It is the initial step of a reconstruction process aiming at detecting and quantifying abnormal sites located on bifurcations. The method proposed consists of two steps. First, each image is independently segmented to extract the vessels in the images. The algorithm uses dynamic programming first to find the bifurcation centrelines from the original images, and secondly to extract vessel edges from the morphological gradient images, under a constraint of parallelism with the previously detected centrelines. Then, a three-dimensional bifurcation model is built by adapting cylinders around the three-dimensional bifurcation centrelines. These cylinders are obtained as a stack of binary orientable ellipses fitted to the projection densities in the corresponding cross-sections. Results obtained on simulated data, phantom and femoral bifurcations are displayed.
Asunto(s)
Angiografía de Substracción Digital/métodos , Modelos Cardiovasculares , Arteria Femoral/diagnóstico por imagen , Humanos , Arteria Ilíaca/diagnóstico por imagen , Matemática , Modelos EstructuralesRESUMEN
A simple method for the improvement of the definition of the instantaneous spectrum estimate of Doppler signal is proposed. A short review of the stochastical properties of FFT spectrum estimates is presented. This review allowed us to develop a concept of the 'estimation noise' as an interpretation of the stochastic uncertainty of the estimation. This, in turn, permitted us to propose a method of adaptive filtering of spectral estimation to minimise the effects of the 'estimation noise'. Proposed filtering in the frequency domain corresponds to a procedure known as smoothing of the estimate. Two different smoothing procedures are presented: classical, linear smoothing and nonlinear, homomorphic smoothing. The performances of the smoothed spectrum estimate are theoretically and experimentally studied, showing that their effectiveness depends mostly on the shape of the Doppler spectrum. Although smoothing always reduces the spectral resolution, the important limitation of the variance of estimation can be achieved without meaningful deterioration of the resolution in our application. Thus, the proposed procedures may sensibly improve the accuracy of the relationship between the shape of the spectrum and the flow parameters. As a result, more exact determination of flow characteristics such as stability or maximum velocity, even in cases of low signal-to-noise power ratio, should be possible.
Asunto(s)
Vasos Sanguíneos/diagnóstico por imagen , Ecocardiografía/métodos , Algoritmos , Velocidad del Flujo Sanguíneo , Simulación por Computador , HumanosRESUMEN
A class of adapted mean frequency estimators is proposed for color flow mapping. These estimators can be fitted to the specific characteristics of a given Doppler signal to optimize the compromise between the range of analysable frequencies and the variance of mean frequency estimation. A sub-optimal estimator is derived for real-time applications, and an adaptive criterion based on the Doppler signal variance is developed for color flow mapping applications. Its performance is compared to that of the usual correlation phase estimator on simulated Doppler signals and on synthetic Doppler images. An improvement in image quality is achieved, mainly for low signal-to-noise ratio Doppler signals.
RESUMEN
An automatic segmentation method has been developed for cardiovascular multimodality imaging. A "snake" model based on a curve shaping and an energy-minimizing process is used to detect blood-wall interfaces on Cine-CT, MRI and ultrasound images. Deformation of a reduced set of contour points was made according to a discretized global, regional and local minimum energy criterion. A continuous regional optimization process was also integrated into the deformation model, it takes into account a cubic spline interpolation and adaptive regularity constraints. The constraints provided rapid convergence toward a final contour position by successively stopping spline segments.