Cooperative Effects of Heterodinuclear IrIII-MII Complexes on Catalytic H2 Evolution from Formic Acid Dehydrogenation in Water.

Novel heterodinuclear IrIII-MII complexes (M = Co, Ni, or Cu) with two adjacent reaction sites were synthesized by using 3,5-bis(2-pyridyl)-pyrazole (Hbpp) as a structure-directing ligand and employed as catalysts for H2 evolution through formic acid dehydrogenation in water. A cooperative effect of the hetero-metal centers was observed in the H2 evolution in comparison with the corresponding mononuclear IrIII and MII complexes as the components of the IrIII-MII complexes. The H2 evolution rate for the IrIII-MII complexes was at most 350-fold higher than that of the mononuclear IrIII complex. The catalytic activity increased in the following order: IrIII-CuII complex < IrIII-CoII complex < IrIII-NiII complex . The IrIII-H intermediates of the IrIII-MII complexes were successfully detected by ultraviolet-visible, 1H nuclear magnetic resonance, and ESI-TOF-MS spectra. The catalytic enhancement of H2 evolution by the IrIII-MII complexes indicates that the IrIII-H species formed in the IrIII moiety act as reactive species and the MII moieties act as acceleration sites by the electronic effect from the MII center to the IrIII center through the bridging bpp- ligand. The IrIII-MII complexes may also activate H2O at the 3d MII centers as a proton source to facilitate H2 evolution. In addition, the affinity of formate for the IrIII-MII complexes was investigated on the basis of Michaelis-Menten plots; the IrIII-CoII and IrIII-NiII complexes exhibited affinities that were relatively higher than that of the IrIII-CuII complex. The catalytic mechanism of H2 evolution by the IrIII-MII complexes was revealed on the basis of spectroscopic detection of reaction intermediates, kinetic analysis, and isotope labeling experiments.

Efficient Photocatalytic CO2 Reduction by a Ni(II) Complex Having Pyridine Pendants through Capturing a Mg2+ Ion as a Lewis-Acid Cocatalyst.

We have synthesized a new Ni(II) complex having an S2N2-tetradentate ligand with two noncoordinating pyridine pendants as binding sites of Lewis-acidic metal ions in the vicinity of the Ni center, aiming at efficient CO production in photocatalytic CO2 reduction. In the presence of Mg2+ ions, enhancement of selective CO formation was observed in photocatalytic CO2 reduction by the Ni complex with the pyridine pendants through the formation of a Mg2+-bound species, as compared to the previously reported Ni complex without the Lewis-acid capturing sites. A higher quantum yield of CO evolution for the Mg2+-bound Ni complex was determined to be 11.1%. Even at lower CO2 concentration (5%), the Ni complex with the pendants exhibited comparable CO production to that at the CO2-saturated concentration (100%). The Mg2+-bound Ni complex was evidenced by mass spectrometry and 1H NMR measurements. The enhancement of CO2 reduction by the Mg2+-bound species should be derived from cooperativity between the Ni and Mg centers for the stabilization of a Ni-CO2 intermediate by a Lewis-acidic Mg2+ ion captured in the vicinity of the Ni center, as supported by DFT calculations. The detailed mechanism of photocatalytic CO2 reduction by the Ni complex with the pyridine pendants in the presence of Mg2+ ions is discussed based on spectroscopic detection of the intermediate and kinetic analysis.

Mechanistic Insight into Dioxygen Evolution from Diastereomeric µ-Peroxo Dinuclear Co(III) Complexes Based on Stoichiometric Electron-Transfer Oxidation.

Stoichiometric electron-transfer (ET) oxidation of two diastereomeric µ-peroxo-µ-hydroxo dinuclear Co(III) complexes with tris(2-pyridylmethyl)amine (TPA) was examined to scrutinize the reaction mechanism of O2 evolution from the peroxo complexes, as seen in the final step in water oxidation by a Co(III)-TPA complex. The two isomeric Co(III)-peroxo complexes were synthesized and selectively isolated by recrystallization under different conditions. Although cyclic voltammograms of the two isomers in aqueous solutions showed one reversible wave at 1.1 V vs NHE at pH 2.0, two oxidation waves were observed at 1.0 and 1.4 V at pH 7.0 in the aqueous solutions, the latter of which is responsible for the O2-releasing process. At pH 7, one diastereomer showed higher reactivity than the other in O2 evolution, indicating the importance of structures of the µ-peroxo complexes in the reaction. In order to clarify the O2-evolving mechanism, we performed electron paramagnetic resonance (EPR) and resonance Raman (RR) measurements for characterizing one-electron oxidized species: The observed EPR and RR signals supported the formation of µ-superoxo-µ-hydroxo dinuclear Co(III) complexes; however, no characteristic difference was observed between two isomers in the EPR parameters including g values and superhyperfine coupling constants. ET-oxidation rate constants of the isomers were determined to be much faster than the O2-evolving rate constants, indicating that the O2-releasing step is the rate-determining step in the O2 evolution through the stoichiometric ET oxidation of the dinuclear Co(III)-µ-peroxo complexes. Therefore, the difference of reactivity in the O2 evolution for the two isomers should be derived from the thermodynamic stability of two-electron oxidized species of the dinuclear Co(III)-µ-peroxo complexes, µ-dioxygen-µ-hydroxo dinuclear Co(III) intermediates.

