Multiple Method Analysis of TiO2 Nanoparticle Uptake in Rice (Oryza sativa L.) Plants.

Understanding the translocation of nanoparticles (NPs) into plants is challenging because qualitative and quantitative methods are still being developed and the comparability of results among different methods is unclear. In this study, uptake of titanium dioxide NPs and larger bulk particles (BPs) in rice plant (Oryza sativa L.) tissues was evaluated using three orthogonal techniques: electron microscopy, single-particle inductively coupled plasma mass spectroscopy (spICP-MS) with two different plant digestion approaches, and total elemental analysis using ICP optical emission spectroscopy. In agreement with electron microscopy results, total elemental analysis of plants exposed to TiO2 NPs and BPs at 5 and 50 mg/L concentrations revealed that TiO2 NPs penetrated into the plant root and resulted in Ti accumulation in above ground tissues at a higher level compared to BPs. spICP-MS analyses revealed that the size distributions of internalized particles differed between the NPs and BPs with the NPs showing a distribution with smaller particles. Acid digestion resulted in higher particle numbers and the detection of a broader range of particle sizes than the enzymatic digestion approach, highlighting the need for development of robust plant digestion procedures for NP analysis. Overall, there was agreement among the three techniques regarding NP and BP penetration into rice plant roots and spICP-MS showed its unique contribution to provide size distribution information.

Visualizing nanoparticle dissolution by imaging mass spectrometry.

We demonstrate the ability to visualize nanoparticle dissolution while simultaneously providing chemical signatures that differentiate between citrate-capped silver nanoparticles (AgNPs), AgNPs forced into dissolution via exposure to UV radiation, silver nitrate (AgNO3), and AgNO3/citrate deposited from aqueous solutions and suspensions. We utilize recently developed inkjet printing (IJP) protocols to deposit the different solutions/suspensions as NP aggregates and soluble species, which separate onto surfaces in situ, and collect mass spectral imaging data via time-of-flight secondary ion mass spectrometry (TOF-SIMS). Resulting 2D Ag(+) chemical images provide the ability to distinguish between the different Ag-containing starting materials and, when coupled with mass spectral peak ratios, provide information-rich data sets for quick and reproducible visualization of NP-based aqueous constituents. When compared to other measurements aimed at studying NP dissolution, the IJP-TOF-SIMS approach offers valuable information that can potentially help in understanding the complex equilibria in NP-containing solutions and suspensions, including NP dissolution kinetics and extent of overall dissolution.

Dynamics of silver nanoparticle release from wound dressings revealed via in situ nanoscale imaging.

The use of silver nanoparticles (AgNPs) in textiles for enhanced anti-microbial properties has led to concern about their release and impact on both human and environmental health. Here a novel method for in situ visualization of AgNP release from silver-impregnated wound dressings is introduced. By combining an environmental scanning electron microscope, a gaseous analytical detector and a peltier cooling stage, this technique provides near-instantaneous nanoscale characterization of interactions between individual water droplets and AgNPs. We show that dressings with different silver application methods have very distinct AgNP release dynamics. Specifically, water condensation on dressings with AgNP deposited directly on the fiber surface resulted in substantial and rapid AgNP release. By comparison, AgNP release from wound dressing with nanoparticles grown, not deposited, from the fiber surface was either much slower or negligible. Our methodology complements standard bulk techniques for studying of silver release from fabrics by providing dynamic nanoscale information about mechanisms governing AgNP release from individual fibers. Thus coupling these nano and macro-scale methods can provide insight into how the wound dressing fabrication could be engineered to optimize AgNP release for different applications.

Polyelectrolyte and silver nanoparticle modification of microfiltration membranes to mitigate organic and bacterial fouling.

Membrane fouling remains one of the most problematic issues surrounding membrane use in water and wastewater treatment applications. Organic and biological fouling contribute to irreversible fouling and flux decline in these processes. The aim of this study was to reduce both organic and biological fouling by modifying the surface of commercially available poly(ether sulfone) (PES) membranes using the polyelectrolyte multilayer modification method with poly(styrenesulfonate) (PSS), poly(diallyldimethylammonium chloride) (PDADMAC), and silver nanoparticles (nanoAg) integrated onto the surface as stable, thin (15 nm) films. PSS increases the hydrophilicity of the membrane and increases the negative surface charge, while integration of nanoAg into the top PSS layer imparts biocidal characteristics to the modified surface. Fouling was simulated by filtering aqueous solutions of humic acid (5 and 20 mg L(-1)), a suspension of Escherichia coli (10(6) colony-forming units (CFU) mL(-1)), and a mixture of both foulants through unmodified and modified PES membranes under batch conditions. Filtration and cleaning studies confirmed that the modification significantly reduced organic and biological fouling.

