Fabrication of elastomeric scaffolds with curvilinear fibrous structures for heart valve leaflet engineering.

Native semi-lunar heart valves are composed of a dense fibrous network that generally follows a curvilinear path along the width of the leaflet. Recent models of engineered valve leaflets have predicted that such curvilinear fiber orientations would homogenize the strain field and reduce stress concentrations at the commissure. In the present work, a method was developed to reproduce this curvilinear fiber alignment in electrospun scaffolds by varying the geometry of the collecting mandrel. Elastomeric poly(ester urethane)urea was electrospun onto rotating conical mandrels of varying angles to produce fibrous scaffolds where the angle of fiber alignment varied linearly over scaffold length. By matching the radius of the conical mandrel to the radius of curvature for the native pulmonary valve, the electrospun constructs exhibited a curvilinear fiber structure similar to the native leaflet. Moreover, the constructs had local mechanical properties comparable to conventional scaffolds and native heart valves. In agreement with prior modeling results, it was found under quasi-static loading that curvilinear fiber microstructures reduced strain concentrations compared to scaffolds generated on a conventional cylindrical mandrels. Thus, this simple technique offers an attractive means for fabricating scaffolds where key microstructural features of the native leaflet are imitated for heart valve tissue engineering.

Decellularized tracheal extracellular matrix supports epithelial migration, differentiation, and function.

Tracheal loss is a source of significant morbidity for affected patients with no acceptable solution. Interest in engineering tracheal transplants has created a demand for small animal models of orthotopic tracheal transplantation. Here, we examine the use of a decellularized graft in a murine model of tracheal replacement. Fresh or decellularized tracheas harvested from age-matched female donor C57BL/6 mice were transplanted into syngeneic recipients. Tracheas were decellularized using repeated washes of water, 3% Triton X-100, and 3 M NaCl under cyclic pressure changes, followed by disinfection with 0.1% peracetic acid/4% ethanol, and terminal sterilization by gamma irradiation. Tracheas were explanted for immunolabeling at 1, 4, and 8 weeks following surgery. Video microscopy and computed tomography were performed to assess function and structure. Decellularized grafts supported complete reepithelialization by 8 weeks and motile cilia were observed. Cartilaginous portions of the trachea were maintained in mice receiving fresh transplants, but repopulation of the cartilage was not seen in mice receiving decellularized transplants. We observed superior postsurgical survival, weight gain, and ciliary function in mice receiving fresh transplants compared with those receiving decellularized transplants. The murine orthotopic tracheal transplant provides an appropriate model to assess the repopulation and functional regeneration of decellularized tracheal grafts.

Optimal elastomeric scaffold leaflet shape for pulmonary heart valve leaflet replacement.

Surgical replacement of the pulmonary valve (PV) is a common treatment option for congenital pulmonary valve defects. Engineered tissue approaches to develop novel PV replacements are intrinsically complex, and will require methodical approaches for their development. Single leaflet replacement utilizing an ovine model is an attractive approach in that candidate materials can be evaluated under valve level stresses in blood contact without the confounding effects of a particular valve design. In the present study an approach for optimal leaflet shape design based on finite element (FE) simulation of a mechanically anisotropic, elastomeric scaffold for PV replacement is presented. The scaffold was modeled as an orthotropic hyperelastic material using a generalized Fung-type constitutive model. The optimal shape of the fully loaded PV replacement leaflet was systematically determined by minimizing the difference between the deformed shape obtained from FE simulation and an ex-vivo microCT scan of a native ovine PV leaflet. Effects of material anisotropy, dimensional changes of PV root, and fiber orientation on the resulting leaflet deformation were investigated. In-situ validation demonstrated that the approach could guide the design of the leaflet shape for PV replacement surgery.