Mechanistic Insight into Synergistic Catalysis of Olefin Hydrogenation by a Hetero-Dinuclear RuII-CoII Complex with Adjacent Reaction Sites.

We have designed and synthesized a hetero-dinuclear RuII-CoII complex with a dinucleating ligand inspired by hetero-dinuclear active sites of metalloenzymes. A synergistic effect between the adjacent RuII and CoII sites has been confirmed in catalytic olefin hydrogenation by the complex, exhibiting a much higher turnover number than those of mononuclear RuII or CoII complexes as the components. A RuII-hydrido species was detected by 1H NMR and electrospray ionization (ESI)-time-of-flight (TOF)-MS measurements as an intermediate to react with olefins, and CoII-bound methanol was suggested to act as a proton source.

Titania-Catalyzed H2O2 Thermal Oxidation of Styrenes to Aldehydes.

We investigated the selective oxidation of styrenes to benzaldehydes by using a non-irradiated TiO2-H2O2 catalytic system. The oxidation promotes multi-step reactions from styrenes, including the cleavage of a C=C double bond and the addition of an oxygen atom selectively and stepwise to provide the corresponding benzaldehydes in good yields (up to 72%). These reaction processes were spectroscopically shown by fluorescent measurements under the presence of competitive scavengers. The absence of the signal from OH radicals indicates the participation of other oxidants such as hydroperoxy radicals (•OOH) and superoxide radicals (•O2-) into the selective oxidation from styrene to benzaldehyde.

Mechanistic Insights into Homogeneous Electrocatalytic and Photocatalytic Hydrogen Evolution Catalyzed by High-Spin Ni(II) Complexes with S2N2-Type Tetradentate Ligands.

We report homogeneous electrocatalytic and photocatalytic H2 evolution using two Ni(II) complexes with S2N2-type tetradentate ligands bearing two different sizes of chelate rings as catalysts. A Ni(II) complex with a five-membered SC2S-Ni chelate ring (1) exhibited higher activity than that with a six-membered SC3S-Ni chelate ring (2) in both electrocatalytic and photocatalytic H2 evolution despite both complexes showing the same reduction potentials. A stepwise reduction of the Ni center from Ni(II) to Ni(0) was observed in the electrochemical measurements; the first reduction is a pure electron transfer reaction to form a Ni(I) complex as confirmed by electron spin resonance measurements, and the second is a 1e-/1H+ proton-coupled electron transfer reaction to afford a putative Ni(II)-hydrido (NiII-H) species. We also clarified that Ni(II) complexes can act as homogeneous catalysts in the electrocatalytic H2 evolution, in which complex 1 exhibited higher reactivity than that of 2. In the photocatalytic system using [Ru(bpy)3]2+ as a photosensitizer and sodium ascorbate as a reductant, complex 1 with the five-membered chelate ring also showed higher catalytic activity than that of 2 with the six-membered chelate ring, although the rates of photoinduced electron-transfer processes were comparable. The Ni-H bond cleavage in the putative NiII-H intermediate should be involved in the rate-limiting step as evidenced by kinetic isotope effects observed in both photocatalytic and electrocatalytic H2 evolution. Kinetic analysis and density functional theory calculations indicated that the difference in H2 evolution activity between the two complexes was derived from that of activation barriers of the reactions between the NiII-H intermediates and proton, which is consistent with the fact that increase of proton concentration accelerates the H2 evolution.

Visible-Light-Driven Photocatalytic CO2 Reduction by a Ni(II) Complex Bearing a Bioinspired Tetradentate Ligand for Selective CO Production.

A Ni(II) complex bearing an S2N2-type tetradentate ligand inspired by the active site of carbon monoxide dehydrogenase was found to selectively catalyze CO2 reduction to produce CO in a photocatalytic system using [Ru(bpy)3]2+ (bpy = 2,2'-bipyridine) as a photosensitizer and 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH) as an electron donor. The Ni(II) complex shows a high turnover number over 700 with high CO selectivity of >99% and quantum yield of 1.42% in the photocatalytic system.

