RESUMEN
Flexi-MOFs are typically limited to low-connected (<9) frameworks. Here we report a platform-wide approach capable of creating a family of high-connected materials (collectively called CPM-220) that integrate exceptional framework flexibility with high rigidity. We show that the multi-module nature of the pore-space-partitioned pacs (partitioned acs net) platform allows us to introduce flexibility as well as to simultaneously impose high rigidity in a tunable module-specific fashion. The inter-modular synergy has remarkable macro-morphological and sub-nanometer structural impacts. A prominent manifestation at both length scales is the retention of X-ray-quality single crystallinity despite huge hexagonal c-axial contraction (≈ 30%) and harsh sample treatment such as degassing and sorption cycles. CPM-220 sets multiple precedents and benchmarks on the pacs platform in both structural and sorption properties. They possess exceptionally high benzene/cyclohexane selectivity, unusual C3H6 and C3H8 isotherms, and promising separation performance for small gas molecules such as C2H2/CO2.
RESUMEN
Pore space partition (PSP) is an effective materials design method for developing high-performance small-pore materials for storage and separation of gas molecules. The continued success of PSP depends on broad availability and judicious choice of pore-partition ligands and better understanding of each structural module on stability and sorption properties. Here, by using substructural bioisosteric strategy (sub-BIS), a dramatic expansion of pore-partitioned materials is targeted by using ditopic dipyridyl ligands with non-aromatic cores or extenders, as well as by expanding heterometallic clusters to uncommon nickel-vanadium and nickel-indium clusters rarely known before in porous materials. The dual-module iterative refinement of pore-partition ligands and trimers leads to remarkable enhancement of chemical stability and porosity. Here a family of 23 pore-partitioned materials synthesized from five pore-partition ligands and seven types of trimeric clusters is reported. New materials with such compositionally and structurally diverse framework modules reveal key factors that dictate stability, porosity, and gas separation properties. Among these, materials based on heterometallic vanadium-nickel trimeric clusters give rise to the highest long-term hydrolytic stability and remarkable uptake capacity for CO2 , C2 H2 /C2 H4 /C2 H6 , and C3 H6 /C3 H8 hydrocarbon gases. The breakthrough experiment shows the potential application of new materials for separating gas mixtures such as C2 H2 /CO2 .
RESUMEN
A new perspective is proposed in the design of pore-space-partitioned MOFs that is focused on ligand symmetry properties sub-divided here into three hierarchical levels: 1) overall ligand, 2) ligand substructure such as backbone or core, and 3) the substituent groups. Different combinations of the above symmetry properties exist. Given the close correlation between nature of chemical moiety and its symmetry, such a unique perspective into ligand symmetry and sub-symmetry in MOF design translates into the influences on MOF properties. Five new MOFs have been prepared that exhibit excellent hydrothermal stability and high-performance adsorption properties with potential applications such as C3 H6 /C2 H4 and C2 H2 /CO2 selective adsorption. The combination of high stability with high benzene/cyclohexane selectivity of ≈13.7 is also of particular interest.
RESUMEN
A multi-stage core-expansion method is proposed here as one component of the integrative binding-site/extender/core-expansion (BEC) strategy. The conceptual deconstruction of the partitioning ligand into three editable parts draws our focus onto progressive core expansion and allows the optimization of both acetylene uptake and selectivity. The effectiveness of this strategy is shown through a family of eight cationic pore-partitioned materials containing three different partitioning ligands and various counter anions. The optimized structure, Co3 -cpt-tph-Cl (Hcpt=4-(p-carboxyphenyl)-1,2,4-triazole, H-tph=(2,5,8-tri-(4-pyridyl)-1,3,4,6,7,9-hexaazaphenalene) with the largest surface area and highest C2 H2 uptake capacity (200â cm3 /g at 298â K), also exhibits (desirably) the lowest CO2 uptake and hence the highest C2 H2 /CO2 selectivity. The successful boost in both C2 H2 capacity and IAST selectivity allows Co3 -cpt-tph-Cl to rank among the best crystalline porous materials, ionic MOFs in particular, for C2 H2 uptake and C2 H2 /CO2 experimental breakthrough separation.
RESUMEN
Multi-module design of framework materials with multiple distinct building blocks has attracted much attention because such materials are more amenable to compositional and geometrical tuning and thus offer more opportunities for property optimization. Few examples are known that use environmentally friendly and cost-effective solvent-free method to synthesize such materials. Here, we report the use of solvent-free method (also modulator-free) to synthesize a series of multi-module MOFs with high stability and separation property for C2 H2 /CO2 . The synthesis only requires simple mixing of reactants and short reaction time (2â h). Highly porous and stable materials can be made without any post-synthetic activation. The success of solvent-free synthesis of multi-module MOFs reflects the synergy between different modules, resulting in stable pore-partitioned materials, despite the fact that other competitive crystallization pathways with simpler framework compositions also exist.