Copper oxide nanoparticle mediated DNA damage in terrestrial plant models.

Engineered nanoparticles, due to their unique electrical, mechanical, and catalytic properties, are presently found in many commercial products and will be intentionally or inadvertently released at increasing concentrations into the natural environment. Metal- and metal oxide-based nanomaterials have been shown to act as mediators of DNA damage in mammalian cells, organisms, and even in bacteria, but the molecular mechanisms through which this occurs are poorly understood. For the first time, we report that copper oxide nanoparticles induce DNA damage in agricultural and grassland plants. Significant accumulation of oxidatively modified, mutagenic DNA lesions (7,8-dihydro-8-oxoguanine; 2,6-diamino-4-hydroxy-5-formamidopyrimidine; 4,6-diamino-5-formamidopyrimidine) and strong plant growth inhibition were observed for radish (Raphanus sativus), perennial ryegrass (Lolium perenne), and annual ryegrass (Lolium rigidum) under controlled laboratory conditions. Lesion accumulation levels mediated by copper ions and macroscale copper particles were measured in tandem to clarify the mechanisms of DNA damage. To our knowledge, this is the first evidence of multiple DNA lesion formation and accumulation in plants. These findings provide impetus for future investigations on nanoparticle-mediated DNA damage and repair mechanisms in plants.

Preparation and measurement methods for studying nanoparticle aggregate surface chemistry.

Despite best efforts at controlling nanoparticle (NP) surface chemistries, the environment surrounding nanomaterials is always changing and can impart a permanent chemical memory. We present a set of preparation and measurement methods to be used as the foundation for studying the surface chemical memory of engineered NP aggregates. We attempt to bridge the gap between controlled lab studies and real-world NP samples, specifically TiO(2), by using well-characterized and consistently synthesized NPs, controllably producing NP aggregates with precision drop-on-demand inkjet printing for subsequent chemical measurements, monitoring the physical morphology of the NP aggregate depositions with scanning electron microscopy (SEM), acquiring "surface-to-bulk" mass spectra of the NP aggregate surfaces with time-of-flight secondary ion mass spectrometry (ToF-SIMS), and developing a data analysis scheme to interpret chemical signatures more accurately from thousands of data files. We present differences in mass spectral peak ratios for bare TiO(2) NPs compared to NPs mixed separately with natural organic matter (NOM) or pond water. The results suggest that subtle changes in the local environment can alter the surface chemistry of TiO(2) NPs, as monitored by Ti(+)/TiO(+) and Ti(+)/C(3)H(5)(+) peak ratios. The subtle changes in the absolute surface chemistry of NP aggregates vs. that of the subsurface are explored. It is envisioned that the methods developed herein can be adapted for monitoring the surface chemistries of a variety of engineered NPs obtained from diverse natural environments.

Potential release pathways, environmental fate, and ecological risks of carbon nanotubes.

Carbon nanotubes (CNTs) are currently incorporated into various consumer products, and numerous new applications and products containing CNTs are expected in the future. The potential for negative effects caused by CNT release into the environment is a prominent concern and numerous research projects have investigated possible environmental release pathways, fate, and toxicity. However, this expanding body of literature has not yet been systematically reviewed. Our objective is to critically review this literature to identify emerging trends as well as persistent knowledge gaps on these topics. Specifically, we examine the release of CNTs from polymeric products, removal in wastewater treatment systems, transport through surface and subsurface media, aggregation behaviors, interactions with soil and sediment particles, potential transformations and degradation, and their potential ecotoxicity in soil, sediment, and aquatic ecosystems. One major limitation in the current literature is quantifying CNT masses in relevant media (polymers, tissues, soils, and sediments). Important new directions include developing mechanistic models for CNT release from composites and understanding CNT transport in more complex and environmentally realistic systems such as heteroaggregation with natural colloids and transport of nanoparticles in a range of soils.

Dynamics and mechanisms of quantum dot nanoparticle cellular uptake.