A Molecular Surface Functionalization Approach to Tuning Nanoparticle Electrocatalysts for Carbon Dioxide Reduction.

Conversion of the greenhouse gas carbon dioxide (CO2) to value-added products is an important challenge for sustainable energy research, and nanomaterials offer a broad class of heterogeneous catalysts for such transformations. Here we report a molecular surface functionalization approach to tuning gold nanoparticle (Au NP) electrocatalysts for reduction of CO2 to CO. The N-heterocyclic (NHC) carbene-functionalized Au NP catalyst exhibits improved faradaic efficiency (FE = 83%) for reduction of CO2 to CO in water at neutral pH at an overpotential of 0.46 V with a 7.6-fold increase in current density compared to that of the parent Au NP (FE = 53%). Tafel plots of the NHC carbene-functionalized Au NP (72 mV/decade) vs parent Au NP (138 mV/decade) systems further show that the molecular ligand influences mechanistic pathways for CO2 reduction. The results establish molecular surface functionalization as a complementary approach to size, shape, composition, and defect control for nanoparticle catalyst design.

Homogeneous Photocatalytic Water Oxidation with a Dinuclear Co(III)-Pyridylmethylamine Complex.

A bis-hydroxo-bridged dinuclear Co(III)-pyridylmethylamine complex (1) was synthesized and the crystal structure was determined by X-ray crystallography. Complex 1 acts as a homogeneous catalyst for visible-light-driven water oxidation by persulfate (S2O8(2-)) as an oxidant with [Ru(II)(bpy)3](2+) (bpy = 2,2'-bipyridine) as a photosensitizer affording a high quantum yield (44%) with a large turnover number (TON = 742) for O2 formation without forming catalytically active Co-oxide (CoO(x)) nanoparticles. In the water-oxidation process, complex 1 undergoes proton-coupled electron-transfer (PCET) oxidation as a rate-determining step to form a putative dinuclear bis-µ-oxyl Co(III) complex (2), which has been suggested by DFT calculations. Catalytic water oxidation by 1 using [Ru(III)(bpy)3](3+) as an oxidant in a H2(16)O and H2(18)O mixture was examined to reveal an intramolecular O-O bond formation in the two-electron-oxidized bis-µ-oxyl intermediate, prior to the O2 evolution.

Artificial photosynthesis for sustainable fuel and chemical production.

The apparent incongruity between the increasing consumption of fuels and chemicals and the finite amount of resources has led us to seek means to maintain the sustainability of our society. Artificial photosynthesis, which utilizes sunlight to create high-value chemicals from abundant resources, is considered as the most promising and viable method. This Minireview describes the progress and challenges in the field of artificial photosynthesis in terms of its key components: developments in photoelectrochemical water splitting and recent progress in electrochemical CO2 reduction. Advances in catalysis, concerning the use of renewable hydrogen as a feedstock for major chemical production, are outlined to shed light on the ultimate role of artificial photosynthesis in achieving sustainable chemistry.

Water oxidation catalysis with nonheme iron complexes under acidic and basic conditions: homogeneous or heterogeneous?

Thermal water oxidation by cerium(IV) ammonium nitrate (CAN) was catalyzed by nonheme iron complexes, such as Fe(BQEN)(OTf)2 (1) and Fe(BQCN)(OTf)2 (2) (BQEN = N,N'-dimethyl-N,N'-bis(8-quinolyl)ethane-1,2-diamine, BQCN = N,N'-dimethyl-N,N'-bis(8-quinolyl)cyclohexanediamine, OTf = CF3SO3(-)) in a nonbuffered aqueous solution; turnover numbers of 80 ± 10 and 20 ± 5 were obtained in the O2 evolution reaction by 1 and 2, respectively. The ligand dissociation of the iron complexes was observed under acidic conditions, and the dissociated ligands were oxidized by CAN to yield CO2. We also observed that 1 was converted to an iron(IV)-oxo complex during the water oxidation in competition with the ligand oxidation. In addition, oxygen exchange between the iron(IV)-oxo complex and H2(18)O was found to occur at a much faster rate than the oxygen evolution. These results indicate that the iron complexes act as the true homogeneous catalyst for water oxidation by CAN at low pHs. In contrast, light-driven water oxidation using [Ru(bpy)3](2+) (bpy = 2,2'-bipyridine) as a photosensitizer and S2O8(2-) as a sacrificial electron acceptor was catalyzed by iron hydroxide nanoparticles derived from the iron complexes under basic conditions as the result of the ligand dissociation. In a buffer solution (initial pH 9.0) formation of the iron hydroxide nanoparticles with a size of around 100 nm at the end of the reaction was monitored by dynamic light scattering (DLS) in situ and characterized by X-ray photoelectron spectra (XPS) and transmission electron microscope (TEM) measurements. We thus conclude that the water oxidation by CAN was catalyzed by short-lived homogeneous iron complexes under acidic conditions, whereas iron hydroxide nanoparticles derived from iron complexes act as a heterogeneous catalyst in the light-driven water oxidation reaction under basic conditions.