RESUMEN
Pore space partitioning (PSP) is methodically suited for dramatically increasing the density of guest binding sites, leading to the partitioned acs (pacs) platform capable of record-high uptake for CO2 and small hydrocarbons such as C2Hx. For gas separation, achieving high selectivity amid PSP-enabled high uptake offers an enticing prospect. Here we aim for high selectivity by introducing the bioisosteric (BIS) concept, a widely used drug design strategy, into the realm of pore-space-partitioned MOFs. New pacs materials have high C2H2/CO2 selectivity of up to 29, high C2H2 uptake of up to 144 cm3/g (298 K, 1 atm), and high separation potential of up to 5.3 mmol/g, leading to excellent experimental breakthrough performance. These metrics, coupled with exceptional tunability, high stability, and low regeneration energy, demonstrate the broad potential of the BIS-PSP strategy.
Asunto(s)
Estructuras Metalorgánicas , Dióxido de Carbono , DeuterioRESUMEN
Two new rod-packing metal-organic frameworks (RPMOF) are constructed by regulating the in situ formation of the capping agent. In CPM-s7, carboxylate linkers extend 1D manganese-oxide chains in four additional directions, forming 3D RPMOF. The substitution of Mn2+ with a stronger Lewis acidic Co2+ , leads to an acceleration of the hydrolysis-prone sulfonate linker, resulting in presence of sulfate ions to reduce two out of the four carboxylate-extending directions, and thus forming a new 2D rod-packing CPM-s8. Density functional theory calculations and magnetization measurements reveal ferrimagnetic ordering of CPM-s8, signifying the potential of exploring 2D RPMOF for effective low-dimensional magnetic materials.
RESUMEN
We report here a strategy for making anionic pacs type porous materials by combining pore space partition with charge reallocation. The method uses the first negatively charged pore partition ligand (2,5,8-tri-(4-pyridyl)-1,3,4,6,7,9-hexaazaphenalene, H-tph) that simultaneously enables pore partition and charge reallocation. Over two dozen anionic pacs materials have been made to demonstrate their excellent chemical stability and a high degree of tunability. Notably, Ni3 -bdt-tph (bdt=1,4-benzeneditetrazolate) exhibits month-long water stability, while CoV-bdt-tph sets a new benchmark for C2 H2 storage capacity under ambient conditions for ionic MOFs. In addition to tunable in-framework modules, we show feasibility to tune the type and concentration of extra-framework counter cations and their influence on both stability and capability to separate industrial C3 H8 /C3 H6 and C6 H6 /C6 H12 mixtures.
RESUMEN
State-of-the-art MOFs are generally known for chemical stability at one end of the pH scale (i.e., pH < 0 or pH > 14). Herein, we report new Cr-MOFs capable of withstanding extreme pH conditions across approximately 16 pH units from pH < 0 to pH > 14, likely the largest observed pH range for MOFs. The integration of multiple stability-enhancing factors including nonlabile Cr3+, mixed Cr-N and Cr-O cross-links, and the highest possible connectivity by Cr3O trimers enables extraordinary chemical stability confirmed by both PXRD and gas adsorption. Notably, the base stability is much higher than literature Cr-MOFs, thereby revitalizing Cr-MOF's viability in the pursuit for the most chemically stable MOFs. Among known cationic MOFs, the chemical stability of these new Cr-MOFs is unmatchable, to our knowledge. These Cr-MOFs can be developed into multiseries of isoreticular MOFs with a rich potential for functionalization, pore size, and pore geometry engineering and applications.
RESUMEN
For rare-earth separation, selective crystallization into metal-organic frameworks (MOFs) offers new opportunities. Especially important is the development of MOF platforms with high selectivity toward target ions. Here we report a MOF platform (CPM-66) with low-coordination-number environment for rare-earth ions. This platform is highly responsive to the size variation of rare-earth ions and shows exceptional ion-size selectivity during crystallization. CPM-66 family are based on M3 O trimers (M=6-coordinated Sc, In, Er-Lu) that are rare for lanthanides. We show that the size matching between urea-type solvents and metal ions is crucial for their successful synthesis. We further show that CPM-66 enables a dramatic multi-fold increase in separation efficiency over CPM-29 with 7-coordinated ions. This work provides some insights into methods to prepare low-coordinate MOFs from large ions and such MOFs could serve as high-efficiency platforms for lanthanide separation, as well as other applications.