BACKGROUND: The rapid growth of the nanotechnology industry and the wide application of various nanomaterials have raised concerns over their impact on the environment and human health. Yet little is known about the mechanism of cellular uptake and cytotoxicity of nanoparticles. An array of nanomaterials has recently been introduced into cancer research promising for remarkable improvements in diagnosis and treatment of the disease. Among them, quantum dots (QDs) distinguish themselves in offering many intrinsic photophysical properties that are desirable for targeted imaging and drug delivery. RESULTS: We explored the kinetics and mechanism of cellular uptake of QDs with different surface coatings in two human mammary cells. Using fluorescence microscopy and laser scanning cytometry (LSC), we found that both MCF-7 and MCF-10A cells internalized large amount of QD655-COOH, but the percentage of endocytosing cells is slightly higher in MCF-7 cell line than in MCF-10A cell line. Live cell fluorescent imaging showed that QD cellular uptake increases with time over 40 h of incubation. Staining cells with dyes specific to various intracellular organelles indicated that QDs were localized in lysosomes. Transmission electron microscopy (TEM) images suggested a potential pathway for QD cellular uptake mechanism involving three major stages: endocytosis, sequestration in early endosomes, and translocation to later endosomes or lysosomes. No cytotoxicity was observed in cells incubated with 0.8 nM of QDs for a period of 72 h. CONCLUSIONS: The findings presented here provide information on the mechanism of QD endocytosis that could be exploited to reduce non-specific targeting, thereby improving specific targeting of QDs in cancer diagnosis and treatment applications. These findings are also important in understanding the cytotoxicity of nanomaterials and in emphasizing the importance of strict environmental control of nanoparticles.

Association of quantum dot nanoparticles with Pseudomonas aeruginosa biofilm.

Quantum dots (QDs) of two different surface chemistries (carboxyl [COOH] and polyethylene glycol [PEG] modified) were utilized to determine the impact of surface functionality on QD mobility and distribution in Pseudomonas aeruginosa PAO1 biofilms. Confocal laser scanning microscopy was utilized to evaluate QD association with biofilm components (proteins, cells, and polysaccharides). Quantum dots did not preferentially associate with cell surfaces compared but did colocalize with extracellular proteins in the biofilm matrix. Neither PEG nor COOH QDs were found to be internalized by individual bacterial cells. Neither QD functionality nor flow rate of QD application (0.3 mL min(-1) or 3.0 mL min(-1)) resulted in a marked difference in QD association with P. aeruginosa biofilms. However, center of density determinations indicated COOH QDs could more easily penetrate the biofilm matrix by diffusion than PEG QDs. Biofilms with PEG QDs associated had rougher polysaccharide layers and rougher cell distribution than biofilms with COOH QDs. This work suggests natural biofilms may serve as deposition locations in natural and engineered environmental systems, and biofilm structural parameters may change based on exposure to nanomaterials of varied physical characteristics.

Anti-HER2 IgY antibody-functionalized single-walled carbon nanotubes for detection and selective destruction of breast cancer cells.

BACKGROUND: Nanocarrier-based antibody targeting is a promising modality in therapeutic and diagnostic oncology. Single-walled carbon nanotubes (SWNTs) exhibit two unique optical properties that can be exploited for these applications, strong Raman signal for cancer cell detection and near-infrared (NIR) absorbance for selective photothermal ablation of tumors. In the present study, we constructed a HER2 IgY-SWNT complex and demonstrated its dual functionality for both detection and selective destruction of cancer cells in an in vitro model consisting of HER2-expressing SK-BR-3 cells and HER2-negative MCF-7 cells. METHODS: The complex was constructed by covalently conjugating carboxylated SWNTs with anti-HER2 chicken IgY antibody, which is more specific and sensitive than mammalian IgGs. Raman signals were recorded on Raman spectrometers with a laser excitation at 785 nm. NIR irradiation was performed using a diode laser system, and cells with or without nanotube treatment were irradiated by 808 nm laser at 5 W/cm2 for 2 min. Cell viability was examined by the calcein AM/ethidium homodimer-1 (EthD-1) staining. RESULTS: Using a Raman optical microscope, we found the Raman signal collected at single-cell level from the complex-treated SK-BR-3 cells was significantly greater than that from various control cells. NIR irradiation selectively destroyed the complex-targeted breast cancer cells without harming receptor-free cells. The cell death was effectuated without the need of internalization of SWNTs by the cancer cells, a finding that has not been reported previously. CONCLUSION: We have demonstrated that the HER2 IgY-SWNT complex specifically targeted HER2-expressing SK-BR-3 cells but not receptor-negative MCF-7 cells. The complex can be potentially used for both detection and selective photothermal ablation of receptor-positive breast cancer cells without the need of internalization by the cells. Thus, the unique intrinsic properties of SWNTs combined with high specificity and sensitivity of IgY antibodies can lead to new strategies for cancer detection and therapy.