Catalytic activity of NiMnO3 for visible light-driven and electrochemical water oxidation.

NiMnO3 was found to be an efficient catalyst for light-driven water oxidation using [Ru(bpy)3](2+) and S2O8(2-) as a photosensitiser and a sacrificial oxidant, respectively. NiMnO3 exhibited remarkably high catalytic activity in comparison with manganese oxides and nickel oxide. For electrochemical water oxidation, the highest catalytic current was also obtained with NiMnO3 among the manganese oxides.

Selective Detection of Toxic C1 Chemicals Using a Hydroxylamine-Based Chemiresistive Sensor Array.

Formaldehyde (FA) is a deleterious C1 pollutant commonly found in the interiors of modern buildings. C1 chemicals are generally more toxic than the corresponding C2 chemicals, but the selective discrimination of C1 and C2 chemicals using simple sensory systems is usually challenging. Here, we report the selective detection of FA vapor using a chemiresistive sensor array composed of modified hydroxylamine salts (MHAs, ArCH2ONH2·HCl) and single-walled carbon nanotubes (SWCNT). By screening 32 types of MHAs, we have identified an ideal sensor array that exhibits a characteristic response pattern for FA. Thus, trace FA (0.02-0.05 ppm in air) can be clearly discriminated from the corresponding C2 chemical, acetaldehyde (AA). This system has been extended to discriminate methanol (C1) from ethanol (C2) in combination with the catalytic conversion of these alcohols to their corresponding aldehydes. Our system offers portable and reliable chemical sensors that discriminate the subtle differences between C1 and C2 chemicals, enabling advanced environmental monitoring and healthcare applications.

Catalysis of nickel ferrite for photocatalytic water oxidation using [Ru(bpy)3]2+ and S2O8(2-).

Single or mixed oxides of iron and nickel have been examined as catalysts in photocatalytic water oxidation using [Ru(bpy)(3)](2+) as a photosensitizer and S(2)O(8)(2-) as a sacrificial oxidant. The catalytic activity of nickel ferrite (NiFe(2)O(4)) is comparable to that of a catalyst containing Ir, Ru, or Co in terms of O(2) yield and O(2) evolution rate under ambient reaction conditions. NiFe(2)O(4) also possesses robustness and ferromagnetic properties, which are beneficial for easy recovery from the solution after reaction. Water oxidation catalysis achieved by a composite of earth-abundant elements will contribute to a new approach to the design of catalysts for artificial photosynthesis.

LaCoO3 acting as an efficient and robust catalyst for photocatalytic water oxidation with persulfate.

Cobalt-containing metal oxides [perovskites (LaCoO(3), NdCoO(3), YCoO(3), La(0.7)Sr(0.3)CoO(3)), spinel (Co(3)O(4)) and wolframite (CoWO(4))] have been examined as catalysts for photocatalytic water oxidation with Na(2)S(2)O(8) and [Ru(bpy)(3)](2+) as an electron acceptor and a photosensitizer, respectively. Catalysts with the perovskite structure exhibited higher catalytic activity as compared with the catalysts with the spinel and wolframite structures. LaCoO(3), which stabilizes Co(III) species in the perovskite structure, exhibited the highest catalytic activity in the photocatalytic water oxidation compared with CoWO(4), Co(3)O(4) and La(0.7)Sr(0.3)CoO(3) which contain Co(II) or Co(IV) species in the matrices. The high catalytic reactivity of LaCoO(3) possessing perovskite structure was maintained in NdCoO(3) and YCoO(3) which exclusively contain Co(III) species. Thus, the catalytic activity of Co ions can be controlled by the additional metal ions, which leads to development of highly reactive and robust catalysts for the photocatalytic water oxidation.

Laser Ablation Nanoarchitectonics of Au-Cu Alloys Deposited on TiO2 Photocatalyst Films for Switchable Hydrogen Evolution from Formic Acid Dehydrogenation.