RESUMEN
An ideal material for C2H6/C2H4 separation would simultaneously have the highest C2H6 uptake capacity and the highest C2H6/C2H4 selectivity. But such material is elusive. A benchmark material for ethane-selective C2H6/C2H4 separation is peroxo-functionalized MOF-74-Fe that exhibits the best known separation performance due to its high C2H6/C2H4 selectivity (4.4), although its C2H6 uptake capacity is moderate (74.3 cm3/g). Here, we report a family of pore-space-partitioned crystalline porous materials (CPMs) with exceptional C2H6 uptake capacity and C2H6/C2H4 separation potential (i.e., C2H4 recovered from the mixture) despite their moderate C2H6/C2H4 selectivity (up to 1.75). The ethane uptake capacity as high as 166.8 cm3/g at 1 atm and 298 K, more than twice that of peroxo-MOF-74-Fe, has been achieved even though the isosteric heat of adsorption (21.9-30.4 kJ/mol) for these CPMs is as low as about one-third of that for peroxo-MOF-74-Fe (66.8 kJ/mol). While the overall C2H6/C2H4 separation potentials have not yet surpassed peroxo-MOF-74-Fe, these robust CPMs exhibit outstanding properties including high thermal stability (up to 450 °C) and aqueous stability, low regeneration energy, and a high degree of chemical and geometrical tunability within the same isoreticular framework.
RESUMEN
Introduction of pore partition agents into hexagonal channels of MIL-88 type (acs topology) endows materials with high tunability in gas sorption. Here, we report a strategy to partition acs framework into pacs (partitioned acs) crystalline porous materials (CPM). This strategy is based on insertion of inâ situ synthesized 4,4'-dipyridylsulfide (dps) ligands. One third of open metal sites in the acs net are retained in pacs MOFs; two thirds are used for pore-space partition. The Co2 V-pacs MOFs exhibit near or at record high uptake capacities for C2 H2 , C2 H4 , C2 H6 , and CO2 among MOFs. The storage capacity of C2 H2 is 234â cm3 g-1 (298â K) and 330â cm3 g-1 (273â K) at 1â atm for CPM-733-dps (the Co2 V-BDC form, BDC=1,4-benzenedicarboxylate). These high uptake capacities are accomplished with low heat of adsorption, a feature desirable for low-energy-cost adsorbent regeneration. CPM-733-dps is stable and shows no loss of C2 H2 adsorption capacity following multiple adsorption-desorption cycles.
RESUMEN
Zeolitic imidazolate frameworks (ZIFs) are traditionally synthesized solvothermally by using cost- and waste-incurring organic solvents. Here, a direct synthesis method is reported for ZIF-8, ZIF-67, and their heterometallic versions from solid precursors only. This solvent-free crystallization method not only completely avoids organic solvents, but also provides an effective path for the synthesis of homogeneous mixed-metal ZIFs. Furthermore, under templating by NaCl/ZnCl2 eutectic salt, carbonization of the ZIF materials gives rise to a series of N-containing high-surface-area carbon materials with impressive catalytic properties for the oxygen reduction reaction.
RESUMEN
Homochiral metal-organic frameworks (MOFs) are an important class of chiral solids with potential applications in chiral recognition; however, relatively few are available. Of great importance is the availability of low-cost, racemization-resistant, and versatile enantiopure building blocks. Among chiral building blocks, d-camphoric acid is highly prolific, yet, its trans-isomer, l-isocamphoric acid, has remained unknown in the entire field of solid-state materials. Its rich yet totally untapped synthetic and structural chemistry has now been investigated through the synthesis of a large family of homochiral metal isocamphorates. The first observation of diastereoisomerism in isostructural MOFs is presented. Isocamphorate has a powerful ability to create framework topologies unexpected from common inorganic building blocks, and isocamphoric acid should allow access to hundreds of new homochiral materials.
RESUMEN
Metal-Organic Frameworks (MOFs) can deliver many advantages when acting as enzyme mimics to assist with signal amplification in molecular detection: they have abundant active catalytic sites per unit volume of the material; their structures and elemental compositions are highly tunable, and their high specific surface area and porous property can assist with target separation and enrichment. In the present work, we have demonstrated that, by adding the pore partition agent, 2,4,6-tris(4-pyridyl)pyridine (TPY) during synthesis of the bimetallic Fe/Co-MIL-88(NH2) MOF to block the open metal sites, a highly porous MOF of Fe/Co-TPY-MIL-88(NH2) can be produced. This material also exhibits high stability in basic solutions and biofluids and possesses high peroxidase-mimicking activity, which can be utilized to produce long-lasting chemiluminescence (CL) from luminol and H2O2. Moreover, acting as the peroxidase-mimic, the Fe/Co-TPY-MIL-88(NH2) MOF can form the enzymatic cascade with glucose oxidase (GOx) for biomarker detection. When applied to detect extracellular vesicles (EVs), the MOF material and GOx are brought to the proximity on the EVs through two surface proteins, which triggers the enzyme cascade to produce high CL from glucose and luminol. EVs within the concentration range of 5 × 105 to 4 × 107 particles/mL can be detected with an LOD of 1 × 105 particles/mL, and the method can be used to analyze EV contents in human serum without sample preparation and EV purification. Overall, our work demonstrates that the high versatility and tunability of the MOF structures could bring in significant benefits to biosensing and enable ultrasensitive detection of biomarkers with judicious material designs.