Effective depth controls the nitrate removal rates in a water supply reservoir with a high nitrate load.

The Occoquan Reservoir is part of an indirect potable reuse system where a water reclamation plant (WRP) discharges a nitrified product water to prevent the onset of anaerobic conditions in the bottom sediments during the summer months. The elongated narrow shape of the reservoir combined with water temperature gradients in the inlet results in density currents that enhance the transport of nitrate from the surface to the bottom waters. The morphology of the reservoir also causes a longitudinal change in the ratio of water volume to sediment area, herein defined as the effective depth (ZED). Field observations revealed that first-order nitrate removal rate coefficients (k) varied inversely with ZED, suggesting that the upper reaches of the reservoir have a higher potential for nitrate removal compared to the areas closer to the dam. A similar relationship between k (d-1) and ZED was confirmed during laboratory experiments. Differences in k values were attributed mainly to the change in the nitrate supply rate as a result of the increase in water volume flowing over a specific sediment area, which limited nitrate transport to the sediments. The low variability found between the mass transfer coefficients for nitrate (Coefficient of Variation = 0.25) suggested a nearly constant biotic nitrogen removal and confirmed that k values were mainly affected by changes in ZED. Finally, similarities in k values between field and laboratory samples with similar ZED values suggested that different segments of natural systems may be properly downscaled to laboratory-sized configurations for analytical purposes by means of the ZED concept.

Separation, Sizing, and Quantitation of Engineered Nanoparticles in an Organism Model Using Inductively Coupled Plasma Mass Spectrometry and Image Analysis.

For environmental studies assessing uptake of orally ingested engineered nanoparticles (ENPs), a key step in ensuring accurate quantification of ingested ENPs is efficient separation of the organism from ENPs that are either nonspecifically adsorbed to the organism and/or suspended in the dispersion following exposure. Here, we measure the uptake of 30 and 60 nm gold nanoparticles (AuNPs) by the nematode, Caenorhabditis elegans, using a sucrose density gradient centrifugation protocol to remove noningested AuNPs. Both conventional inductively coupled plasma mass spectrometry (ICP-MS) and single particle (sp)ICP-MS are utilized to measure the total mass and size distribution, respectively, of ingested AuNPs. Scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDS) imaging confirmed that traditional nematode washing procedures were ineffective at removing excess suspended and/or adsorbed AuNPs after exposure. Water rinsing procedures had AuNP removal efficiencies ranging from 57 to 97% and 22 to 83%, while the sucrose density gradient procedure had removal efficiencies of 100 and 93 to 98%, respectively, for the 30 and 60 nm AuNP exposure conditions. Quantification of total Au uptake was performed following acidic digestion of nonexposed and Au-exposed nematodes, whereas an alkaline digestion procedure was optimized for the liberation of ingested AuNPs for spICP-MS characterization. Size distributions and particle number concentrations were determined for AuNPs ingested by nematodes with corresponding confirmation of nematode uptake via high-pressure freezing/freeze substitution resin preparation and large-area SEM imaging. Methods for the separation and in vivo quantification of ENPs in multicellular organisms will facilitate robust studies of ENP uptake, biotransformation, and hazard assessment in the environment.

Excitation-emission matrix fluorescence spectroscopy for natural organic matter characterization: a quantitative evaluation of calibration and spectral correction procedures.

The influence of different data collection procedures and of wavelength-dependent instrumental biases on fluorescence excitation-emission matrix (EEM) spectral analysis of aqueous organic matter samples was investigated. Particular attention was given to fluorescence contours (spectral shape) and peak fluorescence intensities. Instrumental bias was evaluated by independently applying excitation and emission correction factors to the raw excitation and emission data, respectively. The peak fluorescence intensities of representative natural organic matter and tryptophan were significantly influenced by the application of excitation and emission spectral correction factors and by the manner in which the raw data was collected. Humification and fluorescence indices were also influenced by emission correction factors but were independent of reference (excitation) intensity normalization or correction. EEM surface contours were dependent on normalization of the fluorescence intensity to the reference intensity but were not influenced by either excitation or emission spectral correction factors. Authors should be explicit in how excitation and emission spectral correction procedures are implemented in their investigations, which will help to facilitate intra-laboratory comparisons and data sharing.

Characterizing natural organic material from the Occoquan Watershed (Northern Virginia, US) using fluorescence spectroscopy and PARAFAC.