The regulation of H2 evolution from formic acid dehydrogenation using recyclable photocatalyst films is an essential approach for on-demand H2 production. We have successfully generated Au-Cu nanoalloys using a laser ablation method and deposited them on TiO2 photocatalyst films (Au x Cu100-x /TiO2). The Au-Cu/TiO2 films were employed as photocatalysts for H2 production from formic acid dehydrogenation under light-emitting diode (LED) irradiation (365 nm). The highest H2 evolution rate for Au20Cu80/TiO2 is archived to 62,500 µmol h-1 g-1 per photocatalyst weight. The remarkable performance of Au20Cu80/TiO2 may account for the formation of Au-rich surfaces and the effect of Au alloying that enables Cu to sustain the metallic form on its surface. The metallic Au-Cu surface on TiO2 is vital to supply the photoexcited electrons of TiO2 to its surface for H2 evolution. The rate-determining step (RDS) is identified as the reaction of a surface-active species with protons. The results establish a practical preparation of metal alloy deposited on photocatalyst films using laser ablation to develop efficient photocatalysts.

Catalytic mechanism of water oxidation with single-site ruthenium-heteropolytungstate complexes.

Catalytic water oxidation to generate oxygen was achieved using all-inorganic mononuclear ruthenium complexes bearing Keggin-type lacunary heteropolytungstate, [Ru(III)(H(2)O)SiW(11)O(39)](5-) (1) and [Ru(III)(H(2)O)GeW(11)O(39)](5-) (2), as catalysts with (NH(4))(2)[Ce(IV)(NO(3))(6)] (CAN) as a one-electron oxidant in water. The oxygen atoms of evolved oxygen come from water as confirmed by isotope-labeled experiments. Cyclic voltammetric measurements of 1 and 2 at various pH's indicate that both complexes 1 and 2 exhibit three one-electron redox couples based on ruthenium center. The Pourbaix diagrams (plots of E(1/2) vs pH) support that the Ru(III) complexes are oxidized to the Ru(V)-oxo complexes with CAN. The Ru(V)-oxo complex derived from 1 was detected by UV-visible absorption, EPR, and resonance Raman measurements in situ as an active species during the water oxidation reaction. This indicates that the Ru(V)-oxo complex is involved in the rate-determining step of the catalytic cycle of water oxidation. The overall catalytic mechanism of water oxidation was revealed on the basis of the kinetic analysis and detection of the catalytic intermediates. Complex 2 exhibited a higher catalytic reactivity for the water oxidation with CAN than did complex 1.

Hydrogen peroxide production from oxygen and formic acid by homogeneous Ir-Ni catalyst.

Hydrogen peroxide was directly produced from oxygen and formic acid, catalysed by a hetero-dinuclear Ir-Ni complex with two adjacent sites, at ambient temperature. Synergistic catalysis derived from the hetero-dinuclear Ir and Ni centres was demonstrated by comparing its activity to those of the component mononuclear Ir and Ni complexes. A reaction intermediate of Ir-hydrido was detected by UV-vis, ESI-TOF-MS, and 1H NMR spectroscopies. It was revealed that the Ir moiety serves as an active species of Ir-hydrido, reacting with oxygen to afford an Ir-hydroperoxide species through O2 insertion, which is the rate-determining step for H2O2 production. Meanwhile, the Ni moiety promotes H2O2 formation by activating solvents as proton sources. We also found that H2O2 production is strongly affected by the solvent dielectric constants (DE); the highest H2O2 concentration was obtained in ethylene glycol with a moderate DE. The catalytic mechanism of H2O2 production by the Ir-Ni complex was discussed, based on kinetic analysis, isotope labelling experiments, and theoretical DFT calculations.

Formate-driven catalysis and mechanism of an iridium-copper complex for selective aerobic oxidation of aromatic olefins in water.

A hetero-dinuclear IrIII-CuII complex with two adjacent sites was employed as a catalyst for the aerobic oxidation of aromatic olefins driven by formate in water. An IrIII-H intermediate, generated through formate dehydrogenation, was revealed to activate terminal aromatic olefins to afford an Ir-alkyl species, and the process was promoted by a hydrophobic [IrIII-H]-[substrate aromatic ring] interaction in water. The Ir-alkyl species subsequently reacted with dioxygen to yield corresponding methyl ketones and was promoted by the presence of the CuII moiety under acidic conditions. The IrIII-CuII complex exhibited cooperative catalysis in the selective aerobic oxidation of olefins to corresponding methyl ketones, as evidenced by no reactivities observed from the corresponding mononuclear IrIII and CuII complexes, as the individual components of the IrIII-CuII complex. The reaction mechanism afforded by the IrIII-CuII complex in the aerobic oxidation was disclosed by a combination of spectroscopic detection of reaction intermediates, kinetic analysis, and theoretical calculations.