Asunto(s)
Vesículas Extracelulares , Estructuras Metalorgánicas , Humanos , Estructuras Metalorgánicas/química , Luminiscencia , Luminol/química , Peróxido de Hidrógeno/química , Peroxidasas/metabolismo , Peroxidasa , Glucosa Oxidasa/química , Vesículas Extracelulares/metabolismoRESUMEN
We report here a one-step method for synthesizing multi-component and in-situ-formed homochiral spiroborate-ester-based metal-organic framework CPM-B1. This unique material successfully integrates COF fragment spiroborate ester within the MOF and simultaneously incorporate homochirality and helicity. In addition, CPM-B1 is a rare example of framework materials that results from the cooperative assembly of three charge-complementary cations: +1 (lithium), +2 (cobalt), and +3 (boron). The sophistication of the co-assembly is further highlighted by the three structural roles of lithium ions. This unique structure contributes to its multi-functional properties such as ionic conductivity and catalytic activity for oxygen reduction reaction (by CPM-B1 carbonized material) and provides a new path to develop MOF materials with complex secondary building units and multi-functional applications.
Asunto(s)
Estructuras Metalorgánicas , Estructuras Metalorgánicas/química , Ésteres , Litio , Cationes , CobaltoRESUMEN
Metal-organic frameworks (MOFs) have many attractive features, including tunable composition, rigid structure, controllable pore size, and large specific surface area, and thus are highly applicable in molecular analysis. Depending on the MOF structure, a high number of unsaturated metal sites can be exposed to catalyze chemical reactions. In the present work, we report that using both Co(II) and Fe(III) to prepare the MIL-88(NH2) MOF, we can produce the bimetallic MOF that can catalyze the conversion of 3,3',5,5â³-tetramethylbenzidine (TMB) to a color product through a reaction with H2O2 at a higher reaction rate than the monometallic Fe-MIL-88(NH2). The Michaelis constants (Km) of the catalytic reaction for TMB and H2O2 are 3-5 times smaller, and the catalytic constants (kcat) are 5-10 times higher than those of the horseradish peroxidase (HRP), supporting ultrahigh peroxidase-like activity. These values are also much more superior to those of the HRP-mimicking MOFs reported previously. Interestingly, the bimetallic MOF can be coupled with glucose oxidase (GOx) to trigger the cascade enzymatic reaction for highly sensitive detection of extracellular vesicles (EVs), a family of important biomarkers. Through conjugation to the aptamer that recognizes the marker protein on EV surface, the MOF can help isolate the EVs from biological matrices, which are subsequently labeled by GOx via antibody recognition. The cascade enzymatic reaction between MOF and GOx enables the detection of EVs at a concentration as low as 7.8 × 104 particles/mL. The assay can be applied to monitor EV secretion by cultured cells and also can successfully detect the different EV quantities in the sera samples collected from cancer patients and healthy controls. Overall, we prove that the bimetallic Fe/Co-MIL-88(NH2) MOF, with its high peroxidase activity and high biocompatibility, is a valuable tool deployable in clinical assays to facilitate disease diagnosis and prognosis.
Asunto(s)
Vesículas Extracelulares , Estructuras Metalorgánicas , Bencidinas , Colorimetría , Colorantes/química , Vesículas Extracelulares/química , Compuestos Férricos , Glucosa Oxidasa/metabolismo , Peroxidasa de Rábano Silvestre , Peróxido de Hidrógeno/química , Estructuras Metalorgánicas/química , Peroxidasa/química , Peroxidasas/químicaRESUMEN
The development of effective propane (C3H8)-selective adsorbents for the purification of propylene (C3H6) from C3H8/C3H6 mixture is a promising alternative to replace the energy-intensive cryogenic distillation. However, few materials possess the dual desirable features of propane selectivity and high uptake capacity. Here, we report a family of pore-space-partitioned crystalline porous materials (CPM) with remarkable C3H8 uptake capacity (up to 10.9 mmol/g) and the highly desirable yet uncommon C3H8 selectivity (up to 1.54 at 0.1 bar and 1.44 at 1 bar). The selectivity-capacity synergy endows them with record-performing C3H8/C3H6 separation potential (i.e., C3H6 recovered from the mixture). Moreover, these CPMs exhibit outstanding properties including high stability, low regeneration energy, and multimodular chemical and geometrical tunability within the same isoreticular framework. The high C3H8/C3H6 separation performance was further confirmed by the breakthrough experiments.