Surface water samples from the Occoquan Watershed (Virginia, US) were collected during summer baseflow conditions and characterized by excitation-emission matrix (EEM) fluorescence spectroscopy and parallel factor analysis (PARAFAC). Based on 55 samples, PARAFAC identified three individual fluorophore moieties, which were attributed to humic-like, fulvic-like, and protein-like materials. The categorization of these seemingly universal fluorophore moieties in aqueous systems was consistent with expected analyte concentrations that were independently measured by traditional wet chemistry techniques. The relative distribution of the three fluorophore fractions varied among the different land use catchments, especially in locations of known anthropogenic activity. Distinctive relationships between the fulvic-like and protein-like materials were observed for catchments known to be influenced by anthropogenic activity and those believed to reflect more natural environments, suggesting that this technique could be used to monitor human impact on aquatic systems. Finally, PARAFAC can be used to provide estimates (+/-30%) of select analyte concentrations in surface water. The results of this study support the use of EEM and PARAFAC analyses by watershed managers and other personnel interested in understanding organic matter behavior in aquatic systems.

Investigating activated sludge flocs using microanalytical techniques: demonstration of environmental scanning electron microscopy and time-of-flight secondary ion mass spectrometry for wastewater applications.

Environmental scanning electron microscopy (ESEM) with an energy-dispersive X-ray spectrometer (EDS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) were demonstrated to be useful analytical tools for investigating surface and bulk components of individual floc particles from both full- and bench-scale activated sludge systems. Detailed surface imaging of various hydrated biological floc particles by ESEM revealed substantial differences in surface features between treatment systems, while EDS identified spatial differences in the iron and the aluminum distributions. The ToF-SIMS spectra had signature fragments of protein and polysaccharide material from the floc surface, suggesting that this technique is capable of surface profiling extracellular polymeric substances. Principal-component analysis of the positive ion ToF-SIMS spectra from the mixed-liquor-suspended solid (MLSS) samples and reference aquatic organic materials found slight differences between the full- and bench-scale MLSS surface properties but substantial differences among MLSS and treated effluent from the same facility.

Asymmetric flow field flow fractionation with light scattering detection - an orthogonal sensitivity analysis.

Asymmetric flow field flow fractionation (AF4) has several instrumental factors that may have a direct effect on separation performance. A sensitivity analysis was applied to ascertain the relative importance of AF4 primary instrument factor settings for the separation of a complex environmental sample. The analysis evaluated the impact of instrumental factors namely, cross flow, ramp time, focus flow, injection volume, and run buffer concentration on the multi-angle light scattering measurement of natural organic matter (NOM) molar mass (MM). A 2(5-1) orthogonal fractional factorial design was used to minimize analysis time while preserving the accuracy and robustness in the determination of the main effects and interactions between any two instrumental factors. By assuming that separations resulting in smaller MM measurements would be more accurate, the analysis produced a ranked list of effects estimates for factors and interactions of factors based on their relative importance in minimizing the MM. The most important and statistically significant AF4 instrumental factors were buffer concentration and cross flow. The least important was ramp time. A parallel 2(5-2) orthogonal fractional factorial design was also employed on five environmental factors for synthetic natural water samples containing silver nanoparticles (NPs), namely: NP concentration, NP size, NOM concentration, specific conductance, and pH. None of the water quality characteristic effects or interactions were found to be significant in minimizing the measured MM; however, the interaction between NP concentration and NP size was an important effect when considering NOM recovery. This work presents a structured approach for the rigorous assessment of AF4 instrument factors and optimal settings for the separation of complex samples utilizing efficient orthogonal factional factorial design and appropriate graphical analysis.

The impact of floc size on respiration inhibition by soluble toxicants--a comparative investigation.

Activated sludge facilities are susceptible to upset by shock loads of toxic compounds. We hypothesized that floc size plays an important role in determining the sensitivity of mixed liquor to shock by cadmium and 2,4-dinitrophenol (DNP). To test this hypothesis, heterotrophic respiration inhibition experiments were conducted using mixed liquor from a pilot-scale membrane bioreactor (MBR) and full-scale activated sludge (FSAS) facility with gravity settling secondary clarifiers that were operated under similar process conditions. MBR mixed liquor flocs were both 41% smaller and 2 and 1.25 times more sensitive to equivalent soluble cadmium and DNP concentrations, respectively, compared to FSAS mixed liquor flocs. Similarly, FSAS mixed liquor that had been sheared (resulting in a smaller average floc diameter) was 1.5 times more sensitive to soluble cadmium than non-sheared FSAS mixed liquor. These results suggest that activated sludge process conditions that create smaller floc particles, such as the use of membranes for liquid-solid separation, are more susceptible to upset events caused by shock loads of cadmium and DNP. The particle size distribution (PSD) and average floc diameter of a mixed liquor suspension should be measured and reported when stating the inhibition concentration of a specific toxicant.

Impact of activated sludge-derived colloidal organic carbon on behavior of estrogenic agonist recombinant yeast bioassay.

The impact of size-fractionated colloidal organic carbon (COC) originating from a biological wastewater treatment facility on the sensitivity of the yeast estrogen screen (YES) bioassay containing the human estrogen receptor (hER) gene was evaluated. Dose-response curves of serially diluted 17beta-estradiol (E2), both in the presence and absence of COC, were generated by the YES bioassay. The concentration of E2 leading to a 50% YES response (effective concentration 50%, or EC50) was used to evaluate quantitatively the estrogenic activity of the different COC-E2 mixtures. The EC50 values for all COC size fractions, including COC-free samples (<1 kD), were statistically greater than the controls using Milli-Q water. Normalized EC50 values significantly increased as a function of COC concentration for the larger size fractions (>0.22 microm), but were not significantly affected by smaller COC material at environmental levels (1-5 mg/L), while both colloidal polysaccharide concentrations and colloidal fluorophores (measured at an excitation/emission wavelength pair of 350 nm/450 nm) appear to have an important role in the sensitivity of the YES bioassay. Estimates of the colloid-associated E2 fraction did not predict accurately increases in EC50 values. Matrix effects of the specific environment being tested with the YES bioassay need to be evaluated closely due to the sensitivity of the hER and reporter plasmid.

A comparison of membrane bioreactor and conventional-activated-sludge mixed liquor and biosolids characteristics.

Characteristics and behavior of raw and digested mixed liquor derived from a membrane bioreactor (MBR) and a full-scale activated-sludge (FSAS) facility were compared. The accumulation of nondegradable chemical oxygen demand in the MBR appears to play an important role in increasing the observed biological yield coefficient (Y(obs)), reducing average floc size, decreasing total suspended solids/total solids and volatile suspended solids/volatile solids (VS) ratios, and reducing specific-oxygen-uptake rates of the mixed liquor relative to FSAS-derived biological solids. Membrane bioreactor sludges exhibited lower VS destruction following 30 days mesophilic-anaerobic and aerobic digestion when compared to FSAS sludges. Significant deterioration in dewatering behavior was observed for the FSAS biosolids after anaerobic digestion and, to a lesser extent, following aerobic digestion. In comparison, digestion had a small affect on dewatering efficiency and conditioner requirements for MBR biosolids. Full-scale facilities using membrane separation may need to tailor digestion and dewatering processes to the specific characteristics of MBR sludges.

Evaluation of membrane bioreactor process capabilities to meet stringent effluent nutrient discharge requirements.

A six-stage membrane bioreactor (MBR) pilot plant was operated to determine and demonstrate the capability of this process to produce a low-nutrient effluent, consistent with the nutrient reduction goals for the Chesapeake Bay. Biological nitrogen removal was accomplished using a multistage configuration with an initial anoxic zone (using the carbon in the influent wastewater), an aerobic zone (where nitrification occurred), a downstream anoxic zone (where methanol was added as a carbon source), and the aerated submerged membrane zone. The capability to reliably reduce effluent total nitrogen to less than 3 mg/L as nitrogen (N) was demonstrated. A combination of biological (using an initial anaerobic zone) and chemical (using alum) phosphorus removal was used to achieve effluent total phosphate concentrations reliably less than 0.1 mg/L as phosphorus (P) and as low as 0.03 mg/L as P. Alum addition also appeared to enhance the filtration characteristics of the MBR sludge and to reduce membrane fouling. Aeration of the submerged membranes results in thickened sludge with a high dissolved oxygen concentration (approaching saturation), which can be recycled to the main aeration zone rather than to an anoxic or anaerobic zone to optimize biological nutrient removal. Biological nutrient removal was characterized using the International Water Association Activated Sludge Model No. 2d. The stoichiometry of chemical phosphorus removal was also consistent with conventional theory and experience. The characteristics of the solids produced in the MBR were compared with those of a parallel full-scale conventional biological nitrogen removal process and were generally found to be similar. These results provide valuable insight to the design and operating characteristics of MBRs intended to produce effluents with very low nutrient concentrations.